Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.6 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST TENDERER | |
| 2 | L2₹48.6 L+₹3.9 L (8.65%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹57.3 L+₹12.6 L (28.1%)Rejected-Finance KATTUPADATH H AZHEEKAL PO VYPEEN 682508 | KOCHI | ERNAKULAM | KERALA | 682508 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | Rejected-Technical KUMMAMKULAM HOUSE KADAVANTHRA KOCHI 682 020 | ERNAKULAM | KERALA | 682020 | - | Rejected-Technical Rejected due to more residual work load |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
14 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(NW)KOCHI
GARRISON ENGINEER (NW) MILITARY ENGINEER SERVICES NAVAL BASE POST -682 004
AS PER BOQ AND TENDER DOCUMENT
2022_MES_564972_2
8173_GE_NW
Open Tender
Civil Works
Item Rate
330 days
KOCHI
AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
GE(NW)KOCHI
₹99,800
Yes
27 Feb 2023
28 Dec 2022
16 Jan 2023
28 Dec 2022
14 Jan 2023
2 Jan 2023
28 Dec 2022 - 7 Jan 2023
Amount
Taking down cement plaster on Brick/Concrete wall and ceiling including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
M&L for cement plaster in two coat 8 mm thick in cement mortar 1:4 with WPC over 12mm in cm 1:6 on external surfaces finished even & smooth without using extra cement complete all as specified and as directed. Note: WPC shall be measured and paid separately. Dosage shall be as directed by the Manufacturer.
M & L for 5 mm thick rendering in cement mortar 1:3 on fair faces of ceiling surfaces finished even and smooth complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 10mm thick on brick or concrete wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
Supply only Liquid water proofing compound .
M&L for Complete removal of existing treatment on external surfaces of wall by mechanical means by scraping down and washing with water and filling the cracks properly and making good damaged plastered / RCC surface using cement mortar / PCC all as specified and as directed by Engr-in-charge.
M&L for Two coats of weather proof paint (Apex ultima protek or equivalent approved manufacturer) over one coat of primer over and including 1.5mm to 2mm thick exterior wall care putty over one coat of sealant base coat complete all as specified and as directed. Note:- Application of sealant coat, primer , putty and weather proof paint shall be executed as per manufacturers instruction. Painting shall be done through authorized applicator of approved manufacturer
M&L for preparation of new decorated surfaces of ceiling and applying three coat of white wash complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of new decorated surfaces of new wall surface and applying three coat of white wash complete all as specified and as directed by Engr-in-Charge.
M&L preparation of new plastered surfaces of wall (plastered or unplastered) including cornices and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old decorate surfaces of walls including cornices (plastered or unplastered) and applying one coat of white wash complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old decorate surfaces of ceiling (plastered or unplastered) and applying one coat of white wash complete all as specified and as directed by Engr-in-Charge.
M&L preparation of old decorated surfaces of walls (plastered or unplastered) including cornices and applying one coat of colour wash complete all as specified and as directed by Engr-in-Charge.
M&L preparation of old decorated surfaces of walls (plastered or unplastered) including cornices and applying one coat of distemper oil emulsion complete all as specified and as directed by Engr-in-Charge.
M&L complete removal of old decorated surfaces of walls (plastered or unplastered) including cornices preparation and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and as directed by Engr-in-Charge.
M&L for applying 3mm thick wall care putty on old and new plaster surface of wall complete all as specified and as directed by Engr-in-Charge.
M&L preparation of old decorated surfaces of walls (plastered or unplastered) including cornices and applying one coat of cement base paint complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old painted wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one finishing coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old decorated surfaces of wood and applying one coat of french polish complete all as specified and as directed by Engr-in-Charge.
M&L for writing letters of figures (BLOCK, ROMAN, ITALIAN OR INDIAN) n exc 30cm high all as specified and directed by Engr in Charge. Note : Writing shall be done with thick paint so that they stand out boldly.
Material & Labour for preparation of old external surfaces of wall and applying one coats of Premium acrylic emulsion paint, Alkali & fungal resistance, dirt resistance exterior paint of required shade complete all as specified and as directed by Engr-in-Charge.
