Annual Rate For Reparing And Renovation of Various Government Residential OR Non Residential Building Under R & B Division, Himatnagar, Ta. - Himatnagar Dist. - Sabarkantha

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

1 Excavation for foundation up to 1.5mt. Depth 1.00 122.99 Cmt.

including sorting out and stacking of useful

materials and disposing of the excavated stuff

up to 50 meter lead.(A) Loose or soft soil

2 Excavation for foundation up to 1.5mt. Depth 1.00 157.08 Cmt.

including sorting out and stacking of useful

materials and disposing of the excavated stuff

up to 50 meter lead.(B) Dense or hard soil

3 Excavation for foundation up to 1.5mt. To 3.0 1.00 136.33 Cmt.

mt. depth including sorting out and stacking of

useful materials and disposing of the

excavated stuff up to 50 meter lead.(A) Loose

or soft soil

4 Excavation for foundation up to 1.5mt. To 3.0 1.00 170.40 Cmt.

mt. depth including sorting out and stacking of

useful materials and disposing of the

excavated stuff up to 50 meter lead.(B) Dense

or hard soil

5 Filling available excavated earth (Excluding 1.00 136.92 Cmt

rock) in trenches plinth, sedes of foundation

etc in layers not exceeding 20 cm in depth

consolidating each deposited layer by

ramming and watering.

6 Filling foundation and plinth with murrum or 1.00 294.39 Cmt

including watering, ramming and

consolidation etc. complete.

7 Filling in plinth with sand under floors 1.00 481.81 Cmt

including watering, ramming consolidating

and dressing etc. complete.

8 Demolition including stacking of serviceable 1.00 1081.84 Cmt.

materials & dispose of unseviceable materials

with all lead and lift. 1 R.C.C. work

9 Dismantling doors, windows, ventilators etc. 1.00 191.85 Each.

(wood or steel) shutters including chowkhats,

architraves, holdfasts and other attachment

etc. complete & stacking them within all lead

& lift[I] Not excceding 3 Sqmt. In area.

10 Dismantling sanitary fittings lime washbasin, 1.00 413.50 Each.

W.C. pan Indian and European type, flushing

tank etc. including stacking the materials with

all lead & lift.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

11 Dismentling wood work, wrought framed and 1.00 1797.80 Cu.m

fixed in frames trusses including stacking the

materials with all lead and lift.

12 Demolition of Brick work and stone masonry 1.00 562.85 Cu.m

including stacking of serviceable materilas

and disposal of unserviceable materials with

all lead and lift.(ii) In Cement Mortar.

13 Dismentaling tiled of stone floors laid in 1.00 49.18 Cum.

mortar including stacking of serviceable

materilas and disposal of unserviceable

materials with all lead and lift.

14 (i) Providing and laying cement concrete 1.00 299.95 Smt.

flooring 1:2:4 ( 1 cement 2 coarse sand 4:

graded stone aggregate 20 m.m. nominal size

) laid in one layer finished with a floating coat

of neat cement.(A) 40mm. thick

15 Providing and laying cement concrete 1.00 4521.16 Smt

pavement with 1:2:4 ( 1 cement 2 coarse

sand : 4 graded stone aggregate 20 mm.

nominal size ) including finishing with a

floating coat of neat cement of any thickness.

16 Providing and laying cement concrete 1:2:4 1.00 3757.62 Cmt.

( 1 cement: 2 coarse sand : 4 graded stone

aggregate 20 m.m. nominal size ) and curing

complete excluding cost of form work in:( a )

Foundation and Plinth.

17 Providing and laying cement concrete 1:2:4 1.00 3757.62 Cmt.

( 1 cement: 2 coarse sand : 4 graded stone

aggregate 20 m.m. nominal size ) and curing

complete excluding cost of form work in:( b )

Independenct piers, columns and pillars up to

floor two level.

18 Providing and laying cement concrete work 1.00 4046.43 Cmt.

1:2:4 (1- Cement : 2- Coarse sand : 4- graded

stone aggregates 20 mm nominal size) and

curing complete excluding cost of formwork

and reinforcement for reinforced concrete

work in (A) Foundations, footings, Base or

columns and Mass concrete

19 Providing and laying cement concrete 1:3:6 (1- 1.00 3095.25 Cmt.

Cement : 3- coarse sand : 6- hand broken

stone aggregates 40 mmnominal size) and

curing complete excluding cost of formwork in

(A) Foundation and Plinth

20 Providing and laying cement concrete 1:2:4 1.00 3975.78 Cmt

for curing complete excluding cost of

formwork and reinforcement for reinforced

concrete work in (A) Foundations,

footings,Base of columns and Mass concrete

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

21 Providing and laying cement concrete 1:1.5:3 1.00 4441.40 Cmt

and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (C) Slabs, landing, shelves,

Balconies Lintels, Beams, Girders and

Cantilever upto floor two level.

22 Providing and laying cement concrete 1:1.5:3 1.00 4540.22 Cmt

and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (D) Columns, Pillars posts

and struts upto floor two level.

23 Providing and laying cement concrete 1:1:2 1.00 4577.29 Cmt

and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (C) Slabs, landing, shelves,

Balconies, Lintels, Beams, Girders and

Cantilever upto floor two level.

24 Providing TMT Bar FE 500D reinforcement for 1.00 77.29 Kg.

R.C.C. work including bending, binding and

placing in position complete upto floor two

25 (i)Brick work using common Brunt clay 1.00 4491.76 Cmt.

building brick having crushing strength not

less than 35 kg./ Sq. c.m. in foundation and

plinth. (b) Conventional(A) In cement mortar

1:6 (1 cement : 6 fine sand )

26 (i)Brick work using common Brunt clay 1.00 4773.42 Cmt.

building brick having crushing strength not

less than 35 kg./ Sq. c.m. in superstructure

above plinth level upto floor two level. (b)

Conventional(A) In cement mortar 1:6 (1

cement : 6 fine sand )

27 (i) Half brick masonary in common brunt clay 1.00 629.84 Sqmt.

building brick having crushing strength not

less than 35 kg. / Sq.cm. in foundation and

plinth.(b) Conventional(A) In cement mortar

1:4 ( 1 cement : 4 coarse sand )

28 (i) Half brick masonary in common brunt clay 1.00 672.27 Sqmt.

building brick having crushing strength not

less than 35 kg. / Sq.cm. in superstructure

above plinth level upto floor two level. (b)

Conventional(A) In cement mortar 1:4 (

cement : 4 coarse sand )

29 Providing and fixing 19cm x 19cm x 8cm of 1.00 5252.00 Sqmt.

glass brick of approved shade and design

fixed with white cement and 2 Nos. of 6mm

alluminium bar at every layer fixed with white

cement in line and level etc complete for all

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

30 Providing wood work in frames of Doors, 1.00 610.24 10

Windows clearestory windows and other Cu.D

similar works, Framed and fixed in m.

position.(A) Indian Teak wood

31 Providing and fixing 35 m.m. thick shutters for 1.00 3752.42 Sqmt.

doors, windows and clearstory windows

including black enamelled M.S. butt hinges

with necessary screws.(A) Indian Teak wood

(iii) Partly panelled & Partly glazed.

32 Providing and fixing flush door shutter.solid 1.00 1829.74 Sqmt.

core construction with frame of first class hard-

wood with cross band face veneer or play

wood face panels, including anodised

alluminium butt hinges with necessary screws.

(B) Non-decorative type and black board cord

anodised alluminium butt hinges in flush door

shutters. 35mm. thick

33 Providing & fixing 35 m.m. thick shutter for 1.00 4989.66 Sqmt.

doors, windows and clearstory windows

including Indian teak-wood with teak-wood

frame 10 cm. X 7 cm. size including anodized

alluminium fixtures & fastenings including

primer cost of approved quality and two coats

oil paints etc. complete.(iii) Partly panelled &

Partly glazed.

34 Providing and fixing 25 m.m. thick shutters for 1.00 2958.08 Sqmt.

cupboards including black enamelled M.S.

butt hinges with necessary screws.(A) Indian

Teak wood(iii) Partly panelled & Partly glazed.

35 Providing and fixing 30 m.m. wire gauge 1.00 1270.12 Sqmt.

shutters using galvinised M.S. wire of I.S.

gauge designation 85-G with wire of

m.m.dia for doors, windows and clearstory

windows including bright finished or / and

black enamelled M. S. butt hinges with

necessary screws Mango Wood or equivalent

36 25 m.m. thick wooden shelves supported on 1.00 1338.98 Sqmt.

40 X 40 X 6 m.m. T or L iron brackets fixed at

suitable distance but not exceeding 75 cm.

apart with mango wood or equivalent quality.

37 Providing and fixing sheet glass ordinary 1.00 1167.33 Smt.

quality bedded in putty and fixed with wooden

beading including of first class teakwood and

necessary cutting of glass.(ii) 4mm. Thick

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

38 Providing & fixing M.S. grills of required 1.00 106.30 Kg

pattern to wooden frames of windows etc.

with M.S. flats at required spacing and frame

allround square or round bar with round

headed boltes nuts or by screws. (A) Plain

39 Providing & fixing M.S. grills of required 1.00 162.96 Kg

pattern to wooden frames of windows etc.

with M.S. flats at required spacing and frame

allround square or round bar with round

headed boltes nuts or by screws. (B)

ORNAMENTAL GRILL

40 P & L 24" x 24" vitrified 8 mm thick tile flooring 1.00 1467.73 Smt.

over 20 mm (average) base of cement mortar

1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by

adhesive material including dismentaling of

existing flooring and jointed with color cement

slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit

41 Providing & Laying 800 mm X 1200 mm 1.00 1717.00 Smt.

Glazed Vitrified Tiles 8 mm thick tile flooring

over 20 mm (average) base of cement mortar

1:6 ( 1 cement: 6 coarse sand) on new

surface jointed with color cement slurry

including finised with flush pointing and

applying Epoxy in Grouts & cleaning the

surface etc. as directed by engineer in

42 Providing and laying glazed tiles size as 1.00 950.54 Smt.

directedin flooring treads of steps and

landings laid on a Bed of 12 m.m. thick

cement mortar 1:3 ( 1 cement : 3 coarse sand

) finished with flush pointing in white cement.

43 Providing and laying glazed tiles size as 1.00 982.04 Smt.

directed in skirting riser of steps and dedo on

10 m.m. thick cement plaster 1:3 ( 1 cement :

3 coarse sand ) pointing in white ceand

jointed with white cement slurry.

44 Providing and laying color Ceramic tiles 6mm 1.00 1090.32 Smt

thick in skirting and DEDO on 10mm thick

cement plaster 1:3 (1- cement : 3 sand)

pointing in white cement with matching

45 Providing and laying vitrified flooring tiles 8 1.00 1592.40 Smt

mm thick in SKIRTING and risers of steps

and dedo on 10 mm thick cement mortar 1:3

(1 cement : 3 Coarse sand) and jointed with

white cement.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

46 Providing and laying marble stone slab 1.00 2235.26 Smt

flooring over 20mm (average)base of cement

mortar 1:6 (1-cement : 6 coarse sand) or L.M.

1:1.5(1- lime putty : 1.5 - coarse sand) laid

and jointed with gray cement slurry including

rubbing and polishing complete. (A) Marble

slab 25mm thick

47 Providing and fixing 60x60 Cm Granite 1.00 1212.00 Smt.

Vitrified Tiles (GVT) Colour/ Wooden Shed

10 mm thick vitrified tiles flooring over 20 mm

average base of cement mortar 1:6 (

Cement : 6 Sand ) with groove and filled the

same with grout material of approved quality

including finishing cleaning the surface etc

as directed by Engineer in charge.

48 P & L Ceramics flooring tiles 6mm thick in 1.00 994.37 Smt.

flooring treads of steps and landings laid on a

bed of 12 mm thick cement mortar 1:3 (1

cement : 3 coarse sand) finished with flush

pointing in white cement

49 P & L 400 X 800 or 800 x 800 marbo 1.00 2626.00 Smt.

brand { kazaria} flooring over 20 mm

(average) base of cement mortar

50 Providing and laying Black or Colour Machine 1.00 2424.00 Smt.

Cut free edges, Machine polished Granite

Stone slab 18 mm thick single piece For

Stair,Steps,landing,Skirting etc as per design

including fully moulded round front edge and

1cm nosing and necessary groove on trade of

steps laid on 20 mm thick cement mortar 1:6

(1-cement : 6 coarse sand) jointed with grey

cement slurry including rubbing,polishing &

Finishing etc. complete as directed by

Enginner in Charge.

