Provn of certain sanctioned B/R and E/M works at CG Complex and Dholewal under GE Ludhiana

Amount

Excavating over areas, exc 1.5 & n exc 3.0 m deep and getting out in soft/loose soil complete all as specified.

Excavation in trencehes n exc 1.5 Mtr wide & N exc 1.5 Mtr deep for foundation and getting out in soft/loose soil complete all as specified.

M&L for hardcore of broken stone boulders of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified.

M&L PCC (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete all as specified.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6 mtr mean radius, built in cement mortar 1:6 complete all as specified.

M&L for formwork to soffits and sides of beam and lintels for rough finished surfaces of concrete flat complete all as specified.

M&L for RCC Nominal Mix, (1:2:4) using 20 mm graded crushed stone aggregate) as in lintels, Beams, cantilevers, bressumers over 1.5 m span complete all as specified.(formwork & reinforcement shall be measured and paid seperately)

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified

M&L for RCC Nominal Mix, type B-1 (1:2:4)(20mm graded crushed stone aggregates)) as in Columns, pillars, piers, posts and struts complete all as specified.

M&L Formwork to sides of rough finished surfaces concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

M&L for RCC Nominal Mix, type B-1 (1:2:4) (20mm graded crushed stone aggregates)) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.(formwork & reinforcement shall be measured and paid seperately)

M&L for formwork to edges of concrete flats as in roof slabs exc 10 but n exc 20 cm wide suspended slabs n exc 200mm thick for rough finished surfaces of concrete flat complete all as specified.

M&L for formwork to soffits of suspended slabs n exc 200mm thick for rough finished surfaces of concrete flat complete all as specified.

M&L for RCC (Nominal Mix, 1:2:4, (20mm graded crushed stone aggregates)) as in slabs supported on walls complete all as specified.

M&L for formwork to chullah hoods chajjas,troughs and similar items including edges of rough finished surfaces complete all as specified.

M&L for RCC (Nominal Mix, 1:2:4, (20mm graded crushed stone aggregates)) as in chajjas complete all as specified.

M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified.

M&L for TMT bars 5mm and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips as in stirrups, spaces and binders complete all as specified.

M&L for rendering 15mm thick on fair faces of brick or concrete surface in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified.

M&L for rendering 15mm thick on fair faces of brick or concrete surface in cement mortar 1:4 mixed with integral water proofing compound finished even & smooth without using extra cementfinished even & smooth without using extra cement complete all as specified. (WPC shall be measured & paid separately)

M&L for rendering 5mm thick on fair faces of brick or concrete surface in cement mortar 1:3 as in ceiling finished even & smooth without using extra cement complete all as specified.

M&L rendering 10mm thick on roof surface in cement mortar (1:3) mixed with water proofing compound finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge. (Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this Schedule).

M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces complete all as specified.

M&L Priming surfaces and applying normal treatment (for moderate conditions) using bitumen primer @ .30 Kg/Sqm applied hot complete all as specified.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified

M&L for applying a two coats of aluminium paint above APP based polymeric membrance laid at site complete all as specified.

Supply only integral water proofing compound (ISI marked as approved).

S&F for Pressed steel frames of size 125X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, sheet thickness 1.25 mm., complete as specified.

M&L for PCC type of B0 1:2:4 of coarse aggregate of size 12.5 mm filling in door frames & hold fast etc complete all as specified

M&L for Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated of second class HW rail and style and thicknes of shutter 35mm .

M&L for Glazed and skeleton shutters of 35 mm of 2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified. Type of wood as approved.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing

M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottomrails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welde/ sealed to the styles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing.