M&L preparation of old painted plastered surfaces of any description over 10cm width or girth and applying one coat of plastic emulsion paint complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old decorated surfaces of wood or wood based material exc 10cm width or girth and applying one coat of synthetic varnish as finishing coat complete all as specified and as directed by Engr-in-Charge.
Repairs to shutters of any description not exceeding 1.0 Sqm without taking down, including resecuring or easing and adjusting in same opening.
Repairs to shutters of any description exceeding 1.0 Sqm and not exceeding 2 Sqm without taking down, including resecuring or easing and adjusting in same opening.
Taking down chowkats with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm complete all as specified and as directed by Engr-in-Charge.
Taking down chowkats with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm.
Taking down Shutters of any description n.exc 1 sqm each complete all as specified and as directed by Engr-in-Charge.
Taking down Shutters of any description exc 1 sqm but n.exc 2 sqm each
S&F mild steel hold fast, clamps plain angle cleats and similar small articles confirming to Fe-410-0 or Fe-310-0, complete all as specified and as directed.
S&F 2nd class hard wood plain, solid, straight chowkat and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.
S&F 2nd class hard wood 30mm thick glazed, gauged and Skeleton window / ventilator shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass,gauze,etc, size of members of shutters as specified in SSR Part I, Section 8,ciause 8.24(b).
S&F 2nd class hard wood 30mm thick glazed, gauged and Skeleton window / ventilator shutters, open rebated and prepared to receive glass,gauze etc with sash bars any numbers edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass,gauze,etc, size of members of shutters as specified in SSR Part I, Section 8,ciause 8.24(b).
S&F 35mm thick second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Part I-2009 section 8 clause 8.24 (a) and as directed.
S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortise locks, latches or other fittings complete.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing shown in SSR Part II..
S&F in repair mild steel 375mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolt extruded section of 200 mm long complete all as specified and as directed..
S&F in repair Aluminium anodised barrel tower bolt extruded section of 200 mm long complete all as specified and as directed..
S&F aluminium anodised barrel tower bolt extruded section of 150 mm long.
All as per item No 42 here-in-before but fixed in repairs
S&F aluminium anodised barrel tower bolt extruded section of 100 mm long complete all as specified and as directed..
All as per item No 44 here-in-before but fixed in repairs
S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
All as per item No 46 here-in-before but fixed in repairs.
S&F Butt hinges medium weight cold rolled mild steel powder coated with mild steel hinges pin for 100mm size complete all as specified and as directed..
S&F Butt hinges medium weight stainless steel with mild steel hinges pin for 75mm size.
S&F butt hinges medium weight cold rolled mild steel powder coated with mild steel hinges pin for 75mm size complete all as specified and as directed..
S&F extruded aluminium alloy handles fabricated type anodised 150 mm size.
All as per item No 51 here-in-before fixed in repairs.
S&F Extruded aluminium alloy handles fabricated type anodised 125 mm size complete all as specified and as directed.. .
S&F extruded aluminium alloy handles fabricated type anodised 100 mm size complete all as specified and as directed.. .
All as per item No 54 here-in-before but fixed in repairs.
S&F aluminium plate type II gate and shutter hooks and eyes of 200mm size complete all as specified and as directed..
S&F tubular towel rail 20mm dia brass chromium plated with brackets fixed in repairs 60cm long complete all as specified and as directed.. Make : -Parry ware Cart part No.T6901A1 or equivalent to Hind ware/Cera
S&F in repair door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in repair in floor, 140mm over length of cover plats.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed .
All as per item No 59 here-in-before but fixed in repair.
Hacking out old broken glass (any thickness size, quality or description) from wooden frames glazed with putty or fitted with beads not exceeding 1.50 Sqm.
S&F Sheet glass ordinary quality 3.00 mm thick and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed ..
S&F 3.00mm thick frosted glass pin head type and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed .
S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed .
S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified
S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S&F Powder coated aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.
S&F in repairs 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed .
M&L for 5 mm thick sheet glass, ordinary quality fixed with glazing clips/aluminium cleats in square n.exc 0.50 sqm in each pane all as specified complete all as specified and as directed .
Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.
S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
S&F in repair stainless steel curtain rail 25 mm dia decorative type complete all as specified and as directed by Engr-in-Charge.
S&F in repair stainless steel decorative brackets/finials for curtain rail 25mm dia.
S&F in repair powder coated aluminium curtain rail 20 mm dia complete all as specified and as directed by Engr-in-Charge.
S&F in repair powder coated aluminium brackets and finials for curtain rail 20mm dia.
S&F in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed.
Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge.
M&L for 40mm thick PCC 1:2:4, type B0 (using 12.5mm graded stone aggregate ) as in repair of top surface of pavement and flooring etc. and surface finished even and smooth with using extra cement complete all as specified and as directed by Engr-in-Charge
M&L PCC 1:2:4 type B0 using 12.0 mm graded stone aggregate 25 mm thick as in levelling course to floors complete.
M&L for polishing of terrazzo floor with grinding machine to remove the stains etc and polishing complete all as specified and as directed by Engr-in-Charge.
Dismantling of floor hearth or wall tilling tiles including CM bedding (but not backing) and disposing the rubbish off the premises as directed
Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including Cement Mortar screed 15 mm thick in CM (1:6) all as specified and directed.
M&L for Glazed ceramic tiles 300 x 200 mm x 7 mm thick in vertical surface, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat 10 mm thick in CM (1:4) all as specified and directed..
M&L for Glazed ceramic tiles 350x 250x 7 mm/ 450X 350X 7mm thick in vertical surface, set and jointed in neat cement slurry and pointed in white or colour cement to match including over and backing coat 10 mm thick in CM (1:4) all as specified and directed..
M&L for 15mm thick Screed bed or bedding layer of cement mortar 1:6 on floor for laying floor finishes complete all as specified and as directed by Engr -in-Charge.
M&L for Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces to receive wall tiles complete all as specified and as directed by Engr-in-Charge
M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and as directed by Engr-in-Charge
All as per item no. 88 above but as in vertical surface complete all as specified and as directed.
M&L 18 to 20 mm thick machine cut polished granite 1st quality black stone slab over kitchen platform and similar places over and including 15mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match with existing surface including demolition of existing stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including grinding and moulding of exposed edges of granite complete all as specified and as directed. (Sample of granite should be passed by GE before execution of work)
S&F in repairs vitreous China wash down water closet (pedestal pattern) white (including fixing bolts) including removing old one and connection to drain and flush pipe complete all as specified and as directed.
S&F in repairs vitreous China wash down water closet single piece (pedestal pattern) white (including fixing bolts) and connection to drain and flush pipe complete all as specified and as directed. Make:- Parry ware single piece suite Apollo C8939 (S-220) (690 x 375 x 730mm) or equivalent make of Hind ware /Cera
S&F in repair plastic water closet seat, white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. Make : Cera/Parry ware/Hind ware
S&F in repair plastic water closet seat for single piece closet, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. Make:- Parry ware EWC Seat cover E 8305 Ultra Solid white or equivalent make of Cera/Hind ware
S&F in repair PVC valveless, syphonic action type, flushing cistern 10 Ltrs capacity , low level, white, with inlet, ball valve, float and handle including MS brackets including flush pipe PVC connections etc complete
M&L for repairs (only) to flushing cistern including replacement of washer, handle, syphon etc complete all as directed.
S&F in repairs flush pipe of polyethylene of low or high density of PVC 32mm dia for low level flushing cistern including all joints
S&F in repairs vitreous China wash hand basin of size 580 x 450 mm white, flat back with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain and plug and porcelain stopper but including cast iron brackets.
M&L for repair only to wash hand basin by replacement of brackets, etc complete all as directed.
