TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR OFFICE OF THE RAJKOT URBAN DEVELOPMENT AUTHORITY (RUDA), RAJKOT.

Doors, windows with grill, ventilators, glazing, louvers, fix glass, window with top louvers etc. (wood of steel) shutters, including frame/ chowkhats, architraves, holdfasts and other attachments Removal manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable and stacking them within all lead and lift from any height, all type of tools, tackles, scaffolding etc. complete as per instruction of Architect/EIC.

Dismantling all types of floors / wall tiles /cladding/ skirting laid in mortar/ waterproofing/ bedding cement mortar etc. removal manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable and stacking them within all lead and lift from any height, all type of tools, tackles, scaffolding etc. complete as per instruction of Architect/EIC.

Dismantling of all types of existing partition/ Paneling with fittings etc. removal manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable and stacking them within all lead and lift from any height, all type of tools, tackles, scaffolding etc. complete as per instruction of Architect/EIC.

Demolition AND dismantling of existing brick work, R.C.C. including cutting reinforcement bars. and stone , Brick masonry or any type of structure at any floors including covered with either pointing / plaster or any tiles also incl. etc. removal manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable and stacking them within all lead and lift from any height, all type of tools, tackles, scaffolding etc. complete as per instruction of Architect/EIC.

Removing of dry or existing paint by a washing and scraping and sand papering the wall surface , ceiling surface etc , smooth including necessary repairs to scratches complete. Work complete including all type of tools, tackles, scaffolding etc complete as per instruction of Architect/EIC.

Cutting holes up to 10x10 cm in R.C.C. floors, beams, slabs, and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with nominal reinforcement as required AND EPOXY based water proofing compound for sealing the joints around the pipes up to any depth including finishing complete so as to make it leak proof etc. complete, at all levels The quote shall also include for providing at all heights AND levels. Work complete including all type of tools, tackles, scaffolding etc complete as per instruction of Architect/ EIC.

Carrying out floor treatment for termite control including spraying with chemical solution in oil base including labour and material Using Chlorpyriphos 20 ECAs per IS 6313 part II (1PERCENTAGE concentration by mass) is recommended i.e one litre chemical emulsion diluted with 19 liter oil base. Total solution will be 20 liters inclusive of one liter chemical emulsionapplication at the rate of 7.5 litre chemical / Sqm of surface is recommended as per I.S.

Providing and laying Half brick masonry in common burnt clay building bricks having crushing strength not less than 35 Kg./Sq. Cm. in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure at all floor levels including proper filling of all masonry joints, curing etc. complete. Work complete including all type of tools, tackles, scaffolding etc complete as per instruction of Architect/ Consultant/ EIC.

Providing and constructing Brick work by common burnt clay machine molded With F.P.S.(non modular) bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to all floor level in cement mortar 1:4 (1 cement : 4 coarse sand) including scaffolding, all type of tools, tackles, labour etc complete as per instruction of Architect/ Consultant/ EIC.

Providing AND laying 10 to 12 mm thick Water proof Cement MALA Plaster in single coat on brick/concrete walls for interior/ exterior plastering work at any height AND for all floor level and finished even and smooth mala plaster in cement mortar 1:4 (1 cement :4 sand) including curing, hacking on concrete surface, tools, tackles, scaffolding, Labour etc. complete, as per instruction, detailed AND directed by Architect/ Consultant/ EIC.

Vitrified Flooring : Size 600x600 " Do " as per above specification for complete work. Basic rate of tile is Rs. 80/Sqft.

Single Leaf Glass Door: Providing and fixing in position full height 10mm thick toughened glass STL45 Door System with 6063 T6 grade duly Anodized Aluminum Sections having sizes of 45x55x1.5mm thick, 10 mm Toughened Glass including Assa Alloy Door Closure, Hinges, SS Handle (H Type 450mm), SS Bottom Lock, Thermoplastic Gaskets AND Screw Caps all necessary hardware of as per approved make by Architect. 10mm thick customized clear toughened glasswork complete including all type of material, fittings , fixtures, Finish, loading , unloading , transpiration, all leads ,accessories, sample mockup, all floor , all levels, all heights , necessary frame work, Scafffolding etc complete as per detailed drawings ,specifications AND instruction of Client/EIC.