M&L for Box type steel window/ventilator made of ERW tube P-section of size 60 mm x 25 mm single rebated outer frame, comprises glazed skelton of ERW tube P-Section size 50mm x 20mm with one/two Nos open able leaf consisting of two Nos Sach bar of T-section 20x3 mm welded to frame with one or no vertical mullion of ERW box type T Section of size 60mm x 25mm and F1 2mm thick welded/screwed to frame for fixing of glass including fittings and fixtures like handle, Tower bolt, stopper, Cleat, Pintal Hinges, holdfasts etc complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1, all as specified and directed. (a) Holdfast 150mm long of 12mm x 3mm MS flat-04 Nos per window. (b) Handle of Z section 20mm x 25mm, 100mm long-01 Nos per leaf. (c) Z Section stopper 20mm x 25mm, 100mm long-01 Nos per leaf. (d) Cleat 55mm long of hollow square 15mm x 12mm- 02 Nos per leaf. (e) MS pintol hinges size 75mm x 12mm -02 Nos per leaf. Note:- MS guard bars, sheet glass, and painting shall be measured and paid seperately.

Ditto item no 75 but with wire mesh Frame Note: wire mesh shall be measured and paid seperately

S&F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

M&L for 3mm thick Sheet glass, ordinary quality and glazing with silicon sealant in square n exc 0.5 sq.m in each pane complete fixed in repair all as specified and directed by Engineer-in-Charge.

Ditto item no 39 but frosted glass of 3 mm thick complete all as specified.

S&F 100mm size Butt hinges, medium weight, cold rolled mild steel bright finish complete all as specified and directed by Engineer-in-Charge.

S&F in Aluminium handles, cast type, anodised 150mm long complete all as specified and directed.

S&F 150mm aluminium anodised tower bolts of extruded section fixed with screw, complete all as specified & directed by Engr-in-charge.

S&F in Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolts 200 mm complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, 140mm size ,anodised, with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge.

S&F in 300mm,mild steel ordinary rat tail rod pattern springs including roller and roller plate, fixing with screw or welding to chowkhats complete all as specified and directed.

M&L for 75 mm thick cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate) as in sub base of floor complete all as specified.

M&L for machine cut kota stone slab flooring 18-22 mm thick laid over and including screed bed 15 mm thick in CM(1:6) and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing and polishing complete all as specified and directed by engr in charge.

Ditto as item 48 above but in riser of steps, skirting & dado laid over and including 10mm thick cement screed in CM 1:4 complete all as specified and directed by engr in charge

M&L non skid ceramic joint less coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as directed.

M&L for glazed ceramic coloured tiles in vertical surface 300x450x7mm / 450x350x7mm thick, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L 75 mm thick PCC 1:3:6 mix type C2 as in plinth protection and paving finishing cone surface even and smooth without using extra cement all as specified and directed.

M&L for preparation of new plastered ceiling surfaces and applying three coats of whitewash complete all as specified

M&L prepration of newly plastered or pointed surface of walls and applying two coat of cement base paint complete all as specified & directed by Engineer-in- charge.

M&L on newly plastered surface of walls applying two coats of oil bound distemper over a one coat of primer as directed by Engineer in charge

M&L preparation of newly plastered surfaces and applying three coats of white wash complete all as specified.

M&L preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified & directed by Engineer-in- charge.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified & directed by Engineer-in- charge.

S&F Wash down water closet (Pedestal pattern), complete white (including fixing bolts, seat cover) all as specified & directed by Engineer-in- charge.

S&F PVC valve less, syphonic action type low level flushing cistern of capacity 10 Ltrs with inlet, ball valve, float, flush pipe and handle and connection to pipe all as specified .

S&F vitreous china wash basin with vitreous white, flat back, size 550 x 400mm, including cutting for and pinning in ends of brackets or erecting stand and including supply and fixing of waste coupling ,waste pipe 32mm bore and PVC bend all as specified and directed.

S&F Toilet paper holder stainless steel fixed to wall with SS screw all as specified and directed.

S&F Soap dish, stainless steel sheet thickness 1mm, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws all as specified and directed.

S&F curtain rod of 25mm , mild steel, chromium plated with fixing brackets, stops, rollers, finial etc complete all as specified and directed.

M&L Pillar taps cast copper alloy, with capstan heads chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F bib taps 15 mm fancy type , chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F Rotational moulded polythylene water strarge tanks 500 ltr (Cylinderical vertical with closed top cover) hoisted and fixed in position all as per specified in SSR Pt-1 complete all as specified and directed.

S&F 20mm bore tubes medium grade galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F15mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 15mm bore stop valve/angle valve , fancy type with chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15mm bore stop valves/angle valve, fancy type, chromium plated with long shank and cup (concealed type)cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Gun-metal, globe or gate valves of bore 15 mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F Gun-metal, globe or gate valves of bore 20 mm, with iron wheel head, screwed both ends for iron pipe and fixed

S&F 20mm bore brass ball valves, high pressure, with polythylene float and flynut complete , screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F 110 mmPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend of any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend of any radius complete all as specified and directed.

S&F PVC P-Traps for water closets of 110mm bore complete all as specified and directed.

S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n exc 25 thick in soil complete all as specified and directed.

Removal of surplus soil to a distance n exc 50 Mtr and depositing where directed at a level n exc 1.5 Mtr above starting point in soil complete all as specified and directed.

Surface excavation nexc 30cm deep and averaging 15cm deep and getting out in soft/lose soil completed all as specified.

M&L Chequered cement concrete tiles 30cmx30cmx25mm thick including screed bedding 15 mm thick in cement mortar (1:6) set and jointed in neat cement slurry in floors with grey cement and pigments complete all as specified and as directed by Engineer-in-charge.

M&L cement concrete 1:2:4 type B-1 using 20mm graded stone agg as in rounded or chamfered on edges as directed complete all as specified and as directed by Engineer-in-charge.

M&L 150mm bore reinforced concrete pipe class NP3 laid in trenches including jointing & testing complete with collars complete all as specified and as directed by Engineer-in-charge.

M&L cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in bed to 150mm bore drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and as directed by Engineer-in-charge.

M&L cutting existing drain pipe in position including jointing socket end of new pipe to same with packed spun yarn and cement mortar 1:1 internal dia of pipe 150mm bore etc complete all as specified & directed by Engineer-in- charge

M&L for brick work with fly ash old size bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:4) all as specified & directed by Engineer-in- charge

M&L rendering 15mm thick on brick work or concrete surface in cement mortar (1:4) finished even and smooth without using extra cement mixed with liquid water proofing coompound complete all as specified & directed by Engineer-in- charge. Note: WPC shall be measured and paid separately.

M&L PCC (1:2:4) type B-2 using 40 mm graded crushed stone aggregate as in surface channels and drains complete all as specified and as directed by Engineer-in-charge.

M&L precast reinforced cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in manhole covers and the like set in cement mortar (1:4) duly placed on manholes complete all as specified and directed by Engineer-in-Charge.

M&L cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in benching for cover slab, over manholes, bands, copings, bed plates etc incl form work if any and surfaces finished even & smooth without using extra cement complete all as spec

M&L Point wiring concealed type complete with 1.5 sqmm PVC insulated unsheathed and multi stranded copper conductor PVC conduit 20 mm bore with all conduit accessories for one light point controlled by one switch including continuous 1.5 sqmm copper conductor, stranded (green colour, earth), PVC insulated unsheathed earth wire to common earth and connected to earth dolly to be terminated in and including suitable size module boxes/ flush type for housing of module/ flush type (PT) switches/sockets etc complete all as specified and directed by Engineer-in-Charge. Note : Unit rates quoted by contractor shall be deemed to included for cutting chases in walls and making good in cement morter (1:3) and finishing the surface to match with exisiting surface using putty and distemper.

All as per srl item No 96 above but One 5 pin 6 Amps switch socket outlet point on independent board complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 96 above but One 5 pin 6 Amps switch socket outlet point on same board complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 96 above but One celing/Exhaust fan point controlled by one 6 Amps one-way switch and regulator complete all as specified and directed by Engineer-in-Charge.

All as per item No. 96 here in before but 2.5 Sqmm copper conductor wiring with 2.5 Sqmm copper conductor as earth continuity for 15/16 Amps socket outlet on independent board complete all as specified and directed by Engineer-in-Charge.

Supply and fix switch piano flush type white/ivory finish 5/6 Amps,single pole one way complete all as specified & directed by Engineer-in-Charge.

Supply and fix switch piano flush type white/ivory finish 15/16 Amps,single pole one way -ditto-

Supply and fix socket outlet 2 pin 5/6 & 3 pin 5/6 Amp flush type -ditto-

Supply and fix socket outlet 2 pin 5/6 & 3 pin 15/16 Amp flush type -ditto-

S&F Fan step regulator 120W,2 module with box, cover and frame as specified & directed by Engineer-in-Charge.

Supply and fixing of Ceiling rose surface Bakelite AC 220/240 volts, 3 terminals PVC/ polycarbonate complete all as specified & directed by Engineer-in-Charge.

Supply and fixing LED lights fitting(aluminium body) 1x 20W, 4 ft , 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose with flexible pvc conduit complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

S&F building security light fitting LED TYPE 35 watt optic lenses with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 32 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge (Make of light fitting - Havells /Surya /Polycab)

S & F sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 12 ways, 240 Volts, ISI marked, 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge. (Make - Havells / Legrand / indoasian)

S & F MCB single pole 240 volts 5 to 30 Amps complete all as specified and directed by Engineer-in-Charge.

S & F MCB single pole and neutral 240 volts 63 Amps complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor including hanging and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engineer-in-Charge.

Supply and fixing exhaust fan 300mm, 230 V steel body, 5 star rating single phase with connected accessories as blade frame and louvers make complete all as specified and directed by Engineer-in-Charge.

M&L earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion,complete all as specified and directed by Engineer-in-Charge.

M&L XLPE insulated heavy duty electric cable with aluminium conductor 1100 volt grade cross sectional area 16sq mm 2 core complete all as specified and directed by Engineer-in-Charge.

Supply and spreading of fine river sand and gentally punning for laying of under ground cables complete all as specified and directed by Engineer-in-Charge. Note :- Punned thickness 18cm shall be measured for payment.

Supply and laying sub class 'B'common burnt bricks, old size designated 75, laid dry flat with width equal to length of brick & with gaps between the adjucent bricks n.exc 10mm as cover laid over the cable to give mechanical protection to under ground cable complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of GI tubing galvanised light grade of size 50 mm bore with all fittng and fixed complete to wall, floor and ceilling or laid in trenches (for protection UG cables) complete all as specified and directed by Engineer-in-Charge.

M&L for cutting of existing GI pipe line 40 mm bore for making branch connection for 25 mm bore pipe with and including inserting tee of size 40x40x25 mm medium grade and make good disturbed surface complete all as specified and directed by Engr-in-Charge.

Supply and laying galvanised mild steel tubing medium grade 25 mm bore with all fitting,laid in trenches in floor/under road on wall complete all as specified and directed by Engr-in-Charge.

Supply and fix Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete for 25 mm dia bore pipe complete all as specified and directed by Engr-in-Charge.

Material & labour brick masonary valve pit chamber with inner clear dimension 450x450x400 mm suitable for 25 mm Gate valves with PCC (1:4:8) 150 mm thick type D2 for foundation,Brick masonary 230 mm wall in CM (1:4) 15 mm thick including provision of 3 mm thick MS sheet cover and 25x25x3 mm angle frame embeded in coping with two coats of synthetic enamel paint over a coat of red oxide primer with locking arrangements including necessary earth work complete all as specified and directed by Engr-in-Charge.

Supply and installation of 12 Volt 180 AH batteries for UPS maint free, 42 month warranty complete all as specified and directed by Engrineer-in-Charge

Supply and fix structural steel Fe-290 (Grade E-165) suitable size angle and flats for battery mounting stand as per site requirement complete all as specified and directed by Engineer-in-charge.

JAI DURGA CONSTRUCTION COMPANY

PREM CONSTRUCTION COMPANY

M/s R.N Construction Co.