51 Constructing a sandwich type plateform 75 1.00 5555.00 Smt.

cm width and 70 cm height resting on

polished Kotah stones and top of the

plateform shall be of Black granite and the

front patti shall be 10 cms wide Moulded black

granite as per the instruction of Engineer - in -

charge.(AS Per App.Rate of SP Office

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

52 Providing and laying 18 mm thick single side 1.00 2929.00 Smt.

mirror finish machine cut ,free edges

,machine polished granite in sills and Jams of

Doors and windows in single piece both

edges moulded in half round shape as per the

instruction of Engineer - in - charge.

53 P & L 24" x 24" vitrified 8 mm thick tile flooring 1.00 1311.19 Smt.

over 20 mm (average) base of cement mortar

1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by

adhesive material including dismentaling of

existing flooring and jointed with color cement

slurry including finised with flush pointing &

cleaning the surface etc. complete for light

54 Providing and fixing pre-cast Rubber Dye / 1.00 706.93 Smt.

steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-

2018 etc. Complete.

55 Providing and laying broken chine mosaic 1.00 779.70 Smt.

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto

surface using white cement including rounding

off junctions and extending them upto 15 cm

along the wall,clearing with water and oxalic

acid etc. as directed.

56 Providing and fixing pre-cast concrete kerb 1.00 404.06 Rmt

stone of gray cement based concrete block

30cm length, 30cm height and 15cm thick of

M200 grade concret as per approved design

and including excavation for fixing in proper line

and level, filling the joint with C:M 1:3 (1 cement

: 3 fine sand) etc complete.

57 Providing and Laying Machine cut , Machine 1.00 2626.00 Smt.

polished 7.5 cm wide Blue Granite strip flooring

laid on 20 mm thick cement mortar 1:6 (

Cement :6 Sand ) on Ramp for basement with

length of Granite strip minimum 2.50 Mt , jointed

with grey cement slurry with pigment including

rubbing polising, finishing etc complete as

directed by Engineer in charge.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

58 Provding & Laying Granito vitrified tiles 60 X 60 1.00 1212.00 Smt.

Cm (GVT) Matt finshed tiles in flooring treads of

steps and landing laid over 20 mm (average)

thick base of cement mortar 1:6 (1- Cment :6

Coarse sand ) laid over and jointed with white

cement slurry including finishing with flush

pointing and cleaning the surface etc complete.

(In all corridor & Toilet general space)

59 Providing and laying Kota-stone slab flooring 1.00 1019.00 Smt.

over 20 m.m. ( average thick base of cement

mortar ) 1:6 ( 1 cement : 6 coarse sand ) or L.M.

1:1.5 laid over and jointed with grey cement

slurry including rubbing and polishing complate.

(A) 25mm. thick

60 Providing and laying polished kota stone slab 1.00 1166.94 Smt.

25mm thick in risers of steps,skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray

cement slury mixed with pigment to match the

shade of slab including rubbing and polishing

etc. complete.

61 Providing 15 mm.thick cement plaster in single 1.00 184.78 Sqmt.

coat on fair side Brick / concrete walls for

interior plastering upto floor two level and

finished even and smooth in : [I] Cement mortar

1 : 3 ( 1cement : 3 sand ) with a floating coat of

neat cement slurry.

62 Providing 20 mm.thick cement plaster in single 1.00 235.49 Sqmt.

coat on rough side brick of single or half walls

for interior plastering upto floor two level and

finished even and smooth in : [I] Cement mortar

1 : 3 ( 1cement : 3 sand ) with a floating coat of

neat cement slurry.

63 20 mm. Thick sand face cement plastering on 1.00 321.10 Sqmt.

walls upto height 10 meters above ground level

consisting of 12 mm. thick backing coat of c. m.

1 : 3 ( 1 cement : 3 sand ) and 8 mm. thick

finishing coat of c. m. 1 : 1 ( 1cement : 1 sand )

etc complete.

64 Providing & fixing 1.2 meter high fencing with 1.00 391.94 Rmt.

2.0 meter long M.S. angle posts 40mm X 6mm

X & oil painting three coats, fixed at 2.5 meter

C/C with five horizontal lines & two diagonals of

galvanised steel barbed wire weighing 9.38 kg.

per 100 meter, strained & fixed to posts in

ground with 0.5 mt X 0.5 mt X 0.5 mt block in

C.C. 1:5:10 etc. complete.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

65 Providing & fixing to wall, ceiling & floor 1.00 252.49 Rmt.

galvanised mild steel tubes (Medium grade) of

the following nominal bore, tube fittings and

clamps including making good the wall, ceiling

and floor.[A] 15 mm.

66 Providing & fixing to wall, ceiling & floor 1.00 304.00 Rmt.

galvanised mild steel tubes (Medium grade) of

the following nominal bore, tube fittings and

clamps including making good the wall, ceiling

and floor.[B] 20 mm.

67 Providing & fixing to wall, ceiling & floor 1.00 401.95 Rmt.

galvanised mild steel tubes (Medium grade) of

the following nominal bore, tube fittings and

clamps including making good the wall, ceiling

and floor.[C] 25 mm.

68 Providing & fixing to wall, ceiling & floor 1.00 500.98 Rmt.

galvanised mild steel tubes (Medium grade) of

the following nominal bore, tube fittings and

clamps including making good the wall, ceiling

and floor.[D] 32 mm.

69 Providing & fixing to wall, ceiling & floor 1.00 608.36 Rmt.

galvanised mild steel tubes (Medium grade) of

the following nominal bore, tube fittings and

clamps including making good the wall, ceiling

and floor.[E] 40 mm.

70 Providing & fixing to wall, ceiling & floor 1.00 794.19 Rmt.

galvanised mild steel tubes (Medium grade) of

the following nominal bore, tube fittings and

clamps including making good the wall, ceiling

and floor.[F] 50 mm.

71 Providing & laying in tranches galvanised mild 1.00 152.96 Rmt.

steel tubes (Medium grade) of the following

nominal bore, tube fittings (Earthwork in

trenches to be measured & paid separately)[A]

72 Providing & laying in tranches galvanised mild 1.00 193.41 Rmt.

steel tubes (Medium grade) of the following

nominal bore, tube fittings (Earthwork in

trenches to be measured & paid

separately)[B] 20 mm.

73 Providing & laying in tranches galvanised mild 1.00 282.99 Rmt.

steel tubes (Medium grade) of the following

nominal bore, tube fittings (Earthwork in

trenches to be measured & paid

separately)[C] 25 mm.

74 Providing & laying in tranches galvanised mild 1.00 426.41 Rmt.

steel tubes (Medium grade) of the following

nominal bore, tube fittings (Earthwork in

trenches to be measured & paid

separately)[D] 40 mm.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

75 Providing & laying in tranches galvanised mild 1.00 725.71 Rmt.

steel tubes (Medium grade) of the following

nominal bore, tube fittings (Earthwork in

trenches to be measured & paid

separately)[E] 65 mm.

76 Providing & laying in tranches galvanised mild 1.00 921.68 Rmt.

steel tubes (Medium grade) of the following

nominal bore, tube fittings (Earthwork in

trenches to be measured & paid

separately)[F] 80 mm.

77 Providing & fixing to wall ceiling and floor 6.0 1.00 280.24 Rmt.

kg. F/Sqcm. Working pressure polyethylene

pipes of the following outsides diameter, low

density, complete with special flange

compression type fitting, wall clips etc.

including making good the wall ceiling and

floor.[F] 75 mm.

78 Providing & fixing to wall ceiling and floor 6.0 1.00 339.05 Rmt.

kg. F/Sqcm. Working pressure polyethylene

pipes of the following outsides diameter, low

density, complete with special flange

compression type fitting, wall clips etc.

including making good the wall ceiling and

floor.[G] 110 mm.

79 Providing & fixing cast iron spigot & socket 1.00 741.01 Rmt.

soil, waste and ventilating pipes of the

following nominal size.[I] 75 mm. diameter

80 Providing & fixing cast iron (spun) Nahni trap 1.00 634.17 Each.

of the following nominal diameter of self

cleansing design with C.I. scread down

higned grating including cost of cutting &

making good the walls and floors 100 mm.

inlet & 50 mm. outlet.

81 Providing & fixing storage unit of spacewood, 1.00 8282.00 Smt.

hermanmiller or steel case consist of 18 mm

particle board with hinge door fitted with haffle

hinges or sliding on nylon roller including

locking arrangement.& including stainless

steel Basket for fixing of Kitchen set as per

the requirement for platform etc. complete as

directed by Engineer-in-charge.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

82 Providing & fixing Back side storage unit of 1.00 2727.00 Smt.

spacewood, hermanmiller or steel case

consist of 18 mm particle board with hinge

door fitted with haffle hinges or sliding on

nylon roller including locking arrangement

having 20 mm thick both side polished kotah

stone fixed in walls (5 Nos. of shelves )with

making grooves and having front edge with

full moulding etc. complete as directed by

Engineer-in-charge.

83 Providing and fixing alluminium colour 1.00 3030.00 Smt.

anodised partly paneled partly glazed partition

wall upto lintel level with partly paneled partly

glazed single shutter door using main frame

of JINDAL section No 4656 size 101.6 mm x

44.75 mm x 1.60 mm having weight of

kg/m, vertical & horizontal intermediate

member of JINDAL section No 4655 size

101.60 mm x 44.75 mm x 1.50 mm having

weight 1.301 kg/m, shutter frame towards

hinges of JINDAL section No 4505 of size

47.62 mm x 44.45 mm x 2.82 mm having

weight of 1.293 kg/m, shutter frame away

from hinges of JINDAL section No 4504 of

size 47.62 mm x 44.45 mm x 2.82 mm having

weight of 1.357 kg/m, glazing clip of JINDAL

section No 4420 of size 19 mm x 17.30 mm

having weight of 0.124 kg/m,

Novapan/Glass/ partly glass & novapan

excluding door including necessary hinges, &

door closer etc. complete

84 Providing and fixing steel cupboard having 1.00 3636.00 Smt.

frame of 40 mm x 40 mm x 5 mm M.S. angle

double door shutter of CRS plate of 18 gauge

(1.219 mm thickness) with 30 mm x 3 mm x

3mm angle framing at top and bottom edge of

shutter 10 mm x 10 mm square M.S. bars

Nos. vertical and 40 mm x 3 mm M.S. flat at

one edge of each shutter and for lock along

with one coat of red oxide and two coats of

spray oil painting of approved brand and

colour shed and locking arrangement etc.

complete as directed by Engineer-in-charge.

85 Providing and fixing Door closer including 1.00 1414.00 Nos

screws & Required Materias etc. complete as

directed by Engineer-in-charge.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

86 Providing and fixing PVC plain colour false 1.00 808.00 Smt.

celling with gride type with alu. Frame

consisting of 600mm x 600mm 3mm thick

plain PVC sheet used as panel insert in a

frame work made using anodized alluminium "

T " section of size 1'' x1'' ( 25 x 25 mm .19

guage of 1 mm thick ) in square pattern of

gride size of 2'' x 2" ( 600 x 600 mm ) The

alluminium frame work is supported from the

celling with the help of G.I. hook and G.I. wire

6mm M.S.road of required sizes to maintain

properlevel etc. The alluminium frame work is

supported on wall with the use of alluminium

"L" section of size 1"x 1" ( 25 x 25 mm ) angle

etc. Complete as per direction of Engineer-in-

charge manufacturer's specification and

87 Providing and fixing G.F.C false Ceiling with 1.00 1313.00 Smt.

using M.S. "E" channel, wall angle, and

bottom channel in framing with 12.0mm thick

Gypsum board in ceiling with India Gypsum

cotch bolts and all the sections of India

Gypsum with necessary fixtures and

fasetening including copper wiring as per

requirement in ceiling and double mirror optic

fixture with 2 CFL tubes/LED Lamps at

sqmt each etc complete or as directed.

88 28 MM THICK FRP DEPRESSED PANEL 1.00 1560.33 Smt.

