Loading
Loading…
Loading…
Tender Value
₹5.2 Cr
EMD Value
₹5.2 L
Closing Date
6 Oct 2026, 6:00 pm7d left
Executive Engineer, R & B Division, Godhra
Construction of Kanya Chhatralaya at Halol Ta. Halol Dist. Panchmahal
344143
12 OF 2026-27
Open
Civil Works - Buildings
Works
Panchmahal
2 documents required · 2 mandatory
₹12,000
EXECUTIVE ENGINEER, R & B DIVISION, GODHRA
₹5.2 L
10 Sept 2026
10 Sept 2026
10 Sept 2026
6 Oct 2026
10 Sept 2026
No. Figure Amount
Civil works items
1 Excavation for foundation upto 1.50 mt depth including sorting out and 1962.00 Cum 117.08
stacking of useful materials and disposing the excavated stuff for all lead
and lift for loose or soft soil.
2 Excavation for foundation depth from 1.5 mt. to 3.0 mt. including sorting 1033.00 Cum 162.38
out and stacking of useful materials and disposing the excavated stuff for
all lead and lift for all sorts of soil.
3 Filling available excavated earth (excluding rock ) in trench plinth side of 1690.00 Cum 130.39
foundation etc. in layer not excluding 20 cm in depth consolidation each
deposited layer by ramming and watering etc. complete
cm thickness including watering, ramming and consolidation etc.
5 Filling in foundation and plinth with sand in layers of 20 cm. thickness 365.00 Cum 460.19
including watering ramming and consolidating etc. complete.
6 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 218.00 Cum 2843.15
machine crushed stone aggregate 40 mm nominal size) and curing
complete excluding cost of form work in foundation and plinth.
7 Providing and laying controlled cement concrete M-150 and curing 169.00 Cum 3971.67
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in foundations, footings, base
of columns, plinth slab and Mass concrete.
8 Providing and laying controlled cement concrete M-250 and curing 373.50 Cum 4429.86
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Foundations, footings, base
of columns and mass concrete.
9 Providing and laying controlled cement concrete M-250 and curing etc. 52.00 Cum 7557.83
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Columns upto plinth level.
10 Providing and laying controlled cement concrete M-200 and curing etc. 59.00 Cum 7501.93
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Columns for Ground floor.
11 Providing and laying controlled cement concrete M-200 and curing etc. 28.00 Cum 7541.04
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Columns for First floor.
12 Providing and laying controlled cement concrete M-200 and curing etc. 11.00 Cum 7580.15
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Columns for Second floor.
13 Providing and laying controlled cement concrete M-250 and curing etc. 291.00 Cum 6066.06
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Ground and plinth beams.
14 Providing and laying controlled cement concrete M-200 and curing etc. 164.00 Cum 5781.18
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Beams for Ground floor.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
15 Providing and laying controlled cement concrete M-200 and curing etc. 62.00 Cum 5820.29
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Beams for First floor.
16 Providing and laying controlled cement concrete M-200 and curing etc. 4.00 Cum 5859.39
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Beams for Second floor.
17 Providing and laying controlled cement concrete M-200 and curing etc. 178.30 Cum 6184.30
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Slabs for Ground floor.
18 Providing and laying controlled cement concrete M-200 and curing etc. 89.00 Cum 6223.41
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Slabs for First floor.
19 Providing and laying controlled cement concrete M-200 and curing etc. 4.00 Cum 6262.52
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Slabs for Second floor.
20 Providing and laying controlled cement concrete M-200 and curing etc. 27.00 Cum 7253.82
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work for Lintels in all floors.
21 Providing and laying controlled cement concrete M-200 and curing etc. 15.40 Cum 6750.84
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work for Chhajjas in all floors.
22 Providing and laying controlled cement concrete M-200 and curing etc. 16.00 Cum 7446.73
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Staircase for all floors.
23 Providing and laying controlled cement concrete M-200 and curing etc. 23.00 Cum 7870.93
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Vertical walls for all floors.
24 Providing I.S.I. Mark T.M.T. bar Fe-500D reinforcement for R.C.C. work 185620.00 Kg. 76.21
including bending, binding and placing in position upto all floor two level
for all floors.
25 Providing & fixing Chicken mesh for joint between brick work & RCC work 336.00 Sq.m. 135.64
fixing with nail & G.I. washer as per director in charge.
26 Providing and laying brick work using common burnt clay building 504.50 Cum 4021.02
conventional type bricks having crushing strength not less than
Kg./Sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement :
fine sand) including the cost of all materials and labour charges etc.
27 Providing and laying brick work using common burnt clay building 386.00 Cum 4289.33
conventional type bricks having crushing strength not less than
Kg/sq.cm. in super structure above plinth level upto floor two level in
cement mortar 1:6 (1 cement : 6 fine sand) for Ground Floor including the
cost of all materials and labour charges etc. complete.
28 Providing and laying brick work using common burnt clay building 109.00 Cum 4329.82
conventional type bricks having crushing strength not less than
Kg/sq.cm. in super structure above plinth level in cement mortar 1:6 (1
cement : 6 fine sand) for First Floor including the cost of all materials and
labour charges etc. complete.
29 Providing and laying brick work using common burnt clay building 10.00 Cum 4370.31
conventional type bricks having crushing strength not less than
Kg/sq.cm. in super structure above plinth level in cement mortar 1:6 (1
cement : 6 fine sand) for Second Floor including the cost of all materials
and labour charges etc. complete.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
30 Providing and laying half brick work using common burnt clay building 465.00 Sq.m. 651.45
conventional type bricks having crushing strength not less than
Kg/Sq.cm in cement mortar 1:4 (1 cement : 4 coarse sand) in super
structure above plinth upto floor two level for all floors including the cost of
all materials and labour charges etc. complete.
31 Providing throating or plaster drip and moulding to R.C.C. Chhajja by 152.00 Rmt. 41.00
making 5mm to 15 mm wide groove as per design etc. complete.
32 Providing 20 mm thick double coat mala cement plaster on interior brick / 2663.00 Sq.m. 276.49
concrete work for plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar 1:4 (1 cement : 4 coarse sand) in rough
finishing and 8 mm thick top coat of cement mortar 1:2 (1 cement :
coarse sand) finished with trowel including scaffolding, curing etc.
complete for Wall Ground floor.
33 Providing 20 mm thick double coat mala cement plaster on interior brick / 990.00 Sq.m. 302.42
concrete work for plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar 1:4 (1 cement : 4 coarse sand) in rough
finishing and 8 mm thick top coat of cement mortar 1:2 (1 cement :
coarse sand) finished with trowel including scaffolding curing etc.
complete for Wall First floor.
34 Providing 20 mm thick double coat mala cement plaster on interior brick / 135.00 Sq.m. 328.36
concrete work for plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar 1:4 (1 cement : 4 coarse sand) in rough
finishing and 8 mm thick top coat of cement mortar 1:2 (1 cement :
coarse sand) finished with trowel including scaffolding curing etc.
complete for Wall Second floor.
35 Providing 10 mm thick mala cement plaster in single coat on brick / 1570.00 Sq.m. 185.82
concrete work for plastering upto floor two level and finished even and
smooth in cement mortar 1:3 (1 cement : 3 sand) for Ground floor.
36 Providing 10 mm thick mala cement plaster in single coat on brick / 629.00 Sq.m. 206.67
concrete work for plastering upto floor two level and finished even and
smooth in cement mortar 1:3 (1 cement : 3 sand) for First floor.
37 Providing 10 mm thick mala cement plaster in single coat on brick / 24.00 Sq.m. 227.51
concrete work for plastering upto floor two level and finished even and
smooth in cement mortar 1:3 (1 cement : 3 sand) for Second floor.
38 Providing 20 mm thick sand faced cement plaster with 1 x 1 cm grooves 2597.00 Sq.m. 351.48
as suggested by this office consisting of 12mm thick backing coat of C.M.
1:3 (1-cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1
cement : 1-sand) for all heights as directed etc. complete.
39 Applying two coats of approved brand acrylic lapy- putty & two coats of 5826.00 Sq.m. 40.59
primer of approved brand and manufacture on new wall surface to give an
even shade including thoroughly brushing the surface free from mortar
dropping and other foreign matter and sand papered smooth for all floors.
40 Wall painting (two coats) with plastic emulsion paint of approved brand 3518.00 Sq.m. 119.42
and manufacture on undecorated wall surface to give an even shade
including throughly brushing the surface free from mortar droppings and
other foreign matter and sand papered smooth.
41 Ceiling painting (two coats) with plastic emulsion paint of approved brand 1477.00 Sq.m. 124.68
and manufacture on ceiling and soffits of slab surface to give an even
shade including throughly brushing the surface free from mortar droppings
and other foreign matter and sand papered smooth.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
42 Wall painting two coats with weather proof acrylic emulsion paint of 2222.00 Sq.m. 313.25
approved brand & manufacture and of required shade on exterior wall
surface to give an even shade over and including a primary coat with
alkaly resistance primer of approved brand after throughly brushing
surface to remove all dirt and remains of loose powdered materials etc.
complete for all height.
43 Providing and fixing machine cut, free edges, blue Kotah stone slab 1525.00 Sq.m. 976.72
flooring 20 mm thick laid on 20 mm thick cement mortar 1:6 (1 cement :
coarse sand) jointed with matching pigment & cement slurry including
rubbing and polishing finishing etc. complete.
44 Providing and fixing machine cut, free edges blue kotah stone slab 102.00 Sq.m. 1121.48
flooring 20 mm thick laid on 10 mm thick cement mortar 1:3 (1 cement :
coarse sand) for skirting & riser including jointed with matching pigment &
cement slurry including rubbing and polishing finishing etc. complete.
45 Providing and fixing machine cut, free edges, polished Granite stone slab 192.00 Sq.m. 2626.00
flooring 18 mm thick laid on 20 mm thick cement mortar 1:6 (1 cement :
coarse sand) for trade & riser including half round moulding front edge of
trade jointed with matching pigment & cement slurry including rubbing and
polishing, finishing etc. complete.
46 Providing and fixing machine cut, free edges, mirror polished Granite 80.00 Sq.m. 2877.49
stone slab 18 mm thick for vertical wall / Doors / Windows Sill, Jams for
cladding as per design including full moulded round inside edge and laid
on 10 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) jointed with
grey cement slurry including rubbing, polishing and finishing etc.
