WELCOME MAINTENANCE INCLUDING INTERNAL AND EXTERNAL FINISHES MINOR REPAIRS ESSENTIAL FOR OCCUPANCY ETC. IN CERTAIN OFFRS MD ACCN AT INF JAMNAGAR.

Amount

M&L Preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) and applying one coat of white wash complete all as directed.

M&L Preparation of old surfaces of wall removing nails including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) , filling undulation and holes with putty and applying one coat of oil bound distemper with roller finish on walls etc. Complete as specified and as directed by Engineer-In-Charge.

M&L preparation of old painted surfaces of wood/ wood based materials of any description over 10Cm width or girth and applying one coat of synthetic enamel paint etc. complete all as specified and directed by Engineer-In-Charge.

M&L preparation of old painted surfaces of steel/ iron of any description over 10Cm width or girth and applying one coat of synthetic enamel paint etc. complete all as specified and directed by Engineer-In-Charge.

Taking down cement plaster on brick, stone or concrete surface including racking out joints hacking for key scrubbing down with water to receive plaster a, etc complete all a specified.

M & L rendering 10mm thick in CM 1:6 on walls on fair faces of brick work

Rendering 5mm thick plaster in CM 1: 4 to ceiling, finished even & smooth with using extra cement complete

M & L for preparation of new plastered surfaces of walls by applying alkali resistant primer preparatory to distempering and evenly applying two coats of oil bound distemper (oil emulsion) on walls with roller finish all as specified.

M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash on ceiling etc. complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5Sqm and n exc. 4 Sqm each

Taking down chowkats or frame with shutters (without taking off shutters from the frame) not exceeding 1.50 m Sqm.

Taking down old shutters of any description exc 1.00 Sq.M but not ex 2.00 Sqm each.

S & F 2nd class hard wood plain, solid, straight chowkhats & frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and as directed.)

M&L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S & F for 35mm thick 2nd class hard wood factory made panelled door shutters, plain framed panelled (Two panel) with lock rail & panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and style shall be as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F Factory made 35mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick teak wood leaping on three sides and 25mm thick on hanging sides & French polishing to edging complete all as specified and directed.

M & L 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete

S&F 100mm long Stainless steel (medium grade) anodised hinges all as specified and as directed by Engineer-In-Charge.

S&F 150 mm long Aluminium handles, cast type anodised all as specified and as directed by Engineer-In-Charge.

S&F 150mm long Aluminium anodised barrel tower bolt of extruded section all as specified and as directed by Engineer-In-Charge.

M&L Preparing of new wood or wood based surfaces over 10 cm width and girth and applying two coat of synthetic enamel paint over one coat of pink primer.

S&F coloured aluminium anodised sliding window of 3 track, frame and shutters of section Three Track Frame:- (i)Bottom - 20832 (ii)Top/side – 20831 (c) Shutter:- (i)Bottom – 20847 (ii)Top/Side – 20606 iii)Lock/side – 20737 (iv)Middle – 20750 or appropriate equivalent section fixed with 4 mm thick tinted sheet glass with solar film and rubber gasket and bedding , handles, locking arrangement and aluminium wire mesh, aluminium anodised grill (Grill No. 20) of make 'DECO GRILL' or equivalent approved make including making opening for handle & fittings, fixed with and including aluminium (anodised) channel section 38mm x 12mm x 1.30mm complete all as specified and as directed by Engineer-in-Charge. incl making good jambs, cills etc and including taking down old window complete all as specified and directed by the Engr-in-Charge.

S&F in coloured aluminium anodised adjustable louvered ventilator, with frame of section 63.5mm X 38.1mm X 1.47 mm or higher appropriate equivalent section with aluminium adjustable lovers with 4 mm thick figured/frosted sheet glass with rubber gasket, Aluminium wire mesh aluminium anodised grill (Grill No. 20) of make 'DECO GRILL' or equivalent approved make channel section 38mm x 12mm x 1.30mm complete , handles, locking arrangement etc incl making good jambs, cills etc and including taking down old iron ventilator complete all as specified and directed by the Engr-in-Charge.

M&L for 18/ 19mm thick veneered particle board interior grade solid core general purpose type with decorative veneer on one face and balancing white on other side of type 'BB' fixed with screws to timber frame work as in cup board shutters and shelves and like, including 18/19 mm wide 6mm thick teak wood lipping all around fixed in repairs ,all as specified and directed

S&F in repairs 2nd class hardwood plain fillet square rectangular in section wrought sawn secured with screws exc 13 & n exc 25 sqcm in section all as specified and as directed by Engineer-In-Charge..

S & F in repair stainless steel wire cloth 0.36mm dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed by Engineer-In-Charge.

Hacking out old broken glass (any thickness, size, any description from wooden / metal frame incl glazing pins and beadings and S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each pane all as specified and directed by Engineer-In-Charge.

S & F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 140mm, complete all as specified and as directed.

S&F in repair 25mm dia stainless steel superior quality curtain rail, cut in required length and size to fit with opening incl fixing on existing bracket with necessary screws fitted on bracket and decorative nobs on sides with necessary arrangement complete all as specified and as directed by Engr-in-charge.

S&F in repairs curtain rod side brackets of stainless steel, angular or cantilever type fixed to wall with 02 no's screws on each bracket and fitted screws for fixing curtain rod incl CP/stainless steel carved decorative design plain metal colour nobs with fixing arrangement for curtain rod using a screw complete all as approved and shown by Engr-in-charge.

S&F inrepair Aluminium anodised barrel tower bolts, 100 mm long, of extruded section, complete all as specified and as directed.

S&F inrepair 100 mm long aluminium alloy hinges, cast type anodized complete all as specified and as directed.

S&F inrepair 125 mm long extruded aluminium alloy handles, fabricated type anodized. complete all as specified and as directed.

S&F False ceiling work comprising GI frame work of size 605 x 605mm, for seamless celling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx. 900mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thickness having knurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and 4mm thick Non asbestos fibre cement building boards (E-boards) fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling , including taking down old false ceiling including frame work and hangers, complete all as specified and as directed.

S &F Vitreous China wash hand basin white flat back, size 550mm x 400mm, cutting for and pinning in ends of brackets Including waste pipe, brass coupling, 32 mm bore chromium plated brackets, restoring all connections, fixed in repairs, all as specified and as directed by Engineer-In-Charge.

S & F low level PVC valve less, symphonic action type flushing cistern, white with inlet, ball valve float, and handle including brackets, flush pipes to pedestal pan including all joints , fixed in repairs all as specified and as directed by Engineer-In-Charge.

S & F in repairs 1S&F Fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch screwed down fixed in repair / replacement complete all as specified and directed. Make: Jaquar Model No. CON-107KN or equivalent model of make specified in Appx 'B' herein before.

S&F Angular stop valve brass 15mm bore, Capstan head chromium plated, with wall flange, fancy type screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe, fixed in repairs complete all as specified and directed. Make: Jaquar Model No. CQT-23059 or equivalent model of make specified in Appx 'B' herein before.

S & F in repairs vitreous china wash down water closet, Pedestal pan and trap (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe etc, including Plastic water closet seat , black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, including making good to floor all as specified and as directed by Engineer-In-Charge.

S & F in repairs PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent etc. making good floor with matching specifcation all as specified and as directed by Engineer-In-Charge.

S &F in repairs 15mm bore PVC connection pipe 450mm long with PTMT nuts all as specified and as directed by Engineer-In-Charge.

Supply and fix inrepair Health faucet with flexible pipe (ABS body) with 01 meter long PVC tube & wall hook Make Jaquar Model No ALD-chr-583 or equivalent in Crab Tree or Kohler brand complete all as specified and as directed.

S&F in repairs Wall Mixer 3 in 1 system, with provn.of both hand shower and overhead shower complete with 115mm long bend pipe and wall flange(without hand and overhead shower), all as specified and as directed by Engineer-In-Charge. Model Jaquar COP-CHR-119PM or eq model of make specified

S&F in repairs Central Hole Basin Mixer, cast copper alloy,chromium plated, including taking down old unservicable one, all as specified and as directed by Engineer-In-Charge. Model Jaquar CON-CHR-167KNB or eq model of make specified

Brass chromium plated shower rose 120mm size and 15mm dia with swivel joint and arm including fixing to steel pipe or union complete fixed in repairs,complete all as specified and directed. Make: Jaquar Model No. OHS-1789 & SHA-477 or equivalent model of make specified in Appx 'B' herein before.

S&F in repairs single towel rail 600mm long fixed with and including Chromium plated brass screws and wooden /plastic cleats complete all as directed by the Engr-in-Charge. Cat No Towel Rail ACN-CHR-1111SM Jaquar or equivalent model of make specified in Appx 'B' herein before.

S&F in Repairs Soap dish fancy type all as specified and as directed by Engineer-In-Charge. Cat No ACN-1131N of Jaquar or eq model of make specified

S&F in repairs CP corner glass shelf with bracket fixed with screws complete all as directed by the Engr-in-Charge.

Supply, lay, connect and test GI tubing ,medium grade with all fitting, fixed to walls, floors, ceiling etc. complete of size 15mm bore, Fixed in repairs, complete all as specified and as dirceted

Supply, lay, connect and test GI tubing ,medium grade with all fitting, fixed to walls, floors, ceiling etc. complete of size 20mm bore Fixed in repairs, complete all as specified and as dirceted

Supply, lay, connect and test GI tubing ,medium grade with all fitting, fixed to walls, floors, ceiling etc. complete of size 25mm bore Fixed in repairs, complete all as specified and as directed

Arif construction

VINUBHAI P. CHANDRA

S H CONSTRUCTION

fakhrie apostrical

lakhanibrothers

Rameshwar Enterprise