DOOR SHUTTER:

Providing & Fixing of 28mm thick FRP shutter

with 1.5 to 2.0 mm thick fire retardent grade

FRP skin in depressed panel design having

extra reinforcement on sides and edges and

in Gel coat finish. The core of the shutter is to

be filled up with injected fire retardent grade

polyurethane foam done in situ along with

embedded wooden pieces for stiffening and

also for taking hinges and fixtures. The whole

shutter is to be waterproof, weatherproof,

termite proof and resistance to mild acid /

Alkali. Rates are to be inclusive of S.S. hinges

with necessary screws and alluminium fixtures

and fastening with fastner & sleeve. Product

should have 3 year performance guarantee

and company having ISO 9001-2000

certificate. (Proposed For Toilet)

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

89 35 MM THICK FRP DOOR SHUTTER WITH 1.00 1269.64 Smt.

WOOD GRAIN RAISED PANEL:

Providing & Fixing of 35mm thick fiber glass

shutter with 1.5 to 2.0 mm thick fire retardent

grade FRP skin in wood grain raised panel

design having extra reinforcement on sides

and edges and in Gel coat finish. The core of

the shutter is to be filled up with injected fire

retardent grade polyurethane foam done in

situ along with embedded wooden pieces for

stiffening and also for taking hinges and

fixtures. The whole shutter is to be

waterproof, weatherproof, termite proof and

resistance to mild acid / Alkali. Rates are to

be inclusive of S.S. hinges with necessary

screws and alluminium fixtures and fastening.

Product should have 3 year performance

guarantee and company have ISO 9001-2000

certificate.

(Proposed For Office & Resident)

90 35 MM THICK FRP DOOR SHUTTER WITH 1.00 986.39 Smt.

WOOD GRAIN RAISED PANEL IN POLISH

DESIGN FINISH (SIMILAR TO POLISH

Providing & Fixing of 35 mm thick FRP shutter

with 1.5 to 2.0 mm thick fire retardent grade

FRP skin in wood grain raised panel design

having extra reinforcement on sides and

edges and in Polish design finish. The core of

the shutter is to be filled up with injected fire

retardent grade polyurethane foam done in

situ along with embedded wooden pieces for

stiffening and also for taking hinges and

fixtures. The whole shutter is to be

waterproof, weatherproof, termite proof and

resistance to mild acid / Alkali. Rates are to

be inclusive of S.S. hinges with necessary

screws and alluminium S.S. finish fixtures &

fastening. Product should have 3 year

performance guarantee and company having

ISO 9001-2000 certificate.

(Proposed for VIP)

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

91 125 X 65 MM FRP FRAME WITH 35 MM 1.00 2019.98 Smt.

THICK FRP WOOD GRAIN RAISED PANEL

Providing and fixing FRP FRAME size 125 x

65 mm & 35 mm thick FRP shutter with wood

grain raised pannel design finish shutter

having extra reinfocement on sides and edges

in Gel coat finish. The core of the shutter and

frame is to be filled up with injected

plyurethane foam done in situ along with

embedded wooden pices for stiffening & also

for taking hinges and fixtures. The whole FRP

frame and shutter is to be water proof,

weather proof, termite proof and resistance to

mild acid/alkalis. Rates are to be inclusive of

S.S. hinges with fastener sleeve and

alluminium fixtures and fastening. Product

should have 3 years perfomance guarantee &

company have 9001-2000 certificate.

(For Office & Resident Purpose)

92 100 X 50 MM FRP FRAME WITH 28 MM 1.00 2377.77 Smt.

THICK FRP DEPRESSED PANEL

Providing and fixing FRP FRAME size 100 x

50 mm & 28 mm thick FRP depress pannel

shutter having extra reinfocement on sides

and edges in Gel coat finish. The core of the

shutter & frame is to be filled up with injected

fire retardant grade plyurethane foam done in

situ along with embedded wooden pices for

stiffening & also for taking hinges and fixtures.

The whole FRP frame and shutter is to be

water proof, weather proof, termite proof and

resistance to mild acid/alkalis Rates are to be

inclusive of S.S. hinges with necessary

screws and alluminium fixtures and fastening

with fastener & sleeve. Product should have

years perfomance guarantee & company

have 9001-2000 certificate.

(For Toilet Purpose)

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

93 125 X 65 MM FRP FRAME WITH 35 MM 1.00 2615.05 Smt.

THICK FRP WOOD GRAIN RAISED PANEL

SHUTTER IN POLISH FINISH:

Providing and fixing FRP FRAME size 125 x

65 mm & 35 mm thick FRP shutter having

extra reinforcement on sides & edges in

polish finish. The core of the shutter is to be

filled up with injected fire retardant grade

polyurethane foam done in situ along with

embedded wooden pices for stiffening & also

for taking hinges and fixtures. The whole FRP

frame and shutter is to be water proof,

weather proof, termite proof and resistance to

mild acid/alkalis. Rates are to be inclusive of

S.S. hinges with necessary screws and

alluminium S.S. fixtures and fastening with

fastener & sleeve. Product should have

years perfomance guarantee & company

have 9001-2000 certificate.

(For VIP Room & Rest House Purpose)

94 STORE WELL :- Supplying and Placing in 1.00 23230.00 Nos.

Position Godrej make store well. This shall

have an overall size of 916 mm(W) x

mm(D) x 1980 mm(H) with construction. It

should have the shelf thickness of 0.7 mm,

Back thickness of 0.8mm, Door thickness of

0.8mm (high yield strength) and all other

components shall have a thickness of 0.9mm.

These components shall be made of CRCA

‘D’ grade high yield strength as per IS:513.

The Store well should have a Mazak handle

and Three way locking mechanism with

Shooting Bolts. It should have a height wise

adjustable shelf mounting which shall have a

Uniformly Distributed Load Capacity of max

40 Kg. It should also have a M10 Screw type

Leveller with Hex plastic base. The finishing

shall include Epoxy powder coated to the

thickness of 50 microns (+/- 10). The quoting

price should be inclusive of all types of taxes

& duties ,packing, forwarding, loading,

unloading, installaion. Supply strictly as per

make and technical specification. {Godrej} As

per the direction of the Architect / Engineer In

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

95 WOODEN FLOORING (DOMESTIC) 1.00 1212.00 Sq.Mt

Providing and laying 8 mm thick LAMINATE

WOODEN FLOORING OF PERGO

ORIGINAL (matt finish) consisting of panels

of size 1194 mm x 194 mm having class use -

23/33, wear resistance level of AC05 as per

with a high pressure laminate surface treated

with aluminium oxide and specially patented

SURFACE GUARD + on top of high density

fiber board with a density of 910 kg/cum. The

panels having a click system tongue and

groove joint to secure a long lasting joint with

the edges duly impregnated with paraffin. The

floating laminate flooring shall be laid over a

0.20 mm thcik polythene film to form a vapour

barrier and 2 mm to 3 mm thick PERGO

FOAM under layer to reduce impact sound

etc. The quoting price should be inclusive of

all types of taxes & duties ,packing,

forwarding, loading, unloading, installaion.

Supplied strictly as per our technical

specifications and make. As per the direction

of the Architect / Engineer In charge.

96 VSDU :- Providing & Supplying Godrej make 1.00 20200.00 Nos.

Books Storage Sliding Door Cub Board

(VSDU) having Size-1830mm Height X

900mm Width X 450mm Depth. Rigid knock

down construction. Back side and door are

made from 0.7 mm high yield strength CRCA,

rest in 0.8 mm CRCA. Sliding door

arrangement with top hanging arrangement to

prevent derailment. Each door provided with

plastic roller having steel ball bearing for

smooth movement of door less noise. 5 lever

cum lock height wise adjustable self mounting

, UDL capacity is 40 kg max. Finish with

epoxy polyester powder coated thick

microns. Screw type leveller with hex plastic

base, metal top. Number of shelves in each

compartment - 4 Nos. The quoting price

should be inclusive of all types of taxes &

duties ,packing, forwarding, loading,

unloading, installaion. Supplied strictly as per

our technical specifications and make.

{Godrej} As per the direction of the Architect /

Engineer In charge.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

97 CORNER TABLE :- Providing, Supply & 1.00 12120.00 Nos.

Placing corner table and placing in position .

The size of table shall be 550mm (W) x

550mm (D) x 510mm (H). The table is made

of Glass top with SS understructure. 10 mm

tampered glass top, 8 mm tampered bottom

glass for storage option. Chrome plated

understructure, Passed 48 hours salt spray

test. Glass attached to the understructure via

UV disc, Load bearing capacity : 20 Kg.

Godrej Make :- Model.No.HELIX. The quoting

price should be inclusive of all types of taxes

& duties ,packing, forwarding, loading,

unloading, installaion. Supplied strictly as per

our technical specifications and make.

{Godrej} As per the direction of the Architect /

Engineer In charge.

98 CENTRE TABLE :- Providing,supplying and 1.00 14140.00 Nos.

placing in position Center Table. The size of

table shall be 1100mm (W) x 600mm (D) x

460mm (H). The table is made of Glass top

with SS understructure. 12 mm tampered

glass top & 8 mm tampered bottom glass for

storage option. Chrome plated understructure,

Passed 48 hours salt spray test. Glass

attached to the understructure via UV disc l

Load bearing capacity : 30Kg. Godrej Make :-

Model.No.HELIX. The quoting price should

be inclusive of all types of taxes & duties

,packing, forwarding, loading, unloading,

installaion. Supplied strictly as per our

technical specifications and make. {Godrej}

As per the direction of the Architect / Engineer

In charge.

99 GARBAGE BIN :- Providing and supplying SS 1.00 606.00 Nos.

perforated dustbin made with SS 304 Grade

sheet which has very good material strength,

and it is also Sturdy and Light weight, with

volumemetric capacity Ranging from 7 to

Kg , without paddle and without lid. Easy to

clean , corrosion free and also matt finished

buffing process. The quoting price should be

inclusive of all types of taxes & duties

,packing, forwarding, loading, unloading,

installaion. Supplied strictly as per our

technical specifications and make. {Godrej}

As per the direction of the Architect / Engineer

In charge.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

100 HIGH BACK CHAIR :- Providing and 1.00 13130.00 Nos.

supplying Revolving High Back Chair

(Featherlite Model.No - ERGON) with head

rest .Ergonomic design. Knee tilt synchro

mechanism with multi position locking

arrangement and aluminium die cast arm rest

with polished veneer finishing on top of arm

rest. Specially designed anti topple aluminium

die cast base, class-3 gas lift for seat hight

adjustment & glass filed nylon castors for

smooth movement,45 DC mouled cusion in

seat and back for better comfort. The chair

include pneumatic seat height adjustments.

The sheet and back should be covered with

approved genuine leather and PU leather

finish. The quoting price should be inclusive

of all types of taxes & duties ,packing,

forwarding, loading, unloading, installaion.

Supplied strictly as per our technical

specifications and make. Approved Make :-

Featherlite / HOF / GODREJ .As per choice of

users department and Concern officers in

charge as directed by the Architect/Engineer.

101 MEDIUM BACK CHAIR :- Providing and 1.00 6060.00 Nos.

supplying Revolving medium Back Chair.

(Featherlite Model.No ASTRO) .Knee tilt

synchro mechanism with multi position locking

arrangement and SS finished arm rest with

PU Pad. specially designed anti topple SS

304 grade base, class-3 gas lift for seat hight

adjustment & glass filed nylon castors for

smooth movement,45 DC mouled cusion in

seat and back for better comfort. The chair

include pneumatic seat height adjustments.

The sheet and back should be covered with

approved genuine leather finish. The quoting

price should be inclusive of all types of taxes

& duties ,packing, forwarding, loading,

unloading, installaion. Supplied strictly as per

our technical specifications and make.

Approved Make :- Featherlite / HOF /

GODREJ. As per choice of users department

and Concern officers in charge as directed by

the Architect/Engineer.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

102 VISITOR CHAIR 1.00 4444.00 Nos.

CHAIRS WITHOUT REVOLVING

(VISITOR'S) Providing and supplying low

back chair (without revolving) featherlite

Model No. ASTRO Visitor entire frame

structure made out with 25 MM Dia CRC tube

with 50 Microns Power coated, with

pronged fix base as per sample with

density U-Foam seat and back covered with

good upholstered seat fabric. {The basic rate

of fabric not less then Rs. 600 per Rmt. } etc.