Double Leaf Glass Door: Providing and fixing in position full height 10mm thick toughened glass STL45 Door System with 6063 T6 grade duly Anodized Aluminum Sections having sizes of 45x55x1.5mm thick, 10 mm Toughened Glass including Assa Alloy Door Closure, Hinges, SS Handle (H Type 450mm), SS Bottom Lock, Thermoplastic Gaskets AND Screw Caps all necessary hardware of as per approved make by Architect. 10mm thick customized clear toughened glasswork complete including all type of material, fittings , fixtures, Finish, loading , unloading , transpiration, all leads ,accessories, sample mockup, all floor , all levels, all heights , necessary frame work, Scafffolding etc complete as per detailed drawings ,specifications AND instruction of Client/EIC.

Single Leaf Flush Door with ply frame and finish with Laminate finish : Providing and fixing in position 40 mm thick or as specified solid core wooden single leaf flush doors of approved make having fire retardant ply facing on both sides and finished with veneer as approved , frame size 100 X 50 MM , polishing work , Hardware system. work complete including all type of hardware, fittings , fixtures, ply frame covering with finish AND polish etc complete as per detailed drawings and specifications. Basic rate of VNR Laminate is 50/Sqft

Interior paint : Providing AND laying of three coats with Royale luxury Emulsion paint of Asian Paint or equivalent approved brand in shades and color as directed on wall/Ceiling surfaces to give an even shade incl. scaffolding to at any height with all labour and material after thoroughly brushing the surface AND making free from mortar droppings and other foreign matter including surface preparation etc. complete. Including cost of all type of tools, tackles, all labour, materials, transportation, cleaning , at all floor, all level, all depth, all Height, all lead and lift , performance warranty certificate etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/ EIC. Sample mock shall be approved from Architect/ EIC. The substrate must be sound, clean, dry, free from dust, oil, grease and laitance etc. All traces of release agents must be removed. On chalky and dusty surfaces, all loose material must be removed by stiff bristle brushing. The primer / paint application is to be done with the rollers. rate shall be including crack filling and leveling as per manufacturers specification.

Gypsum FR/MR Ceiling : 30 Min. M/F Suspended 30min Fire Resistance ceiling includes Gypserra™ or equivalent Perimeter Channel {Material GI(IS513),YS 260Mpa,Finish Galvanized 150GSM(IS27 )} is fixed along the perimeter of existing wall/ partition with the help of HILTI HPS 1 (6x40) impact anchor, at 600mm centers. Gypserra™ Ceiling Angle {Material GI(IS513),YS 260Mpa,Finish Galvanised 150GSM(IS277)} is suspended by fixing it to the Gyproc® soffit cleat {GI(IS513)YS 260Mpa,Finish Galvanised 150GSM(IS277) }. Soffit Cleat and Gyproc® Rawl Plug Ø8x45mm {Material IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load 6.8kN for M30 concrete grade} creating 1220mm x 1220mm grid. Gypserra™ Intermediate channel {Material GI(IS513),YS 260Mpa,Finish Galvanised 150GSM(IS277) } is fixed to the Gypserra™ Ceiling Angle with M6 x 12mm Hex Bolt AND Hex Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material Carbon steel EN ISO 7049/50 Finish Zinc Coating Thickness 4.14micron.} The Gypserra™ Ceiling Section {Material GI(IS513),YS 260Mpa,Finish Galvanised 150GSM(IS277)} is then fixed to the Gypserra™ Intermediate Channel {Material GI(IS513),YS 260Mpa,Finish Galvanised 150GSM(IS277)} with the help of Gyproc® Connecting Clip {Material High carbon spring steel wire(BS970Gr.En42) 46 48HRC,Finish Zinc plating 4 6 micron} and in direction perpendicular to the Intermediate channel at 457mm c/c. Use 50mm thick Rockwool above ceiling for fire insulation, then Single layer of 15mm tapered edge Gyproc FRMR Board as per (EN 520:2004, Type F AND H1.ASTM C1396, Type X) is then screw fixed to ceiling section with 25mm drywall screws {Material Carbon steel EN ISO 7049/50,Finish Case hardened Grey Phosphating} at 230mm centers on ceiling section AND 150mm at periphery of ceiling. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc® Easy fill 90 Jointing compound (Conforms to ASTM C475), Gyproc® Joint Paper tape. Serrated section has effective thickness of 2T ( 2xdepth), better load carrying capacity. The item includes providing and fixing trap door of size 600 X 1200 mm as per approved sample of Ceiling panels comprise of a powder coated beaded steel frame with gypsum / plywood board door. Each panel features a push latch closing mechanism with door retaining safety cable AND hook. Suspenders from ceiling to support the frame and trap door firmly along with necessary hilti fastener, cleats, screws, angles, packing, etc. complete work. Necessary cutting / providing openings in the ceiling for AC fixtures, grills, electrical fittings, or other utility services, hatch openings etc. shall be provided by the Contractor and cost of making such modifications shall be included in the price.