47 Providing and fixing machine cut & polished kota stone in 7.5 cm width 23.00 Sq.m. 1078.28
strip flooring for ramp even grade over 20mm (average) thick base of
cement mortar 1:6 (1-cement : 6 coarse sand) laid over and jointed with
grey cement slurry mixed with pigment to match the shade of slab
including rubbing and polishing etc. complete. (A) 25mm thick
48 Providing and laying Anti skid Ceramic tiles 6mm thick in flooring treads of 113.00 Sq.m. 957.63
steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1
cement : 3 coarse sand) finishing with flush pointing in white cement,
pattern, colour & shade approved by Architect or Engineer in charge
49 Providing and laying coloured glazed tiles of the size 300 mm x 600 mm in 615.00 Sq.m. 1417.36
skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1
cement : 3 coarse sand) & jointed with white cement slurry. Pattern,
colour, size & shade approved by Architect or Engineer in charge.
50 Providing and laying water proofing treatment with china mosaic tiles 1106.00 Sq.m. 1106.96
flooring over avg 50 mm C.C. 1:2:4 bedding for maintaining slope for plain
and curve surface & 12 mm to 20 mm of broken piece not more than
cm of ceramic / glazed tiles (one for more colour as directed) to be laid
over cement mortar bedding of C.M. 1:3 (1 cement : 3 sand) contain water
proofing materials per bag of cement use as specified by manufactured
and slops to be tempered to bring mortar up to surface with using white
cement and colour pigment including rounding of junctions and extending
them up to 15 cm along the wall and curing with bends any patterns or
design as per drawing and cleaning by using oxalic acid etc. complete.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
granite at top and 25 mm thick Kota stone slab with 75 cm height with
necessary support using 20mm thick cement mortar 1:3 for sandwich and
fitting at bottom & edges with waterproof rigid adhesives including making
necessary grooves in walls with vertical support of double kota stone
sandwich every 60 cm centre to centre including all labour material of
approved quality including full moulded round front edge fixed in wall for
partition and jointed with grey cement slurry including rubbing and
polishing etc. complete
52 Providing and fixing machine cut, free edges, pre mirror polished Green 221.00 Sq.m. 1655.39
marble stone slab 18 mm thick (single piece not less than 150 cm) for
vertical wall / Doors / Windows Sill, Jams for cladding as per design
including full moulded round inside edge and laid on 10 mm thick cement
mortar 1:3 (1 cement : 3 coarse sand) jointed with grey cement slurry
including rubbing, polishing and finishing etc. complete.
53 Providing and fixing louvers in G.I. channel 40 x 32 x 5mm size and 190.00 Sq.m. 3878.40
114mm wide G.I. sheet having thickness of 0.55mm & weight not less
than 490 gm/mtr. roll formed to create 84mm wide louver snap fixed on
special shaped G.I channel, channel shall be finished with powder
coating for fix louvers as directed by Engineer in charge.
54 Providing water proofing treatment on sunk slab including cement 112.00 Sq.m. 348.45
concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4 graded stone
aggregate 20mm nominal size) laid in one layer and finished with a
floating coat of neat cement average 50mm thick to prepare slope
including water proofing chemical etc. complete for sunk slab all floor.
55 Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length 42.00 No. 101.91
for sunk slab or as directed by Engineer in charge etc. complete.
56 Providing & fixing Main Door fixed by Zinc coated hinges with double 15.00 Sq.m. 3263.31
shutter of factory made & stamped I.S 12823 grade one type one 35mm
thick solid core melamine faced three layered resin flushed door, having
decorative lamination on both sides & 12mm thick T.W. beading around
the door from Novapan or equivalent company 60 cm long stainless steel
pipe handle on both side SS ASIS 304 Grade, heavy duty floor spring
each side, S.S. Stopper 30 cm, SS aldrop 30 cm both side each shutter,
fixtures & fastenings as directed by Engineer in charge etc. complete. For
57 Providing and fixing Door in Marble frame for durable grip of shutter with 11.00 Sq.m. 2898.70
Double shutter of factory made & stamped I.S 12823 grade one, type one
35 mm thick solid core, melamine faced, three layered resin, flushed door,
having decorative lamination on both sided and "U" type 2mm th. 35mm x
35 mm specially shaped molded colored anodized aluminium beading
fixed around the door,"novapan" or equivalent company holding licence
for minimum 5 years warranty including 30 cm long stainless steel pipe
handle on both side SS ASIS 304 grade, SS stopper 20 cm, SS Aldrop
cm both side, SS hinges 3 Nos. in each shutter & fixtures & fastenings as
directed by Engineer in charge etc. complete for Door. (Marble frame shall
be measured separately)
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
58 Providing and fixing Door in Marble frame for durable grip of shutter with 54.00 Sq.m. 3418.85
Single shutter of factory made & stamped I.S. 12823 grade one, type one
35 mm thick solid core, melamine faced, three layered resin, flushed door,
having decorative lamination on both sided and "U" type 2mm th. 35mm x
35 mm specially shaped molded colored anodized aluminium beading
fixed around the door,"novapan" or equivalent company holding licence
for minimum 5 years warranty including 30 cm long stainless steel pipe
handle on both side SS ASIS 304 grade, SS stopper 20 cm, SS Aldrop
cm both side, SS hinges 3 Nos. in each shutter & fixtures & fastenings as
directed by Engineer in charge etc. complete for Door. (Marble frame shall
be measured separately)
59 Providing and fixing FRP frame size 125 x 65 mm and 35mm thick FRP 78.00 Sq.m. 1211.98
shutter with wood grain raised panneled design finish shutter having extra
reinforcement on sides & edges in gel coat finish. The core of the shutter
& frame is to be filed up with injected polyurethene foam done in situ
alongwith embedded wooden pieces for stiffening & also taking hinges &
fixtures. The whole FRP frame & shutter is to be water proof weather
proof, termite proof & resistance to mild acid/alkali. Rates are to be
inclusive of S.S. hinges with fastener sleeve & alluminium fixtures &
fastenings.
60 Providing and fixing extruded aluminum window having one shutter 90.00 Sq.m. 2266.44
Mosquito net and three shutter glass section extruded aluminum colour
anodized section frame main outer size 127mm x 38.10mm x 1.35mm (@
Wt.1.384 Kg/mt), horizontal Four track member size 122.20mm x
31.75mm x 1.10mm (@ Wt. 1.205 Kg/mt), vertical member of size
122.20mm x 31.75mm x 1.50mm (@ Wt. 1.398 Kg/mt) with sliding
shutters of horizontal member size 40mm x 18mm x 1.29mm (@ wt.of
0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (@ wt.of
0.456 Kg/mt/@ Wt. 0.457 Kg/mt) with 5 mm thick transparent bronze
colour tinted float glass with powder coated aluminum fittings and fixtures
and transparent silicon sealant glass fixing to frame as per details etc
complete for window.
61 Providing and fixing window having one shutter mosquito net and two 31.00 Sq.m. 1710.94
shutter glass section extruded aluminum colour anodized section frame
main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt, horizontal
three track member size 92mm x 31.75mm x 1.30mm, @ Wt.1.07 Kg/mt
vertical member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt
with sliding shutters of horizontal member size 40 mm x 18mm x 1.29mm
@ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm
@ wt.of 0.456 Kg/mt. with 5 mm thick transparent bronze colour tinted
float glass with powder coated aluminum fittings and fixtures and
transparent silicon sealant glass fixing to frame as per details etc.
62 Providing and fixing standard extruded of alluminium section of size 18.00 Sq.m. 1175.56
63mm x 38.10mm x 1.2mm (@ Wt. 0.643 Kg/mt) with colour anodized
alluminium frame for ventilation with louver clips & 5 mm thick frosted
glass as details etc. complete for Ventilation.
63 Providing and fixing standard extruded of alluminium section of size 63.50 5.00 Sq.m. 1525.00
x 38.10 x 1.95 mm, @ Wt 1.094Kg / Rmt with colour anodized alluminium
frame with 5 mm thick transparent bronze colour tinted float glass as
details etc. complete for fix window.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
64 Providing and fixing 90 cm high Stainless Steel railing made from 41.00 Rmt. 3184.53
anticorrosive 304 grade S.S. pipe of 50 mm dia. (16 gauge) as hand rail
with S.S. 304 grade baluster of 32 mm dia (16 gauge) as a vertical
support fixed in RCC slab / steps of stair at 1.2 Mt. c/c including three
horizontal S.S. pipes of 16 mm dia (16 Gauge) at equal distance fixed by
16 mm dia (16 Gauge) S.S. pipe with baluster including accessories as
per detailed drawing as directed etc. complete.
65 Providing, erecting and fixing double coated PVC (I.S.I.) water tank of 12000.00 Litre 3.95
required capacity each with all necessary fittings and connection etc.
complete on terrace as directed.
66 Providing, laying and jointing in true line and level I.S.I. mark 110mm 410.00 Rmt. 835.15
diametre U.P.V.C. (Type B) conforming to IS 13592-1992 with one end
plain and other end socketed with rubber ring & fittings conforming to ISI
14735-1999 of approved make for drainage system pipe line, pipe shall
be jointed with each other with rubber lubricant, pipe shall be fixed on wall
using of PVC clamp of the size 110 mm diametre x 149 mm length x
mm heigh at every 2000 mm center to center or shall be concealed in
walls as directed including necessary fittings such as bends, shoes etc.
including testing of pipes and joints and jointed with adhesive solvent
cement including cost of all materials.
67 Providing, laying and jointing in true line and level I.S.I. mark 160mm 661.00 Rmt. 831.22
diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end
plain and other end socketed with rubber ring, & fittings conforming to ISI
14735-1999 of approved make for drainage system pipe line, pipe shall
be jointed with each other with rubber lubricant, pipe shall be fixed on wall
using of PVC clamp of the size 160 mm diametre x 210 mm length x
mm heigh at every 2000 mm center to center or shall be concealed in
walls as directed including necessary fittings such as bends, shoes etc.
including testing of pipes and joints and jointed with adhesive solvent
cement including cost of all materials.