Unless specified sample. The quoting price

should be inclusive of all types of taxes &

duties ,packing, forwarding, loading,

unloading, installaion. Supplied strictly as per

our technical specifications and make.

Approved Make :- Featherlite / Bluebell /

Godrej. As per choice of users department

and Concern officers in charge as directed by

the Architect/Engineer.

103 PUBLIC SEATING :- Providing, supplying & 1.00 6565.00 Nos.

placing of featherlite make 3 seater public

lounge chair, Model.No SJ-708 L , With

armrest , cross beam it should be make of

poweder coated rectangular tube having size

80MM x 40MM x 2MM. Leg and armrest -

these are crome plated made of cold rolled

steel SS 202 grade with 2MM thickness

armrest and leg is assambled to the cross

beam with 2 NOS. M10x100MM bolts. Seat

Back Shell is 1.6MM thick preforated sheet

SS 202 Grade. The side bar is made of

chrome plated solid steel 30 x 12 MM with

fluting and plastic inserts. the Shell is

assambled on the cross beam. Over all Size

1800MM x 680MM x 410 MM. Height 780 MM

x adjustability at foot individual seat with

540MM, Seat height 410 MM, Seat back

angle 105* . The quoting price should be

inclusive of all types of taxes & duties

,packing, forwarding, loading, unloading,

installaion. Supplied strictly as per our

technical specifications and make. Approved

Make :- Featherlite / Bluebell / Godrej. As per

choice of users department and Concern

officers in charge as directed by the

Architect/Engineer.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

104 PLASTIC CHAIR :- Providing & Supplying 1.00 909.00 Nos.

Super delux chairs having size :- 540 mm

(W) x 867 mm (H) x 605 mm (D) with

minimum 4 Kg. weight & along with hand rest

arms made from high quality material. The

quoting price should be inclusive of all types

of taxes & duties ,packing, forwarding,

loading, unloading, installaion. Supplied

strictly as per our technical specifications and

make. Approved Make :- Nilkamal / Cello .

As per choice of users department and

Concern officers in charge as directed by the

Architect/Engineer.

105 LOGO (SATYAMEV JAYATE) 1.00 18180.00 Nos.

Providing & Fixing 6" (Satyamev Jayate)

round logo plate made out of brass with

engraving side circumference and embossing

the logo with buffing matt finish etc. Complete

as per drawing and designs supplied by the

chief architect and existing sample in the main

court and instruction by the high court

authority and engineer in charge.

106 WRITING BOARD :- Providing & Supplying 1.00 3030.00 Nos.

White Board with decorative alluminium

border on white surface with 2-way hanging

options having size of 1600 (L) X 1200 (W)

complete with all necessary fixtures &

accessories. The quoting price should be

inclusive of all types of taxes & duties

,packing, forwarding, loading, unloading,

installaion. (Make :- Title Display / Scholar) As

per choice of users department and Concern

officers in charge as directed by the

Architect/ Engineer.

107 NOTICE BOARD :- Providing & Supplying 1.00 3030.00 Nos.

Notice Board - Soft Board with decorative

alluminium border with 2-way hanging options

having size of 1600 (L) X 1200 (W) with all

necessary fixtures, pins & accessories etc.

The quoting price should be inclusive of all

types of taxes & duties ,packing, forwarding,

loading, unloading, installaion. (Make :- Title

Display / Scholar) As per choice of users

department and Concern officers in charge as

directed by the Architect/Engineer.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

108 NOTICE BOARD WITH GLASS DOOR :- 1.00 4141.00 Nos.

Providing & Supplying Notice Board with

Glass door for display purpose with locking

mechanism, having size of 1600 (L) X

(W) X 100 (D) mm, made up of powder

coated steel structure with glass in door with

locking facility, etc. The quoting price should

be inclusive of all types of taxes & duties

,packing, forwarding, loading, unloading,

installaion. (Make :- Title Display / Scholar) As

per choice of users department and Concern

officers in charge as directed by the

Architect/Engineer.

109 CLOTH CURTAINS 1.00 909.00 Sq.Mt

Providing and fixing cloth curtains of cotton or

semi-cottton fabric with three plated or ring

type curtain pattern .with the basic rate of

fabric not less than 450 Per Mtr. The fabric

with backing cloth {black out} and 25MM OD

1.2MM thickness-304 grade mate finsih SS

rods & SS.clamps , with necessary other

fixture and fastening etc. The quoting price

should be inclusive of all types of taxes &

duties ,packing, transportation, forwarding,

loading, unloading. Supplied strictly as per our

technical specifications and make.As per

choice of users department and Concern

officers in charge as directed by the

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

110 Rollup Blinds Providing and fixing roller blinds of 1.00 2727.00 Smt.

the following specifications: The drive unit shall be

made up of moulded plastic with steel spring

support & inserted into the tube and it shall be

driven by a ball chain pulley with ball chain and can

be positioned at right side or left side of the shade.

The shade when lowering and rising, shall be

automatically locked in position upon release of the

ball chain by means of a buildup in friction lock.

The end plug shall be moulded of plastic with a

steel location pin. The plug shall be inserted into

the tube end. (Opposite to the driver unit) the

support brackets shall be of coated steel &

provided with covers and used in right hand

positions deffirentiated by the acceptance of the

rectangular drive unit support or round ldler plug

pin. The roller tube shall be of extruded

aluminimum with 38MM internal diameter & skin

thickness of 1MM & shall incorporate a key way

integral with the tube to accommodate the spline.

The outside diameter shall be 40MM,the bottom

rail shall be stiffening inserted into bottom rod

pocket. The material may be timber, PVC Covered

steel tube or VB bottomrail. The ball chain should

be of 2MM diameter cord with 4.5 MM diamater

acetal balls moulded co-axially to it on 6MM pitch

to form an endless ballchain, which is used for

raising or lowering action of the shades. ect

complete as per manufacturers specificatioons,

detailed technical specification and as per

from approved make vista.

111 WALL PAPER :- Providing & applying of 1.00 909.00 Sq.Mt

decorative canvas base PVC wall paper (

plain textured) fixed with anti bacterial

adhesive bartoline. ( basic rate 1200 / per Sq.

Mt. of green or equivalent), it comes in roll

from 21" or 42". The quoting price should be

inclusive of all types of taxes & duties

,packing, forwarding, loading, unloading,

installaion. As per choice of users department

and Concern officers in charge as directed by

the Architect/Engineer.

( Make :- Asian (Nilaya), Streamline (Gaenari)

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

112 3M FILM :- Providing and applying decorative 1.00 505.00 Sq.Mt

3M scotch tape or glass. The glass shall be

covered with 3M scotchcar special effect film

series 7725 as the given design by the

computerised plotter cutting process. The

appplication of the 3M special effect film shall

be done by a 3M trained applicator. 3M scotch

special effect film shall necessarily match the

following parameters :- Thickness 2 mils (0.06

MM) without adhesive, Linear - Transparent

synthetic , Opacity - Translusent , Adhesive -

Clear , Pressure sensetive,Minimum

application temprature 40* F (4* C), Flat

surface only , chemical resistence - Resist

wild acid , mild alkalis ans salts , excellent

water resistent. The quoting price should be

inclusive of all types of taxes & duties

,packing, forwarding, loading, unloading,

installaion. As per choice of users department

and Concern officers in charge as directed by

the Architect/Engineer.

113 HYDRAULIC DOOR CLOSER :- Providing & 1.00 1212.00 Nos.

Fixing Heavy Duty hydraulic Door closer

surface mounted type (grade 3) of standard

make made of cast aluminium body,

105'degree openable fixed to the door with all

necessary fixtures & fasteners etc. {Make :-

Godrej or Dorma}. The quoting price should

be inclusive of all types of taxes & duties

,packing, forwarding, loading, unloading,

installaion. As per choice of users department

and Concern officers in charge as directed by

the Architect/Engineer.

114 PICTURE FRAME 1.00 4242.00 Nos.

Providing and Supplying photo concept with

unique design, shape & decorative wooden

frame with polishing having size of 950 x

and posters are historical and decorative

artwork on the canvas materials . the photo

shall be done as per drawing. The quoting

price should be inclusive of all types of taxes

& duties ,packing, forwarding, loading,

unloading, installaion. As per choice of users

department and Concern officers in charge as

directed by the Architect/Engineer.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

115 FLOWER POT :- Providing and supplying 1.00 1818.00 Nos.

ceramic flower pot having size 450 mm dia.

The cost shall include artifical flowers,

decorative gravels etc. The quoting price

should be inclusive of all types of taxes &

duties ,packing, forwarding, loading,

unloading, installaion. As per choice of users

department and Concern officers in charge as

directed by the Architect/Engineer.

116 VENEER FINISH FALSE CEILING :- Providing,fixing, 1.00 3535.00 Sq.Mt

installation and comissioning at all height false

ceiling of 8 mm thick MR grade plywood IS

including providing and fixing of entire frame work

made of special teakwoo having size 75 mm x 38 mm

and consisting of angle cleats of size 25mm x 20 mm

at 600 mm / centre to centre on fixed to the ceiling

with dash fastner 12.5mm dia x 40mm long with 6 mm

dia. bolts to the angle hungers of 25 x 25x 5 mm of

required length, an other end of angle hanger being

fixed with nuts and bolts to 6.1 channels 45 mm x

15mm x 0.9mm running at the @ of 1200mm centre

to which the every junction including hanging with

roof, with 25mm long drive- all screws @ 230mm

interval including joining and fixing to a flush finish.

The wooden ceiling will be finished with the

approved make 4 mm thickness teak veener finished

with two coats of sealer and two coats of melamine

spray polish as per directions and also including the

cost of making openings for light fittings , grills

diffusers , cut outs made with for AC frame of suitably

fixed finishing of all joints neatly to proper line and

levels including providing of additional frame work for

electricals fixtures including giving trap doors where

ever required. Diffusers, cutouts for fire smoke

dectactor etc. as per the specification approved by

architects including necessary scaffolding supports,

suspenders etc. The quoting price should be inclusive

of all types of taxes & duties ,packing, forwarding,

loading, unloading, installaion. As per choice of users

department and Concern officers in charge as

directed by the Architect/Engineer.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

117 WOODEN TABLE (HOD) (Size :- 1800 x 915 x 760) 1.00 7575.00 Nos.

Providing and supplying wooden table having size of 1800 MM

x 915 MM x 760 MM Height. BASIC STRUCTURE: The basic

structure of the table shall be made out of 18 mm thickness

plywood IS 310 with all open edges covered with indian teak

wood beading. The top shall be of 36 mm thickness plywood +

4 mm thickness teak veneer.

DRAWER UNIT: (Size : 600 x 400 x 500 mm)The basic

structure of the drawer unit shall be made out of 18 mm ply. It

will have series of drawers (1 small at top & 3 of equal height

below the same), made out of 12 mm thickness plywood sides,

6 mm thickness plywood at bottom & 18 mm ply front facia &

side supports with sliding telescopic channels. And covered

with all exposed are of the drawer using with indian teak wood

beading , as per required size shall be fixed between each

drawers.SIDE RACK: (SIZE: 1070 x 450 x 700 MM.) BACK

SIDE RACK (SIZE : 1800 X 450 X 760) The basic structure of

the side rack shall be used in 18 mm plywood & 6 mm plywood

puthi as shown. The top shall be of 18 mm ply + 6 mm

thickness ply patta on front side.Both the side rack should have

18 mm thickness openable shutters. Both the side rack should

have 18 mm ply vertical & horizontal shelves as

required.GENERAL: The table. should have 75MM x 40MM

teak wood leg rest .There should be provision for cable

manager system with necessary cutouts in top surface. There

will be a 18 mm ply shelf for C.P.U.FINISHES: The entire table

shall be in 4 mm thickness teak veneer finish on horizontal &

vertical surfaces on all open external sides. It will be in 1MM

thickness balancing laminate on internal surfaces , including

drawers, below the top of table and back side and side rack

also. All the wooden borders / members shall be in a 2 mm

thickness hard high gloss P.U.COATING. The table shall have

all required hardwares, fixture and fastening & shall be installed

in positon. And work shall be done as per drawing and directed

by architect engineer in charge. The quoting price should be

inclusive of all types of taxes & duties ,packing, forwarding,

loading, unloading, installaion. As per detail drawing & choice

of users department and Concern officers in charge as directed

by the Architect/Engineer.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

118 WOODEN STAFF TABLE (Size :- 1500 x 750 x 760 ) 1.00 20200.00 Nos.

Providing and supplying wooden table having size of 1500 MM

x 750 MM x 760 MM Height. BASIC STRUCTURE: The basic

structure of the table shall be made out of 18 mm thickness

plywood IS 303 with all open edges covered with indian teak

wood beading. The top shall be of 36 mm thickness plywood +

1 mm thickness laminate. DRAWER UNIT: (Size : 600 x 400 x

500 mm) The basic structure of the drawer unit shall be made

out of 18 mm ply. It will have series of drawers (1 small at top &

3 of equal height below the same), made out of 12 mm

thickness plywood sides, 6 mm thickness plywood at bottom &

18 mm ply front facia & side supports with sliding telescopic

channels. And covered with all exposed are of the drawer using

with indian teak wood beading , as per required size shall be

fixed between each drawers.

