Electrical wiring including procurement of electrical fittings and labor charges for new inspection quarter at Chandrabhaga Lighthouse, Odisha.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.

2 Module (75mm * 75mm)

3 Module (100mm * 75mm)

4 Module (125mm * 75mm)

6 Module (200mm * 75mm)

8 Module (1200mm * 75mm)

12 Module (200mm * 150mm)

Wiring for twin control light point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class pvc conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc as required.

Supplying and fixing of metal box of following sizes (normal sizes) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

100mmX100mmX60mm deep

150mmX150mmX60mm deep

200mmX250mmX60mm deep

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

6/10 Amp switch

2-way 10 Amp switch

16/20 Amp switch

3 pin 6/10 Amp socket outlet

6 pin 16/20 Amp socket outlet

Telephone socket outlet, 1-Module

TV antenna socket outlet, 1-Module

Bell push -2Moduler.

Supply and fixing call bell/ buzzer suitable for single phase, 230V complete as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Installation, testing, commissioning of wall bracket/ ceiling fittings of all sizes and shapes containing up to two GLS/CFL/LED lamps per fitting, complete with all accessories including connection etc as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing two module stepped type electronic fan regulator (1-M) on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.( Up to 450 mm Sweep)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25A modular socket outlet and 25A modular DP MCB C curve including connection, painting etc as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

2 x 1.5 sq. mm

3 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

3 x 6 sq. mm

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. (1-Pair)

Supply and drawing co-axial RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with sheath in the existing surface/recessed steel/ PVC conduit as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted\ including earthing etc. as required. (But without MCB/RCCB /Isolator)

12 way, Double door

Supplying and fixing of following ways surface/recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.(Note- vertical type MCB TPDB is normally used where 3-phase outlets are required)

4 way (4 + 12), Double door.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 6A-4nos,/10A-4nos/16A-6nos

Double pole 32A

Earthing with G.I earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. Pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Labour charges for laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. (up to 35 sq mm.)

Indicator 1-Modular. Make- Reputed

Exhaust Fan,200mm ,ventilating air brisk fan. Make-Reputed

Wall mounting revolving fan. 400 mm sweep. Make- Reputed .

LED Mirror Light, 9 Watt, 1-feet. Make- Reputed

LED Foot Light, 4-Modular. Make- Reputed

DC multi tone Door bell. Make- Reputed

Chain LED light, blue colour, 5mtr length with driver. Make- Reputed

Ceiling light decorative chandelier with three colour with remote.

LED single bracket light with decorative glass. Make- Reputed

Ceiling Fan, Electro-phonetic lacquered/Electroplated surface for anti-rusting, High speed fan with wider tip blade for effective air circulation with Sweep 1200mm and High performance even at low voltage, Make- Reputed

16 Amp, 3-pin top. Make- Reputed

5 inch round hylam sheet of 4mm thick.

CI round Junction box, 1'' and 3/4'', 2mm thick (1 to 4 way). 1-way-40nos, 2-way-40 nos, 3-way-20nos, 4-way-20nos. (1”-60nos & ¾”-60nos)

Installation charges of electric Geyser with 1-set of hot and cold pipe.

Installation charges of split Air Conditioner units.

Supply of Fan Rod of length- 2feet/2.5feet.

MEPF INFRA

Labard Instruchem Private Limited