Grid Ceiling: Providing AND Fixing of Eco Friendly Light weight Calcium Silicate Ceiling .Providing and Fixing False ceiling at all heights 100PERCENTAGE Eco Friendly , Non Cementitious light weight calcium silicate false ceiling tiles having having 15 mm thick integral densified edges (for extra Strength ) reinforced with Eco friendly fibers and natural filler with a eco friendly recycled content of more than 50PERCENTAGE ( For Green Building Leed Accreditation) . False ceiling tiles of Size 595x595 mm of approved texture, design and patterns Viz Spin tone/ Cosmos/ Spectra /Globe/Hexa/Quadra having NRC (Noise Reduction coefficient) 0.50 to 0.75 (for semi perforated and fully perforated range of tiles), Light reflectance of 85PERCENTAGE (minimum) . Non combustible as per BS: 476 (part 4), fire performance as per BS: 476 (part 6 AND7 (High Fire resistivity for very high fire safety), humidity resistance of 100PERCENTAGE RH ( Suitable for any weather conditions) , Thermal conductivity of 0.050 W/m°KC to 0.050 W/m°KC as per IS 3346/1980 (High Thermal Insulation). 100PERCENTAGE Antifungal , Antibacterial, Anti termite. The ceiling Tiles should be free from Chemicals, asbestos having Zero VOC Property for better indoor Air quality The tiles shall have average body density of 370 kg/m³ as per ECBC code 2007 and average edge density of 450 Kg/m3. The tile shall be primer coated on both sides and the fair surface shall be having a factory finish in two coats of white dispersion type solvent free paint. The framework shall be suspended from ceiling by slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre The tile shall be laid on 24x38mm wide T section flanges color white having rotary stitching on all T sections, i.e., the main runner, 1200 mm AND 600 mm cross tees with a web height of 38mm AND load carrying capacity of 11 13kgs/Sqm. The work shall be carried out as per specifications, drawing and as per directions of the Engineer in Charge/Manufacturers Specification. Necessary cutting / providing openings in the ceiling for AC fixtures, grills, electrical fittings, or other utility services, hatch openings etc. shall be provided by the Contractor and cost of making such modifications shall be included in the price. No separate charges for cutting / providing opening will be paid. Trap doors with necessary ply frame worktop be provided as required at no extra cost. Work complete as per the detailed drawing and instruction of Architect/EIC.

Providing AND Fixing 5mm. Glass for partetion, Selves, etc. Incl. Required shape edges polishing in Diamond Finish as per Architect Concept, all types of Material, Labour, Transport, Tools, Tolerance etc. complete as per detailed drawing AND Directed by EIC.

Tack Board [Pin up Board or Soft Board] Supplying and fixing Tack board in line and level as per architectural drawing and as directed by engineer in charge. Tack board made of Fabric: Fine Jute Fabric of Color as approved during sampling on the front side. Thickness: of Jute Fabric 1±0.1 mm. The top surface should be smooth, finish, without any wrinkles, fungus proof, terminate proof AND eye catching. The color should not fade even if the Tack board is fixed in direct sunlight position. Soft Board: Thickness: 12mm thick Density of Soft board should be 2.5 kg/m2 with required thick ply back support. Tack board with plywood to be fixed to wall/partition with suitable size SS Screws or equivalent Two way adhesive tape or with adhesive in such a way that screws are not visible from the front side of Tack board as per drawing and as directed by engineer in charge.