SIDE RACK: (SIZE: 1070 x 450 x 760 MM.) BACK SIDE

RACK (SIZE : 1500 X 450 X 760) The basic structure of the

side rack shall be used in 18 mm plywood & 6 mm plywood

puthi as shown. The top shall be of 18 mm ply + 6 mm

thickness ply patta on front side. Both the side rack should

have 18 mm thickness openable shutters. Both the side rack

should have 18 mm ply vertical & horizontal shelves as

required.GENERAL: The table. should have 75MM x 40MM

teak wood leg rest .There should be provision for cable

manager system with necessary cutouts in top surface. There

will be a 18 mm ply shelf for C.P.U. FINISHES: The entire table

shall be in 1 mm thickness laminate finish on horizontal &

vertical surfaces on all open external sides. It will be in 1MM

thickness balancing laminate on internal surfaces , including

drawers, below the top of table and back side and side rack

also. All the wooden borders / members shall be in a 2 mm

thickness hard high gloss P.U.COATING. The table shall have

all required hardwares, fixture and fastening & shall be installed

in positon. The quoting price should be inclusive of all types of

taxes & duties ,packing, forwarding, loading, unloading,

installaion. As per detail drawing & choice of users department

and Concern officers in charge as directed by the Architect /

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

119 CONFERANCE TABLE Providing and supplying 1.00 12120.00 Sq.Mt

wooden conferance table having size of 10000MM x

600MM x 750MM Height.

BASIC STRUCTURE: The basic structure of the table

shall be made out of 18 mm plywood IS 303 with all

open edges covered with wooden beading of

required size. The top shall be of 36 mm thickness.

plywood IS 310 + 18 mm additional ply patta with

teakwood moulding of required size on external sides

& 100mm box made out of plywood on internal sides

can be made opnable to operate from the bottom for

cabelling purpose. The middle verticle support shall

be 18mm ply with 1 mm thickness balancing laminate

on both side & teakwood beading. The front will have

goove in veneer. GENERAL:The table should have

75MM x 40MM teak wood leg rest .There should be

provision for cable manager system with necessary

cutouts in top surface. FINISHING :The entire table

shall be in 4 mm thickness teak veneer finish on

horizontal & vertical surfaces on all open external

sides. It will be 1MM thickness balancing laminate

(matching to veneer) on internal surfaces. All the

expose area and wooden beading / members shall

be in 2 mm thickness hard High gloss P.U.

COATING. The table shall have required hardwares

,fixtures and fastening & it shall be installed in

position as per layout. And work shall be done as per

drawing or directed by architect engineer in charge.

The quoting price should be inclusive of all types of

taxes & duties, packing, forwarding, loading,

unloading, installaion. As per detail drawing & choice

of users department and Concern officers in charge

as directed by the Architect / Engineer.

120 TEXTURE PAINTS :- Providing and applying 1.00 909.00 Sq.Mt

coat of texture finish on wall as asian make

(Stucco design) Special effect of design or

approved by engineer in charge. As per

requirement to give ambience to suit the

concept of the theme design for offices,VC

Room,Meeting Room, Conferance area where

ever required and quality should be

maintained,the rate shall include scrapping,

levelling and preparing the surface smooth.

The quoting price should be inclusive of all

types of taxes & duties, packing, forwarding,

loading, unloading, installaion. As per detail

drawing & choice of users department and

Concern officers in charge as directed by the

Architect / Engineer.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

121 Applying Texture paint on wall surface after 1.00 0.00 Sq.Mt

scrapping the old paint and preparing the

surface and then applying water proof lapi

and primer coat and appling two coat of Royal

play paint base coat and then applying Asian

Royal play texture paint as directed including

all materials, tools and lobour etc. complete.

122 NOVA PAINTING: Providing and applying 1.00 0.00 Sq.Mt

nova paints as approved shade and

manufacture on ceiling and wall surfaces to

give an even shade including thoroughly

brushing the surface free from mortar

dropings and other foreign matter and sand

papered smooth Paint, as approved by the

Architect / Engineer in Charge.

123 PODIUM :- Providing and Supplying Lecture 1.00 8686.00 Nos.

Table/Wooden Teachers Podium having size -

700 (L) X 500 (D) X 1505/1380(H) mm the

entire structure should be made up of using

18 mm plywood IS 303 and 1.0 mm thickness

laminate with one drawer & necessary

wooden support framing with PU Polishing,

fixture and fastening. The quoting price

should be inclusive of all types of taxes &

duties, packing, forwarding, loading,

unloading, installaion. As per detail drawing &

choice of users department and Concern

officers in charge as directed by the Architect

/ Engineer.

124 DECORATIVE DOOR :- Providing & Fixing 1.00 8787.00 Sq.Mt

Wooden Decorative Door with frame, the Size

of frame 50 mm x 80 mm thickness using

with indian teak wood and door made out of

28 mm thickness IS 310 grade wooden flush

panel with applying both the side 4 mm

thickness teak veneer with Indian teakwood

beading on all exposed edges where ever

required. And all visible area of the door

applying sprey melamine polishing with

necessary hardware i.e , S. S. Door Hinges,

Decorative Door Handle,mortice lock , door

stopper etc. Complete with necessary fixtures

and fasteners of approved make. The

quoting price should be inclusive of all types

of taxes & duties, packing, forwarding,

loading, unloading, installaion. As per detail

drawing & choice of users department and

Concern officers in charge as directed by the

Architect / Engineer.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

125 STORAGE WITH LAMINATE FINISH :- 1.00 11110.00 Sq.Mt

Providing,fixing, installation at site. Side and

back storage unit 450 deep made out of

18mm thick plywood IS 310 grade and back

of the side unit is of 8mm ply puthi unit is

provided with vertical and horizontal devisions

as per design with drawers and shutters,

lockable with all handware like auto hinges,

tower bolt, magnetics catcher, handle and

lock of approved quality. The cabinet should

be raised 75/100mm above floor. Inside 1 MM

thickness balancing laminate. Exposed

outside surface finished with 1MM thickness

standard grade laminate of approved design

and make. All exposed edges finished with

first quality Teakwood beadings to be finished

in hard high gloss PU coating. The quoting

price should be inclusive of all types of taxes

& duties, packing, forwarding, loading,

unloading, installaion. As per detail drawing &

choice of users department and Concern

officers in charge as directed by the Architect

/ Engineer.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

126 MIDDLE HEIGHT PARTITION 1.00 3535.00 Sq.Mt

Providing and fixing low height partitions, the

average height of partition will be 1520 mm. The

basic structure shall be made out of the

Alluminium tubular/rolled section as framing

Aluminium Box Section size of 50mm x 25mm x

1.6mm thickness & at suggested intervals i.e

c / c fixed with each other 50MM*25MM*1MM

thickness angle cleat proper fixity. The entire Alu.

frame work shall be covered with 8 mm thickness

plywood IS 310 on both the sides. All open sides of

the framework shall be covered with the 12 mm

thickness plywood for partitions. All the gaps either

vertical or horizontal with proper material shall be

filled properly. All the vertical members of the

partition shall be inserted / fixed in the floor for

proper strength necessary provisions shall be

made in the partition for the electrical conduits /

switch boards/etc. The external plywood

components including the thcikness of partition

shall be finished with 1 MM thickness decorative

laminate on both the sides. All visible exposed area

of the partition covered with Indian teak wood

beading where ever required. It shall have (3

coats)malamine sprey polishing finish. The quoting

price should be inclusive of all types of taxes &

duties ,packing, forwarding, loading, unloading,

installaion. As per detail drawing & choice of users

department and Concern officers in charge as

directed by the Architect /

127 HIGH BACK CHAIR :- Providing and 1.00 26260.00 Nos.

supplying Revolving High Back Chair HOF

ZOR-451. Ergonomic design. Knee tilt

synchro mechanism with multi position locking

arrangement and aluminium die cast arm rest

with cushioned pad. Specially designed anti

topple chrome polished base, class-3 gas lift

for seat hight adjustment & glass filed nylon

castors for smooth movement,45 DC mouled

cusion in seat and extra soft cushion for better

comfort. The chair include pneumatic seat

height adjustments. The sheet and back

should be covered with approved genuine

leather and PU leather finish. The cost

including loading,unloading and

Transportation Charges ect. As per choice of

users department and Concern officers in

charge as directed by the engineer incharge.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

128 COMPUTER TABLE :- Providing and 1.00 6565.00 Nos.

Supplying computer table having size:

MM * 600 MM* 1066 MM. The entire frame

structure should be made with 18 mm

Plywood IS 310. Top of the table and all

exposed area finished with 1 MM thickness

laminate and 0.80 thickness balancing

laminate, leaping with 25 x 12 MM thickness

teakwood beading. Also provide CPU Trolly,

Foot Rest, key board tray fitted with

necessary fittings such as wire / cable

manager, auto closing hinges, stainless steel

handle, multipurpose lock, sliders, and other

necessary hardware, with fully closed back

panel. All wooden beading finish with

malamine spray polishing, it should give the

feeling of warmth and blends with the office

ambience, Should be compact with ample

storage & it must also be aesthetically

appealing in looks. And the must , it Should

be Stylish, Sturdy and durable. The quoting

price should be inclusive of all types of taxes

& duties ,packing, forwarding, loading,

unloading, installaion. As per detail drawing &

choice of users department and Concern

officers in charge as directed by the Architect

/ Engineer.

129 WHEEL CHAIR :- Providing & Supplying 1.00 12120.00 Nos.

Wheel Chair with Overall Size: 94 cm (L) x

cm (W) x 116 cm (H) seat Dimensions 46 cm

W x 47 cm D x 53.5 cm H, having Velcro belt

and foot straps Made with SS tubular

framework construction, Fixed seat and

backrest with refine cover provides steady

support and comfort. Front swivelling castors

are of 15 cm dia. Rear wheels are of cycle

rings with solid rubber tyres Folding leg rests

support feet of aluminium. Manufacturer

should have CE certification. The quoting

price should be inclusive of all types of taxes

& duties ,packing, forwarding, loading,

unloading, installaion. As directed by the

Architect / Engineer.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

130 DOUBLE BED :-Providing and supplying 1.00 59590.00 Nos.

DOUBLE BED with wall mounted headboard

which shall be fixed to wall with a suitable

clipping arrangement, the headboard

thickness not less then 38MM. bed made up

of fully Indian teak wood & (18/12/8MM)

plywood , (1MM) laminate ,(4MM) veneer

where ever required. as per design and

drawing. Having size 2060mm x 1845mm x

375mm Height with two side Box along the

Drawer. With necessary wooden supports and

framing " work with groove for opening

without handle necessary fixtures and

fastenings. Inclusive cost of malamine sprey

Polishing & 150mm thickness sleep well or

equivalent brand mattress. Bombay Dyeing

bed sheets , two nos. pillow with cover

approved quality etc. All the materials shall

be used as per approved make. And work

shall be done as per drawing or directed by

engineer in charge.