68 Providing, laying and jointing in true line and level I.S.I. mark 50mm dia. 570.00 Rmt. 195.67
U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by
Engineer in charge. Pipe shall be fixed on the wall with the help of clamp
at every two metre C/C or shall be concealed as directed including
necessary fittings etc. including testing of pipe and joints and fixing the
same with adhesive solvent, including cost of all materials.
69 Providing, laying and jointing in true line and level I.S.I. mark 40mm dia. 233.00 Rmt. 148.12
U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by
Engineer in charge. Pipe shall be fixed on the wall with the help of clamp
at every two metre C/C or shall be concealed as directed including
necessary fittings etc. including testing of pipe and joints and fixing the
same with adhesive solvent, including cost of all materials.
70 Providing laying and jointing in true line and level I.S.I. mark 25mm dia. 340.00 Rmt. 91.84
U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by
Engineer in charge. Pipe shall be fixed on the wall with the help of clamp
at every two metre C/C or shall be concealed as directed including
necessary fittings etc. including testing of pipe and joints and fixing the
same with adhesive solvent, including cost of all materials.
71 Providing laying and jointing in true line and level I.S.I. mark 15mm dia. 290.00 Rmt. 72.65
U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by
Engineer in charge. Pipe shall be fixed on the wall with the help of clamp
at every two metre C/C or shall be concealed as directed including
necessary fittings etc. including testing of pipe and joints and fixing the
same with adhesive solvent, including cost of all materials.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
72 Providing and fixing concealed centre point to wall ceiling & floor I.S.I. 279.00 Rmt. 249.72
mark C.P.V..C (SDR 13.5) Pipe having National Sanitation Foundation
(NSF) seal for potable water of following dia. nominal bore tube fitting and
clamps including making good the wall, ceiling and floor etc. complete
73 Providing and fixing concealed centre point to wall ceiling & floor I.S.I. 163.00 Rmt. 166.86
mark C.P.V..C (SDR 13.5) Pipe having National Sanitation Foundation
(NSF) seal for potable water of following dia. nominal bore tube fitting and
clamps including making good the wall, ceiling and floor etc. complete
74 Providing and fixing Gun metal check or non-return full way wheel valve. 36.00 No. 802.95
(E) 50mm dia.
75 Providing and fixing Gun metal check or non-return full way wheel valve. 24.00 No. 663.43
(D) 40mm dia.
76 Providing and fixing Gun metal check or non-return full way wheel valve. 36.00 No. 420.63
(C) 25mm dia.
77 Providing and fixing ball cock of approved quality as directed. (A) Copper 3.00 No. 189.84
Metal (ii) 50mm dia.
78 Providing and fixing wash down water closet (European W.C. Pan) with 21.00 No. 3776.39
integral P or S trap and PVC dual flush tank with complete fittings
including cutting holes in walls and making good the same connecting the
flush bend with cistern and closet etc. complete including plastic seat
cover and including jointing trap with waste pipe overall size as per the
79 Providing and fixing water closet squatting pan (Indian Type W.C. Pan) 10.00 No. 1579.96
size 580mm integral foot rest type (A) Vitreous china. (I) Long pattern =
White colour including 100mm size P or S trap for water closet squatting
pan including jointing the trap with the pan and soil pipe in cement mortar
1:1 (1 cement : 1 fine sand) with 25mm dia. chromium plated brass half
turn flush cock of approved quality including fixing in pipe line G.I. inlet
connection for flushing W.C. Pan etc. complete.
80 Providing & fixing of first quality flat back washbasin 550 mm x 400mm 15.00 No. 2043.23
size in white colour including with approved sanitary grade material with
C.P. waste coupling, waste pipe, 15mm dia. pillar & stop cock of approved
brand with connection 15mm dia. flexible PVC pipe etc. complete.
81 Providing and fixing Urinal of approved quality including connection with 2.00 No. 1557.35
trap and with integral longitudinal flush pipe. (A) Squatting plate pattern
white earthenware 550mm x 300mm.
82 Providing and fixing screw down bib taps of following size.(B) Brass 84.00 No. 898.90
chromium plated screws down bib tap. (i) 15mm dia. as directed by
Engineer in charge.
83 Providing and fixing brass screw down stop tap. (A) 15mm dia. as 40.00 No. 494.90
approved by Engineer in charge.
84 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet. (A) 19.00 No. 282.16
100mm dia. each.
85 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 72.00 No. 558.36
diameter with jali of the following nominal diameter of self cleansing
design with C.I. screwed down or hinged grating including the cost of
cutting and making good the walls.
86 Providing and fixing Jet spray to connect wall mount W.C. with 1.5 mtr 21.00 No. 308.99
long plc. heavy duty supply pipe with two side male female checknut etc.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
87 Providing and fixing S.W. Gully trap with C.I. grating brick masonry 18.00 No. 1246.92
chamber and water tight C.I. cover with frame of 300 mm x 300 mm size
(inside) with standard weight. [i] square mouth trap (B) 150 mm x 100 mm
size P or R type
88 Providing and fixing C.P. brass towel rail complete with C.P. Brass 29.00 No. 603.19
brackets fixed to wooden plugs with C.P. brass screws (B) 600mm x
89 Providing and fixing 600mm x 450mm Bevelled edge glass mirror of 15.00 No. 833.73
superior glass mounted on 6mm the A.C. sheet or plywood sheet & fixed
to wooden plugs with C.P. brass screws and washers.
90 Providing and fixing in position PVC cowel went to pipes. (C) 160mm dia. 15.00 No. 101.00
as directed.
91 Providing and fixing in position PVC cowel went to pipes. (B) 110mm dia. 15.00 No. 75.75
as directed.
92 Providing and fixing to wall, ceiling and floor 10.0 Kg. F/Cm2 working 310.00 Rmt. 336.24
pressure polythene pipes of the following outside dia. Low density,
complete with special flange compression type fittings, wall clips etc.
including making good the wall ceiling and floor. (G) 110 mm dia.
93 Constructing brick masonry chamber for under ground C.I. Inspection 27.00 No. 3660.76
chamber and bends with bricks having crushing strength not less than
Kg/cm2 in cm. 1:5 C.I. cover with frame (light duty) 455 mm. x 610 mm.
internal dimensions, total weight of cover with frame to be not less than
Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top slab with
1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm.
size) foundation concrete 1:5:10 inside plaster 15 mm. thick with cement
mortar 1:3 finished smooth with a floating coat of neat cement on walls &
a bed concrete etc. complete. (ii) Inside dimensions 500 mm. x 700 mm
and 450 mm. deep for pipe line with one or two inlets.
94 Applying general insecticide pest control treatment to floors, cupboards 1625.00 Sq.m. 50.59
etc including labour material etc. complete. Using Imidacloprid 30.5 SC.
As Per 6113 Part -II (0.075% concentration by mass) is recommended
10.5ml chemical diluted with 5 liters of water application 0.5 liters
chemical/ sqm of surface is recommended as per I.S.
95 Providing and fixing Marble 18mm thick both side mirror polished urinal 2.00 Sq.m. 1126.15
partition with required wall mounting hardware fixed to the wall & marble
as per the drawings and including cutting and making good the walls and
floors wherever required and round open edges etc. complete.
96 Providing and laying (two level or slopes) and jointing with stiff mixture or 130.00 Rmt. 518.84
cement mortar in proportion 1:1, salt glazed stone ware pipes including
testing of pipes and joints etc. complete and providing and laying cement
concrete 1:5:10 (1 cement : 5 fine sand :10 graded stone aggregate
40mm nominal size) bedding for stoneware pipes (166mm Ave. bed
thickness) of following internal diameters with necessary formwork and
curing complete. (B) 150mm dia.
97 Providing and laying (two level or slopes) and jointing with stiff mixture or 240.00 Rmt. 343.52
cement mortar in proportion 1:1, salt glazed stone ware pipes including
testing of pipes and joints etc. complete and providing and laying cement
concrete 1:5:10 (1 cement : 5 fine sand :10-graded stone aggregate
40mm nominal size) bedding for stoneware pipes (166mm Ave. bed
thickness) of following internal diameters with necessary formwork and
curing complete. (A) 100mm dia.
98 Providing, laying (to level or slopes) and jointing reinforced concrete Light 250.00 Rmt. 665.48
duty non-pressure pipes I.S. class NP2 of the following internal diameter
with collars and butt ends prepared for collar joints including testing of
joints complete. (D) 300mm
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
99 Providing and laying in trenches jointing in true line and level I.S.I. mark 100.00 Rmt. 240.38
50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer in charge including necessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive solvent
including cost of excavation & refilling the same with all materials.
100 Providing and fixing Safety Grills of required pattern for windows / door 13213.00 Kg. 109.08
using M.S. polished bars, rectangular CRC pipes of size 50mm x 30mm x
2mm or required at required spacing as per design and hold fast with
coach bolts including one coat of primer and two coats of matt finished oil
painting etc. complete.
101 Providing plinth protection to building including excavation in ordinary soil 297.00 Sq.m. 1289.77
and laying cement concrete 1:4:8 using stone aggregates of 40mm
nominal size in foundation layer 0.10 mt. thick below precast rubber dye
inter locking concrete block 60mm thick with grade of concrete M-200
pneumatic compressed by mechanically pressed and as per approved
design including 75mm sand layer for levelling and filling the joint with
sand in proper line and level etc. complete including providing and fixing
precast concrete kerb stone of grey cement based concrete block 30cm
length, 30cm height and 15cm thick of M-250 grade concrete as per
approved design and including excavation for fixing in proper line and
level, filling the joint with C.M. 1:3 (1 cement : 3 fine sand) etc. complete.
102 Providing and fixing in position 300 mm high, 150 mm wide English / 25.00 No. 909.00
Gujarati letters made from 1.0 mm thick stainless steel sheet as directed
by Engineer in charge with all necessary tools & plants etc. complete.