Laminate finish partition : Providing fabricating AND Fixing low hight or full Height Partition Box type Partition with installation up to ceiling or beam bottom as per drawing and made with both side laminated 12mm. thk Ply wood at all side The frame work shall be made from square hollow aluminum anodized section size of 50x50x1.5 mm AND 25x50x1.5 mm of approved make conforming to IS code. The framework shall be fixed as per drawing vertically 600 mm c/c AND horizontal 600 mm c/c horizontally or as per detailed drawing with installation up to ceiling or beam bottom as per drawing. All Proof as per IS:710 Ply on both Side of 12mm.thk., All Proof as per IS:710 Plywood frame with Necessary support arrangement to erect the partition from main ceiling or slab as per design) Necessary Cut Out pivoted For door AND Window, vision panel, make hole/face plate for conduit pipes of electrical / networking cables with operable stud from partition Including all materials and labour etc. Complete as per design and instructions by Architect / Engineer In charge Work complete including all type of material,fittings , fixtures, Finish, loading , unloading , transportation, all leads ,accessories, groove, adhesive ,tape, headless nails, sample mockup, all floor , all levels, all heights etc complete as per detailed drawings ,specifications AND instruction of Client/EIC. only the clear elevation area shall be measured and paid. sample mock shall be approved from Architect/Client. Basic rate of Laminate is Rs. 50/ Sq.ft.

Frosted sparkling glass film : Providing and fixing frosted glass film of approved make Translucent, cast PVC, self adhesive vinyl, special CRYSTAL effect film to reproduce Sand blasting effect on glass with customized designs. MCS warranty of 3 (if exposed to direct sunlight) to 10yrs (indoors) must be endorsed by manufacturer. Rate shall be inclusive plotter cutting design as per Architect/Client suggestion. Contractor shall provide shop drawing for approval of Architect/Client. work complete including all type of tools, tackles, scaffolding etc complete as per suggestion of Architect/Client. If in case any application finishing will not as per satisfaction contractor shall remove all film at their cost. Contractor shall do a sample mock of 5 Sqm minimum of glass film) ,shall be approved from Architect/Client.

Designer Laminate Paneling : Providing AND fixing 12mm thick fire retardant marine plywood as per IS 710:2010 and IS 5509:2000 fixed on frame work finish with 1mm thick designer laminate. The frame work shall be made from square hollow aluminum anodized section size of 50x50x1.5 mm AND 25x50x1.5 mm of approved make conforming to IS code. The framework shall be fixed as per drawing vertically 600 mm c/c AND horizontal 600 mm c/c horizontally. All ply/wooden shall be treated with anti termite treatment . Measurements for paneling work to be recorded up to finished false ceiling level only irrespective of aluminum frame work, which shall be provided from gr. level to RCC slab / beams soffit level. Rates shall also be inclusive of cost of making CNC/engraving /cut outs/ openings for electrical fixtures, tube lights /air conditioners ,grills, diffusers etc AND providing additional sections for strengthening around the openings/cutouts additional support for fixing of patch fittings for doors, making grooves between wall AND board, in filled with termite treated wooden members if required or as per drawing /instruction of EIC. and no extra payment shall be considered for additional sections provided. All curved surfaces, recesses, waffles shall be part of the paneling including open able shutter wherever required area and finished with the same material. Work complete including all type of material, fittings , fixtures, Finish, loading , unloading , transportation, all leads ,accessories, groove, adhesive ,tape, headless nails, sample mockup, all floor , all levels, all heights etc complete as per detailed drawings ,specifications AND instruction of Client/EIC. only the clear elevation area of finished plywood wall paneling with laminate shall be measured and paid. sample mock shall be approved from Architect/Client. Basic rate of VNR Laminate is 50/ Sq.ft

PA Table/Executive officer table unit: Providing and fixing 1800mmx 750mm / 1500mmx 750mm (or as specified in drawing) 1. Top: 19 MM thick 303 BWR ply + laminate top finish + 08mm. thk. inner Laminate + complete. side unit: 900x400 mm " Do " as per above specification for complete work.