131 WARDROBE CUM DRESSING :- Providing 1.00 14140.00 Sq.Mt

and Supplying Wooden Wardrobe 2 in

Wardrobe cum Dressing Unit. The unit

structure will be made with 18/12/8MM

plywood, 4MM veneer on all visible part and

inside the wardrobe 1MM thickness balancing

laminate which will have 2 drawers , hanging

rod , shelves inside of the wardrobe. The door

of wardrobe 19MM plywood with balancing

laminate & outside the door applying 4MM

veneer. The dressing part will have

drawers with 1200MM height mirror. the

approx size of the unit is 2280 mm x 1820 mm

x 533mm depth. , with the Accessories i.e

S.S. auto hinges, S.S. handle, S.S. cloth

hanger rod and other fixtures & fastening etc.

incl. cost of malamine sprey polishing. Usage

of all materials shall be strictly as per the

make list & Sample approved. As directed by

engineer in charge.Usage of all materials

shall be strictly as per the make list & Sample

approved. As directed by engineer in charge.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

132 DOOR MAT :- Providing & Supplying 1.00 707.00 Nos.

synthetic door mats (3M) size not less than

1200 x 600 mm. The cost including

loading,unloading and Transportation

Charges ect. As per choice of users

department and Concern officers in charge as

directed by the engineer incharge.

133 FLATBED TROLLEY :- Providing & Supplying 1.00 9090.00 Nos.

flatbed metal platform trolley,with maximum

load capacity 500kg, heavy duty steel

platform, mobile flatbed cart. Having size

1200 x 800 x 1000 mm. The entire structure

shall be made with cold rolled steel and top of

trolley having solid plate frame welded.

Having handrail 32 mm Ø and with 2mm wall

thickness. Caster Ø 150 mm i.e PU Wheel

directional with 2 universal break. The cost

including loading,unloading and

Transportation Charges ect. As per choice of

users department and Concern officers in

charge as directed by the engineer incharge.

134 Supplying & erecting Philips / Ahuja make 1.00 15150.00 Nos.

control Amplifier comprising Two nos. MIC

volume control, One Aux. Volume control

BASS & TREBLE control, Master Volume

Control, Line Level Control, LED Array, input

to facilitate recording. PA Amplifier section

operating on AC 220- 240V or 12 V DC, with

power output 70W ROMS max. & input of 3 X

MIC 0.6mv / 4.7 K.Ohms & I x Aux. 50mv /47

K.Ohms with frequency response 90-16000

Hz with two 7 pin line connectors & capable

up to 50 conference units. Supplying and

erecting Philips / Ahuja make Weather & Dust

resistant sound column with Aluminium case

& Aluminium mesh grille with foam layer

taps / impedance having frequency response

150-20000 Hz with above specifications.

complete as directed by Engineer in charge.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

135 STORAGE WITH VENEER FINISH :- 1.00 18180.00 Sq.Mt

Providing,fixing, installation at site. Side and

back storage unit 450 deep made out of

18mm thick plywood IS 310 grade and back

of the unit is of 8mm ply puthi, unit is provided

with vertical and horizontal devisions as per

design with drawers and shutters, lockable

with all handware like auto hinges, tower bolt,

magnetics catcher,handle and lock of

approved quality. The cabinet should be

raised 75/100mm above floor. Inside 1 MM

thickness balancing laminate finish. Exposed

outside surface finished with 4MM thickness

teak veneer with standard grade of approved

design and make. All exposed edges finished

with first quality Teakwood beadings to be

finished with hard high gloss PU coating. The

quoting price should be inclusive of all types

of taxes & duties ,packing, forwarding,

loading, unloading, installaion. complete as

per drawing and direction of Architect/

Engineer in charge.

136 WALL CLADDING :- Providing & fixing 1.00 1919.00 Sq.Mt

decorative paneling on wall . Framing shall

consist of alumimium section 40MMx 20MM

wall thickness of 1.6 MM @ 600MM/600MM

c/c. both way horizontally and vertically on the

way. The framing would be covered by 8MM

thickness Celluloid sheets indian standard

Finished with 1 Coats of birla putty 1 coats of

primer and 2 coats of plastic paints with sprey

with combination of wallpaper and texture

paint. Basic cost of wallpaper not less then

1200 per.sq.mt. complete as per image and

all the materials shall be used as per

approved make. The quoting price should be

inclusive of all types of taxes & duties

,packing, forwarding, loading, unloading,

installaion. And work shall be done as per

detailed drawing and as directed by architect

engineer in charge.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

137 ARTIFICIAL GRASS :- Providing & Supplying 1.00 1717.00 Sq.Mt

U.V Stabilized eco-friendly natural green

artifical lawn with safe and resilient surface.

Premium high density grass with 25 MM grass

height with PVC base. All material shall

accord with environmental protection

requirement. The quoting price should be

inclusive of all types of taxes & duties

,packing, forwarding, loading, unloading,

installaion. And as per the drawing/ image &

the chioce of user and as directed by architect

engineer in charge.

138 DINING TABLE :- Providing & supplying of 1.00 13130.00 Nos.

Dining table with top size 8 ft x 3 ft x 2.5 ft

(height) the structure made out by SS

grade round pipe (totally rust and moisture

proof) , 50 mm OD with 2 mm thickness and

table top made from 19mm thickness BWP

IS 710 ply with 1mm thick laminate on both

the side. Top to be rest on 50 mm dia S.S

brush finish leg and structure. The quoting

price should be inclusive of all types of taxes

& duties ,packing, forwarding, loading,

unloading, installaion. And as per the drawing/

image & the chioce of user and as directed by

architect engineer in charge.

139 SS DINING CHAIR :- Providing and supplying 1.00 3939.00 Nos.

SS Dining chair as per standard size

structure and body made out by 304 grade

25 mm OD and 1 mm thickness stainless

steel pipe totally rust and moisture proof. The

quoting price should be inclusive of all types

of taxes & duties ,packing, forwarding,

loading, unloading, installaion. And as per the

drawing/ image & the chioce of user and as

directed by architect engineer in charge.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

140 WOODEN BENCHES :- Providing & 1.00 4747.00 Nos.

Supplying wooden Benches for the accused

seating in the court room having size:-

1800mm (L) x 300mm (W) x 450 mm (H) the

entire structure must be made with specified

wooden framing and top should be made with

18 MM thick MR grade plywood of IS 303 of

approved brand with cushion seat, shade,

pattern as specified. As per detail drawing. All

wooden surfaces should be polished with

coats of melamine sealer and 2 coat of

melamine polishing. The work also includes

all necessary hardware, fixtures and fasteners

etc. The cost including loading,unloading and

Transportation Charges ect. As per choice of

users department and Concern officers in

charge as directed by the engineer incharge.

141 WOODEN RAILING :- Providing and fixing 1.00 5959.00 Sq.Mt

wooden low hight railing having approx. size

1220MM height. The railing made up of

Indian teak wood with chemical treatment

wood must be seasoned and passed out from

byflex chemical treatment, wood must be

passed of 10% high temprature of seasoning

chamber, wood joints are properly fill up by

fevicol adhesive SH. The vertical member of

railing having size of

100MMx100MMx1220MM height. The top and

bottom support of railing is Min. size

100x100MM thickness and length as per

required in addition middle part of railing using

18MM boiling water proof plywood with both

side 1MM thickness laminate & aslo where

ever required wooden strips size of

40MMx25MM thick & hight as per railing

requirement.And provision of one trap door.

As per design and drawing along with

necessary fixtures and hardware. Inclusive

cost of three coats malamine sprey

Polishing, with approved brand & quality. All

the materials shall be used as per approved

by engineer incharge. And work shall be done

as per drawing & specification.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

142 Wooden Stool 1.00 1515.00 Nos

Providing & Supplying Wooden Stool having

size of 300 (W) X 300 (D) X 460 (H) mm,

Teakwood Leg size of 50 x50mm thick, the

Seat shall be of 18 mm thickness plywood +1

mm thickness Laminate etc. Three of coats of

melamine polishing, plastic buffers, etc. The

cost including loading, unloading and

Transportation Charges ect. As per choice of

users department and Concern officers in

charge as directed by the engineer incharge.

143 Glass Top 1.00 1313.00 Sq.Mt

Providing, supplying and installation 8mm

thick clear glass on top on laminate or veneer

finished table rest on vaccumes as

reuires.Glass have bewel edjes.fitting as per

details given in drawing asper instructions of

architect/engineer in charge. contractor has to

provided all necessry cut outs for electrical

work & no extra payment shall be made for it.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

144 THREE SEATER SOFA SET 1.00 39996.00 Nos

Made From teak wood structure, wood size must

be 2” x 2” clear size, 19mm thick MR grade ply will

be used for structure, Ply must be used of ISI

Mark, Sofa set cushion must be in 40 density poly

urithin material in seat and back , Poly urithin must

be used of ISI mark and with the IS standards

Polyurithin must be joints with the standard gluent

and necessary hardware. Sofa covered with

standard tepestry with the cotton base and joints

with double stitching, Sofa cushion as per IS

standard and with ISI mark required On the

polyurithin foam, cushion covered with standard

tepestry of sanil and make of sanil as per

standards and fabric quality also standard brand .

Sofa seating depth must be 22” from the back,

back height must be 21” from seat in seat 5”

polyurithin thickness required and in back 4”

polyurithin thickness required.Base made from SS

304 with mett finish buffing and 6mm thick rubber

layer in the base,Recron must be used in back and

seat for the softness.Sofa handel made from

plywood box and inside seasoned wood

support,handel covered with 40 density polyurithin

and with the layer of recron and covered with

standard tapestry.

Size : 72" x 30" x 30"

.complete as per drawing given by architect &

direction given by Engineer in charge.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

145 TWO SEATER SOFA SET 1.00 34340.00 Nos

Made From teak wood structure, wood size

must be 2” x 2” clear size, 19mm thick MR

grade ply will be used for structure, Ply must be

used of ISI Mark, Sofa set cushion must be in

40 density poly urithin material in seat and back

, Poly urithin must be used of ISI mark and with

the IS standards Polyurithin must be joints with

the standard gluent and necessary hardware.

Sofa covered with standard tepestry with the

cotton base and joints with double stitching,

Sofa cushion as per IS standard and with ISI

mark required On the polyurithin foam, cushion

covered with standard tepestry of sanil and

make of sanil as per standards and fabric

quality also standard brand . Sofa seating depth

must be 22” from the back, back height must be

21” from seat in seat 5” polyurithin thickness

required and in back 4” polyurithin thickness

required.Base made from SS 304 with mett

finish buffing and 6mm thick rubber layer in the

base,Recron must be used in back and seat for

the softness.Sofa handel made from plywood

box and inside seasoned wood support,handel

covered with 40 density polyurithin and with the

layer of recron and covered with standard

tapestry.Size : 54" x 30" x 30" complete as per

drawing given by architect & direction given by

Engineer in charge.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

146 ONE SEATER SOFA SET 1.00 20200.00 Nos

Made From teak wood structure, wood size must

be 2” x 2” clear size, 19mm thick MR grade ply will

be used for structure, Ply must be used of ISI

Mark, Sofa set cushion must be in 40 density poly

urithin material in seat and back , Poly urithin must

be used of ISI mark and with the IS standards

Polyurithin must be joints with the standard gluent

and necessary hardware. Sofa covered with

standard tepestry with the cotton base and joints

with double stitching, Sofa cushion as per IS

standard and with ISI mark required On the

polyurithin foam, cushion covered with standard

tepestry of sanil and make of sanil as per

standards and fabric quality also standard brand .

Sofa seating depth must be 22” from the back,

back height must be 21” from seat in seat 5”

polyurithin thickness required and in back 4”

polyurithin thickness required.Base made from SS

304 with mett finish buffing and 6mm thick rubber

layer in the base,Recron must be used in back and

seat for the softness.Sofa handel made from

plywood box and inside seasoned wood

support,handel covered with 40 density polyurithin

and with the layer of recron and covered with

standard tapestry.Size : 33" x 30" x 30"

.complete as per drawing given by architect &

direction given by Engineer in charge.

147 Dinning Chair Repairing 1.00 3535.00 Nos

Repairing of dinning chair with replacement of

seat and back PU foam with 12mm thick

plywood, Chair with malamine polish , With all

required necessery material and hardware,

Chair cushion covered with standard tapestry

complete as suggested by ebgineer in charge.

148 Providing Three seater visitor's chair of given 1.00 7272.00 No

design using all members & material's and

size as under : Seat material is of MS

perforated sheet with good quality coating of

chrome plating.

149 Executive Office table with side rack Providing 1.00 27270.00 No

and fixing of modular table having MDF board

construction size of 2100mm x 1100 mm x

750 mm (LxBxH) with proper pedestal unit of

size and side rack unit with size 900 mm x

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

150 Office staff table Providing and fixing of 1.00 16160.00 No

modular table having MDF board construction

size of 1500mm x 750 mm x 750 mm (LxBxH)

with proper pedestal unit.