103 SIGNAGES ON DOOR : Providing and fixing 304 grade stainless steel 68.00 No. 656.50
1.5mm thick brushed steel finish plate fixed on a door using S.S. studs
and with punched (laser cut) lettering carried out on S.S. plate of required
size and text as directed by engineer etc. complete. Size 30 cm x 15 cm
104 Providing and fixing acrylic multilingual Braille (raised dots) 30.00 No. 1528.13
DIRECTIONAL SIGNBOARDS of size 225 x 150mm designed as per
accessibility standards and having 3.5mm thick acrylic base plate with
Upper Case San Serif words made of white acrylic non glare cut out
letters of height 15mm raised not less than 0.8mm above base plate and
the equivalent word written in Hindi with Devanagari non glare acrylic
letters of height 15mm raised not less than 0.8mm above base plate and
having a non-glare acrylic cut arrow pointing in the required direction.
Each signboard to be fixed as per manufacturers specifications on the wall
at the approved location and at a height of 1200mm from FFL complete
as per design / specifications and guidelines as per the entire satisfaction
of the Engineer-in-charge.
105 Providing & fixing tactile layout plan of size 900mm x 600mm as approved 1.00 No. 38380.00
design, made of 3.0mm thick acrylic non glare base plate and non glare
cut out symbols with Braille on which individual facility points, like inquiry,
reception, restrooms, medical room / first aid, cafeteria or breakout area,
lounge, meeting room, conference room etc. present the respective floors
with pictograph wherever needed all in tactile raised by minimum of
1.0mm to 2mm in various colours to make it legible for seniors, partial
vision impaired etc. All the facility names should be in Braille, along with
English or Hindi. The entire block of tactile signs should be mounted on
wall for easy reading. The map to be installed at specified locations and
installed at a height of 800mm from ground level complete in all respect
as per Harmonized guideline & satisfaction of Engineer in charges.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
106 Providing and fixing of acrylic, non-glare, tactile audio pictorial building 1.00 No. 50500.00
layout as per the approved size, design and make, having 3mm thick
acrylic non glare base plate of the approved colour and non-glare acrylic
cut out symbols raised 3mm above base plate and Grade 2/ Grade
Braille to be integral with the sign face and be raised 0.5mm above base
plate. The map to be installed at the specified location as per accessibility
standards, shall be oriented to the position of the viewer and to be
installed at a height of 800 mm from the finished ground/ floor level and
using the necessary hardware specified by the manufacturer and to be
installed up to the height of 800 mm from the finished ground/ floor level
and using the necessary hardware specified by the manufacturer and to
be installed complete as per design/specifications and guidelines as per
the entire satisfaction of the the Engineer-in-charge.
107 Providing and fixing BRAILE INDICATOR OF SIZE 170 MM x 35MM FOR 30.00 Rmt. 808.51
HANDRAILS OF THE APPROVED DESIGN AND MAKE HAVE BRAILE
DOTS RAISED 0.5 MM ABOVE BASE PLATE TO BE INSTALLED AT
SPECIFIC LOCATIONS AS PER DIRECTION OF ENGINEER IN
108 Providing and fixing of conspectus tape 50mm width on of treads in 60.00 Rmt. 1816.99
staircase including cutting pasting etc. as per harmonised guidelines
complete in all respect to the entire satisfaction of engineer in charge.
109 Providing and Fixing Size: L 75mm x W 75mm x H 1200 ; 15 mm thick U 30.00 No. 685.29
shape corner Rubber Reflective Guards with yellow reflective Patti fixing
on RCC/brick surface Including all fitting and material charges & it shall
be Chemical Resistant, Fade Proof, Frost - Heat & Weather Proof, High
Flexural Strength, Highly Durable, Stain Resistance as per detailed
drawing etc. complete as directed by Architect or Engineer in charge.
110 Providing and fixing 15 mm thick 300 mm x 300 mm Tactile Warning Tiles 36.00 Sq.m. 1209.48
(Attention Tiles i.e. Tactile Warning Surface Indicator {TWSI}) of Johnsan
Endura Tac Button Yellow Plus or equivalent make in flooring laid on
mm thick cement mortar 1:6 (1 cement : 6 coarse sand) on new surface
and jointed with cement slurry including finished with flush pointing &
cleaning the surface for all floors as per detailed drawing etc. complete as
directed by Architect or Engineer in charge. These tiles shall be Anti Skid,
Chemical Resistant, Fade Proof, Frost - Heat & Weather Proof, High
Flexural Strength, Highly Durable, Stain Resistance. All Tactile Warning
Tiles meet the specific size and dimension standards as required by
ISO/FDIS
111 Providing and fixing a set of wall mounted 38 mm dia U shaped horizontal 2.00 Per 2671.45
stainless steel collapsible grab bar, 38mm vertical stainless steel fixed Set
grab rail of grade SS 304 from round pipe supported and 75 mm dia 8 mm
thick SS 304 base flange on wall including anchor fasteners, nuts,
accessories as per detailed drawing etc. complete as directed by Architect
or Engineer in charge.
112 Providing and laying and fixing 50 mm thick expansion joint by hydro cell 98.00 Sq.m. 1491.03
semi rigid UV resistance with high performance laminated closed cell
polythene foam joint filler in sheet foam as directed etc. complete.
113 Applying and providing expansion joint sealing system on 100 mm vide 66.00 Sq.m. 4772.00
joint including cleaning of expansion joint by mechanical means provision
of adhesive and flexible membrane with required bond length as per
manufacturer specification and 4mm thick alluminium strip covering with
one side slotted and bolted with suitable system, inclusive of all
manpower, machinery and material as per specification and as directed.
114 Excavation for foundation for depth from 3.0 mt. to 5.0 mt. including 10.00 Cum 174.23
sorting out and stacking of useful materials and disposing off the
excavated stuff upto 50 Meter lead. (B) Dense or Hard soil.
115 Brick bat filling 40mm thick at required depth as per drawing and 26.00 Cum 167.66
specification and direction of Engineer in charge.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
116 Providing 15mm thick cement plaster in single coat on rough side of single 385.00 Sq.m. 215.24
or half brick walls for interior plastering up to floor two level and finished
even and smooth in cement mortar 1:4 (1 cement : 4 sand) with floating
coat of neat cement slurry for Ground floor.
117 Providing cement vata (10 cm x 10 cm size) quarter round in cement 71.00 Rmt. 23.68
mortar 1:1 including neat cement finishing, watering etc. complete.
118 Providing and fixing to wall, ceiling and floor 10.0 Kg. F/Cm2 working 80.00 Rmt. 277.43
pressure polythene pipes of the following outside dia. Low density,
complete with special flange compression type fittings, wall clips etc.
including making good the wall ceiling and floor. (F) 75 mm dia.
119 Providing and fixing in position PVC SWR cowl vent to pipes (B) 75mm 6.00 No. 389.74
dia. as directed.
120 Constructing brick masonry chamber for underground C.I. Inspection 12.00 No. 2932.93
chamber and bends with bricks having crushing strength not less than
35kg/ cm2 in C.M. 1:5 C.I. cover with frame (light duty) 455mm x 610mm
internal dimension total weight of cover with frame to be not less than
Kgs (weight of cover 23 kg and weight of frame 15Kg) R.C.C. top slab with
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10mm
nominal size) foundation concrete 1:5:10 inside plaster 1:3 finished
smooth with a floating cost of neat cement on walls and bed concrete etc.
complete. (i) inside dimension 455mm x 610mm & 450mm deep for single
121 Constructing brick masonary road gully chamber 1100mm x 775mm 16.00 No. 8767.25
including 500mm x 450mm C.I. horizontal grating with frame and vertical
grating complete.
122 Box cutting the road surface to proper slope and camber for making a 341.00 Cum 104.20
base for road work including removing the excavated stuff and depositing
on the road side slope as directed upto 50 Mt.lead.
123 Providing and laying granular sub base in required layer by providing 171.00 Cum 1169.58
coarse graded material grading I using river bed material such as
unscreened gravel (CBR more than 30%) as per table 400-2 of MORT&H
gradation including conveying the materials on site of work and, mixing
and spreading in to grade and camber, watering and consolidation at
OMC with vibratory roller including cost of materials and labour etc.
124 Providing and laying 150mm thick wet mix macadam (W.M.M.) in two 128.00 Cum 2021.01
layers (each layer of 150mm average) using machine crushed black trap
aggregate of 40 to 50 mm size in the material with water OMC in
mechanically mix (pug mill) carriage of mix material by contractor's own
tipper to site of work including laying, spreading and compacting in sub
base, base course on well prepared under base of compacting as per
MORTH specification to achieve the desired density (Mechanically laid).
125 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 86.00 Cum 3690.54
graded brick bat aggregate 40 mm nominal size) and curing complete
including cost of form work in foundation and plinth.
126 Providing and laying controlled cement concrete M-200 and curing etc. 128.00 Cum 4264.22
complete including the cost of form work but excluding cost of
reinforcement for R.C.C. work for Internal Road.
127 Compaction and finishing of cement concrete road by trimix process, 965.00 Sq.m. 73.00
providing extra labour charge for trimix (vaccum dewatering service)
process on cement concrete road surface by using vaccum dewatering
pump floater surface vibrator including making groove 5mm width and
filling with polyvynile polymer and rough finish to surface as per instruction
including leveling etc. complete.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
128 Providing and fixing precast rubber Dye / steel Dye inter locking concrete 1042.00 Sq.m. 686.90
block 60mm thick with grade of concrete M-300 pneumatic compressed /
vibrated mechanically and as per approved design confirming to IS
: 2006 including 35 mm sand layer for levelling and filling the joint with
sand in proper line and level as per guidlines of IRC : SP 63-2018 etc.
129 Providing and fixing precast concrete kerb stone of grey cement based 378.00 Rmt. 361.64
concrete block 30 cm length, 30 cm height and 15 cm thick of M-250
grade concrete as per approved design and including excavation for fixing
in proper line and level, filling the joints with C.M. 1:3 (1 cement : 3 fine
sand) etc. complete.
130 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 72.00 Cum 3039.53
crushed stone aggregate 40 mm nominal size) and curing complete
excluding cost of form work in foundation and plinth.
131 Providing and laying controlled cement concrete M-200 and curing etc. 8.00 Cum 4547.02
complete including the cost of form work but excluding cost of
reinforcement for R.C.C. work in coping.
132 Finishing wall with weather proof exterior emulsion paint on wall surface 823.00 Sq.m. 114.53
(two coats) to give an required shape even shade after thoroughly
brushing the surface to remove all dirt, dust and remains of loose
powdered materials etc. complete.