Staff Table unit: " Do " as per above specification for complete work. ( Top thickness 25 mm ) Table top : 1200 x 600 x 750 mm (or as specified in drawing)

Reception Table:2000 x 600 x 1050 mm Providing and fixing Reception Table unit consist main Table with pedestal unit with all necessary accessories keyboard, CPU stand , cable manager, etc with all required necessary accessories. Front panel top: 6 mm thick corian envelope with ply structure finish. Working Desk Top: 35 mm th top made from 303 BWR ply with laminate finish. Table front: As per detail drawing and reference image made from ply with VNR laminate glass/Corian with backlit and logo engraving work complete as per detail drawing Vertical support: As per detail drawing and reference image made from 25 mm thick IS 303 BWR ply with Laminate finish. providing and fixing as per requirement of socket and quantity Pop up tabletop electrical WIRE MANAGEMENT BOX SS finish. The work shall be done as per the detailed drawing , specifications, sample approved and as directed by the Architect/Client. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools AND tackles, adhesives consumable hardware AND required SS 304 grade hardware/accessories like Accessories like, Under and Over top Cable raceway with cable manager AND Minimum 4 cable holder, Alluminum, alloyed 10 module electric openable box, soft close flip up, Keyboard Tray, Telescopic CPU. Trolley, monotor Stand as per Architect concept, Soft close Telescopic Channel, grooves pvc edge banding , etc of approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Equivalent to VNR Series Laminate.

storage : Providing and fixing Storage 450mm. in depth which made by all inner surface should be 0.8mm thk liner Laminate of approved shade AND style finished on 18mm. thick, Conforming to relevant IS grade Commercial Plywood, All Shutter AND Top shall be made from 18mm. thick require edge post forming in approved shade with vertical and horizontal surface AND all exposed surface shall be finished with 1m. thk. Laminate of quality, brand AND Shed. AND only additional top made up of 25 mm thk MDF Exterior grade The top has a post formation round edge finish with both side laminate All teakwood bidding should be finished by French semi glossy spray polish or otomotive DUCO Paint as per detail. Including all types of approved make AND Quality S.S. accessories, materials and labour etc. complete as per detail drawing and instruction of engineer in charge. [Elevation Length / Height AND Width shall be measured Depth of storage shall be 450mm. incl. all] All the work complete as per the detailed drawing, mockup sample and instruction of Architect/EIC. Work complete as per the instruction of EIC.

Waiting Sofa (One Seater) : 900(L) x 870 mm (B) x 800 mm (H) comprising up of Solid teak wood with PU semi gloss finished polish. The seat shall 150 mm th 40 density AND back shall be 32 density foam AND finished in Approved fabric upholstery as per the drawing/image and instruction from Architect/EIC all external AND internal exposed woodwork to be finished in PU semi gloss finish polish. .The work shall be done as per drawing , specifications, sample approved and as directed by the Architect and Engineer in charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools AND tackles, approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Rate shall inclusive of providing mockup sample for approval of architect. Basic rate of fabric 800/ Rmt

Waiting Sofa (Two Seater) : 1500(L) x 870 mm (B) x 800 mm (H) " Do " as per above specification for complete work .

Waiting Sofa (Three Seater): 2100mm (L) x 870 mm (B) x 800 mm (H) " Do " as per above specification for complete work .

Chair Type 1A Model * Chair in Lather covered Molded Ply with Head Rest. * Double Cladding. * High Density PU Foam in Seat AND Back. * Chrome Arms AND Cushion on it. * Multi Tilt Mechanism. * Chrome Base AND Gas Lift. Work complete as per the approved sample AND instruction of EIC. Rate shall be inclusive of all materials, loading, unloading, transportation, placing at all floors and for all leads, polishing and all accessories as described in item description.

Chair Type 2A Model * Chair in Lather covered Molded Ply with Head Rest. * Double Cladding. * High Density PU Foam in Seat AND Back. * Chrome Arms AND Cushion on it. * Multi Tilt Mechanism. * Chrome Base AND Gas Lift. Work complete as per the approved sample AND instruction of EIC. Rate shall be inclusive of all materials, loading, unloading, transportation, placing at all floors and for all leads, polishing and all accessories as described in item description.

Chair Type 5A Model * Chair with Molded Ply in Seat and Back. * PU Molded foam on Seat AND Back. * Adjustable Arms with PP cladding. * Chrome Base. * Synchronized Mechanism AND Gas Lift. Work complete as per the approved sample AND instruction of EIC. Rate shall be inclusive of all materials, loading, unloading, transportation, placing at all floors and for all leads, polishing and all accessories as described in item description.