151 Visitor chair with cushion Chair of overall size 1.00 3131.00 No

550±10mm (W) wide, 600 ± 10 (D) depth and

± 10mm overall height with 460 ± 10mm seat

height (SH) with wide base of M.S.CRCA pipe

having diameter of 25mm and thickness of

1.63±0.12 mm with powder coating confirming to

ISI. The tubular structure must have stability and

must be well balanced with choice of upholstery for

cushion tested for fastness to light, rubbing and

washing on bottom (seat) and back of PU foam (

40 density)50 ± 5mm thick. Chair must have

cantilevered reinforced tubular steel structure of

M.S.CRCA pipe having diameter of 19 mm and

thickness of 1.63±0.12 mm with powder coating

confirming to ISI. Seat and back should not be

mounted on hot formed plywood but must be

mounted with spring-steel structure/arrangement.

The backrest and seat must be dimensioned and

curved from ergonomics point of view. Refer the

figure to add in specifications. Figure is to be

referred without arms. Pipe, steel, cushion material

and spring must be confirming to suitable BIS

having ISI marks. Test certificates are to be

provided by supplier. Screws/bolts must be

provided with proper spring washers. Four plastic

legs/bushes are to be screwed at bottom. Arm

rests must be of soft grade

152 Large size Cupboard with safe Steel selving 1.00 7575.00 No

cabinet of large size with 5 number of

shelves. Out of these shelves on side of one

shelve must have locking facility. Size of

cupboard should be 1980 mm (H) x 910 (W)

153 Large size Cupboard without safe Steel 1.00 6767.00 No

selving cabinet of large size with 4 number of

shelves. Size of cupboard should be

154 Small size Cupboard Steel selving cabinet 1.00 6868.00 No

of large size with 4 number of shelves. Size

of cupboard should be 1280 mm (H) x

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

155 Steel file cabinet of 4 compartment. Steel 1.00 5858.00 No

Filing Cabinets shall be stove enamelled in

light bronze green shade no.222 or Dove

Grey shade no.694 of IS 5:1994 amdt.1 or

any other colouras specified by the indentor.

Steel sections/sheet shall be treated for anti-

corrosive treatment with seven tank treatment

process as per requirements of clss C of IS

3618:1986.One coating of primer shall be

applied followed with one coat of stove

enamelled paint. The components shall be

assembled by spot welding conforming to IS

819:1957 The height of the pedestal shall be

75 mm. Drawers shall be provided with cradle

strip and fitted with automatic check to

prevent rebound. Tenderers to indicate the

type of handles provided as per clause5.7 of

I.S.S. Label holder shall be made of corrosion

free material like pvc etc. The thickness of the

steel sheet indicated in I.S. shall be taken as

nominal thickness.

156 Providing PVC flower pot of good quality and 1.00 1111.00 No

required shape filled with good soill and

fertilizer having a plant with minimum size

feet etc. complete as directed by engineer in

157 Supplying Glass top tipoi with good quality 1.00 6363.00 No

frame work and fittings etc. complete having

size 60 cms x 90 cms.

158 Wallpaper Panelling 1.00 4141.00 Smt.

Providing & fixing wooden wallpaper panelling

using with decorative wall paer @150/- per

sqft. All wall finish with POP panelling and

water proofing activity. All the edes of

wallpaper finish with joint less finish.As

directed by engineer in charge.

159 Providing & fixing double shutter door of 1.00 6555.02 Smt.

WP 18mm thick plywood finished with both

side 0.8 mm thick lamination both side , of

natural wood grain shade with necessary teak

wood frame as with necessary approved by

this office as per the instruction of Engineer in

charge.with necessary SS hinges and

fixtures etc . complete.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

160 Providing & fixing wooden VIP T.V. unit 1.00 5592.30 Smt.

19mm thick plywood in frame and box section

and dressing structure with 1.0 mm thick

decorative laminate sheet on outside and in

side portion with necessary fixture and

fastening etc completeas directed.

161 Steel work, riveted in built up sections framed 1.00 6747.09 Qnt.

work including cutting, hoisting, fixing in

position and applying a priming coat of read

lead paint. (D) In trussses and trussed purlins,

upto 25 M. span and 15 M ovarall height.

162 Providing corrugated PPGL Sheets roofing 1.00 809.18 Smt

fixed with Galvanized iron 'j' or 'L' hooks bolts

and nuts 8 m. diameter with bitumen and

G.I.Limpet washers filled with white lead

complete including ridges, gutters etc.

excluding the cost of purlins, rafters and

trusses. 1) 0.60 mm. Thick sheet

163 Providing & fixing 2 mm thick UPVC shade 1.00 2508.43 Smt.

with necessary MS Hollow section frame work

with necessary fastening and fittings etc.

complete with two coats of automotive paint.

164 Providing & fixing Polycarbonate sheet shade 1.00 1919.00 Smt.

with necessary MS Hollow section frame work

with necessary fastening and fittings etc.

complete with two coats of automotive paint .

165 Providing and fixing in position collapsible 1.00 6110.52 Smt.

steel shutters with vertical channels 20 x 10 x

2mm braced with flat iron diagonals 20x5mm

size with top and bottom rails of T-Iron 40 x

40 x 6mm with 38 mm dia steel pulleys

complete with bolts, nuts, locking

arrangement, stoppers handles including

applying a priming coat of red lead paint.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

166 Providing and fixing extruded aluminum 1.00 2140.34 Smt.

window having extruded aluminum colour

anodized section frame main outer size

127mm x 38.10mm x 1.35mm (of Jindal

section no. 2443@ Wt. 1.384 Kg/mt),

horizontal four track member size 122.20mm

x 31.75mm x 1.10mm (of Jindal section no.

8787, @ Wt. .205 Kg/mt), vertical member of

size 122.20mm 31.75mm x 1.50mm (of Jindal

section no. 8935 @ Wt. 1.398 Kg/mt) with

sliding shutters of horizontal member size

40mm x 18mm x 1.29mm (of Jindal Section

No. 8949 @ Wt. of 0.456 Kg/mt), vertical

member of size 40mm x 18mm x 1.29 mm (of

Jindal section no: 8947 @ Wt. of 0.456 kg /

mt/ Section 8948@ Wt. 0.457 Kg/Mt) with

mm th transparent bronze colour tinted float

glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant

glass fixing to frame as per details etc. for

167 Providing and fixing window having extruded 1.00 1583.96 Smt.

aluminum colour anodized section frame main

outer size 95mm x 24mm x 1.17mm (of Jindal

section no. 2459@ Wt. 0.738 Kg/mt),

horizontal three track member size 92mm x

31.75mm x 1.30mm (of Jindal section no.

8688, @ Wt. 1.07 Kg/mt), vertical member of

size 92mm 31.75mm x 1.50mm (of Jindal

section no. 8933 @ Wt. 1.06 Kg/mt) with

sliding shutters of horizontal member size

40mm x 18mm x 1.29mm (of Jindal Section

No. 8947 @ Wt. of 0.456 Kg/mt), vertical

member of size 40mm x 18mm x 1.29 mm (of

Jindal section no: 8949 @ Wt. of 0.456 kg /

mt) with 5 mm th transparent bronze colour

tinted float glass with powder coated

aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per

details etc.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

168 Providing and fixing window having extruded 1.00 1713.70 Smt.

aluminum colour anodized section frame main

outer size 63.50 x 38.10x 1.95mm (of Jindal

section no. 4605@ Wt. 1.094 Kg/Rmt),

horizontal two track member size 61.85mm x

31.75mm x 1.20mm (of Jindal section no.

8687, @ Wt. 0.695 Kg/mt), vertical member of

size 61.85mm x31.75mm x 1.30mm (of Jindal

section no. 8758 @ Wt. 0.659 Kg/mt) with

sliding shutters of horizontal member size

40mm x 18mm x 1.29mm (of Jindal Section

No. 8949 @ Wt. of 0.456 Kg/mt), vertical

member of size 40mm x 18mm x 1.29 mm (of

Jindal section no: 8947 @ Wt. of 0.456 kg /

mt / section 8948, @ Wt. 0.457 kg/mt) with

mm th transparent bronze colour tinted float

glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant

glass fixing to frame as per details etc

completed for window

169 Providing and fixing window having extruded 1.00 2323.00 Smt.

aluminum colour anodized section frame main

outer size 63.50 x 38.10x 1.95mm (of Jindal

section no.4605@ Wt. 1.094 Kg/Rmt),

horizontal two track member size 61.85mm x

31.75mm x 1.20mm (of Jindal section no.

8687, @Wt. 0.695 Kg/mt), vertical member of

size 61.85mm x31.75mm x 1.30mm (of Jindal

section no. 8758 @ Wt. 0.659 Kg/mt) with

sliding shutters of horizontal member size

40mm x 18mm x 1.29mm (of Jindal Section

No. 8949 @ Wt. of 0.456 Kg/mt), vertical

member of size 40mm x 18mm x 1.29 mm (of

Jindal section no: 8947 @ Wt. of 0.456 kg /

mt / section 8948, @ Wt. 0.457 kg/mt) with

mosquito jali with powder coated aluminum

fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc

completed for window.

170 Providing and fixing standared extruded of 1.00 1301.82 Smt.

alluminium section of size 63.50x38.10x1.95

mm (of Jindal section No. 4605, @ Wt.

Kg per Rmt with colour anodized alluminium

frame with 5 mm thick transparent bronze

colour tinted float glass with colour anodized

alluminium frame for ventilation with 5 mm

thick frosted glass as details etc. complete for

window/Ventilation

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

171 Providing and fixing standared extruded of 1.00 1175.56 Smt.

alluminium section of size 63mm x 38.10mm

x1.2mm (of Jindal section No. 2434, @ Wt.

0.643 Kg per mt) with colour anodized

alluminium frame for ventilation with 5 mm

thick frosted glass as details etc.complete for

172 Providing and fixing standared extruded of 1.00 1525.00 Smt.

alluminium section of size 63.50x38.10x1.95

mm (of Jindal section No. 4605, @ Wt.

Kg per Rmt with colour anodized alluminium

frame with 5 mm thick transparent bronze

colour tinted float glass as details etc.

complete for fix window.

173 Providing & fixing CRC sheet shade with 1.00 3333.00 Smt.

necessary MS Hollow section frame work with

necessary fastening and fittings etc. complete

with two coats of automotive paint as per

instruction of engineer in charge.

174 Providing and fixing rolling shutter of 1.00 3554.41 Smt.

approved make made of 80mm wide M.S.

laths interlocked together through their enter

lengths and jointed together at the end locks

mounted on specially designed pipe shall with

bracket plates guide channels and outside

locking with push & pull operation including

cost of hood cover and spring etc

complete.(A) Shutters having width below

175 Removing dry or oil bound distemper by a 1.00 114.53 Smt.

washing and scrapping and sand papering the

wall surface smooth including necessary

repairs to scratches complete

176 Distempering (One coats) with oil bound 1.00 28.64 Smt.

distemper of approved brand and

manufacture and of required shade on wall

surface to give an even shade over and

including a priming coat with distemper primer

of approved brand and manufacture after

thoroughly brushing the surface free from

mortar dropping and other foreign matter and

also including preparing the surface even and

sand papered smooth.

177 Finishing wall with water proofing cement 1.00 65.25 Smt.

paint on wall surface (two coats) to give an

approved brand and manufactures and of

required shape even shade after thoroughly

brushing the surface to remove all dirts, and

remains of loose powdered material.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

178 Distempering (Two coats) with oil bound 1.00 75.43 Smt.

distemper of approved brand and

manufacture and of required shade on wall

surface to give an even shade over and

including a priming coat with distemper primer

of approved brand and manufacture after

thoroughly brushing the surface free from

mortar dropping and other foreign matter and

also including preparing the surface even and

sand papered smooth.

179 Wall painting (two coats) with plastic emulsion 1.00 82.98 Smt.

paint of approved brand and manufacture on

wall surfaces to give an even shade including

thoroughly brushing the surface free from

mortar droppings and other foreign matter

and sand papered smooth.

180 Extra over item 106 for every subsequent coat 1.00 42.56 Smt.

of wall painting with plastic emulsion paint of

approved brand

181 Applying priming coat over new steel and 1.00 36.87 Smt.

other metal surfaces after and including

preparing the surface by thoroughly cleaning

oil, grease dirt and other foreign matter and

scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed

priming paint brushing red lead.

182 Painting two coats (excluding priming coat) on 1.00 92.18 Smt.

new steel and other metal surfaces with

enamel paint brushing, interior to give an

even shade including cleaning the surface of

all dirt, dust and other foreign matter.

183 Painting one coat (excluding priming coat) on 1.00 58.13 Smt.

previously painted steel and other metal

surface with enamel paint, brushing to give an

even shade including cleaning the surface of

all dirt, dust and other foreign matter.

184 Extra over item 107 and 108 for every 1.00 57.26 Smt.

subsequent coat of paint.

185 Polishing with French polish on previously 1.00 71.67 Smt.

polished wood and wood based surface to

give an even surface including cleaning the

surface of all dirt, dust and sand papered

smooth including a coat of wood filler.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

186 Wall painting (two coats) with luxury plastic 1.00 82.98 Smt.

emulsion (Royale) paint of approved brand

and manufacture approved by Engineer-in-

charge over lapi-putty and priming coat of

approved brand primer on undecorated wall

surface to give an even shade including

thoroughly brushing the surface free from

mortar droppings and other foreign matter

and sand papered smooth.

187 Scraping oil paint/ Paint from steel and other 1.00 51.79 Smt.

metal surface and making the surface even

(with Hand Scraping.)

188 Applying two coats of Birla or Asian acrylic 1.00 40.60 Smt.

lappy (putty) and two coats of primer of

approved brand and manufacture on new wall

surface to give an even shade including

thoroughly brushing the surface free from

mortar dropping and other foreign matter and

sand papered smooth.

189 Providing and Laying BITUMAT SYNROOF 1.00 707.00 Smt.

HIBUILD an elastometric premium quality

acrylic coating on terrace in two layers each

of average 1 mm thick waterproofing

membrane finished which consist of a coat of

bitumen primer and middle layer of 80 GSM

geotextile with ultra violet resistance and

working up to any height with the 5 years of of

guarantee against any leakage etc. complete

as per detail specification and as directed by

engineer in charge.

190 Applying general insecticide pest control 1.00 80.63 Smt.

treatment to floors, cupboards etc. including

labour material etc. complete.

191 Carrying out plinth treatment to post 1.00 86.82 Smt.

construction/existing structure by spraying

chemical solution for termite control treatment

including labour and material consistent with

I.S.I specification.

192 Carrying out wall treatment for termite control 1.00 29.04 Smt.

including spraying with chemical solution in oil

base (0.5 Lit/Sq.m) including labour and

193 Providing erecting and fixing double coated 1.00 7.07 Lit

Syntex or equivalent PVC. (ISI) mark water

tank of reqd capacity each with all necessary

fittings & connection etc. comp on terrace.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

194 Providing & fixing water closet squatting pan 1.00 1434.80 Each.

(Indian type W.C. pan) size 580 mm. with

100mm. Size P or S trap including jointing the

trap with the pan & soil pipe in cement morter

1:1 (1 cement : 1 fine sand) (earthwork, bed

concrete and foot rests to be measured and

paid for separately) [A] Vitreous China (i)

Long pattern white colour.

195 Provision and fixing water closet squatting 1.00 1809.48 Each.

orissa type W.c. pan size 580mm integral

footrest and 100 mm P or S trap and in

cluding 25 mm dia CP brass flush valve and

GI inle connection etc. comp. (A) Vitreous

china long pattern white or color

196 Providing and fixing washbasin with single 1.00 1587.42 Each.

hole for pillar tap with C.I. or M.S. brackets

painted white including sutting holes and

making good the same including fittings.(A)

Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.

197 Providing & fixing wash basin with single hole 1.00 1418.51 Each.

for pillar tap with C.I. or M.S. brackets painted

white including cutting holes and making good

the same but excluding fittings. (A) Vitreous

China [i] Flat back washbasin of size 550mm.

X 400mm. In white colour.

198 Providing & fixing Vitreous China pattern - 1 in 1.00 1356.82 Each.

white colour water closet squatting pan

(European type W.C. pan) size 580mm. With

integral 'P' or 'S' trap including jointing the trap

with soil pipe in cement morter 1:1 (1 cement :

1 fine sand) including providing and fixing

black plastic seat cover for wash down water

closet with C.P. Brass hinges and rubber

199 Providing & fixing 600mm. X 450mm. 1.00 859.41 Each.

Bevelled edge mirror of superior glass

mounted on 6mm. Thick A.C. sheet or

plywood sheet & fixed to wooden plugs with

C.P. brass screws & washers.

200 Providing & fixing screw down bib taps of 1.00 186.83 Each.

following size.[B] Brass chromium plated

screw down bib tap. (i) 15 mm. diameter.

201 Providing & fixing screw down bib taps of 1.00 214.81 Each.

following size.[B] Brass chromium plated

screw down bib tap. (ii) 20 mm. diameter.

202 Providing & fixing brass screw down bib stop 1.00 205.83 Each.

tap.[A] 15mm. Diameter.

203 Providing & fixing brass screw down bib stop 1.00 223.81 Each.

tap.[B] 20mm. Diameter.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

204 Providing & fixing urinal of approved quality 1.00 1074.87 Each.

including connecting the urinal with waste

pipe, trap etc. complete. [A] White

earthenware flat back or corner type size

205 Providing & fixing C.I. Manhole cover 0.60 mt. 1.00 958.17 Each.

X 0.45 mt. size having weight not less than

206 Providing & laying (To level or slopes) & 1.00 225.58 Rmt

joining with stiff, mixture of cement morter in

proportion 1:1, salt glazed stoneare pipes

following nominal internal diameters including

testing of pipes and oints complete..[A]

100mm. Diameter.

207 Providing & laying (To level or slopes) & 1.00 317.48 Rmt

joining with stiff, mixture of cement morter in

proportion 1:1, salt glazed stoneare pipes

following nominal internal diameters including

testing of pipes and oints complete..[B]

150mm. Diameter.

208 Providing & fixing S.W. Gully trap with C.I. 1.00 1292.20 Each.

grating brick masonary chamber & water tight

C.I. cover with frame of 300mm. X 300mm.

Size (inside) with standard weight. [I] Square

mouth trap.[A] 100mm. X 100mm. Size P-

209 Providing & fixing S.W. Gully trap with C.I. 1.00 1246.92 Each.

grating brick masonary chamber & water tight

C.I. cover with frame of 300mm. X 300mm.

Size (inside) with standard weight. [I] Square

mouth trap.[B] 150mm. X 100mm. Size P or

210 Construcing brick masonary chamber for 1.00 2932.93 Each.

under gaoung C.I. inspeaction chamber and

bends with bricks having crusing strength not

less than 35 Kg./Sqcm. In C.M. 1:5 C.I. cover

with frame (Light duty) 455mm. X 610mm.

Internal dimension, total weight of cover with

frame to be not less than 28 kg. (Weight of

cover 23 kg. weight of frame 15 kg.) R.C.C.

top slab with 1:2:4 mix ( 1 cement : 2 coarse

sand : graded stone aggregate 20 mm.

nominal size) foundation concrete 1:5:10

inside plaster 15 mm. thick with cement

mortar 1:3 finished smooth with with a floating

coat of neat cement on walls and bed

concrete etc. complete. [I] Inside

dimension 455mm.X610mm. & 450mm. deep

for single pipe.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

211 Construcing brick masonary chamber for 1.00 3660.76 Each.

under gaoung C.I. inspeaction chamber and

bends with bricks having crusing strength not

less than 35 Kg./Sqcm. In C.M. 1:5 C.I. cover

with frame (Light duty) 455mm. X 610mm.

Internal dimension, total weight of cover with

frame to be not less than 28 kg. (Weight of

cover 23 kg. weight of frame 15 kg.) R.C.C.

top slab with 1:2:4 mix ( 1 cement : 2 coarse

sand : graded stone aggregate 20 mm.

nominal size) foundation concrete 1:5:10

inside plaster 15 mm. thick with cement

mortar 1:3 finished smooth with with a floating

coat of neat cement on walls and bed

concrete etc. complete.[II] Inside dimension

500mm.X 700mm. & 450mm. deep for pipe

line with one or two.

212 Construcing brick masonary chamber for 1.00 7180.45 Each.

under gaoung C.I. inspeaction chamber and

bends with bricks having crusing strength not

less than 35 Kg./Sqcm. In C.M. 1:5 C.I. cover

with frame (Light duty) 455mm. X 610mm.

Internal dimension, total weight of cover with

frame to be not less than 28 kg. (Weight of

cover 23 kg. weight of frame 15 kg.) R.C.C.

top slab with 1:2:4 mix ( 1 cement : 2 coarse

sand : graded stone aggregate 20 mm.

nominal size) foundation concrete 1:5:10

inside plaster 15 mm. thick with cement

mortar 1:3 finished smooth with with a floating

coat of neat cement on walls and bed

concrete etc. complete.[III] Inside dimensions

600mm.X 850mm. & 450mm. deep for pipe

line with three or more inlets.

213 Providing and fixing Dry Powder Type ( 1.00 3636.00 Nos

Stored Pressure ) portable fire extinguisher as

per Indian Standard Approved IS code

214 Providing and fixing CO2 Type portable fire 1.00 3636.00 Nos

extinguisher as per Indian Standard Approved

IS code No.2878:2004 ( A ) 4.50 Kg.

215 Providing and fixing nano white korian stone 1.00 5656.00 Smt.

for wash basin and various area.

216 Providing and fixing concealed center point to 1.00 170.36 Rmt

wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

seal for potable water of following dia.

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete.[A] 15 mm.(A) 15 mm

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

217 Providing and fixing concealed center point to 1.00 208.80 Rmt

wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

seal for potable water of following dia.

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete.[A] 15 mm.(B) 20mm

218 Providing and fixing concealed center point to 1.00 253.83 Rmt

wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

seal for potable water of following dia.

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete.[A] 15 mm.(C ) 25mm

219 Providing and fixing concealed center point to 1.00 338.24 Rmt

wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

seal for potable water of following dia.

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete.[A] 15 mm.(D) 32 mm

220 Providing and fixing concealed center point to 1.00 447.73 Rmt

wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

seal for potable water of following dia.

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete.[A] 15 mm.(E) 40mm

221 Providing and fixing concealed center point to 1.00 660.59 Rmt

wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

seal for potable water of following dia.

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete.[A] 15 mm.(F) 50mm

222 Providing laying (to level or slopes) and 1.00 1400.96 Rmt

jointing reinforced concrete Light duty non-

pressure pipes I.S. class NP2 of the following

internal diameter with collars and butt ends

prepared for collar joints including testing of

joints complete.(G) 600mm

223 Providing laying (to level or slopes) and 1.00 2212.25 Rmt

jointing reinforced concrete Light duty non-

pressure pipes I.S. class NP2 of the following

internal diameter with collars and butt ends

prepared for collar joints including testing of

joints complete.(H) 900mm

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Total Amount

(with brief specification and reference to Quantity Unit Total Amount

No. figures

book of specifications)

224 Supplying and planting Digging semi carpet 1.00 60.60 Smt.

lawn at distance of abour 15 cm x 15 cm after

proper anti termite terament and rolling the

same by hand roller and watering etc

225 Providing , and Supplying& fixing Sprinkler for 1.00 1212.00 Nos

fountain watering to lawn.

226 Providing & Fixing Various types of plants 1.00 22.22 Nos

having average height of 0.50 feet

227 Providing & Fixing Various types of plants 1.00 26.26 Nos

having average height of 1.00 feet

228 Providing & Fixing Various types of plants 1.00 80.80 Nos

having average height of 2.00 feet

229 Providing & Fixing Various types of plants 1.00 161.60 Nos

having average height of 4.00 feet

230 Providing & Fixing Various types of plants 1.00 272.70 Nos

having average height of 6.00 feet

231 Providing & Fixing Various types of plants 1.00 424.20 Nos

having average height more than 6.00 feet

232 Providing & Fixing Various types of Bhaji 1.00 6.06 Nos

233 Providing and fixing wall mixture with crutch 1.00 8080.00 Nos

for arrangmentt of Telephone shower (Square

collection)of approved quality as per detailed

specifications including all necessary

connections & accesiories as per requirement