S&F in repairs vitreous China wash hand basin with pedestal with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain and plug and porcelain stopper complete all as specified and as directed. Make:- Wash basin Parry ware Cart part No. Azure C8886 (565x425x175mm) and Wash basin Pedestal-Long Parry ware Cart part No. Azure C888 (175x175x725mm) or equivalent make of Cera/Hind ware
S&F in repairs vitreous China wash hand basin counter top of size 565 x 465 x 185 mm white, with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain and plug and porcelain stopper but including cast iron brackets. Make :- Counter top Basins Parry ware Cart part No. Leeds N white C0483 (565x465x185mm)or equivalent make of Hind ware/Cera
S&F in repair pillar taps, brass, with capstan heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Pillar Tap with aerator Parry ware Cart Part No.Crust T3102A1 or equivalent make of Hind ware/Cera
Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.
M&L for 100 mm thick cement concrete type D2, 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed by Engr-in-Charge.
M&L Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm Spreading and levelling and ramming as specified complete all as specified and as directed by Engr-in-Charge.
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M35 grade with grey cement and pigment complete all as specified and as directed by Engr-in-Charge.
M&L for coloured prepolished rubber moulded chequered cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with 3 mm spacer bar, set, jointed and pointed in neat cement slurry as in floor with grey cement and filling joints with colour pigment over and including 20 mm thick screed bed in cement mortar 1:6 including dismantling of old tiles complete. Make : NTC
All as per item No. 107 above, but except chequered tiles complete all as specified and as directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed .
S&F PVC semi circular eaves gutter 180 mm dia, with all necessary fittings, joining compounds, clamps, nut, bolts or screws etc and fixing in position, at any height complete all as specified and as directed .
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls(jointing shall be done with solvent cement) complete all as specified and as directed .
S&F PVC (SWR) bends, any radius, 110mm bore all as specified, complete all as specified and as directed .
S&F in repair grating doom 100 mm dia of PTMT (Minimum weight 25 grams)
S&F in repair grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40 grams)
S&F in repairs, PVC bathroom cabinet (white) of size 420 x 300 x 100mm (approx.), with one single shutter and built in mirror in front of shutter complete all as specified and as directed by Engr -in-charge.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated guard and railing size 60cm long (with brass bracket complete.
S&F in repairs, corner glass shelf of 5mm thick plain sheet glass and with brass, chromium plated bracket complete all as specified and as directed by Engr -in-charge.
S&F in repair PVC backing looking mirror of size 45x60cm fixed to wooden plugs with chromium plated brass screws and cup washers. complete all as specified and as directed by Engr-in-Charge.
M&L for cupboard shutter 18mm thick laminated on both side Multiwood modular, water proof, termite & Borer proof, corrosion free with melamine polished including taking down old one complete all as directed and as directed by Engr-in-Charge.
S&F in repairs stainless steel auto closer counter sunk hinges complete all as directed and as directed by Engr-in-Charge.
S&F Ball bearing runners 45 mm, 500 mm long Telescopic ball bearing drawer channel full extension load capacity 50 kgs, Make : - Hexa, Shreeji, Hafele, Hettich
S&F in repairs 100mm long stainless steel handle complete all as directed and as directed by Engr-in-Charge.
M&L in repair 12 mm thick Plywood, Grade BWR type BB fixed with screws to timber frame work for Cup board self, shutter, drawer etc complete all as specified and as directed.
M&L in repair 18/19 mm thick Block board Grade 2 quality interior grade decorative type with decorative face veneer on one face fixed with screws to timber frame work for Cup board shutter, drawer etc complete all as specified and as directed.
M&L in repairs 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nail to timber frame work
S&F in repair SS soap dish complete all as specified. Make:- Parry ware Cart part No.T6902A1 or equivalent make of Cera/Hind ware
S&F in repair door bottom seal aluminium body with rubber seal not exceeding 1000mm length complete all as specified and as directed.
S&F in repair 0.71mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed)
S&F in repair stainless steel sink with draining board made out of 1mm thick sheet kitchen or laboratory with plugs, washers including bedding lime cement mortar to dwarf wall or including fixing cantilever brackets fixed to wall and connecting union to pipe overall size 914x460x203mm bowl size 405x354x203 mm including waste coupling and waste pipe complete all as specified and directed.
S&F in repair sinks made of stainless steel 1 mm thick kitchen sink with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified.
REIGN CONSTRUCTIONS
MS BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .