Loading…
Loading…
Tender Value
₹20 L
EMD Value
₹20,000
Closing Date
25 May 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
add.city.engineer (amc met/Hospital)
Necessary civil repairing and Maintenance works in L.g.hospital diff building at maninagar L.g.hospital campus.
302323
tender 06 tender notice 1
Open
Civil Works
Ahmedabad
3 documents required · 3 mandatory
₹900
Municipal Comissioner Ahmedabad
₹20,000
7 May 2026
7 May 2026
7 May 2026
25 May 2026
7 May 2026
Name of Work:- Necessary civil repairing and Maintenance works in L.g.hospital diff building at
maninagar L.g.hospital campus.
AHMEDABAD MUNICIPAL CORPORATION
AMC MET/HOSPITAL
Name Of Work :- Necessary civil repairing and Maintenance works in L.g.hospital diff building at maninagar
L.g.hospital campus.
S.R.NO Items Rate Amount
Excavation for foundation upto 1.5 m depth
including sorting out and stacking of useful materials
1 1.00 and disposing off the excavated stuff upto 50 Meter cu.m 115.92
lead.(A) Loose or soft soil.( iteam code 04001A ,S.O.R
Ahemdabad City 2023-24)
Excavation for foundation upto 1.5 m depth including sorting
out and stacking of useful materials and disposing off the
2 1.00 excavated stuff upto 50 Meter lead.(B) Dense or Hard soil.( cu.m 148.19
iteam code 04001B ,S.O.R Ahemdabad City 2023-24)
Excavation for foundation for depth from 1.5 m to 3.0 m
including sorting out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter lead.(A)
3 1.00 Loose or soft soil.( iteam code 04002A ,S.O.R Ahemdabad cu.m 128.52
Excavation for foundation for depth from 1.5 m to 3.0 m
including sorting out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter lead.(B)
4 1.00 Dense or Hard soil.( iteam code 04002B ,S.O.R Ahemdabad cu.m 160.77
Excavation for foundation for depth from 3.0 m to 5.0 m
including sorting out and stacking of useful materials
and disposing off the excavated stuff upto
5 1.00 Meter lead.(A) Loose or soft soil.( iteam cu.m 141.11
code04003A,S.O.R Ahemdabad City 2023-24)
Excavation for foundation for depth from 3.0 m to 5.0 m
including sorting out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter lead.(B)
6 1.00 Dense or Hard soil.( iteam code04003B,S.O.R Ahemdabad cu.m 172.50
Filling available excavated earth (excluding rock) in
trenches. plinth, sides of foundations etc. in layers not
exceeding 20 cm. in depth consolidating each disposited
7 1.00 layer by ramming and watering.( iteam code 4006,4.12,S.O.R cu.m 129.10
Ahemdabad City 2023-24)
Filling in plinth with sand under floors including watering
ramming, consolidating and dressing complete.(iteam code
8 1.00 4007A,4.24,S.O.R Ahemdabad City 2023-24) cu.m 455.63
Filling in foundation and plinth with murrum or selected
soil in layers of 20cm. thickness including watering,
9 1.00 ramming and consolidating etc. complete.(iteam code cu.m 286.20
04008A,S.O.R Ahemdabad City 2023-24)
Filling in foundation and plinth with brick Bats Chhara in
layers of 20cm. thickness including watering, remming and
10 1.00 consolidating etc. complete. (iteam code 04009A,S.O.R cu.m 594.61
Ahemdabad City 2023-24)
Boring holes 3.5 m deep in ordinary soil (for cast in situ
piles) and getting out the soil and disposal of the surplus
excavated soil as directed within a lead of 50 Meter for
11 1.00 following diameter of pipes.(i)200 mm.(iteam code 04010A, Each 1078.13
4.27,S.O.R Ahemdabad City 2023-24)
Boring holes 3.5 m deep in ordinary soil (for cast in situ piles)
and getting out the soil and disposal of the surplus excavated
soil as directed within a lead of 50 Meter for following
12 0.00 diameter of pipes.(ii) 250 mm.(iteam code 04010B , Each 1290.97
4.27,S.O.R Ahemdabad City 2023-24)
Boring holes 3.5 m deep in ordinary soil (for cast in situ piles)
and getting out the soil and disposal of the surplus excavated
13 0.00 soil as directed within a lead of 50 Meter for following Each 1509.00
diameter of pipes.(iii) 300 mm (iteam code 04010C
4.27,S.O.R Ahemdabad City 2023-24)
Extra for under reaming inside the bore Holes for under
reamed piles of following Diameter.(i) 200 mm(iteam code
14 1.00 04011BA, 4.28,S.O.R Ahemdabad City 2023-24) Each 430.32
Extra for under reaming inside the bore Holes for under
reamed piles of following Diameter.(ii) 250 mm(iteam code
15 1.00 04011B , 4.28,S.O.R Ahemdabad City 2023-24) Each 516.39
Extra for under reaming inside the bore Holes for under
reamed piles of following Diameter.(iii) 300 mm (iteam code
16 1.00 04011C, 4.28,S.O.R Ahemdabad City 2023-24) Each 642.30
Excavation for foundation upto 1.5 m depth including
sorting out and stacking of useful materials and disposing off
17 1.00 the excavated stuff upto 50 Meter lead.(A) Loose or soft soil. cu.m 201.81
(EXECUTED WITH MANUAL LABOUR)(iteam code 04B001A
,S.O.R Ahemdabad City 2023-24)
Excavation for foundation upto 1.5 m depth including sorting
out and stacking of useful materials and disposing off the
excavated stuff upto 50 Meter lead.(B) Dense or Hard soil.
18 1.00 (EXECUTED WITH MANUAL LABOUR)(iteam code cu.m 259.14
04B001B,S.O.R Ahemdabad City 2023-24)
Providing and laying cement concrete 1:3:6 (1- Cement : 3-
coarse sand : 6- hand broken stone aggregates
mmnominal size) and curing complete excluding cost of
19 1.00 formwork in (A) Foundation and Plinth (iteam code cu.m 2976.00
05003A,5.3.2 ,S.O.R Ahemdabad City 2023-24)
Providing and laying cement concrete 1:4:8 (1- Cement : 4-
coarse sand : 8- hand broken stone and curing complete
excluding cost of formwork in (A) Foundation and Plinth
20 1.00 (iteam code 05004A,5.3.3 ,S.O.R Ahemdabad City 2023-24) cu.m 2653.67
Providing and laying cement concrete 1:3:6 (1- Cement : 3-
Coarse sand : 6- crushed stone aggregates 20 mm nominal
21 0.00 size) and curing complete including cost of formwork in (A) cu.m 4006.15
Wall Caps / Coping (iteam code 05005A,5.3.14 ,S.O.R
Ahemdabad City 2023-24)
Providing and laying cement concrete 1:5:10 (1- Cement
: 5- Coarse sand : 10- hand broken stone aggregates
mm nominal size) and curing complete excluding
22 0.00 cost of formwork in (A)Foundation and Plinth (iteam cu.m 2492.51
code 05006A,5.3.4 ,S.O.R Ahemdabad City 2023-24)
Providing and laying cement concrete 1:2:4 (1-
Cement : 2- Coarse sand : 4- graded stone
aggregates 20 mm nominal size) and curing
23 1.00 complete excluding cost of formwork in (A) cu.m 3661.30
Foundation and Plinth (iteam code 05010A,5.3.13 ,S.O.R
Ahemdabad City 2023-24)
Providing and laying cement concrete 1:2:4 (1-
Cement : 2- Coarse sand : 4- graded stone
aggregates 20 mm nominal size) and curing
complete excluding cost of formwork in
24 1.00 (B)Independent piers, columns, and pillars, upto floor cu.m 3661.30
two level (iteam code 05010BA,5.3.13 ,S.O.R Ahemdabad
Providing and laying cement concrete work 1:2:4 (1- Cement
: 2- Coarse sand : 4- graded stone aggregates 20 mm nominal
size) and curing complete excluding cost of formwork and
reinforcement for reinforced concrete work in (A)
Foundations, footings, Base or columns and Mass concrete
(iteam code 05011AA,5.4.1 ,S.O.R Ahemdabad City 2023-24)
Providing and laying cement concrete work 1:2:4 (1- Cement
: 2- Coarse sand : 4- graded stone aggregates 20 mm nominal
size) and curing complete excluding cost of formwork and
26 1.00 reinforcement for reinforced concrete work in (B) Slabs, cu.m 4012.47
landing, shelves, Balconis , Lintels, Beams, Girders and
Cantilever upto floor two level. (iteam code 05011BA,5.4.1
,S.O.R Ahemdabad City 2023-24)
Providing and laying cement concrete work 1:2:4 (1- Cement
: 2- Coarse sand : 4- graded stone aggregates 20 mm nominal
size) and curing complete excluding cost of formwork and
27 1.00 reinforcement for reinforced concrete work in (D) Columns, cu.m 4012.47
Pillars posts and struts upto floor two level. (iteam code
05011DA,5.4.1 ,S.O.R Ahemdabad City 2023-24)
Providing TMT Bar FE 415 reinforcement for R.C.C. work
including bending, binding and placing in position
28 30.00 complete upto floor two level (iteam code 05014BA,5.4.11 kg 66.59
,S.O.R Ahemdabad City 2023-24)
Providing TMT Bar FE 500D reinforcement for R.C.C. work
including bending, binding and placing in position complete
29 12.00 upto floor two level (iteam code 05014C,5.4.11 ,S.O.R kg 75.46
Ahemdabad City 2023-24)
Providing and laying controlled cement concrete M.200
and curing complete excluding the cost of formwork
and reinforcement for reinforced concrete work in (A)
30 2.00 Foundations, footings, Base of columns and Mass cu.m 3977.88
concrete (iteam code 05024AA,5.8.2 ,S.O.R Ahemdabad City
Providing and laying controlled cement concrete M.200
and curing complete excluding the cost of formwork
31 2.00 and reinforcement for reinforced concrete work in (B) cu.m 4484.17
Walls, from top of foundation level upto floor two level
(iteam code 05024BA,5.8.2 ,S.O.R Ahemdabad City 2023-24)
Providing and laying controlled cement concrete M.200
and curing complete excluding the cost of formwork
and reinforcement for reinforced concrete work in
32 2.00 (C) Slabs ,landing, shelves,Balconies Lintels, Beams, cu.m 4460.36
Girders and Cantilever upto floor two level. (iteam code
05024CA,5.8.2 ,S.O.R Ahemdabad City 2023-24)
Providing and laying controlled cement concrete M.200
and curing complete excluding the cost of formwork
33 1.00 and reinforcement for reinforced concrete work in cu.m 4558.20
(D) Columns, Pillars posts and struts upto floor two level.
(iteam code 05024DA,5.8.2 ,S.O.R Ahemdabad City 2023-24)
Providing and laying controlled cement concrete M.200
and curing complete excluding the cost of formwork
34 1.00 and reinforcement for reinforced concrete work in cu.m 5418.91
(E) Staircases excluding landing upto floor two level (iteam
code 05024EA,5.8.2 ,S.O.R Ahemdabad City 2023-24)
Providing and laying controlled cement concrete
M.200 and curing complete excluding the cost of
formwork and reinforcement for reinforced
35 1.00 concrete work in (K) Vertical and Horizontial its upto cu.m 4701.97
floor two level. (iteam code 05024KA,5.8.2 ,S.O.R
Ahemdabad City 2023-24)
Brick work using common burnt clay building bricks having
crushing strength not less than 35 kg./Sq.Cm. in
36 16.00 foundation and plinth in Cement Mortar 1:5. (1- Cement cu.m 4345.02
: 5 -fine sand)(A) Modular (iteam code 06001AA,6.12 ,S.O.R
Ahemdabad City 2023-24)
Extra for brick work in super structure above plinth level
upto floor two level (A) Modular (iteam code
37 16.00 06006A,6.19,S.O.R Ahemdabad City 2023-24) cu.m 262.35
Extra for brick work in super structure above floor two level
Item No. 1(6.12) (A) Modular (iteam code Floor
38 16.00 06007A1A,6.2,S.O.R Ahemdabad City 2023-24) per 42.66
(i) Half brick masonry in common brunt clay building bricks
having crushing strengthnot less than 35 Kg/Sq.Cm. in
Cement mortar 1:4 (1 Cement:4-coarsesand) in
39 10.00 foundationandplinth Sq.m 584.68
(A) Modular (iteam code 06008A1A,6.3,S.O.R Ahemdabad
Extra for half brick masonry in super structure above plinth
level upto floor two level. (A) Modular(iteam code
40 10.00 06010A,6.32,S.O.R Ahemdabad City 2023-24) Sq.m 47.85
Half brick thick honey- comb brick work with
common burnt clay building bricks having crushing
strength not less than 35 Kg/Sq.Cm. (ii) In Cement
41 10.00 Mortar 1:5 ( 1- Cement : 5 - coarse sand)(iteam code Sqm 298.38
0612BA,6.55,S.O.R Ahemdabad City 2023-24)
Providing formwork of ordinary timber planking so as to
give a rough finish including centering shuttering
strutting and propping etc. Height of propping and
centering below supporting floor to ceiling not
42 1.00 exceeding 4 M. and removal of the same for in situ Sqm 171.68
reinforced concrete and plain concrete work in. (A)
Foundations Footings Bases of Columns etc. and Mass
concrete.(iteam code 09001AA,9.1,S.O.R Ahemdabad City
Providing formwork of ordinary timber planking so as to
give a rough finish including centering shuttering
strutting and propping etc. Height of propping and
centering below supporting floor to ceiling not
exceeding 4 M. and removal of the same for in situ
reinforced concrete and plain concrete work in. (B) Flat
surfaces such as soffits of supspened floors slabs Landings
and the like. (1) Floors etc. upto 200 mm in
thickness.(iteam code09001B1A,9.1,S.O.R Ahemdabad City
Providing formwork of ordinary timber planking so as to
give a rough finish including centering shuttering
strutting and propping etc. Height of propping and
centering below supporting floor to ceiling not
exceeding 4 M. and removal of the same for in situ
44 1.00 reinforced concrete and plain concrete work in. (B) Flat Sqm 270.90
surfaces such as soffits of suspended floor roof slabs
Landings and the like. (2) Floors etc. above 200mm in
thickness.(iteam code 09001B2A,9.1,S.O.R Ahemdabad City
Providing formwork of ordinary timber planking so as to
give a rough finish including centering shuttering
strutting and propping etc. height of propping and
centering below supporting floor to ceiling not
exceeding 4 M. and removal of the same for in situ
reinforced concrete and plain concrete work in. (C)
Vertical surface such as walls (any thickness) partitions
and the like including attached buttresses & string course
& the like.(iteam code 09001CA,9.1,S.O.R Ahemdabad City
Providing formwork of ordinary timber planking so as to
give a rough finish including centering shuttering
strutting and propping etc. height of propping and
centering below supporting floor to ceiling not
exceeding 4 M. and removal of the same for in situ
reinforced concrete and plain concrete work in. (G)
Columns PillarsPosts and struts. (1) Square Rectangular
Polygonal in plan.(iteam code 09001G1A,9.1,S.O.R
Ahemdabad City 2023-24)
Providing formwork of ordinary timber planking so as to
give a rough finish including centering shuttering
strutting and propping etc. height of propping and
centering below supporting floor to ceiling not
47 1.00 exceeding 4 M. and removal of the same for in situ Sqm 422.10
reinforced concrete and plain concrete work in. (G)
Columns PillarsPosts and struts. (2)Circular or curved in
Plan.(iteam code 09001G2A,9.1,S.O.R Ahemdabad City 2023-
Providing formwork of ordinary timber planking so as to
give a rough finish including centering shuttering
strutting and propping etc. height of propping and
centering below supporting floor to ceiling not
exceeding 4 M. and removal of the same for in situ
48 1.00 reinforced concrete and plain concrete work in. (H) (1) Sqm 192.15
Sides and soffits of Beams Beam Haunchings cantilevers
Girders Bressumers and Lintels not exceeding 1 M. in
Depth.(iteam code 09001H1A,9.1,S.O.R Ahemdabad City
Providing formwork of ordinary timber planking so as to
give a rough finish including centering shuttering
strutting and propping etc. height of propping and
centering below supporting floor to ceiling not
exceeding 4 M. and removal of the same for in situ
49 1.00 reinforced concrete and plain concrete work in. (H) (2) Sqm 259.88
Sides and soffits of Beams Beam Haunchings canti-levers
Girders Bressumers and Lintels exceeding 1M.in
Depth.(iteam code 09001H2A,9.1,S.O.R Ahemdabad City
Providing formwork of ordinary timber planking so as to
give a rough finish including centering shuttering
strutting and propping etc. height of propping and
centering below supporting floor to ceiling not
50 1.00 exceeding 4 M. and removal of the same for in situ Sqm 67.73
reinforced concrete and plain concrete work in. (I) Edges
of slabs and Breaks in floors and walls.(iteam code
09001IA,9.1,S.O.R Ahemdabad City 2023-24)
Providing formwork of ordinary timber planking so as to
give a rough finish including centering shuttering
strutting and propping etc. height of propping and
centering below supporting floor to ceiling not
exceeding 4 M. and removal of the same for in situ
51 1.00 reinforced concrete and plain concrete work in. (K) Sqm 604.80
Small surfaceassuch as cantiever brackets and ends of
steps caps and basses to pilasters and Columns and the
like.(iteam code 09001KA,9.1,S.O.R Ahemdabad City 2023-
Providing formwork of ordinary timber planking so as to
give a rough finish including centering shuttering
strutting and propping etc. height of propping and
centering below supporting floor to ceiling not
exceeding 4 M. and removal of the same for in situ
52 1.00 reinforced concrete and plain concrete work in. (L) Sqm 155.78
Chullah Hoods, weather shades Chhajjas Corbels etc.
including edges.(iteam code 09001LA,9.1,S.O.R Ahemdabad
Providing formwork of ordinary timber planking so as to
give a rough finish including centering shuttering
strutting and propping etc. height of propping and
centering below supporting floor to ceiling not
53 1.00 exceeding 4 M. and removal of the same for in situ Sqm 242.55
reinforced concrete and plain concrete work in. (M)
Staircase with sloping or stepped soffits including
risers and stringers excluding landing.(iteam code
09001MA,9.1,S.O.R Ahemdabad City 2023-24)
Providing formwork of ordinary timber planking so as to
give a rough finish including centering shuttering
strutting and propping etc. height of propping and
centering below supporting floor to ceiling not
54 1.00 exceeding 4 M. and removal of the same for in situ Sqm 382.73
reinforced concrete and plain concrete work in. (Q)
Vertical fins and vertical sun breakers.(iteam code
09001QA,9.1,S.O.R Ahemdabad City 2023-24)
Extra for additional height of propping and
centering where the height of propping and
centering exceeds 4 .O M between supporting floor to ceiling
55 1.00 including temporary brick or stone pillars for supporting as Sqm 386.48
required. (i)Height more than 4.0 M.and upto 5.0 M.(iteam
code 09002AA,9.1,S.O.R Ahemdabad City 2023-24)
Providing and fixing 35 mm thick shutters for Doors,
windows and clear story windows including anodised
56 1.00 alluminium butt hinges with necessary screws. (A) Indian Sqm 3211.96
Teak Wood (ii) Fully Glazed.(iteam code
10004BA,10.12,S.O.R Ahemdabad City 2023-24)
Providing and fixing in position collapsible steel
shutters with vertical channels 20 x 10 x 2 mm braced
with flat iron diagonals 20 x 5 mm size with top and bottom
rails of T_rin 40x 40 x 6 mm with 38mm dia, steel
57 1.00 pulleys complete with bolts, nuts, locking arrangements, Smt. 5391.23
stoppers handles including applying a priming coat of red
lead paint.(iteam code 11003A,11.6,S.O.R Ahemdabad City
Providing and laying 40mm thick marble chips flooring
rubbed and polished (I.E. terrazo) to granolithic finish
with under layer 30mm thick cement concrete 1:2:4 (1-
Cement:2-coarse sand :4- graded stone aggregate 10 mm
and down gauge) and top layer 10mm thick with white,
black or white and blak marble cihps of required sizes
from 1mm to 4mm nominal size laid in cement marble
powder mix 3:1 (3-Cement : 1-Marble powder by weight) in
proportion of 4:7 (4-Cement :7-marble chips by
volume) (A) Dark shade pigment with ordinary
cement (In top layer only)(iteam code 14001AA,14.2,S.O.R
Ahemdabad City 2023-24)
Providing and laying Vitrified tiles 8 to 10 mm thick
, 36'' x 36'' in flooring treads of steps and landing laid
on a bed of 12mm thick cement mortar 1:3 (1- cement : 3-
59 1.00 coarse sand ) finishing with flush pointing in white Sqm 1469.91
cement.(iteam code 14008DA,14.29,S.O.R Ahemdabad City
P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm
(average) base of cement mortar 1:6 ( 1 cement:
coarse sand) on new surface or fixing on existing flooring
by adhesive material including dismentaling of existing
60 40.00 flooring and jointed with color cement slurry including Sqm 1178.10
finised with flush pointing & cleaning the surface etc.
complete for light shade(iteam code 14022A,S.O.R
Ahemdabad City 2023-24)
Providing and laying white glazed tiles 6mm thick in flooring
treads of steps and landing laid on a bed of 12mm thick
61 20.00 cement mortar 1:3 (1-cement : 3- coarse sand ) Sqm 908.17
finishing with flush pointing in white cement.(iteam code
14008AA,14.29,S.O.R Ahemdabad City 2023-24)
Providing and laying white glazed tiles 6mm thick in skrting
risers of steps and dedo on 10mm thick cement plaster
62 15.00 1:3 (1-cement : 3-coarse sand) and jointed with white Sqm 1044.23
cement slurry(iteam code 14009AA,14.32,S.O.R Ahemdabad
Providing and laying coloured glazed tiles of the size 300 mm
x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting,
63 15.00 risers of steps and dedo on 10 mm. thick cement plaster 1:3 Sqm 1426.95
(1 cement : 3 coarse sand) & jointed with white cement
slurry.(iteam code 14036,S.O.R Ahemdabad City 2023-24)
Providing and laying marble stone slab flooring over 20mm
(average)base of cement mortar 1:6 (1- cement :
coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand)
64 1.00 laid and jointed with gray cement slurry including rubbing Sqm 2194.63
and polishing complete. (A) Marble slab 25mm thick(iteam
code 14011A,14.36,S.O.R Ahemdabad City 2023-24)
Providing and laying polished Kota stone slab flooring
over 20mm (Average) thick base of cement mortar 1:6 (1-
cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -
coarse sand) laid over and jointed with grey cement
65 10.00 slurry mixed with pigment to match the shade of slab Sqm 982.83
including rubbing and polishing etc. complete. (A) 25mm
thick (iteam code 14012AA,14.43,S.O.R Ahemdabad City
Providing corrugated G.I. sheet of class-3 roofing fixed
with glavanished iron J or L Hooks, Bolts and nuts 8mm
diameter with bitumen and G.I. limpet washer or G.I.
66 1.00 limpet washer. filled with white lead complete excluding the Sqm 719.93
cost of purlins, Rafters and Trusses.(1) 0.80 mm thick
sheet.(iteam code 15001A,15.1,S.O.R Ahemdabad City 2023-
Providing valleys 900mm overall in plain 1.6mm thick G.I.
sheet fixed with G.I. J or L Hooks, Bolts and nuts glavanised
67 1.00 iron J or L Hooks Bolts and nuts 8mm dia G.I. Limpet Sqm 1042.78
and bitumen washers complete.(iteam code
15003A,15.8,S.O.R Ahemdabad City 2023-24)
Providing 15mm thick cement plaster in single coat on
Rough (Similar)side of single or half brick walls for
interior plastering upto floor two level and finished
68 20.00 even and smooth in (iii) Cement mortar 1:6 (1-cement:6- Sqm 137.34
sand)(iteam code17002C,17.6,S.O.R Ahemdabad City 2023-
Providing 20mm thick cement plaster in single coat on single
or half brick walls for interior plastering upto floor two
69 30.00 level and finished even and smooth in (iii) Cement mortar Sqm 165.38
1:6 (1-cement:6-sand)(iteam code 17003C,17.61,S.O.R
Ahemdabad City 2023-24)
White washing with lime on wall surface (two coats) to give
an even shade including thoroughly booming the
70 10.00 surface to remove all dirt, dust; mortar drops and other Sqm 12.29
foreign matter.(iteam code18001,18.11,S.O.R Ahemdabad
Removing dry or oil bound distemper by a washing and
scraping and sand papering the wall surface smooth
including necessary repairs to scratches
71 1000.00 complete.(iteam code18014,18.33,S.O.R Ahemdabad City Sqm 11.19
Distempering with dry distemper of approved brand
and manufacture (two coats) and of required shade on wall
surfaces of given an even shade, over and including a
72 1000.00 priming coat of whiting after thoroughly brooming the Sqm 46.94
surface free from mortar dropping and other foreign
matter.(iteam code 18016,18.38,S.O.R Ahemdabad City
Finishing wall with water proofing cement paint of on wall
surfaces (Two coats) to give an approved brand and
manufacture and of required shape even shade after
73 10.00 thoroughly brushing the surface to remove all dirt and Sqm 56.87
remains of loose powered materials.(iteam code
18027,18.51,S.O.R Ahemdabad City 2023-24)
Extra over Item 73 for every subsequent coat of water
proofing cement paint of approved brand and
74 10.00 manufacture.(iteam code 18028,18.53,S.O.R Ahemdabad Sqm 31.82
Extra over item 73 for finishing with cement paint on
ceiling and sloping roofs.(iteam code18029,18.54,S.O.R
75 10.00 Ahemdabad City 2023-24) Sqm 6.47
Wall painting (two coats) with plastic emulsion paint
of approved brand and manufacture on undecorated
wall surface to give an even shade including throughly
brushing the surface free from mortar droppings and
76 200.00 other foreign matter and sand papered smooth.(iteam Sqm 78.44
code 18031,18.57,S.O.R Ahemdabad City 2023-24)
Extra over item 76 for every subsequent coat of wall
painting with plastic emulsion pain of approved brand.(iteam
code 18032,18.59,S.O.R Ahemdabad City 2023-24)
Extra over item 76 for painting with plastic
emulsion paint of approved brand on ceilings
78 200.00 andmsloping roofs.(iteam code 18033,18.6,S.O.R Sqm 5.36
Ahemdabad City 2023-24)
Painting two coats (excluding priming coat) on new steel
and other metal surface with enamel paint, brushing,
interior to give an even shade including cleaning the
79 10.00 surface an even shade including cleanicn the surface Sqm 86.94
of all dirt, dust and other foreign matter.(iteam code
19002,19.7,S.O.R Ahemdabad City 2023-24)
Painting one coats (excluding priming coat) on
previously painted steel and other metal surface with
enamel paint, brushing to give an even shade including
80 10.00 cleaning the surface of all dirt, dust and other foreign Sqm 54.35
matter.(iteam code 19003,19.11,S.O.R Ahemdabad City
Painting two coats (excluding priming coat) on new wood
and wood based surface with ready mixed paint,
brushing, oil, gloss, semi gloss to give and even shade
including cleaning of all dust, dirt and other foreign matter
81 10.00 sand papering and stopping.(iteam code 19014,19.77,S.O.R Sqm 104.12
Ahemdabad City 2023-24)
Varnishing two coats (excluding priming coat) on new
wood and wood based surface under coating with flatting
varnish and finished coat with varnish to give an even
82 10.00 surface including cleaning the surface of all dirt, dust and Sqm 54.18
sand papering so as to produce a smooth dry surface.(iteam
code 19015,19.84,S.O.R Ahemdabad City 2023-24)
Extra over Above item 82 for every subsequent coat of
83 10.00 varnish.(iteam code 19016,19.86,S.O.R Ahemdabad City Sqm 30.68
Applying two coats of putty & two coats of primer of
approved brand and manufacture on new wall surface to
give an even shade including thoroughly brushing the
surface free from mortar dropping and other foreign matter
and sand papered smooth.(iteam code 19032,S.O.R
Ahemdabad City 2023-24)
Demolition and disposal of unserviceable materials with all
lead and lift.(i) Lime concrete.(iteam code
85 5.00 20001B,20.1,S.O.R Ahemdabad City 2023-24) cu.m 603.23
Demolition including stacking of serviceable
materilas and disposal of unserviceable materials with all
86 5.00 lead and lift. (i) R.C.C. work(iteam code 20002,20.3,S.O.R cu.m 1047.38
Ahemdabad City 2023-24)
Demolition of Brick work and stone masonry including
stacking of serviceable materilas and disposal of
unserviceable materials with all lead and lift. (i) In Lime
87 6.00 Mortar.(iteam code 20003A,20.11,S.O.R Ahemdabad City cu.m 362.25
Demolition of Brick work and stone masonry including
stacking of serviceable materilas and disposal of
unserviceable materials with all lead and lift.(ii) In Cement
88 5.00 Mortar.(iteam code 20003B,20.11,S.O.R Ahemdabad City cu.m 544.95
Dismentaling tiled of stone floors laid in mortar
including stacking of serviceable materilas and disposal
89 25.00 of unserviceable materials with all lead and lift.(iteam code Sqm 47.25
20005,20.23,S.O.R Ahemdabad City 2023-24)
Dismentaling of wooden floors including stacking of
serviceable materilas and disposal of unserviceable materials
90 1.00 with all lead and lift.(iteam code 20006,20.25,S.O.R Sqm 70.88
Ahemdabad City 2023-24)
Dismentaling of sheet roofing including ridges, Hips,
Valleys, Gutters etc. stacking of serviceable materilas and
disposal of unserviceable materials with all lead and lift.(i)
91 1.00 G.I.sheet roofing.(iteam code 20007A,20.27,S.O.R Sqm 47.25
Ahemdabad City 2023-24)
Dismentaling of sheet roofing including ridges, Hips,
Valleys, Gutters etc. stacking of serviceable materilas and
disposal of unserviceable materials with all lead and lift.(ii)
92 1.00 A.C. sheet roofing.(iteam code 20007B,20.27,S.O.R Sqm 53.55
Ahemdabad City 2023-24)
Dismentling doors, windows, ventilators etc. (wood or steel)
shutters including chowkhats architraves, holdfasts and
other attachment etc. complete and stacking them
93 20.00 within all lead and lift.(i) Not exceeding 3 Sq.M. in Each 185.85
area.(iteam code 20013A,20.49,S.O.R Ahemdabad City 2023-
Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water
pipes with fittings and clamps including stacking the
materials with all lead and lift ( for any dia, of pipe)(iteam
94 1.00 code 20015,20.56,S.O.R Ahemdabad City 2023-24) Rmt 74.03
Dismantling santtary fittings like wash basin . W.C. pan
Indian and European type, flushing tank etc. including
95 25.00 stacking the materials with all lead and lift.(iteam code Each 401.63
20016,S.O.R Ahemdabad City 2023-24)
Dismentling barbed wire in fencing including making
rolls and also including dismentling fencing posts including
all earth work concrete in base and making good the
disturbed ground stacking useful materials as directed and
96 1.00 disposing as directed and disposing of the unserviceable Rmt 66.15
materials with all lead and lift.(iteam code
20014,20.51,S.O.R Ahemdabad City 2023-24)
Providing and fixing 1.20 Metre high fencing with
Metre long M.S. Angle posts 40mm x 40 mm x6 mm and oil
painting 3 coats fixed at 2.5 Mt,C/c. with five Horizontan
lines and two diagonals of galvanised steel barbed wire
weighting 9.38 Kg. per 100 Metre, strained and fixed to
97 1.00 posts with G.I,staples including fixing the postsin ground Rmt 385.40
with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc
complete.(iteam code 22001,22.2,S.O.R Ahemdabad City
Providing and fixing to wall, ceiling and floor
galvanised Mild steel tubes (Medium grade) of the
following nominal bore, tube fitting and clamps
98 1.00 including making good the wall ceiling and floor.(A) Rmt 244.13
15mm(iteam code 23001AA,23.2,S.O.R Ahemdabad City
Providing and fixing to wall, ceiling and floor
galvanised Mild steel tubes (Medium grade) of the
following nominal bore, tube fitting and clamps
99 1.00 including making good the wall ceiling and floor.(B) Rmt 297.25
20mm(iteam code 23001BA,23.2,S.O.R Ahemdabad City
Providing and fixing to wall, ceiling and floor
galvanised Mild steel tubes (Medium grade) of the
following nominal bore, tube fitting and clamps
100 1.00 including making good the wall ceiling and floor.(C) Rmt 393.93
25mm(iteam code 23001CA,23.2,S.O.R Ahemdabad City
Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2
working pressure poluthene pipes of the following
outside Dia. Low densidy, complete with special falnge
compression type fittings, wall clipsetc. including
101 5.00 making good the wall ceiling and floor.(A) 20mm(iteam code Rmt 78.12
23004A,23.8,S.O.R Ahemdabad City 2023-24)
Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2
working pressure poluthene pipes of the following
outside Dia. Low densidy, complete with special falnge
compression type fittings, wall clipsetc. including
102 5.00 making good the wall ceiling and floor.(B) 25mm(iteam code Rmt 100.49
23004B,23.8,S.O.R Ahemdabad City 2023-24)
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2
working pressure poluthene pipes of the following
outside Dia. Low densidy, complete with special falnge
103 5.00 compression type fittings, wall clipsetc. including Rmt 116.40
making good the wall ceiling and floor.(C) 32mm(iteam code
23004C,23.8,S.O.R Ahemdabad City 2023-24)
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2
working pressure polythene pipes of the following
outside Dia. Low densidy, complete with special falnge
104 5.00 compression type fittings, wall clipsetc. including Rmt 274.68
making good the wall ceiling and floor.(F) 75mm(iteam code
23004F,23.8,S.O.R Ahemdabad City 2023-24)
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2
working pressure poluthene pipes of the following
outside Dia. Low densidy, complete with special falnge
compression type fittings, wall clipsetc. including
105 5.00 making good the wall ceiling and floor.(G)110 mm(iteam Rmt 332.91
code 23004G,23.8,S.O.R Ahemdabad City 2023-24)
Providing and fixing cast iron spigot and socket soil,
waste and ventilating pipes of the following
nominal size.(B) 75mm dia.(iteam code 23005BA,23.79,S.O.R
106 2.00 Ahemdabad City 2023-24) Rmt 732.09
Providing and fixing cast iron spigot and socket soil, waste
and ventilating pipes of the following nominal
107 2.00 size.(C) 100mm dia.(iteam code 23005CA,23.79,S.O.R Rmt 881.64
Ahemdabad City 2023-24)
Providing and fixing in position cowel went to
108 2.00 pipes.(B) 75mm dia.(iteam code 23006B,S.O.R Ahemdabad Each 385.88
Providing and fixing in position cowel went to
109 2.00 pipes.(C) 100mm dia(iteam code 23006C,S.O.R Ahemdabad Each 496.90
Providing and fixing cast iron (Spun) Nahni trap of the
following nominal diameter of self cleaning design
with C.I. screaed down or higned grating including cost of
110 2.00 cutting and making good the walls and floor 100mm inlet Each 600.08
and 50mm outlet.(C) 100mm dia.(iteam code
23008,23.857,S.O.R Ahemdabad City 2023-24)
Providing and fixing water closet squatting Pan (Indian
type W.C. Pan) size 580mm (Earthwork, bed concrete, foot
reste and trap to be measured and paid for separately)
111 5.00 (A) Vitreous China.(I) Long pattern = White colour(iteam Each 926.10
code 23009,23.111,S.O.R Ahemdabad City 2023-24)
Providing and fixing wsh down water closet
(European type, W.C. Pan) with integral P or S trap including
jointing the trap with soil pipe in Cement Mortar 1:1 (1-
Cement : 1-fine sand) (Seal and cover to be measured and
paid for separately)(A) vitreous China Pattern :(i) in white
colour(iteam code 23010,23.112,S.O.R Ahemdabad City
Providing and fixing 100mm size P or S trap for water
closet squatting pan including jointing the trap with the
pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-
113 5.00 Fine sand)(A) Vitreous China.(iteam code 23011,23.113,S.O.R Each 311.85
Ahemdabad City 2023-24)
Providing and fixing wash basin with single hole for pillar
tap with C.I. or M.S. brackets painted white including
sutting holes and making good the same but excluding
114 2.00 fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 Each 1400.18
mm x v 400mm size. (i) In white colour.(iteam code
23018,23.127,S.O.R Ahemdabad City 2023-24)
Providing and fixing 600mm x 450mm bevelled edge mirrror
of superior glass mounted on 6mm thick A.C. sheet or
115 2.00 plywood sheet and fixing to wooden pluge with C.P. brass Each 825.48
screws and washers.(iteam code 23024,23.143,S.O.R
Ahemdabad City 2023-24)
Providing and fixing C.P. brass towel rail comlete with
C.P. brass brackets fixed to wooden plugs with C.P. brass
116 2.00 scews.(B) 600mm x 20mm size.(iteam code Each 597.22
23025,23.144,S.O.R Ahemdabad City 2023-24)
Providing and fixing screw down bib taps of following
size.(A) Brass screw down bib tap polished bright. (i) 15mm
117 2.00 dia.(iteam code 23028A1,23.92,S.O.R Ahemdabad City 2023- Each 184.98
Providing and fixing screw down bib taps of following
size.(B) Brass chromium plated screws down Bib Tap. (i)
118 2.00 15mm dia.(iteam code 23028B1,23.92,S.O.R Ahemdabad City Each 184.98
Providing and fixing brass screw down stop tap.(A)
15mm dia.(iteam code 23030A,23.96,S.O.R Ahemdabad City
Providing and fixing Gun metal check or non-return
fullway wheel valve.(A) 15mm dia.(iteam code
120 2.00 23028A1,23.92,S.O.R Ahemdabad City 2023-24) Each 184.98
Providing and fixing Gun metal check or non-return
121 1.00 fullway wheel valve.(B) 20mm dia.(iteam code Each 201.80
23031B,23.99,S.O.R Ahemdabad City 2023-24)
Providing and fixing chromium plated brass half trun
flush cock of approved quality including fixing in pipe line
122 1.00 etc. complete.(i) 20mm dia.(iteam code 23032A,S.O.R Each 252.26
Ahemdabad City 2023-24)
Providing and fixing chromium plated brass half trun
flush cock of approved quality including fixing in pipe line
123 1.00 etc. complete.(ii) 25mm dia.(iteam code 23032B,S.O.R Each 261.16
Ahemdabad City 2023-24)
Providing and fixing Urinal or approved quality
including conecting the Urinal with waste pipe , tap etc.
complete.(A) White earthenware flat back or corner type
124 10.00 size 430mm x 260mm x 350mm.(iteam code Each 1026.01
23033,23.122,S.O.R Ahemdabad City 2023-24)
Providing and fixing Urinal of approved quality
including connection with trap and with integral
longitudinal flush pipe.(A) Squating plate pattern white
125 10.00 earthenware 550mm x 300mm.(iteam code Each 1535.63
23034,23.124,S.O.R Ahemdabad City 2023-24)
Providing and fixing ball cock of approved. quality as
directed.(A) Copper Metal (i) 25mm dia.(iteam code
126 1.00 23037A1,S.O.R Ahemdabad City 2023-24) Each 131.57
Providing and fixing ball cock of approved. quality as
directed.(A) Copper Metal (ii) 50mm dia.(iteam code
127 1.00 23037A2,S.O.R Ahemdabad City 2023-24) Each 187.96
Providing and fixing ball cock of approved. quality
as directed.(B) Abonite (i) 25mm dia.(iteam code
128 1.00 23037B1,S.O.R Ahemdabad City 2023-24) Each 101.89
Providing and fixing ball cock of approved. quality
as directed.(B) Abonite (ii) 50mm dia.(iteam code
129 1.00 23037B2,S.O.R Ahemdabad City 2023-24) Each 136.52
Providing and fixing plastic seat and cover for wash down
water closer with C.P. brass hinges and rubber
130 10.00 buffers. (B) Black plastic seal and cover.(iteam code Each 288.45
23017,23.121,S.O.R Ahemdabad City 2023-24)
Providing and fixing Rubber plug for sink or wash
131 1.00 basin.(iteam code 23035 ,23.134,S.O.R Ahemdabad City Each 16.98
Providing and fixing concealed center point to wall ceiling
& floor CPVC (SDR 13.5) PIPE having National Sanitation
Foundation (NSF) seal for potable water of following dia.
nominal bore tube fittings and clamps including making
132 24.00 good the wall, ceiling and floor etc. complete.[A] 15 Rmt 165.21
mm.(iteam code 23055 ,S.O.R Ahemdabad City 2023-24)
Providing and fixing concealed center point to wall ceiling
& floor CPVC (SDR 13.5) PIPE having National Sanitation
Foundation (NSF) seal for potable water of following dia.
nominal bore tube fittings and clamps including making
133 1.00 good the wall, ceiling and floor etc. complete. [B] 20 Rmt 202.97
mm.(iteam code 23056 ,S.O.R Ahemdabad City 2023-24)
Providing and fixing concealed center point to wall ceiling
& floor CPVC (SDR 13.5) PIPE having National Sanitation
Foundation (NSF) seal for potable water of following dia.
nominal bore tube fittings and clamps including making
134 24.00 good the wall, ceiling and floor etc. complete. [C] 25 Rmt 247.25
mm.(iteam code 23057,S.O.R Ahemdabad City 2023-24)
Providing and fixing concealed center point to wall Ceiling &
floor CPVC (SDR13.5) PIPE having National Sanitation
Foundation(NSF) seal for potable water of following dia.
nominal bore tube fittings and clamps including making good
135 1.00 the wall, ceiling and floor etc. complete. [D] 32mm.(iteam Rmt 330.36
code 23058,S.O.R Ahemdabad City 2023-24)
Providing and fixing concealed center point to wall ceiling &
floor CPVC (SDR13.5) PIPE having National Sanitation
Foundation(NSF)seal for potable water of following dia.
nominal bore tube fittings and clamps including making good
136 1.00 the wall, ceiling and floor etc. complete. [E] 40mm(iteam Rmt 437.66
code 23059,S.O.R Ahemdabad City 2023-24)
Providing and fixing concealed center point to wall ceiling &
floor CPVC(SDR13.5) PIPE having National Sanitation
Foundation (NSF)seal for potable water of following dia.
nominal bore tube fittings and clamps including making good
137 1.00 the wall, ceiling and floor etc. complete. [F] 50mm(iteam Rmt 647.30
code 23060,S.O.R Ahemdabad City 2023-24)
Providing laying and jointing in true line and level 15mm
dia. U.P.V.C. Pipe ( SCH- 40) for cold water including
fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall with the help of clamp at every two
metre C/C or shall be concealed as directed including
necessary fittings etc. including testing of pipe and joints
138 1.00 and fixing the same with adhesive solvent, including cost of Rmt 71.93
all materials.(iteam code 23061,S.O.R Ahemdabad City 2023-
Providing laying and jointing in true line and level 25mm
dia. U.P.V.C. Pipe ( SCH- 40) for cold water including
fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall with the help of clamp at every two
139 24.00 metre C/C or shall be concealed as directed including Rmt 90.93
necessary fittings etc. including testing of pipe and joints
and fixing the same with adhesive solvent, including cost of
all materials.(iteam code 23062,S.O.R Ahemdabad City 2023-
Providing laying and jointing in true line and level 32mm
dia. U.P.V.C. Pipe ( SCH- 40) for cold water including
fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall with the help of clamp at every two
140 12.00 metre C/C or shall be concealed as directed including Rmt 117.97
necessary fittings etc. including testing of pipe and joints
and fixing the same with adhesive solvent, including cost of
all materials.(iteam code 23063,S.O.R Ahemdabad City 2023-
Providing laying and jointing in true line and level 40 mm
dia. U.P.V.C. Pipe(SCH-40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre C/C or shall
be concealed as directed including necessary fittings etc.
141 24.00 including testing of pipe and joints and fixing the same with Rmt 146.65
adhesive solvent, including cost of all materials.(iteam code
23064,S.O.R Ahemdabad City 2023-24)
Providing layingand jointing in true line and level 50 mm dia.
U.P.V.C. Pipe(SCH-40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre C/C or shall
be concealed as directed including necessary fittings etc.
142 10.00 including testing of pipe and joints and fixing the same with Rmt 193.73
adhesive solvent, including cost of all materials.(iteam code
23065,S.O.R Ahemdabad City 2023-24)
Providing and fixing S.W. gully trap with C.I. grating brick
masonry chamber and water tight C.I. cover with frame
of 300mm x 300mm size (inside) with standard
weight.(i) Square mouth traps. (A) 100mm x 100mm
143 10.00 size P type.(iteam code 24006AA,24.19,S.O.R Ahemdabad Each 1279.40
Providing cement vata (10cm. x 10 cm. size) quarter round in
cement mortar 1:1 including neat cement finishing, watering
144 100.00 etc. complete.(iteam code 17015,S.O.R Ahemdabad City Rmt 23.45
Providing and fixing 30mm thick factory made
moulded door shutter wood free consisting of frame
made out of M.S. tubes of 19 gauge thickness and size of
25mm x 25mm for stiles, top and bottom rails, M.S.
frame shall have a coat of steel primers. The inner panel
shall consist of 25mm thick High Density EPS conforming
to IS 4671-1984 bonded with 2mm thick termite proof,
water proof and fire resistant moulded PVC sheet with
2,4,6 raised panel design in different plain and /or prelim
colours after routing the moulded design on one side
and 2mm plain and/or prelim PVC sheet on other side
of the EPS. The edges of panel to be sealed with lipping
of 10mm wide PVC sheet batton (made by sticking 2 PVC
rigid foam sheets of 5mm thickness using PVC solvent
cement) and stiles 25mm (5mm x 5) thick and 30mm width
PVC sheet fitted along M.S. tube for lock provision and for
lock height 5mm thick PVC sheet of size 150mm x
100mm fixed with upper and lower face of inner side of
EPS panel etc. complete as per direction of Engineer in
charge manufacture’s specification and drawing.(iteam code
10049,S.O.R Ahemdabad City 2023-24)
Providing and fixing factory made polyvinyl chioride (PVC)
door frame of the size 50 x 47 mm with a wall thickness of
5mm, made out of extruded 5mm rigid PVC foam sheet,
mitre out of two corners and joined with 2nos. of
150mm long brackets of 15 x 15mm M.s. Square tubes.
The two vertical door profiles are to be reinforced with
x 19 mm m.s. square tube of 19 gauge, EPDM rubber
gasket weather seal to be provided through out the frame.
The door frame shal be fixed to the wall using 65/100
mm long M.S. screws through the frame by using PVC
fasteners. A miniumum of 4 nos. os screws to be
146 1.00 provided for each vertical members and minium 2 nos. sqm 314.88
for horizontal members etc. complete as per
manufactures specification and direction of Engineer in
charge.(iteam code 10050,S.O.R Ahemdabad City 2023-24)
Providing and fixing M.S. grills of required pattern to
wooden frames of windows etc. with M.S. flats at required
spacings and frame alround, square or round bars with
147 80.00 round headed bolts and nuts or by screws (A) Plain kg 100.17
Grill.(iteam code 10025AA,10.1,S.O.R Ahemdabad City 2023-
Providing and fixing M.S. grills of required pattern to
wooden frames of windows etc. with M.S. flats at required
spacings and frame alround, square or round bars with
round headed bolts and nuts or by screws. (B)
148 32.00 ORNAMENTAL GRILL(iteam code 10025BA,10.1,S.O.R kg 143.64
Ahemdabad City 2023-24)
Carring out plinth treatment to post construction / existing
structure by spraying chemical solution for termite control
treatment including labour and material consistment
with I.S.I specification. Using Chlordene and
Chiorpurfiles 20 EC. As Per 6131_paret-II
Consentration Weight one percent is recommended i.e one
litre 20 EC chemical emulsion with 19 liter give 1 %
149 50.00 concrentration inclusive of one litre chemical emulsion Smt 104.90
appication at the rate of 5 Litre chemical / Sqm
of surface is recommended as per I.S(iteam code
22007,S.O.R Ahemdabad City 2023-24)
Carrying out timber treatment to all wood work
including drilling holes and spraying oil based
chemical solution on surface of timber work for termite
control including labor and material etc. complete. Using
Chlorpyriphos20 EC as per 6313 2013 Part III (1%
concentration by mass) is recommended one litre
chemical emulsion diluted with 19 liters of
kerosene. Total diluted concentration will be 20 liters
inclusive of 1 liter chemical emulsion application in
drilled holes and 0.75 / Litre chemical per one Sqmt two
coat on wood surface not protected by paint or
varnish.(iteam code 22005,S.O.R Ahemdabad City 2023-24)
Providing and fixing Gun metal check or non-return fullway
wheel valve.(B) 20mm dia.(iteam code 23031B,23.99,S.O.R
151 1.00 Ahemdabad City 2023-24) Each 201.80
Providing and fixing Gun metal check or non-return fullway
wheel valve.(C) 25mm dia.(iteam code 23031C,23.99,S.O.R
152 1.00 Ahemdabad City 2023-24) Each 416.47
Providing and fixing Gun metal check or non-return fullway
wheel valve.(D) 32mm dia.(iteam code 23031D,23.99,S.O.R
153 1.00 Ahemdabad City 2023-24) Each 311.61
Providing and fixing Gun metal check or non-return fullway
wheel valve.(E) 40mm dia.(iteam code 23031E,23.99,S.O.R
154 1.00 Ahemdabad City 2023-24) Each 656.86
Supplying nece hardware, G.I.Fittings etc.comp of app.
Quality as under
a 1.00 S.S. Stopper 30 Cm long of ASIS 304 No. 180.51
b 1.00 S.S. Stopper 20 Cm long of ASIS 304 No. 126.27
c 1.00 S.S. Aldrop 20 Cm long of ASIS 304 Grade No. 216.10
d 1.00 S.S. Aldrop 25 Cm long of ASIS 304 Grade No. 324.58
e 1.00 S.S. Aldrop 30 Cm long of ASIS 304 Grade No. 396.61
S.S. Handle for door/ window 10 Cm size of ASIS 304 Grade
g 1.00 Ball cock of copper 25 mm diameter Each 112.71
h 1.00 Ball cock of copper 50 mm diameter Each 161.02
i 1.00 Ball cock of abonite 25 mm diameter Each 87.29
j 1.00 Ball cock of abonite 50 mm diameter Each 116.95
k 1.00 Labour charges - Carpentar 1st Class Each 725.00
l 1.00 Labour charges - Carpentar 2nd Class Each 638.00
m 1.00 Labour charges - Plumber (Fitter) Each 697.00
n 1.00 Labour charges - Plumber(Fitter)Assist Each 570.00
Providing and fixing window having extruded
aluminum Colour anodized section frame main outer
size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt,
horizontal two track member size 61.85 mm x 31.75 mm x
1.20mm @ wt.of 0.695 Kg/mt, vertical member of size
mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding
shutters of horizontal member size 40mm x 18mm x
1.29mm @ wt.of 0.456Kg/mt, vertical member of size
Kg/mt with 5 mm thick transparent bronze colour tinted
156 8.00 float glass with powder coated aluminum fittings and Sqm 1696.73
fixtures and transparent silicon sealant glass fixing to
frame as per details etc complete for window.(iteam
code 11028,S.O.R Ahemdabad City 2023-24)
Providing and fixing standared extruded of
alluminium section of size 63.50 x 38.10 x 1.95 mm @ Wt
1.094Kg / Rmt with colour anodized alluminium
frame with 5 mm thick transparent bronze colour
tinted float glass with colour anodized alluminium
157 10.00 frame for ventilation with 5 mm thick frosted glass as Sqm 1288.93
details etc complete for.window(iteam code 11029,S.O.R
Ahemdabad City 2023-24)
Providing and fixing window having extruded
aluminum Colour anodized section frame main outer
size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m,
horizontal Four track member size 122.20mm x
31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of
size 122.20mm x 31.75mm x 1.50mm @1.398 kg/mt
with sliding shutters of horizontal member size 40mm x
158 8.00 18mm x 1.29mm@ 0.456kg/mt ,vertical member of size Sqm 2119.14
40mm x 18mm x 1.29mm @ 0.456 kg/mt with 5 mm
thick transparent bronze colour tinted float glass with
powder coated aluminum fittings and fixtures and
transparent silicon sealant glass fixing to frame as per
details etc complete for window.(iteam code 11026,S.O.R
Ahemdabad City 2023-24)
Providing and fixing standared extruded of
alluminium section of size 63.50 x 38.10 x 1.95 mm,@
Wt 1.094Kg / Rmt with colour anodized alluminium
frame with 5 mm thick transparent bronze colour
159 3.00 tinted float glass as details etc complete for Fix Sqm 1509.90
window.(iteam code 11031,S.O.R Ahemdabad City 2023-24)
Providing and fixing window having extruded
aluminum Colour Powder Coated section frame main
outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg /
Rmt, horizontal two track member size 61.85 mm x
31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical
member of size 61.85 mm x 31.75mm x 1.30 mm @
wt.of 0.0.659 Kg/mt with sliding shutters of horizontal
160 3.00 member size 40mm x 18mm x 1.29mm @ wt.of Sqm 1688.78
0.456Kg/mt, vertical member of size 40mm x 18mm x
1.29mm @ wt.of 0.456Kg/mt with 5 mm thick
transparent bronze colour tinted float glass with
powder coated aluminum fittings and fixtures and
transparent silicon sealant glass fixing to frame as per details
etc complete for window.(iteam code11034,S.O.R
Ahemdabad City 2023-24)
Providing and fixing rolling shutters of approved make
made of 80 mm wide M.S. laths inter-locked together
through their entire length and jointed together at the
ends by end locks mounted on specially designed pipe
shaft with bracket plates, guide channels and
161 3.00 arrangements for inside and outside locking with push- Sqm 2718.41
pull operation complete but excluding the cost of hood
cover and spring. (A) Shutters having width below
3.5.M.(iteam code 11006A,11.9,S.O.R Ahemdabad City 2023-
Providing and fixing 27.5 cm. long wire spring grade No.2 of
approved make for rolling shutters.(iteam code
162 5.00 11007,11.1,S.O.R Ahemdabad City 2023-24) Each 630.91
Providing and fixing Hood cover for rolling shutters (A)
Shutters having width below 3.5 meters(iteam code
163 5.00 11008A,11.11,S.O.R Ahemdabad City 2023-24) Rmt 120.03
Providing and laying Cement concrete 1:5:10 (1- Cement
: 5-Fine sand :10-Graded stone aggregate 40mm nominal
size) bedding for stoneware pipes of following internal
164 1.00 diameters with necessary formwork and curing Rmt 125.90
complete.(A) 100 mm dia. (112 mm Ave.bed
thickness)(iteam code 24002A,24.2,S.O.R Ahemdabad City
Providing and laying Cement concrete 1:5:10 (1- Cement
: 5-Fine sand :10-Graded stone aggregate 40mm nominal
size) bedding for stoneware pipes of following internal
diameters with necessary formwork and curing
complete.(B) 150mm dia. (166mm Ave. bed
thickness)(iteam code 24002B,24.20,S.O.R Ahemdabad City
Constructing brick masonry chamber for
underground C.I. Inspection chamber and bends with
bricks having crushing strength not less than 35Kg/Cm2
in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x
610mm intenal dimensions total weight of cover with
frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and
Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix
(1-cement :2- coarse sand :4-graded stone aggregate
20mm size) foundation concrete 1:5:10 inside plaster
15mm thick with cement mortar 1:3 finished smooth with a
166 1.00 floating coat of neat cement on walls and bed concrete Each 2903.89
etc. complete.(i) Inside dimensions 455mmx 610mm
and 450mm deep for single pipe line.(iteam code
24016AA,24.44,S.O.R Ahemdabad City 2023-24)
Extra over items 136 for every additional depth of 0.1M. of
part thereof beyond 450mm depth for Brick masonry
chamber.(i) for 455mm x 610mm size.(iteam code
167 10.00 24017A,24.46,S.O.R Ahemdabad City 2023-24) Each 239.99
RCC Precast M.H.Frame & Cover Manufacture , supply &
Delivery at store or at side of work Precast RCC M200 Frame
& Cover Suitable to drainage M.H. and as per type design &
168 Drawing including cost of reinforcement M.S. Angles or Flat ,
cutting mold work etc.(GWSSB SOR 2021-22)
1 1.00 Frame Suitable for 50 Cm opening of MH No. 1255.00
2 1.00 Cover Suitable for 50Cm Opening Of MH No 1314.00
1 1.00 Frame Suitable for 50 Cm opening of MH No. 1120.00
2 1.00 Cover Suitable for 50Cm Opening Of MH No 1194.00
c House connection Chamber Light Duty
1 1.00 Frame No. 911.00
Providing and fixing pre-cast concrete kerb stone of gray
cement based concrete block 30cm length,30cm
height and 15cm thick of M200 grade concret as per
approved design and including excavation for fixing in
169 1.00 proper line and level,filling the joint with C:M 1:3 Rmt 376.43
(1cement:3fine sand) etc complete.(iteam code
14023A,S.O.R Ahemdabad City 2023-24)
Providing and fixing pre-cast Rubber Dye / steel Dye inter
locking concrete block 60mm thick with grade of concrete
M300 pnumatic compressed / vibrated mechanically and
as per approved design Confirming to IS 15658 :
including 35 mm Sand layer for levelling and filling the
170 1.00 joint with sand in proper line and level as per guidlines of Sqm 680.10
IRC : SP 63- 2018 etc. Complete. (iteam code 14033,S.O.R
Ahemdabad City 2023-24)
Providing and fixing eco-friendly light weight calcium
silicate false ceiling tiles having Tegular edge &
mm Thick Densified edges on the Tile Periphery for
Extra Strength The Light weight calcium silicate ceiling
tiles shall have , light reflection 85% non-combustible as
per B.S. 476 part IV, 100% humidity resistance and also
having thermal conductivity0.043° w/m KC.for the best
thermal Insulation . The Light weight calcium Silicate
tile shall be of approved texture Fine fissured/
Spintone/Cosmos having NRC value of 0.5 & Globe having
NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to
be laid on true horizontal level suspended inter locking
metal grid of hot dipped galvanized steel sections
171 35.00 (galvanizing @120 grams per sqm including both side) Sqm 1632.63
consisting of main ‘T’ runner suitably spaced at joints to
get required length and size of 24X38mm made from
0.30 mm thick (minimum) sheet, 1200mm centre to
centre, and cross ‘T’ of size 24X28mm made out of 0.33mm
(Minimum) sheet spaced 1200mm along spaced between
main ‘T’ at 600mm centre to centre to form agrid
of 1200X600mm and secondary cross ’T’ of length
600mm and size 24x28mm made of 0.30 mm thick
(Minimum) sheet(iteam code 16006,S.O.R Ahemdabad City
Providing and fixing false ceiling at all height including
providing and fixing of frame work made of special sections,
power pressed from M.S. sheets and galvanized with zinc
coating of 120 gms/sqm (both side inclusive) as per IS :
277 and consisting of angle cleats of size 25 mm wide x
mm thick with flanges of 27 mm and 37 mm, at 1200 mm
centre to centre, one flange fixed to the ceiling with dash
fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts,
other flange of cleat fixed to the angle hangers of
25x10x0.50 mm of required length with nuts & bolts of
required size and other end of angle hanger fixed with
intermediate G.I. channels 45x15x0.9 mm running at the
spacing of 1200 mm centre to centre, to which the ceiling
section 0.5 mm thick bottom wedge of 80 mm with tapered
flanges of 26 mm each having lips of 10.5 mm, at 450 mm
centre to centre, shall be fixed in a direction perpendicular
to G.I. intermediate channel with connecting clips made out
of 2.64 mm dia x 230 mm long G.I. wire at every junction,
including fixing perimeter channels 0.5 mm thick 27 mm high
having flanges of 20 mm and 30 mm long, the perimeter of
ceiling fixed to wall/partition with the help of rawl plugs at
450 mm centre, with 25 mm long dry wall screws @ 230 mm
interval, including fixing of gypsum board to ceiling section
and perimeter channel with the help of dry wall screws of
size 3.5 x 25 mm at 230 mm c/c, including jointing and
finishing to a flush finish of tapered and square edges of the
board with recommended jointing compound , jointing tapes
, finishing with jointing compound in 3 layers covering upto
150 mm on both sides of joint and two coats of primer
suitable for board, all as per manufacturer’s specification
and also including the cost of making openings for light
fittings, grills, diffusers, trap doors, cutouts made with
frame of perimeter channels suitably fixed, providing
additional sections for strengthening the oenings/cutouts,
Trapdoors all complete as per drawings, specification and
direction of the Engineer in Charge. Area of cutouts shall not
be deducted and no extra payment shall be considered for
additional sections provided. Only plan area shall be
considered for payment. All curved surfaces, recesses,
waffles and corbellings shall be part of the false ceiling & flat
area in plan shall be measured for payment. The rates are
also inclusive of necessary scaffolding, tools, tackles etc.
Complete for all floors and height with frame wherever
required for electrical & A.C. fixtures & grill all as per
drawings, specification and direction of the Engineer in
Charge. all as per manufacturer’s specification and as per
drawings, specification and direction of the Engineer in
Charge. Excluding the cost of painting with :
12.5 mm thick tapered edge gypsum plain board
conforming to IS: 2095- Part I
Dismantling aluminium/ Gypsum partitions, doors, windows,
fixed glazing and false ceiling including disposal of
unserviceable surplus material and stacking of serviceable
173 80.00 material with all lead as per instruction of EIC. Sqm 17.68
Providing and fixing in position Marine Plywood of specified
thickness following code IS 710 - 1976 of approved makes as
per Interior design drawing/ Instruction of EIC for all type of
loose and fixed furniture, Panelling, Partition, Bed head
panel etc. The rates are inclusive of all lead and lift,all floor
174 9.00 levels, all heights, all material, fixing, scaffolding, labour, Sqm 806.25
Wastage etc. complete in all respects.
a)Plywood 19mm th.
Extra over for plastering on ceilings and sofits of stairs upto
floor two level instead of plastering on walls.(iteam code
175 10.00 17006,17.91,S.O.R Ahemdabad City 2023-24) Sqm 24.57
20 mm thick sand faced cement plaster on walls upto
height 10 metres above ground level consisting of 12 mm
thick backing coat of C.M.1:3 (1-cement:3-
sand)and8mmthickfinishingcoatof C.M. 1:1 (1-cement : 1-
176 5.00 sand) etc. complete.(iteam code 17009,17.95,S.O.R Sqm 297.68
Ahemdabad City 2023-24)
Cutting out cracks of roof terrace to V- section , cleaning
out, wetting , grouting with cement and sand slurry 1:3 (1-
177 10.00 cement 3-sand )(iteam code 221002A,21.23,S.O.R Rmt 64.58
Ahemdabad City 2023-24)
Conveyance charge of earth, lime, murrum, building rubbish,
manure, garbage, sludge, excavated rock, fly ash, aggregates
of any kind executed outside the road site. Rate also includes
178 spreading & levelling etc complete. Internal conveyance
above 50 mt done within the work site is not payable.
20.00 a) Lead From 5 Km to 10 Km. Cmt 78.54
20.00 b) Lead From 10 Km to 15 Km. Cmt 104.65
P/A Tremix with dewartering machine and floater machine
on constructed CC work for finishing the surface as per
requirement. The rate including all machinaries, labor,
179 1.00 loading, unloading, transportaion etc complete as per SMT 54.00
direction given by engineer in charge.
Making 15 mm. Groove in RCC work on road & filling it with
polysulfied selant & finished ot good incl. all labour charges
180 1.00 etc. comp.as directed. RMT 30.00
Repairing damaged M.H. and rasing M.H. up to road level
incl. removing damaged brick work and repairing by brick
masonry in C.M. 1:5 and plaster in C.M. 1:3 and fixing C.I.
181 steps and existing MH sheet cover, removing the debris
from MH and carting the same as directed.
1.00 (A) up to 0.15 mt. (@ Two Coarse) No. 728.82
1.00 (B) up to 0.35mt. (@ Four Coarse) No. 1155.44
1.00 (C) up to 0.65 mt. (@ Seven Coarse) No. 1786.49
Constructing Chamber of following size including excavation,
refilling, BBCC (1:5:10) for foundation, C.C.Channel (1:2:4),
finished 15 mm thick cement plaster inside in CM 1:3,
182 finishing with cement slurry, Brick masonary in CM 1:5 &
excluding the cost of chamber seat cover etc.completed.
0.60 X 0.45 mt. size Inside Clear, Depth from 0.0 to
0.60 X 0.75 mt. size Inside Clear, Depth from 0.0 to
0.75 X 0.75 mt. size (Inside Clear) Depth from 0.0 to
Constructing Bombay Pattern Type Catch Pit of size 0.60 x
0.60 depth up to 1 mt including excavation, B.B.C.C. (1:5:10),
23 cms thick brick maso. wall in the prop. of CM (1:6) with
mm thick IPS flooring in the prop M15 at bottom and 15 mm
183 1.00 thick cement plaster inside the catch pit in the proportion of No. 3110.80
CM (1:3) with out jali etc. comp. as directed.
CatchPit Jali (Heavy duty) Fixing P/F FRC catch pit jali with
frame 600mm x 600mm clear opening etc. comp.. As
184 1.00 directed by engineer in charge. No. 1377.64
R. C. C. PIPE (Vertical Cast) Providing and supplying ISI
Standard R.C.C. pipes in standard lengths of following class
and diameter suitable for either collar joints or rubber ring
joints including all taxes, insurance, transportation, freight
charges, octroi, inspection charges, loading, unloading,
conveyance to departmental stores, stacking etc Note : One
collar should be supplied with each full length plain ended
185 RCC pipe, cost included in rates below. One rubber ring
should be supplied with each full length socketed pipe, cost
included in rates below.
Lowering, laying and jointing R. C. C. pipes of following
diameters in proper position, grade and alignment at all
level as directed by Engineer-in-charge including conveyance
185 A from stores to site of work, labour, giving hydraulic testing
as per ISI code.
Providing and supplying,and jointing ISI mark only standard
length stoneware pipes of following class and diameter
including excavation for laying of pipes, insurance,
transportation, freight charges, octroi, inspection charges,
loading, unloading, conveyance to departmental stores,
stacking etc. compl. (IS651/1989 or its latest revision)
including labour work for lowering, laying, joiting with
186 cement mortar (1:1) proportion, proper postion, grade and
alignment and all level as directed by engineer in charge
including store to site of work jointing material etc complete.
a 3.00 100 mm dia Rmt 165.52
b 3.00 150 mm dia Rmt 242.98
c 3.00 230 mm dia Rmt 400.54
Hiring Charges For J.C.B.Machine Inclduing Cost Of Fuel,
Operator, Dirver Etc..
Supplying Pneumatic Breaker Machine for RCC Slab or
Asphalt Demolishing Work on site by using Operator, fuel,
power Supply etc. Complete as Directed. (No payment
should be allowed for non working condition of machinery
188 1.00 and for pipe line excavation and M.H. work. Allowed only for Hr 600.00
break down work) (Based on Previously approved rate by C E
Constructing Slab type M.H. Chamber of the following size
including excavation, refilling, brick bats cement concrete
(1:5:10) of thickness 15 C.M., CC Channel (1:2:4) of thickness
10 C.M., finished 15 mm thick cement plaster inside &
outside (Only for shaft) in CM 1:3, finishing with cement
slurry, P/F 4 mm dia M.S.Steel HDPE coated steps 35 cm c/c
189 at 35 cm staggered in masonary CM 1:5, RCC Slab in CC
1:1.5:3 of thickness 23 C.M., including Cantering &
reinforcement (double jalli at 15 C.M. c/c bothway 12 mm
dia.) but excluding the cost of Manhole seat cover
etc..completed. of Size 1.00 X 1.40 meter (Inside Clear,
M.H. length should be parallel to the flow.
1.00 to 2.00 meter depth, (Slab at Ground level)
2.00 to 3.00 meter depth, (Slab at below 0.6 mt. From G.L.)
3.00 to 4.00 meter depth, (Slab at below 1.00 mt. From G.L.)
Making connection to the ex.M.H.in running sewer incl.
Dewatering and other required machinery etc. of following
dia pipes at any convenient time. All damaged work shall be
well repaired as per instructions. etc..complete.
a 2.00 a. 150 mm to 300 mm dia. No. 1339.29
Cutting the pipes of following dia coming in the new M.H.in
running sewer including cutting bars, including removing
191 debris /silt from the M.H. and carting at a suitable distance
etc..complete as directed. No payment for M.H. work will be
made until pipe is not cut completely in all respect.
a 2.00 150 mm to 300 mm dia. No. 1133.93
Providing Kachha of Pakka Dummy in the following dia
pipes and removing the same after completion of the
192 connection work as directed.
a 2.00 (A) 100 mm to 300 mm dia. No. 199.11
b 2.00 (B) 350 mm to 600 mm dia No. 302.68
Providing Dead Cantering using good quality Country Wood
Planks, wall Plate of required thickness and size including
193 5.00 placing the nece. supports of reqd. size, nailing, fixing with Smt 312.50
mortar, levelling. All specification for dead centring as per
standard engg. practice etc. comp. as directed.
Providing and operation dewatering Pump including fuel
charges & operator Charges etc. as directed etc. comp. (Shift
194 2.00 for Eight Hour) (For Each Pump Set, No payment should be Shift 600.00
allowed for non working condition of machinery)
Providing & Fixing the double layer safety net along the
195 5.00 scafolding to avoid any free fall of debris etc. complete. Smt 194.00
Providing & Fixing the green/black colour hessaian cloth to
196 5.00 cover the scafolding etc. complete. Smt 51.00
Structural steel work ( Confirming to IS 4923- 1997) riveted,
bolted or welded in builtup for all type sections, in framed
work, including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer all
complete as per the structural designs and
197 30.00 directions of Engineer in charge. Safety grills/doors of Kg 126.68
required pattern for windows / Door/ ventilators using M.S.
flats/bar/box sections as per design and drawing including
one coat of primer.(iteam code20054,S.O.R Ahemdabad City
F.R.C. Extra Heavy Duty (EHD-35) Manhole Covers &
Frames Cover : 728mm ø & 100 mm thick circular cover,
35.00 MT load design, 100x2mm MS flat allround, 16mm ø
plain round bar for lifting the cover & should be fitted with
198 1.00 plastic cups. Frame : 560 mm ø clear opening, outer size- Set 3354.74
888x888x175 mm. On the upper periphery of frame 25 x
mm wide MS flat should be well embed in concrete to
protect the edges of frame. FRC E.H.D.-35 manhole cover &
frame described as above
F.R.C. Heavy Duty [HD-20] Machinehole Covers - 560 mm ø
clear opening, The dimension of frame and cover as per
199 1.00 mentioned in Amend No.1 to IS 12592 : 2002 table 1. No. 1720.44
F.R.C. Medium Duty [MD-10] Machinehole Covers - 560mm
200 1.00 ø clear opening, The dimension of frame and cover as per No. 1255.52
mentioned in Amend No.1 to IS 12592 : 2002 table 1..
Carting and Fixing M.H., Chamber or Catchpite Seat and
Cover in line and level to match exisisting road level in C.C.
201 1.00 1:2:4 and finishing smooth, watering and protecting for 7 No. 750.00
days etc. complete as directed. M.H. seat cover will be
supplied byA.M.C.(from any store)
Supplying, labour for break down repairing work for
activities like excavation, disliting, removing debris from
202 trench back filling etc. comp. as directed by Eng.in charge.
5.00 Mazdoor at day /Night No 363.30
5.00 Fitter at day / Night No 380.30
5.00 Makadam/ supervision at day / Night No 379.46
P/F. to wall ceiling and floor galvanized mild steel tubes
(Medium grade) of the following nominal dia. with all tube
fittings and clamps incl. making good the wall, ceiling and
203 floor. (At any floor level) (Bldg.Sor 2015-16,23.2,23001 a to
Providing & Applying Cement Popada Plaster In
Cement Mortar In 1 : 3 Incl. Cleaning Surface Before
204 40.00 Plastering Rate Also Incl. Scafloding, Watering , And Neat Smt. 120.00
Finishing Etc. Comp. As Dire.(N.S./ARC)
Providing and applying fibere reinforced cementitious micro
concrete work in cellings and beams incl.mixture of
CEMSCREED HM (F) fair mate company material, FBR
bonding agent material with water in suItable proportion
anti corrosive treatment on exposed beam,celling steel bars
205 25.00 with safeCore R incl.all kind of labour etc.comp.including Smt. 530.00
three coat of white wash.(Approved Rate in ARC)
Labour Work for moulding the polish kota stone surface rate
also including provding cutting and grinder machine for
206 5.00 molding work etc.complete as directed.(app.rate) Rmt. 150.00
Labour work for Polish kota stone surface rate also including
providing cutting and grinder machine for molding work etc
207 5.00 comlete as directed.(app. rate) Smt. 64.00
Providing And Laying Cement Concrete Flooring For
I.P.S.1:2:4 (For Indian Patent Stones) (1 Cement: 2 Coarse
Sand:4 Graded Stone Aggregate 20 Mm. Nominal Size)
208 10.00 Lain In Layer Finished With A Floating Coat Of Net Smt. 198.45
Cement.(40 Mm Th.)(SOR 2021-22 P.160,Item
Additional Rate For Providing Water Proofing Solution in I.P.S
Providing and Fixing pvc.Door (sintex door-equivalent) with
necessary alluminium fitting with EL-7 section frame
210 17.00 (Approved Rate as per ARC) Smt. 1617.00
P/F glass of 4 mm thik for vent lowers and window with
211 50.00 wooden border patti as per instruction of eng. In No. 150.00
chage.(app.rate)
Providing and fixing rough cast wired glass 6 mm thick
bedded in putty and thick with wooden beading including
the cost of wooden beadings of Indian teak wood and
212 necessary cutting of glass. (SOR 2021-22 PG NO-148,13002)
10.00 (C) wired figured glass. Smt. 659.58
Labour work for fixing above or any interlocking
blocks/nimbhada on up to 50mm th sand
bedding,levelling,watering anf fixing. Rate incl. average 30cm
213 10.00 depth for excavation and or filling,carting away Smt. 69.64
debries/excavated material up to 5 km and cleaning the site
etc.comp. as directed.I00194
Providing & Laying China Mosaic Flooring On Terrace With
6Mm Th.White Or Coloured Glazed Tiles Chips Of Mini.25 To
35Mm Approved.Square Or Rectangular Shape & Fixing
It.Before Start The Work Remove All Existing Flooring &
Open Old Slab Surface With Wire Brush & Fill Crack If Shown
With Water Proof Material.Than For Making Level Gps.Work
Done In Mini.45 To 50 Mm Th.& Fixing.China Mosaic In
Cm 1:3 With Neat Cement Slurry At Top & Filling The Gap
With White Or Colour Cement With Finishing Smooth
214 5.00 Surface & Even Shade Incl.Cleaning Of All Dirt,Dust Smt. 700.00
& Other Foreign Matter.Rate Including For Making
Colour Patta,Round Vata With Fixing Neccessary Water
Spout Opening Gap Etc.Comp.As Directed.(As per A.R.C)
Providing and laying polished granite stone slab 18 mm thick
in risers of steps, dedo and pllars laid on 10 mm thick
cement mortar 1:3 (1 cement : 3 coarse sand) and jointed
215 8.00 with gray cement slurry including rubbing & polishing etc. Smt. 2672.00
complete. (SOR 2015-2016,SR. NO. 23A CH.14 )
Providing & fixing 2.00 mm thick F.R.P. sheet of good quality
and standard make rate also includes necessary fabrication
structure in the grid of 1'-6" x 1'-6" size usiung hollow pipe of
size 3/4" x 3/4" , 2" x 1" & 1" x 1" rate also inclusive
necessary bending ,cutting and fabrication charges and
216 20.00 priming coat and 2 coats of oil paint of shade approved by Smt. 1865.00
engineer in-charge rate also includes washer and silicon
paste required for fixing the sheet in good quality as
diredted.(As per ARC)
Conveyance charges of earth lime, murrum, building rubbish,
manure, garbage, sludge, excavated rock, fly ash, aggregate
217 8.01 of any kind etc. comp. upto 5 km lead. (Bldg.S.O.R. 2021- Cmt. 235.51
Providing & Fixing Chromium Plated Brass Flush Cock
With Lever Of "Ess Ess" - Trend Series Or Equivalent
218 1.00 Make Incl.Fixing In Pipe Etc.Comp.As Dir.Of Engg.In No. 1800.00
Charge.(N.S.) (1) 25 Mm Dia.I00117
Provdg. & fixing 12.5 lit.PVC Flush tank with nece.fixtures
219 15.00 etc.comp as per site condition (R&B Sor 21-22 I.C NO No. 1165.20
P/F Jet Spreay at Europeon WC Pan, incl nece. lath
connection, stop cock, and other fixing material and labour
220 30.00 as per inst. of engineer in charge(R&B Sor 21-22 I.C NO No. 361.00
Providing & Fixing Polytheline Over Head Tank With
Necessary Dia.Holes For Outlet,Inlet Over Flow And
221 10000.00 Washout Necessary Washer And Checkput Etc.Comp.(N.S.) lit 7.72
P & F app.quality for Conseal lock in Alu.door .as per inst of
222 1.00 engg in charge .etc.comp.(app.rate) No. 300.00
P & f app.quality for brass baby latch (door stopper) as per
223 1.00 inst of engg in charge .etc.comp (app.rate) No. 180.00
Providing & Fixing In Position Alluminium Doors With
Frame Using Approved Quality Anodised Extruded
Alluminium Section As Approved By Engg.In Charge(Jindal
Alluminium) (A)Frame Sections 101.6x44.45 Mm(B)Shutter
Bottom Vertical & Top Section 83.5x44.45 (Wt.1.31
Kg/Mt.)(At 1.31Kg/Mt)(C)Shutter Bottom Section
At14.3x44.45 Mm At (1.37 Kg/Mt) Shutter Middle Section
224 30.00 At 100x44.3 Wt.(1.37Kg/Mt) Incl.Providing & Installing 5 Smt. 2900.00
Mm Thick Approved Color Acrylic Sheet Of Standard
Quality Fixed With Glazing Chips On Upper Pannel &
Laminated Sheet On Lower Pannel (Wtt.0.13 Kg/Rmt)
Etc.Comp.As Direction Of Engg.In Charge. (N.S.) I00134
Providing & Fixing In Position Alluminium Window Sliding /
Fix Type With Frame Using Approved Anodised Extruded
Alluminium Section As Approved By Engg.In Charge.(Jindal
Alluminium) Units Equivalent (A) Frame Sections 65 X
Mm (At 0.41kg/Mt) (B) Sliding Frame Bottom Section Of
61.85 X31.75 Mm (At 0.41 Kg/Rmt) (C) Shutter Top &
Bottom Section 40 X 18 Mm (Wt.0.41 Kg/Rmt) (D) Shutter
Interlock Vertical Section 10 X18 Mm.(0.41 Kg/Rmt) (E)
Shutter Vertical Of 40 X 18 Mm (0.41 Kg/Rmt) Including P/F
Installing 5 Mm Thick Approved Color Acrylic Sheet
Of Standard Quality Etc.Comp.(N.S.)
Provding & fixing Aluminum section partition with powder
coating using 2.5'' x 1.5'' all section work incl.p/f 5 mm thick
glass in upper portion and 10 mm th. Novapan panel in lower
section Work incl.fixing the partition in wall/floor with
226 80.00 nece.screws,rubber gasket & other fittings etc.comp. as Smt. 2500.00
directed by engg.incharges.
Providing & Fixing In Position Alluminium Vents With Frame
Using Approved Anodised Extruded Alluminium Section
As Approved By Engg.In Charge.(Jindal Alluminium) Units
Equivalent (Approved Rate) Frame Section Of 63.50 X
227 1.00 38.50Mm (Wt.0.68 Kg/Rmt) Incl.Providing & Installing 5 Mm Sq. M. 1950.00
Thick Approved Color Acrylic Sheet Of Standard Quality
Etc.Comp. I00136
Providing fiiter for D.I./P.V.C./C.I./M./A.C. Pressure water
pipe linmaintenance work with necessary manpower, tools,
plants, and equipments, and any other works required for
228 10.00 AMC as per instruction of Engineer in charge etc. complete. No. 474.00
I03723 As per Market Rate
Providing and fixing stoper (M.S.) 6 inch with necessary fiting
in wooden door including removel of old fiting if any etc
229 1.00 completed as directed. I00870 6 inch No. 47.00
Providing and fixing Aldrop 10 mm size (M.S.) with necessary
fiting in wooden door including removel of old fiting if any
230 1.00 etc completed as directed. I00872 Aldrop 10mm No. 158.00
Providing and fixing handle (M.S.) 4 inch size in with
necessary fitting in wooden windows including removal of
231 1.00 old fitting if any etc completed as directed.I00873 No. 39.00
Providing and fixing stopper (aluminium) 6 inch with
necessary fiting in wooden door including removel of old
232 1.00 fitting if any etc completed as directed. I00890 6 inch No. 40.00
Providing and fixing Aldrop 10 mm size (aluminium) with
necessary fiting in wooden door including removel of old
233 1.00 fiting if any etc completed as directed I00891 No. 138.00
Providing and fixing handle (aluminium) 6 inch size in with
necessary fitting in wooden door including removal of old
234 1.00 fitting if any etc completed as directed.I00889 No. 36.00
Reparing of existing Aluminium window/door/partition by
making necessary addition/alteration in same sides. Rate incl
of necessary fittings required and all labour included. If
235 1.00 necessary rate also incl. of removing from position and No. 500.00
refixing it at same place after repairing it, etc comp. as
directed. Sub Desc : As per approved rate of AMC MET work
Repairing of Doors/Windows shutters and Frames including
refixing-aligning shutter, providing, replacing, fixing MS
hinges, Aluminium aldrops, stoppers, tadi etc. complete
236 1.00 excluding painting as per specifications.(app.rate) No. 250.00
Providing & Fixing wall,ceiling and floor 10 Kg.F/Sq.Cm
mm working pressure polythelene pipes of low density,
complete with special flange compression type fittings,wall
237 12.00 clips etc.making good wall ceiling and floor as directed by Rmt 785.00
engg.in charge etc.comp.
P/F. 10 mm thick Novapan sheet of approved quality
including fixing on partition with necessary all fixtures as
238 30.00 directed by engg.in charge etc.comp Smt. 1400.00
P/F. new 12.5mm th. Gypsum board ceiling with necessary
heavy weight GI framing members as per site
requirement.Work incl. Supplying of app.brand gypsum
239 80.00 boards and fixing it as false ceiling in line and level with all Smt. 650.00
necessary hardware and labour etc. comp.as dire. (At any
GLASS FILMS (sun control, Safety film, decorative, reflective,
frosted, opaque film etc) Imported Lumaar make as
240 13.00 approved by engg.in charge etc.comp. Smt. 540.00
Providing and fixing 4 mm th. Acrylic sheet of approved
quality including fixing with door/window shutter & frames
241 3.00 with necessary all fixtures as dircted by engg.in charge Smt. 3140.00
Providing & Fixing Floor Spring including fixing shutter etc.
242 1.00 complete as per inst. of engineer in charge. No. 3300.00
P/F. thermocol ceiling with necessary aluminium T section
x 25 x 1.2 mm inclusive fixing it to all wall to ceiling junction
and at junction position of two sheets ,item also includes p/f
20 mm thick plain thermocol sheets size (1 x 0.5 mt) with all
243 1.00 necessary fastening and hardware etc. comp.as dire. (At any Smt. 375.00
labour charge for cleaning U.G. and O.H. tank by modern
science technology with six stage process as below:
(1)Dewatering existing water by submersible pump.
(2)Hydro jetting by 150kg/sqcm pressure.(3)Vaccum cleaning
to suck the sludge and turbidity on bottom surface.(4)Heat
air system by 80C temp for drying corners and all side of
tank.(5)Antibacterial chemical spraying to all surface of tank
and then(6)Ultra-violet radiation pan treatment to tank in
this six stages on site classic supply etc.Electric connection
shall be provided by AMC MET without charging any extra
cost.the complete tankcleaning by micro cleaning system
comp. as ditected.rate of above process are as below
capacity of tank.
A 1.00 up to 5000 litre NOS 1200.00
B 1.00 5000 litre to 10000 litre NOS 1500.00
C 1.00 Under Ground water tank LITER 0.05
Providing and applying texture paint at approved quality,
colour scheme, including preparation of surface, primer
coats+2 coats of putty and texture paint, as per
245 16.00 manufacture's specification, scaffolding, roller finish etc Smt. 495.00
complete as per instruction of engineer in charge
Supplying and installation of 10mm thick recycled rubber
flooring having anti-skid and sound absorbing properties,
square shaped, with different color optns for create flooring
pattern, should be installed with proper adhesive as per
manufactures's guidelines, joints of surface to be done
246 5.00 properly to prevent dirt & watepenetration inside the Smt. 1234.00
surface. etc complete as per instruction of engineer in
Arrangement of zula with two or nece. skilled labour for
repairing & maintenance work out side building work
247 26.51 etc.complete as per insructer incharge(At any floor level) No. 950.00
Providing Scaffolding for Demolition Plaster Work & painting
workby 'H' Frame Stand of by any means like bamboo, balli
etc. including carting material work site and removing after
248 50.00 completion of work. Rate include any type rent etc. Smt. 40.00
complete for any height as directed by engg. in charge.
Providing, Manufacturing, Fixing Chain Link Jali 8".0" X 4".0"
as per detailed Sketch & instruction of Engineer in Charge
same as Lal Darwaja Garden Pattern Consisting of 3" dia MS
pipe A class 5".4" height fixed at 8".9" in C.C. (1:2:4) block of
9" X 9" X 9" size chain link jali 2" X 2" X 10 gauge fixed in 35 X
35 X 5 mm MS angle frame of 8".0" X 4".0" size with MS flat
of size 25X3 mm welded with jali etc. Comp. The Jali is to be
249 1.00 Welded to MS angle with MS Flat as per instruction given. Rmt. 1940.00
The MS Pipe Jali, MS angle frame are to be painted one coat
of primer & two coats of paint as directed, in line and
level.The two hold fast has been welded at equal distance at
the bottom angle of jali for support fixed in C.C. as directed
by Engg. in Charge.
Providing and fixing Aluminum Composite Panel signages of
various size and in any language. The 2 mm thick Aluminum
composite panel shall be cladded with retro reflective high Sq.
intensity grade radium sheets. The signages shall be of any Inches
251 10.00 G.I. Coupling 50 mm dia A-Class RMT 80.51
252 10.00 G.I. Coupling 40 mm dia A-Class RMT 40.68
Providing & Fixing Door closer-complete of Approved make
253 5.00 to wooden / Alluminium Doors as per direction of engg.in No. 480.00
Providing and applying pressure grouting with Water
proofing materials silicon baseWater repellent compund
254 1.00 including matrial, labour with required all machinery and etc Smt. 2345.00
complete. (R.A.)
Providing and fixing Polycarbonate roof Lexan sabic 10 mm
th.sheets of approved make, on structural roofing / sky ligh
structures in shapes as per Architect’s drawing. The rate shall
include cost of scaffolding, screws, nuts, bolts and all
255 5.00 necessary fixtures and fastening etc complete (Rate excluded Smt. 2094.29
structural steel work)ARC
Providing and laying brick bat coba water proofing of
average 100 mm. thick for sunk, balcony, terrace, rain water
gutter at all heights/ floors using cement mortar 1:3,
arranging brick bats according to the slope, adding suitable
water proofing compound for water-tightness and again
providing on top cement mortar 1:3 including addition of
waterproofing compound and finishing the top with neat
256 10.00 cement @ 2.75 kg/m² and preparing the rough surface if Smt. 567.00
required as per direction and instructions, complete. The
work should be carried out through an approved specialized
agency. The contractor to give testing for water tightness
and provide guarantee for 10 years on Rs. 300/- stamp paper
in approved Performa. as directed by EIC. (R.A)
Providing and injecting approved grout in proportion
recommended by the manufacturer into cracks/honey-comb
area of masonry by suitable gun/ pump at required pressure
including cutting of nipples after curing etc. complete as per
directions of Engineer-in-Charge. Stirrer mixed SBR
Polymer(of approved make) modified Cement slurry made
with Shrinkage Compensating Cement in masonry work. (The
payment shall be made on the basis of actual weight of
approved grout injected.)
Providing & Placing dual shrinkage-compensated,high flow
cementitious microconcrete added with aggregates in 1:0.5
(1 Powder:0.5 aggregate)proportion & suitable water
microconcrete ratio so as to acheive compressive strength
not less than 40MPa at 28 days for column jacketting
inclusive of Labour, material, curing and equipment for all
heights, location, shape & size as directed by the
architect/engineer incharge. (The mode of measurement
shall be as that of RCC as per IS code)(APPROVE-ARC)
Providing & Applying One componant dual shrinkage-
compensated structural Grade ready to use repair mortar in
two or three layer for repairs of beams etc. including all
materials, labour etc. for all heights, location, shape &
259 10.00 size.The finish surface to be level matched with the existing Kg 40.40
adjoining surface etc. complete as directed by
Architect/Engineer Incharge. [Quantity consumed shall be
accounted for payment purpose].(APPROVE-ARC)
Providing & applying one or more coats of
Nondegredation(which dont reqire removal), acrylic resin
based membrane forming single componant liquid curing
260 10.00 compound for sealing of moisture & curing including all Smt 57.00
materials labour etc. for all heights,locations, shape & size as
directed by the engineer incharge.(APPROVE-ARC)
Providing & applying of 6-9 mm thick 1:3 CM (1 Cement :
fine sand ) mortar over one coat of epoxy bond coat on all
261 1.00 type of surface for all shape,size & height including all Smt 661.00
labour, material,scaffolding, curing etc.complete as directed
by the Engineer incharge.(APPROVE-ARC)
Providing & applying polymer modified cement mortar in the
proportion cement : sand in 1:3 (by weight) fortified with
SBR in 2 or 3 or 4 layers upto 50mm overall
thickness,wherever total thickness of repair is exceeding
262 1.00 50mm, use of 10/ 6 mm down size aggregate may be Ltr 937.00
required. The finish surface to match with the existing
adjoining surface etc. complete as directed by Architect/
Engineer Incharge. [Quantity of SBR actually consumed shall
be measured for payment purpose].(APPROVE-ARC)
Providing & applying polymer modified cement mortar in the
proportion cement : sand in 1:3 (by weight) fortified with
SBR in 2 or 3 or 4 layers upto 50mm overall thickness. The
finish surface to match with the existing adjoining surface
263 1.00 etc.complete as directed by Architect/ Engineer Incharge. Smt 1187.34
[Quantity of SBR actually consumed shall be measured for
payment purpose].(APPROVE-ARC)
Galvanic Sacrificial Protection of steel:-Providing and fixing
sacrificial zinc anode to prevent initialization of corrosion of
reinforcement due to chloride ingress from VECTOR
Galvashield XPI or equivalent at Min. 2 to 3 anode/sqm area
of concrete (spacing of 300 to 600mm), covered with mortar
with of resistivity less than of parent concrete on the
cleaned reinforcement steel as per manufacturers
specification before applying passivation coating. Item rate is
inclusive of the meterials all labour, supervision , tools and
tackles and transportation etc. complete as per specification
and as directed(APPROVE-ARC)
Providing and fixing PVC plain colour false ceiing with grid
type with a luframe consisting of 600mmx 600mm 3mm
thick plain PVC sheet used as panel insert in a frame work
made using an odized alluminium T section of size 1”x1” (25
x 25mm,19 gauge or 1mm thick) in square pattern of grid
sizes of 2x2 (600 x 600mm).The alluminium frame work is
265 1.00 supported from the ceiling with the help of G.I.hook and Smt 300.12
G.I.wire/6mm M.S.rods of required sizes to maintain proper
level etc.The aluminium frame work is supported on side
wall with the use of alluminium Lsection of size1x1
(25x25mm)angle set.Complete as per direction of Engineer
incharge. Manufactures, specification and drawing
Providing and fixing 30 mm thick FACTORY MADE SOLID
PANEL PVC DOOR SHUTTER consisting of frame made out of
M.S. tubes of 19 gauge thickness and size of 19mm x 19mm
for stiles and 15mm x 15 mm for top and bottom rails. M.S.