Chair Type 7A Model * Back Frame in Molded Nylon AND PP. * PU Molded Cushion on Seat. * Cushioned Back lumbar Support. * Nylon Mesh in Back with Adjustable Arms with PP Pad * Synchronized Mechanism. * Chrome Base AND Gas Lift. Work complete as per the approved sample AND instruction of EIC. Rate shall be inclusive of all materials, loading, unloading, transportation, placing at all floors and for all leads, polishing and all accessories as described in item description.

Blinds : Providing and fixing as per approved make manual roller blinds with Soltis fabric AND spring drive system with steel ball chain/one touch with speed control action roller blind with end brackets with head ail, components, bottom bar.Color Alu with manual operation and warranty etc as per manufacturer’s specifications. Fabric to be as per approved sample. All the work complete as per the detailed drawing and instruction of Architect/EIC. Soltis 99 Color Alu fabric: 39PERCENTAGE Polyester/61PERCENTAGE PVC with Aluminum Backing. Weight:290 g/sqm, Thickness:0.32 mm, Openness Factor:3PERCENTAGE, Visible Light Transmission (N N): 2PERCENTAGE 4PERCENTAGE, Solar reflection (white) 65PERCENTAGE, Internal Solar Factor (gtot): 0.35 0.48, Tensile Strength (Warp/Weft):160/170daN/5cm,Tearing Strength(Warp/Weft):11/13daN, Fungi static Treatment: Degree 0, Excellent (EN ISO 846 A) Fire Retardancy:B s2,d0/EN 13501 1. All complete as per approval of designer AND instruction of Project Manager. (The mode of Measurement: The size of the blind will be measured from end to end bracket (Left to Right bracket) AND height will be measured from top of the pelmet till the bottom of the bottom bar

Manager's cabin curtain : NANTUCKET (ER) : Supply and installation of Nantucket window shading with2 ½” sizes vanes with Easy Rise Lifting system with light dimming Opacity of a Silhouette window shading consists of sheer front and back facings with fabric vanes suspended between them ( Hunterdouglas make of equivalent.. Sheer cuts the glare and Vanes tilt control the light and privacy levels.Headrail: channel shall measure 81mm wide and 61mm deep with a nominal wall thickness of 1.0 1.2mm AND extruded from 6063 aluminum alloy with powder coated finish. Clutch / Limit Assay : made from high engineering grade plastics and consist of the cord pulley and the limit adjustment and leveling screw :Energy Efficiency a) Open vane UV reduction : 63PERCENTAGE b) Closed vane UV reduction : 98PERCENTAGE .The rates shall be inclusive of installation, material cost, labor, wastage, operating system all tools tackles, scaffoldings, hardware at all floors, all levels and heights, necessary edge binding with approved fabric and thread of color similar to the color of the blinds. Same rate shall be applicable for all heights and for all floors. Maximum size of curtain shall not exceed 4.85 m along the length of the opening and 3.050 m along the height of the opening.AND height will be measured from top of the pelmet to sill bottom lvl.

Item Description

Center Table:750 x 750x 450 mm Providing fixing center Table comprisig from 303 BWR ply framing with laminate finish matching with other furniture with 12mm thick glass top including rubber buffers and SS legs at the bottom of table, , including all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and as directed by the Architect and Engineer in charge.

Side Table:450 x 450x 450 mm Providing fixing side Table comprisig from 303 BWR ply framing with laminate finish matching with other furniture with 12mm thick glass top including rubber buffers and SS legs at the bottom of table, , including all type of hardware, fittings, fixtures , tools , tackles , etc complete as per attached ref image and drawing. The work shall be done as per the specifications, sample approved and as directed by the Architect and Engineer in charge.

Signage's : Providing and fixing signage comprising form ss plate with Vinyl film letter , MDf finish as per instruction of Architect/EIC. Contractor shall submit mock up sample.

Providing and fixing 1.0 TR Hi Wall Mounted Inverter Ac 3 Star

Providing and fixing 1.5 TR Hi Wall Mounted Inverter Ac 3 Star

Providing and fixing 1.8 TR Hi Wall Mounted Inverter Ac 3 Star

All Regrigerant Piping Between Indoor AND Out Door Unit ( Hi Wall )

Control cable between IDUs AND ODU laid in PVC pipe

PVC Drain Pipe With Insulation

Drain Pump