133 Excavation for foundation upto 1.50 mt depth including sorting out and 20.00 Cum 149.67
stacking of useful materials and disposing the excavated stuff for all lead
and lift for Dense or hard soil.
134 Providing and laying controlled cement concrete M-200 for R.C.C. wall 5.00 Cum 4383.40
caps / coping including the finishing smooth with curing etc. complete
including the cost of form work but excluding cost of reinforcement for
Ground floor.
135 Providing and fixing window having extruded aluminum colour anodized 8.00 Sq.m. 1713.70
section frame main outer size 63.50 x 38.10 x 1.95 mm (@ Wt 1.094 Kg /
Rmt), horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm
(@ wt.of 0.695 Kg/mt), vertical member of size 61.85 mm x 31.75mm x
1.30 mm (@ wt.of 0.659 Kg/mt) with sliding shutters of horizontal member
size 40mm x 18mm x 1.29mm (@ wt. of 0.456 Kg/mt), vertical member of
size 40mm x 18mm x 1.29mm (@ wt. of 0.456 Kg/mt. & @ Wt.
Kg/mt) with 5 mm thick transparent bronze colour tinted float glass with
powder coated aluminum fittings and fixtures and transparent silicon
sealant glass fixing to frame as per details etc. complete for window.
136 Providing 20mm thick Water Proof cement plaster for sunk in single coat 55.00 Sq.m. 225.40
on brick / concrete wall for interior plastering upto floor to level and
finishing even smooth in cement mortar 1:3 (1 cement : 3 sand) and
mixing water proofing materials of approved brand and manufacture in
cement mortar in proportion recommended by the manufacturers for all
137 Providing & laying white glazed tiles 6mm thick in flooring treads of steps 40.00 Sq.m. 847.87
and landing laid on a bed of 12mm thick cement mortar 1:3 (1- cement : 3-
coarse sand) finishing with flush pointing in white cement.
138 Providing and laying white glazed tiles 6mm thick of approved standard 40.00 Sq.m. 946.50
quality in skirting, risers of steps and dedo on 10mm thick cement plaster
1:3 (1-cement : 3 coarse sand) and jointed with white cement slurry.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
139 Providing and laying hand dressed polished blue kota stone slab flooring 58.00 Sq.m. 976.72
over 20mm (average) thick base of cement mortar 1:6 (1 cement :
coarse sand) or L.M. 1.1.5 (1-Lime putty : 1.5 coarse sand) and laid over
and jointed with grey cement slurry including rubbing and semi mirror
polishing with emery stone no. 600 complete. (A) 25mm thick.
140 Distempering (three coats) with oil bound washable distemper of 185.00 Sq.m. 119.42
approved brand and manufacturer and of required shade on wall surfaces
to give an even shade, over and including a priming coat with alkali
resistance primer of approved brand after thoroughly brushing the surface
and other foreign matter and also including preparing the surface even
and sand papered smooth.
141 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having 2.00 No. 958.17
weight not less than 35 Kg.
142 Providing and fixing butterfly valve of IS approved brand (D) 50mm dia. 5.00 No. 858.50
143 Providing and fixing M.S. grills of required pattern in gaps of openings 100.00 Kg. 69.69
including frame work etc. with one coat of red lead paint & two coats of oil
paint etc. complete.
144 Filling around the pipes with murrum including dressing, tampering etc. 111.00 Cum 147.94
145 Providing and construction of Junction chambers of size 0.35 x 0.35 x 17.00 No. 1112.01
0.60 mt. with PCC 1:2:4 at bottom and half brick masonry in C.M. 1:4,
15mm thick cement plaster in C.M. 1:3 and CC flooring of 50 mm thick
including connecting of rainwater pipe as per detailed drawing and as
directed by Engineer in charge.
146 Providing and constructing filter chamber of size 2.06 x 1.21 x 1.20 mt. as 8.00 No. 12148.63
directed with PCC 1:2:4 at bottom and half brick masonry in C.M. 1:4,
15mm thick cement plaster in C.M. 1:3 and C.C. flooring of 50 mm thick,
25-40 mm crushed stone metal and coarse sand including connection rain
water pipes as per detailed as directed by Engineer in charge including
cost of labour and material.
147 Providing water harvesting pit of 2.00 mt x 2.00mt x 4.00 mt. size for water 2.00 No. 33586.54
logging with excavation in any strata upto four meter depth, filling the pit
with B.T. Metal 40 mm in 0.60 mt. depth with 25-40mm kapachi, 0.30 mt.
depth and 2.0 mt. depth with coarse sand in layers including making
P.V.C. line for water inlet etc. as directed with 250mm dia. bore 35 mt.
depth and 150mm dia P.V.C. pipe of 10 Kg.f/cm2 casing with gravel
packing or as directed.
148 Steel work, welded in built up sections framed work including cutting, 21.50 Qtl. 9047.86
hoisting, fixing in position and applying a priming coat of red lead paint
and two coats oil paint. (A) In beams and joists, channels angles Tees,
flats, with connecting plates or angle cleats as in main and cross beams.
Hip and jack rafters, purlins connected to common rafters and the like.
149 Providing corrugated G.I. sheets roofing fixed with galvanized iron J or L 125.00 Sq.m. 727.13
hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washer
or G.I. limpet washer filled with white lead complete including the cost of
purlins, rafters and trusses. (1) 0.80 mm thick sheet.
150 Painting two coats (excluding priming coat) on new steel and other metal 62.50 Sq.m. 95.95
surface with enamel paint, brushing, interior to give an even shade
including cleaning the surface of all dirt, dust and other foreign matter.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
151 Earth work for embankment including breaking clods, dressing with all 1458.00 Cum 164.10
lead and lift and including watering rolling and consolidation of subgrade
in layers at O.M.C. to required dry density including filling the depression
which occur during the process using power roller 8 T to 10 T. (C) from
borrow area within all lead and lift.
152 Clearing and grubbing road land including uprooting rank vegetation, 0.49 Hect. 28393.04
grass, bushes, shrubs, saplings and trees girth upto 300mm removal of
stumps of tress cut earlier and disposal of unserviceable materials. (A) By
Mechanical means in area of light jungle.
Electrical Items
153 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 185.00 Pt. 582.77
(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length, in below type of pipe erected with
6A Modular type switch / bell push & accessories and earth continuity of
following type, erected on PVC / Metallic / Wooden box, single mounting
base frame covered with textured / metallic / white front plate modules
erected on / in wall / ceiling as per pipe erected, with necessary Lamp
holder / ceiling rose / H.D. Connector as directed. (f) with medium class
Rigid PVC pipe and accessories erected concealed in wall / ceiling
complete Cat. III
154 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 68.00 Pt. 291.39
(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length , in below type of pipe erected
with 6A Modular type switch / bell push & accessories and earth continuity
of following type, erected on PVC / Metallic / Wooden box, single
mounting base frame covered with textured / metallic / white front plate
modules erected on / in wall / ceiling as per pipe erected, with necessary
Lamp holder / ceiling rose / H.D. Connector as directed. (f) with medium
class Rigid PVC pipe and accessories erected concealed in wall / ceiling
complete Cat. III W/C Point.
155 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 73.00 Pt. 809.01
both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type of pipe erected with 6A
Modular type switch and hum free EME step type electronic fan regulator
mounted and accessories with earth continuity of following type erected
on PVC / Metallic / Wooden box, single mounting base frame covered with
textured / metallic / white front plate modules erected on / in wall / ceiling
as per pipe erected. with necessary ceiling rose / H.D. Connector as
directed. (f) with medium class Rigid PVC pipe and accessories erected
concealed in wall / ceiling complete.Cat. III
156 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) 3.00 Pt. 612.06
both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type of pipe erected complete
with Modular type switch & 5 pin Plug erected on PVC / Metallic / Wooden
box covered with appropriate front plate modules erected on / in wall /
ceiling as per pipe erected with following type of accessories. [I] For 6A
Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switch
board/mcb db board (f) with medium class Rigid PVC pipe and
accessories erected concealed in wall / ceiling complete Cat. III
157 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) 2.00 Pt. 894.86
both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type of pipe erected complete
with Modular type switch & 5 pin Plug erected on PVC / Metallic / Wooden
box covered with appropriate front plate modules erected on / in wall /
ceiling as per pipe erected with following type of accessories. [II] For 16A
Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.(f)
with medium class Rigid PVC pipe and accessories erected concealed in
wall / ceiling complete Cat. III
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
158 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin 61.00 Pt. 309.06
socket erected on PVC / Metallic / Wooden box, single mounting base
frame covered with textured / metallic / white front plate modules erected
on / in wall / ceiling with following type accessories Cat. III
159 Providing following type of Modular Type Accessories mounted with PVC / 107.00 Ea. 151.50
metallic / Wooden box, single mounting base frame covered with textured
/ metallic/white front plate, modules erected with necessary connections
as per site situation directed by Engineer In charge. (1) One No. SP
Amp. Cat.III
160 Providing following type of Modular Type Accessories mounted with PVC / 107.00 Ea. 151.50
metallic / Wooden box, single mounting base frame covered with textured
/ metallic/white front plate, modules erected with necessary connections
as per site situation directed by Engineer In charge. (2) One No 5 pin plug
161 Providing following type of Modular Type Accessories mounted with PVC / 7.00 Ea. 180.79
metallic / Wooden box, single mounting base frame covered with textured
/ metallic/white front plate, modules erected with necessary connections
as per site situation directed by Engineer In charge. (9) 16 Amp. SP one
way switch Cat.III
162 Providing following type of Modular Type Accessories mounted with PVC / 19.00 Ea. 199.98
metallic / Wooden box, single mounting base frame covered with textured
/ metallic / white front plate, modules erected with necessary connections
as per site situation directed by Engineer In charge. (10) 6/16 Amp.