frame shall have a coat of steel primers of approved make
and manufacture, M.S. frame shall be covered with 5 mm
thick heat moulded PVC ‘C’ channel of size 30 x 50 mm
forming stiles, and 5mm thick 75mm wide PVC sheets for top
rail,lock rail and bottom rail on either side, and 10mm (5mm
266 5.00 x 2) thick, 20mm wide cross PVC sheet as gap insert for top Smt 1960.00
rail and bottom rail, Panelling of 5 stiles and rails with 30mm
wide x 5mm thick PVC sheet beading on eighter side, and
joined together with solvent cement adhesive,. An additional
5mm thick PVC strip of 20mm width is to be stculk on the
interior side of the ‘c’ channel using PVC solvent cement
adhesive etc. complete as per direction of Engineer in
charge,manufacture’s specification and drawing.(APPROVE-
Supplying Potable Water Tanker attached with motorpump
to be filled from nearby water distribution station of AMC.
with 30 meter Delivery Pipe. The tanker should be supplied
267 10.00 as & where reuired & when order placed by Engineer In- Trip 450.00
Charge The rate includes the fuel charge, driver's charge
etc.complete. (APPROVE RATE At amc met-piu)
2mm Aluminium/ 4mm ACP sheeting fixed with Type-Class-B
High Intensity Grade Sheeting as per IRC67:201 reflective
sheeting of size including lettering and signs as
268 3.00 applicable,pageNo38,Item code-M1048 Ahmedabad City Smt 3955.08
Building SOR 2023-24- With out GST(APPROVE ARC)
Providing and fixing of Roller blind curtain/blackout.The
fabric shall be woven from formulated platisol extruded over
a polyaster yarn.The fabric should be weaved to provide
269 5.00 subtle view of the side of the blind and should offere Smt 2610.00
limination of glare and sunlight radiance up to a minimum of
80%.The fabric shall be flame retardant.(Approved rate)
Wall panelling with 12mm MDF fixed to existing alluminium
framing and making grove as per design and finished with
270 1.00 royal plastic paint as per instruction of engineer incharge. Smt 1688.00
Providing&Connecting 75mm/100 mm dia PVC joints like
Coupler,Tee,Y-joints,Connecting Pipe to wall,ceiling&floor
open/concealed PVC pipe line 10Kg. F/Sq.Cm working
271 10.00 pressure of" Prince/Finolex" or equivalent Brand of following NOS 880.00
nominal bore with all required fitting with brass insert
wherever required,clamps&solution incl.making good the
wall, ceiling and floor.
Providing and laying ACP sheet for Elevation to be fixed on
availabel alluminum section structure,all fixing
272 1.00 materials,finishing,all lead and lift,etc.complete as per Smt 2200.00
engineer in charge
Providing and laying ACP sheet for Elevation including fixing
on alluminum section structure,all fixing
materials,finishing,all lead and lift, etc. complete as per
engineer incharge.
Providing&Fixing Stair/Balcony Railing as per Consultant's
Design from M.S.square Rectangular,Round pipe of required
Dia,M.S.Flat,Angle,channel&other sections of required size
as per detail work include
274 10.00 sutting,bending,welding,grinding,Fixing with necessary Rmt 965.00
supports-hold fasts,Application of one coat of Zinc
Primer,Two coats of Oil Painting etc.complete.(N.S.)
Fabricating,supplying and fixing in position SS railing for
staircase and balcony with brush finish and 304 grade as
perIndian Standrd and detailed drawing including
grinding,cleaning and filling the welded spots with SSfinish
(Only Length will be paid for payment heigth
275 10.00 max.1.2mt.).The Work to be executed as per consultant Rmt 4213.00
drawing.Top Rail:S.S.Railing pipe 50mmx16GAS IS 304 Grade
Vertical Support: S.S.Rialing Sq pipe 32x32mmx16 GAS IS
Grade (at every 1.0mt to 1.20mt c/c)Horizontal Safety
members :S.S. Railing pipe 16 mm x 16G ASIS 304 Grade (4
Providing and fixing 23cms wide chicken mesh jaali with
nails&then application of 15mm plaster on R.C.C.&Masonary
276 10.00 joints as per directed of Engineer in Charge Rmt 220.00
Providing&Mixing of Waterproof Chemical in Cement mortar
for Inside/outside Plaster work of"Roof","Fosroc"or
277 1.00 equivalent make in proportion as per company's user Liter 260.00
manuals&Direction of engg. In charge.
Providing and fixing brush finish stainless steel(304)stair case
railing which includes cutting/bending/welding/buffing to
give brush finish and grouting in cement concrete with
anchor fasteners without disturbing the flooring or as
approved by the consultants.THREE Horizontal pipes of
38mm diameter each and top pipe of 50mm
diameter.Vertical Post of size 50mm diameter at every
mm.At the end and start of the flight,baluster of75mm
diameter pipe shall be fixed.
Providing and fixing Kitchen sink with C.I. or M.S.
brackets,painted white including cutting holes in walls and
279 1.00 making good the same but excluding fittings. ©Vitreous Nos 2257.69
China Sink. (i) 600 mm x 450 mmx150 mm size
Providing & Fixing S.S.304 Grade Sink of Nirali / Krishna or
Equivalent Make for Kitchen Platform of size :24"x18" as per
280 3.00 Direction of engg. In charge Nos 4650.00
Supplying and fixing Conductive anti static homogeneous
Anti bacterial & Anti fungal Vinyl flooring rolls of P group of
approved make & shade minimum 2.0 mm thick of standard
sizes as per EN 649/relevant code of manufacturers
specification having 10 years replacable warranty over the
existing floor. The rate shall include all cuttings and
wastages, cutting and providing tile above electrical
trunking, cost of all materials adhesives of approved make
etc, including welding of joints., Coving and copper strips,
281 1.00 complete all as per detailed drawings and specifications as Smt 2307.21
directed by EIC Material to be installed using Conductive
Adhesive only. Only laid area will be measured for payment.
Rate Includes lead and lift at all floors. The item to include all
materiral, fixing, scaffolding, labour, Wastage etc. complete
in all respects. Note: No extra payment pay for architectural
Ornamental Design upto 10% of flooring area. Rate shall be
inclusive of cutting of tiles in any shape, at any level for
service cutout.
SIGNAGES HANGING FROM CEILING
Providing,Fabricating&Fixing signage's using 304 grade
Stainless steel1.5mm thick brushed steel finish plate (2nos)
with 8mm thk. Acrylic sheet covered with vinyl of approved
colour,sandwiched between two S.S plate and fixed with s.s
struds.Sandwiched plates should be fixed in 12mmX12mm
S.S 1.5mm thk .304 grade frame and punched(lasercut)
lettering carried out on both the s. s plate so frequired size
and text as directed by Engineer and hanged to ceiling with
the help of S.S 8mm thick chain at both ends with making all
the fixing arrangement to the ceiling and to the plate
providing and Fixing High Quality Vinyl Printing with Pasting
in Lamination in 3 mm foam sheet with loading, unloading,
283 1.00 labour Charges ETC Complete.Approved Rate in Publicty Sq.Feet 62.00
Department I.N.6,7,16
providing and Fixing Recto reflective Vinyl Printing with ACP
sheet Sinages with loading, unloading, labour Charges ETC
284 1.00 Complete.Approved Rate in Publicty Department I.N.34 Sq.Feet 240.00
FIRE EXTINQUISHER (CO2,ABC,K-TYPE)
Refilling and servicing of ABC Type (Mono Ammonium
Phosphate 50%) Fire Extinguisher with a capacity of 6 KG,
including complete discharge, internal cleaning, refilling with
fresh MAP 50% powder, cartridge checking, and overall
inspection as per safety standards.(approve rate at amc met-
Refilling and servicing of CO₂ Type Fire Extinguisher with a
capacity of 4.5 KG, including safe discharge of residual gas,
286 1.00 internal inspection, valve servicing, and refilling with Nos 758.93
certified CO2 gas as per safety norms..(approve rate at amc
Complete refilling and servicing of K-Type Wet Chemical Fire
Extinguisher with a capacity of 6 Litres, specially designed for
kitchen and cooking oil fire hazards. Including safe discharge,
287 1.00 internal cleaning, refilling with approved wet chemical Nos 4800.00
solution, and valve assembly servicing as per safety
compliance standards..(approve rate at amc met-piu)
Providing and fixing, testing and commissioning of Dry
Chemical Powder (ABC) Store Pressure type 6 kg confirm to
288 1.00 IS: 15683, with ISI marked / TAC approved fitted with Nos 2495.00
required accessories including wall suspension
brackets.(approve rate at amc met-piu ARC Tender)
Providing and fixing, testing and commissioning of Carbon
Dioxide (Co2) type Fire Extinguisher of 4.5 kg confirm to
289 1.00 IS:15683, with ISI marked/TAC approved fitted with required Nos 4710.00
accessories including wall suspension brackets.(approve rate
at amc met-piu ARC Tender)
FURNITURE ITEAM
Meeting Room Conference Table.(approve rate at L.G &SCL
Executive Hydraulic Revolving Chair with foam rubber
Handel,directed by Engg. in Charge.(approve rate at L.G
&SCL HOSPITAL )
Medium Back Revolving Chairs with foam rubber
Handel,directed by Engg. in Charge..(approve rate at L.G
&SCL HOSPITAL )
Medium Back Revolving Chairs with foam rubber
Handel,directed by Engg. in Charge..(approve rate at L.G
&SCL HOSPITAL )
Box Type Sofa Two Seater Foam Rexin/Tepestri
Cusion,directed by Engg. in Charge..(approve rate at L.G
&SCL HOSPITAL )
Box Type Sofa Three Seater Foam Rexin/Tepestri
Cusion,directed by Engg. in Charge..(approve rate at L.G
&SCL HOSPITAL )
Round Tripod,directed by Engg. in Charge..(approve rate at
L.G &SCL HOSPITAL )
Side Tripod (Size: 18" x 12" x 15") Laminated,directed by
297 1.00 Engg. in Charge.(approve rate at L.G &SCL HOSPITAL ) Nos 1450.00
Office Chair with foam on seat-back side,directed by Engg. in
298 1.00 Charge.(approve rate at L.G &SCL HOSPITAL ) Nos 5800.00
Students Chair with writing pad,directed by Engg. in
299 1.00 Charge.(approve rate at L.G &SCL HOSPITAL ) Nos 3500.00
Stool for Peon with laminated Top (Size: 13" x 13" x
300 1.00 21"),directed by Engg. in Charge..(approve rate at L.G &SCL Nos 2160.00
Waiting Area's Chairs in Set of 3 Nos,directed by Engg. in
301 1.00 Charge.(approve rate at L.G &SCL HOSPITAL ) Nos 7200.00
Executive Table Laminated Top Drawer Cabinate with Side
Cabinet(Special Shapes as per Requirement),directed by
302 1.00 Engg. in Charge.(approve rate at L.G &SCL HOSPITAL ) Nos
B-Table with top laminate and with Top two cabinate and
apron,directed by Engg. in Charge. (Size:4'X2'X2.5')
Computer Table with Key Board Drawer & Cabinet (Size: 4' x
2' x 2.5"),directed by Engg. in Charge .(approve rate at L.G
304 1.00 &SCL HOSPITAL ) Nos
E-Table Laminated Top with one Cabinet (Size: 3' x 2' x
305 1.00 2.5),directed by Engg. in Charge.(approve rate at L.G &SCL Nos 7000.00
Podium For Teacher's In Teaching Room,directed by Engg. in
306 1.00 Charge.(approve rate at L.G &SCL HOSPITAL ) Nos 7140.00
Steel Trainee Locker with 12 Nos. (Approx. Size 78" x 36" x
18"),directed by Engg. in Charge.(approve rate at L.G &SCL
Big Steel Reck with 6 Partition (Size: 6.25' x 3' x
308 1.00 1.25),directed by Engg. in Charge.(approve rate at L.G &SCL Nos 6800.00
20 Gauge Steel Store Cupboard with Two Partition,directed
by Engg. in Charge. (Approx. Size 50" x30"X17")
20 Gauge Steel Store Cupboard with Glass door and Four
Partition (Approx. Size 78" x36"X18"),directed by Engg. in
310 1.00 Charge..(approve rate at L.G &SCL HOSPITAL ) Nos
Notice Board with Glass Shutter (Size: 3.5' x 2" x 3"),directed
311 1.00 by Engg. in Charge.(approve rate at L.G &SCL HOSPITAL ) Nos 4450.00
Simple Soft Board with Cloth,directed by Engg. in
312 1.00 Charge.(approve rate at L.G &SCL HOSPITAL ) Sq.ft 254.00
The Rates are Exclusive of GST. Prevailing GST will be paid separately.
Contractor’s Quoted Rate
IN FIGURE IN WORDS
Net Quoted Tender Amount Rs.
Seal and Signature of the Bidder Additional City Engineer
mobile no. (amc met/Hospital)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
volume 1 technical bid.pdf
volume 2 price bid.pdf
Download all tender documents and submit your bid