Universal socket Cat.III
163 Providing following type of Modular Type Accessories mounted with PVC / 12.00 Ea. 410.06
metallic / Wooden box, single mounting base frame covered with textured
/ metallic / white front plate, modules erected with necessary connections
as per site situation directed by Engineer In charge. (14) 6A/ 10A/ 16A/
20A/ 25A/ 32A Double Pole Modular MCB Switch
164 Providing and erecting ISI mark Medium class RIGID PVC PIPES of 630.00 Mtr. 24.24
following size complete to be erected on/in wall or ceiling erected with
necessary PVC fittings & Junction boxes fixed with adhesive solution &
clamps with following dia of pipes, in approved manner as directed (a)
165 Supplying and laying UPVC cable trunking system comprising 85.00 Mtr. 277.75
unplasticised polyvinyl, chloride rigid material with ignition free and flame
proof confirming BS with necessary end caps Internal and external bend,
flat bends, coupler, tee etc. All necessary accessories and measuring of
following sizes (1) 75 mm x 50 mm trunking
166 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 2112.00 Mtr. 104.03
marked stranded Copper conductor wire in following type of pipe to be
erected concealed in /flushed on wall / ceiling, with 1.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of green colour for earth
continuity of following size (A) With medium class Rigid PVC pipe and
accessories (b) 2 wire 2.5 sq.mm
167 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 240.00 Mtr. 140.39
marked stranded Copper conductor wire in following type of pipe to be
erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for earth continuity of following
size (A) with medium class Rigid PVC pipe and accessories (a) 2 wire
168 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 180.00 Mtr. 184.83
marked stranded Copper conductor wire in following type of pipe to be
erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for earth continuity of following
size (b) 2 wire 6 sq.mm
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
169 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 90.00 Mtr. 326.23
marked stranded Copper conductor wire in following type of pipe to be
erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for earth continuity of following
size (h) 4 wire 6 sq.mm
170 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte 92.00 Mtr. 70.70
multi stranded, annealed copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected in existing pipe of
following size (Specifically for control panel, relays, power switchgears,
motor starters & control wiring) with required size of copper lugs, nuts and
bolts if required. (e) One wire 6.00 sq.mm
171 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte 64.00 Mtr. 376.73
multi stranded, annealed copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected in existing pipe of
following size (Specifically for control panel, relays, power switchgears,
motor starters & control wiring) with required size of copper lugs, nuts and
bolts if required. (i) One wire 35.00 sq. mm
172 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 630.00 Mtr. 28.28
kv grade ISI marked copper wires of following size to be erected as
directed. (c) 1.00 Sq.mm 2 core round/ flat PVC sheathed
173 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 194.00 Mtr. 58.58
kv grade ISI marked copper wires of following size to be erected as
directed. (e) 1.50 Sq.mm 3 core round PVC sheathed
174 Providing & erecting Switch board for Computer or electric apparatus 1.00 Ea. 1133.22
consisting of following modular type accessories mounted with PVC /
Metallic concealed/open box with single mounting base frame covered
with textured / metallic / white front plate, modules erected with necessary
connections as directed
1 no. 6A/16A universal plug-switch combined.
3 nos. 6A Switch
3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III
175 Decorative call bell Ting-tong box type 250 volts complete erected 1.00 Ea. 71.71
176 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt 163.00 Ea. 535.30
to 0.5 Watt assembled on single MCPCB, with housing used as a heat
sink shall be made of thick sheet steel conforming to IS: 513/CRCA/
aluminium die cast powder coated and high U.V. & corrosion resistance
with diffuser with company mark/name 160V to 270V, Power Factor more
than 0.9, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy>
lumens/watt, LED LED driver efficiency > 85% (fitting required LM-79 &
LM-80 Certificates) (NOTE: Below description have shown ranges of
wattage capacity between the ranges shown) (A) Tube Light with integral
driver (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet Cat-lll
177 Supplying and erecting led lamps with following wattage capacity of 220 to 64.00 Ea. 112.11
240 voltage, minimum 15000 burning hours life, 500 V in built-surge
protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22
lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser
suitable LAMP holder (ii) 5 to 8 watts Cat-III (Contractor will have to
bound for the replacment warranty for 3 years incase of any deffect. There
has been also special condition provided in the tender form in this regard).
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
178 Supplying and erecting LED street light / Flood light fittings with High 29.00 Ea. 4248.06
power White LEDs wattage of 3 Watt and above assembled on single
MCPCB, efficiency more than 130 lm/w and corrosion free High pressure
die cast aluminum housing with smooth finish powder coated and heat
sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,
with toughened glass with company mark/name engraved or embossed
160 to 270 V,Power Factor more than 0.95, THD < 10%, CCT 3000 K to
5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt. LED
driver efficiency > 85%. (fittings required LM-79 & LM-80 certificates)
(NOTE: Below description have shown ranges of Wattage capacity of LED
the ranges shown) (A) Street Light (IP-65), Surge protection -4KV integral
and Light must have 440VAC line supply with over-voltage protection. (A)
Street Light (IP-65), Surge protection -4KV integral and Light must have
440VAC line supply with over-voltage protection. (ii) 48 - 59 Watts Cat-lll
(Contractor will have to bound for the replacment warranty for 3 years in
case of any deffect. There has been also special condition provided in the
tender form in this regard).
179 Supplying and erecting LED street light / Flood light fittings with High 4.00 Ea. 8201.20
power White LEDs wattage of 3 Watt and above assembled on single
MCPCB, efficiency more than 130 lm/w and corrosion free High pressure
die cast aluminum housing with smooth finish powder coated and heat
sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,
with toughened glass with company mark/name engraved or embossed
160 to 270 V,Power Factor more than 0.95, THD < 10%, CCT 3000 K to
5700K, Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt. LED
driver efficiency > 85%. (fittings required LM-79 & LM-80 certificates)
(NOTE: Below description have shown ranges of Wattage capacity of LED
the ranges shown.) (B) Flood Light (IP-65), Surge protection -4KV
integral and Light must have 440VAC line supply with over-voltage
protection. (vii) (vi) above 160 to 199 watts Cat-lll (Contractor will have to
bound for the replacment warranty for 3 years incase of any deffect. There
has been also special condition provided in the tender form in this regard).
180 Supplying and erecting LED street light / Flood light fittings with High 2.00 Ea. 4096.56
power White LEDs wattage of 3 Watt and above assembled on single
MCPCB, efficiency more than 130 lm/w and corrosion free High pressure
die cast aluminum housing with smooth finish powder coated and heat
sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,
with toughened glass with company mark/name engraved or embossed
160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to
5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED
driver efficiency > 85%. (fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown ranges of Wattage
capacity between the ranges shown) (C) Post Top Lantern LED fitting
comprises of finish cast aluminum spigot and spun aluminum canopy fixed
with opal polycarbonate, pipe arrangement for vertical mounting driver
and accessories wired upto terminal block.IP 65 (ii)32-40W Cat-lll
(Contractor will have to bound for the replacment warranty for 3 years
incase of any deffect There has been also special condition provided in
the tender form in this regard).
181 Pproviding and erecting Approved make Four pole moulded case circuit 2.00 Ea. 6790.23
breaker having breaking capacity ICU of 25 KA. at 415 V,having normal
current rating up to 25 A to 100A. with fixed thermal & magnetic release
suitable to work on A.C. supply 50 c/s. with all internal connections,
spreader tinned copper & complete erected in existing 16 G.M.S. housing.
ICS=100% of ICU only Cat III
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
182 Providing and erecting Approved make Four pole moulded case circuit 5.00 Ea. 8861.74
breaker having breaking capacity ICU of 35 KA. at 415 V. having normal
current rating 125A. with fixed thermal & magnetic release suitable to work
on A.C.supply 50 c/s. with all internal connections, spreader tinned copper
& complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only
183 Providing and erecting Approved make Four pole moulded case circuit 5.00 Ea. 17843.67
breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal
current rating 200A.with variable Thermal & magnetic release suitable to
work on A.C.supply 50 c/s. with all internal connections, spreader tinned
copper & complete erected in existing 16 G.M.S. housing ICS=100% of
ICU only Cat III
184 Providing and erecting Approved make Four pole moulded case circuit 3.00 Ea. 23041.13
breaker having breaking capacity ICU of 35 KA. and above at 415 V
having normal current rating 250A. with variable thermal & magnetic
release suitable to work on A.C.supply 50 c/s. with all internal
connections, spreader tinned copper & complete erected in existing
G.M.S. housing. ICS=100% of ICU only Cat III
185 Supplying & erecting approved make Four Pole 415V change over switch 1.00 Ea. 13353.21
interior for panel mounting with operating mechanism A.C.23 duty
confirming to IS for (E) 250A / 320A Cat-lll
186 Supplying and erecting triple pole & neutral 440V / 500V panel mounting 1.00 Rn.Mtr 1961.42
Copper Busbars with four equal Nos. of electrolyte bus having current
density not more than 1.6 Amp. / sq.mm (Rated current / cross section
area) duly wrapped with colour insulating tape for phase sequence of
following current carrying capacity, erected with necessary bus bar
supports /insulators, main cable socket to each bar, erected in existing
cubical panel with necessary connections. (A) Suitable for 100 Amp.
187 Supplying and erecting triple pole & neutral 440V / 500V panel mounting 2.00 Rn.Mtr 3202.71
Copper Busbars with four equal Nos. of electrolyte bus having current
density not more than 1.6 Amp. / sq.mm (Rated current / cross section
area) duly wrapped with colour insulating tape for phase sequence of
following current carrying capacity, erected with necessary bus bar
supports /insulators, main cable socket to each bar, erected in existing
cubical panel with necessary connections. (B) Suitable for 200 Amp.
188 Supplying and erecting triple pole & neutral 440V / 500V panel mounting 1.20 Rn.Mtr 4909.61
Copper Busbars with four equal Nos. of electrolyte bus having current
density not more than 1.6 Amp. / sq.mm (Rated current / cross section
area) duly wrapped with colour insulating tape for phase sequence of
following current carrying capacity, erected with necessary bus bar
supports /insulators, main cable socket to each bar, erected in existing
cubical panel with necessary connections. (C) Suitable for 300 Amp.
189 Providing and erecting Miniature circuit breaker single pole 6A to 25A 119.00 Ea. 123.22
suitable to operate on 240 V A.C. system and having breaking capacity
KA to be erected in existing box confirming to IS 8828/1996 with ISI Mark
190 Providing & erecting 240 V MCB double pole switch for lighting Load (B 3.00 Ea. 306.03
Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing
box having following capacity (A) 6 to 32 Amp. Cat.III
191 Providing & erecting 240 V MCB double pole switch for lighting Load (B 17.00 Ea. 325.22
Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing
box having following capacity (B) 40 Amp. Cat.III
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
192 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B 14.00 Ea. 702.96
curve) having 10KA breaking capacity & confirms to IS :8828 in existing
box having following capacity (b) 40 Amp. Cat.III
193 Sheets steel powder coated enclosure suitable for incorporating One/Two 8.00 Ea. 176.75
194 Providing and erecting Sheet Steel powder coated MCB distribution board 6.00 Ea. 1492.78
- flush / surface mounted fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house
appropriate nos. of MCBs. (The DBs should be used of same company of
MCB to be used) suitable for (A) single phase incoming and horizontal
single phase outgoing (b) sheet steel double door (IP-43) (iv) 12 way
195 Providing and erecting Sheet Steel powder coated MCB distribution board 3.00 Ea. 2339.16
- flush / surface mounted fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house
appropriate nos. of MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase incoming and single phase
horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel
double door (i) 4 way
196 Providing and erecting Approved make RCCBs conforming to IS: 12640 8.00 Ea. 2166.45
and having sensitivity of 30 mA and Short Circuit withstand capacity of
KA and suitable for operation on single phase 240 V, 50Hz. having
characteristic of quick action & tripping with all advance feature & do not
incorporate any electronic component for following Max. rating erected as
directed (i) 25 Amps. DP Cat. III
197 Providing and erecting Approved make RCCBs conforming to IS: 12640 15.00 Ea. 2458.34
and having sensitivity of 30 mA and Short Circuit withstand capacity of
KA and suitable for operation on single phase 240 V, 50Hz. having
characteristic of quick action & tripping with all advance feature & do not
incorporate any electronic component for following Max. rating erected as
directed (ii) 40 Amps. DP Cat. III
198 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 11.00 Kg. 794.87
199 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 47.00 Kg. 77.77
200 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 10.00 Ea. 368.65
cms. dia. galvanised iron pipe with coupling and buch buried in specially
prepared earth pit complete with necessary 8 SWG earth wire.
201 For using salt and charcoal / coke as required for pipe type earthing. 10.00 Ea. 171.70
202 Supplying & erecting earth pit of minimum bore dia.150mm size approved 7.00 Ea. 4591.46
make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS
3043-1987 made of corrosion free hot dipped G.I. Pipes having Outer
pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of
mm having 200-250 Micron galvanising, connection terminal dia of 12mm
with constant ohmic value surrounded by highly conductive compound
with high charge dissipation suitable for following type of applications with
chamber and heavy duty cover. (A) (approved make OEM has to submit
test certificate including value of earth resistance of installation duly
stamped and signed by agency and officer Incharge has to ensure the
value of earthing resistane mentioned in test Certificate) & having back
filling compound of (B) Inner chemical (CCM Compound)- Resistivity:-
ohm / meter testing as per IEC 62561-2017, Voltage drop :- < 1 volt at no
load & dry form, Sulphar content:- <2% (C) Back fill Compound :- Earthing
compound should be capable to retain moisture for long time necessary
test report must be submitted by Agency. (a) For Electrical Installation up
to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
203 Providing & erecting weather proof, dust & vermin proof, floor mounted 5.50 Sq.Mtr 10468.65
front operated indoor type cubical panel board necessary IP-42 and above
protection as per approval from engineer incharge made from 14 SWG
thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC
M.S.sheet for internal partitions with necessary accesories, supporting
angles / flats channel including cutting, bending, drilling, welding, riveting
with internal partitions & cable alley as per requirements & instruction of
engineer-in-charge with erection of supplied switch gears, BUSBARS,
suitable size of inter connecting PVC copper wire / copper-aluminium
strips, rubber grommets, rib, bakelite control fuses/MCB for measuring
instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,
sufficient nos. of hinged doors, handles with locking arrangement and
rubber gasket, heavy duty end terminal connection,danger notice board,
necessary ventilation, earthing strip complete. The Panel shall be painted
with epoxy powder coating. (The rates excludes the cost of switchgears,
bus bars, inter connecting mains & Copper Aluminium strips, meters,
fuses etc. The dimension shall be measured excluding base beams) The
panel shall be supplied with following approved manufacturers with
following size. (A) locally fabricated panel board (i) with 350mm depth
204 Providing, erecting, fabricating the M.S. structure as per requirement on 85.00 Kg. 77.77
site incorporating proper size of M.S. angles, square, round, flats, bars,
channels, sections complete with cutting, welding, grinding & finishing duly
painted with one coat of red oxide with erection on site as per direction of
engineer in charge with necessary grouting, cementing, plastering &
finishing complete.
205 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 9.00 Mtr. 454.50
multistrand Aluminium conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of following size of cables
(D) 3 1/2 core 70 Sq. mm (35 Sq.mm 1/2 core)
206 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 155.00 Mtr. 589.84
multistrand Aluminium conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of following size of cables (E)
3 1/2 core 95 Sq.mm ( 50 Sq.mm 1/2 core)
207 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 55.00 Mtr. 648.42
multistrand Aluminium conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of following size of cables (F)
3 1/2 core 120 Sq.mm (70 Sq.mm 1/2 core)
208 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable 854.00 Mtr. 151.50
multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of following size of cables (B)
4 core 6 Sq.mm
209 Making trench in soft soil of suitable width of 90 cm deep for laying cable 690.00 Mtr. 55.55
or locating the fault all over the run and back filling the same and making
the surface as normal ground.
210 Supplying following size of Light duty “A” Class G.I. Pipe & erecting as 30.00 Mtr. 300.98
directed by Engineer-in-charge. (B) 50 mm dia
211 Supplying following size of Light duty “A” Class G.I. Pipe & erecting as 30.00 Mtr. 696.90
directed by Engineer-in-charge. (D) 100 mm dia.
212 Providing & laying approved make Double walled corrugated pipes (DWC) 584.00 Mtr. 62.62
of polyethylene (conforming to IS 14930 II) with necessary connecting
accessories of same material at required depth in existing trench for
laying of cable below ground / road surface for enclosing cable (A) 50 mm
outer dia.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
213 Providing & laying approved make Double walled corrugated pipes (DWC) 104.00 Mtr. 137.36
of polyethylene (conforming to IS 14930 II) with necessary connecting
accessories of same material at required depth in existing trench for
laying of cable below ground / road surface for enclosing cable (D)
mm outer dia.
214 Providing and fixing heavy duty flange type brass cable gland with rubber 16.00 Ea. 38.38
ring for PVC insulated armoured cable complete with out going tails,
insulating tape etc. for following size of cables. (B) 2 to 4 core 6 Sq. mm
215 Providing and fixing heavy duty flange type brass double compression 4.00 Ea. 103.02
type cable gland with rubber ring for PVC insulated armoured cable
complete with out going tails, insulating tape etc. for following size of
cables. (C) 3 & 1/2 core 70 Sq.mm
216 Providing and fixing heavy duty flange type brass double compression 4.00 Ea. 131.30
type cable gland with rubber ring for PVC insulated armoured cable
complete with out going tails, insulating tape etc. for following size of
cables. (D) 3 & 1/2 core 95 Sq. mm
217 Providing and fixing heavy duty flange type brass double compression 6.00 Ea. 140.39
type cable gland with rubber ring for PVC insulated armoured cable
complete with out going tails, insulating tape etc. for following size of
cables. (E) 3 & 1/2 core 120 Sq.mm
218 Solder less crimping type Aluminium lugs conforming to IS suitable for 8.00 Ea. 20.20
cable of following size evenly crimped with high pressure tool & connected
to switchgear terminals with brass / cadmium plated nut bolts in an
approved manner. (D) 35/50 Sq.mm.
219 Solder less crimping type Aluminium lugs conforming to IS suitable for 18.00 Ea. 25.25
cable of following size evenly crimped with high pressure tool & connected
to switchgear terminals with brass / cadmium plated nut bolts in an
approved manner. (E) 70 Sq.mm.
220 Solder less crimping type Aluminium lugs conforming to IS suitable for 6.00 Ea. 40.40
cable of following size evenly crimped with high pressure tool & connected
to switchgear terminals with brass / cadmium plated nut bolts in an
approved manner. (F) 95 Sq.mm.
221 Solder less crimping type Aluminium lugs conforming to IS suitable for 28.00 Ea. 45.45
cable of following size evenly crimped with high pressure tool & connected
to switchgear terminals with brass / cadmium plated nut bolts in an
approved manner. (G) 120 Sq.mm.
222 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan 73.00 Ea. 1948.29
with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz
1200 mm sweep complete having 3 blades with aluminium blades with,
canopy & 30 cm. down rod erected with earthing.
223 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. 73.00 Mtr. 108.07
Pipe down rod erected duly painted for fan complete with proper insulation
without leakage and earthing.
224 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to 73.00 Ea. 108.07
the RCC bars up to 50mm length each side and pierced through a
Gauge M.S. box / Heavy Duty PVC box complete erected concealed in
Ceiling with necessary finishing.
225 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or 73.00 Ea. 18.18
226 Supplying & erecting approved make low noise decorative exhaust fan 4.00 Ea. 1683.67
having square frame ABS body with inbuilt lowers & square frame.
250mm with 1350 RPM Cat.II
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
227 Supplying & erecting single phase approved make industrial exhaust fan 21.00 Ea. 2054.34
suitable for medium duty ring mounted low noise operation suitable for
medium duty having following dia size and maximum speed in RPM [A]
305 mm dia 900 RPM Cat.II
228 Supplying and erecting approved make Octagonal pole made from HR 24.00 Ea. 7561.87
sheet steel. The pole should be made as per IS and shall be coated with
hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind
speed with integral Junction box consist of terminal plate of min 6mm
Hylam sheet, standard profile 35mm x 7.5mm Din-Rail for MCB Mounting,
stud type terminal and arrangement for cable termination to be erected
with Suitable foundation (Included) as per details given by manufacturer
considering site requirement. (C) 5 Mtr. Long 70 mm top x 130 mm
bottom dia, 3 mm thickness with 200mm x 200mm x 12mm base plate, 4-
M16 bolts and 600mm long with necessary G.I. J bolts. Approx Pole
weight 46 kg
229 Supplying & erecting approved make SMC press moulded composite FRP 6.00 Ea. 515.10
loop-in, loop-out approx. 2mm thick box complete with Bakelite connector
strip 5way (3P+N+E), DIN rail for mounting mob & hinged doors as per
requirement having locking arrangements with mounting clamp with nuts,
bolts & washers suitable for erection on pole with cable clamps & earth
bolt of following size of box. (B) 250mm x 200mm x 100mm [deep]
230 Supplying and erecting Street light pole bracket comprising main B Class 19.00 Ea 491.87
G.I. pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I.
sleeve tubing of approx. 45cms. length and suitable for
76.5mm/80mm/require size of pole top having nuts and bolts for fixing the
brackets and having spread of 0.5 mtr. Length with 110 deg.with vertical
plane and suitable welded stiffener reducer and nipple with check nut
complete painted with one coat.of Red oxide / PU base primer and two
coats of Aluminium / PU paint. paint with following nos of arms. [A] Single
Arm bracket 0.5 Mtr.
231 Supplying and erecting Street light pole bracket comprising main B Class 5.00 Ea 622.16
GI pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I.
sleeve tubing of approx. 45cms.length and suitable for
76.5mm/80mm/require size of pole top having nuts and bolts for fixing the
brackets and having spread of 0.5 mtr. Length with 110 deg.with vertical
plane and suitable welded stiffener reducer and nipple with check nut
complete painted with one coat.of Red oxide / PU base primer and two
coats of Aluminium / PU paint. paint with following nos of arms. [B] Double
Arm Bracket 0.5 Mtr
232 Supplying & erecting IP 55 grade following size section pillar fabricated 1.00 Ea. 3595.60
from joint less M.S. Sheet with angle iron legs made from jointless M.S.
Angle with cable clamps to be buried in ground to have appropriate
erection to work uniform until erected with cement concrete foundation
and 45 cm high bricks work finishing with plaster etc. hinged double door
internally supported on both side, with internal and outside looking
arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of
Two Nos. one is welded and other with nut and bolt for erecting Bakelite
sheet. Painting the Section Pillar inside and out side with three tank
powder coated paint. section pillar roof should be without joint with water
leakage proof & tested as per IP 55 test & followed by IS 2147 of 1962 (B)
75 x 60 x 45 cm section pillar fabricated from 16 Gauge MS Sheet with
angle iron legs 45 cm long made from 35 x 35 x 5 mm thick MS angle.
233 Supplying and erecting HYLAM sheet on existing angle iron frame.for 1.00 Sq. 1541.26
following thickness (D) 8mm Mtr
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
234 Supplying and erecting nuwood 12 mm thick on existing angle iron frame. 1.00 Sq. 291.89
235 Providing & erecting water cooler having storage capacity 150 Ltr. & 4.00 Ea. 61482.74
cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet
temp. of the water should drop by 15˚C within a hour, The water cooler
should be comprising of hermetically sealed compressor, fan motor,
condensing unit, water tank surrounded by evaporating, coil, thermostats,
relay etc. complete with necessary inlet & outlet connection. The body of
water cooler will be made from Stainless Steel.
236 Supplying & erecting reverse osmosis (RO) water purification system with 4.00 Ea. 77891.20
M.S. powder coated pedestal frame, prefilter housing carbon filter suitable
buster DC pump, auto low & high pressure switches with following size of
LPH capacity & erected as directed [D] 100 LPH with 1 phase / 3 phase
Raw water pump of 500LPH @ 2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi),
Dual media filter 10"x54" - (1 No), Micron cartridge filter 20" x 2.5" ( 1No),
High pressure pump 500LPH @ 10kg/cm2 - (1No - Shimge /CRI /Lubi),
RO Membrane housing with RO membrane of 40*40 - (1No), RO pressure
tube 4" x 1E - ( 1No), 0 - 1200LPH Rotameter -(2 Nos), with Recovery
237 Supplying and erecting horizontal / vertical mounting type storage water 6.00 Ea. 11455.42
heater with copper container housed in M.S./S.S./ABS body insulated with
glass wool / puff complete with heating elements,adjustable thermostats
300C to 850C, indicating lamp, safety valve, fusible plug, etc.complete
erected with coach bolts, nuts. washers & cementation (C) 25 Ltr. with
KW. heating element Premium Category.
238 Supplying and erecting approved make panel mounting type Digital 4.00 Ea. 1275.63
Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected
on existing panel board with all connection, wiring etc. with manufacturers
calibration certificate.
239 Supplying and erecting approved make panel mounting type Digital 4.00 Ea. 1558.43
Ammeter having 3 digits LED display, external CT operated, calibrated for
0 to 1000 Amps suitable to operate on 500 Volt AC, erected on existing
panel board with all connection, wiring etc. with manufacturers calibration
certificate.
AC Supply 500 V on existing panel board with necessary connections.
241 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 12.00 Ea. 274.72
1000/5 ratio 15 VA burden erected in existing CRCA box duly secured
with insulating materials connected to the meter
242 Supplying and erecting approved make suitable panel indicator LED type 12.00 Ea. 43.43
lamp, lens cover, complete erected with necessary connections.
243 Supplying and erecting, commissioning and testing of Diesel Generating 1.00 Each 928258.68
set confirming to IS: 4722:1968 & BS:5514 having continuous rating,
phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed
air/water cooled diesel engine with multi-cylinders developing suitable
BHP not less than following capacity at 1500 RPM with 10% overload for
one hour in 24 hours with standard accessories like fly wheel, lubricating
oil cooler, "A" class governor, heavy duty fuel wheel and lubricating oil
filter, oil bath air filler, lubricating oil pressure gauge, end exhaust
manifold, standard set of tools with adjustable spanners, screw drivers,
cylinder head to cover, joint cylinder head to exhaust, element lube oil
filter, 12 / 24 volts electric starting equipment complete with standard
heavy duty battery, dynamo, cut-outs, ammeter, necessary wiring,
pressure gauge, starter etc and heavy duty Residential type exhaust
silencer and vertical hot air duct both
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
logged with asbestos rope, save oil trays, exhaust piping of required
length, standard wall / floor mounted fuel with level indicator and piping
and drip proof alternator, self excited, self regulated, screen protected,
with excitation system, capable of delivering the rated system output at
415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM,
conforming to IS-4722- 1968 with voltage regulation +/- 5% of rated
voltage from no load to full load. Both the engine and alternator fitted on a
common fabricated steel base plate with antivibration mounting engine
and alternator both connected to each other by flexible flange coupling
and with floor / wall mounted control panel box comprising of voltmeter
indicator lamps duly wired with HRC fuses. The alternator & control panel
shall be connected with provided suitable capacity armoured cable and
complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA
Sheet, sound absorbing material Rockwool of 64 density & 100 mm thick
conforming to IS:8183 / PU Foam of 40 Density - at least 40 mm. The
resin bonded rockwool covered from inside the canopy by perforated
sheet with 3/4 mm holes, sound level not more than 75 dB at a distance of
1 mtr, as per PVCT norms. Erection, commissioning and satisfactory
testing as per requirement with first filling of fuel, oil, etc. with guarantee /
Warrantee of complete system for Two years & with obtaining all
necessary certificate from Electrical Inspector. The Capacity and Ratings
of DG sets are as below. (K) Continuous rating of 82.5 KVA, BHP not less
than 102 BHP
244 Supplying & erecting Amplifier having following specification: 1.00 Ea 13558.24
Power Output :250W (RMS) (300W Max.)
inputs : 6 Misc. & 2 Aux.
frequency Response : 50-1500HZ I3db
Tone Controls : Cut & Boost type
LED Meter : 5 LED Arrays
The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with
automatic changeover from AC to Battery operation, duly protected by
wrong Battery Polarity connections. [Approved by Competent Authority i.e.
not Below the rank of Executive Engineer]
245 Supplying & erecting Booster Amplifier having power output of 25OW 1.00 Ea. 11606.92
(RMS,), suitable to obtain combined power output of two, with 6 mike
inputs & suitable to be used independently as a 250 watt amplifier in
combination with mike & mixer. The booster Amplifier shall be without
mike & Aux. input channels, The system shall be suitable to operate on
24OV. A.C. & 24 Volts D.C. Battery. [Approved by Competent Authority
i.e. not below the rank of Executive Engineer]
246 Supplying & erecting recess wall mounting speaker with 5W rated input 21.00 Ea. 710.03
power 3.3 K. Ohms / 3W impedance, 100 - 10000 Hz frequency response
with 6 inch dia. cone type 8 ohms speakers duly fitted in ABS plastic
cabinet of colour match with wall or ceiling of following size. [Approved by
Competent Authority i.e. not Below the rank of Executive Engineer] (b)
Square shaped 260 x 260mm size speaker
247 Supplying microphones stands with sturdy mechanism, treble free 2.00 Ea 445.41
movement & positioning of microphones, free from rust with superior
quality of chrome plating with following size. [Approved by Competent
Authority i.e. not Below the rank of Executive Engineer] (c) Fixed height
91 cms. & extendable up to 62 cms. with round base of dia. 23 cms.
248 Supplying, installing and testing approved make microphone for All 2.00 Ea. 1284.72
purpose, with frequency response of 100 - 11000 Hz, having sensitivity
2.2mv / Pa & impedance 500 Ohms (LO- Z) supplied with quick
detachable holder, 6 mtr twin core cable & 3 pin XLR connector.
[Approved by Competent Authority i.e. not Below the rank of Executive
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
Total Rs.
i.e. Rs. Five Crore Twenty Three lacs Thirty Seven thousand Eight hundred Twenty Four and Sixty paisa only.
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Net Rs. ___________________________ Total Rs. ________________________
In words ____________________ In words ____________________
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-
Charge for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there
is a change as per actual mix design the cost of difference of cement consumption have been deducted from the
rate of original item at the rate of input rate mentioned in all the tender.
5. The Contractor will have to submit the all required mix design at his own cost before execution as
directed and to be approved from the Engineer in charge.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and
Executive Engineer
R & B Division,
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
STD SPECI.pdf
BOQ.pdf
Drawings.pdf
Electrical.pdf
GRs.pdf
SBD.pdf
SCH OF TEST.pdf
SPECI.pdf
NIVIDA.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .