SPECIAL REPAIRS TO BLDG NO T2 OF 76 BDE CAMP UNDER AGE BR (N) NO I OF GE (NORTH) SECUNDERABAD

Amount

Dismantling asbestos cement (corrugated semi corrugated etc.) sheet in roof covering/ fibre sheets etc complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating galvanised based Corrugaed steel sheet 0.50mm thick, AZ-150 of approved colour sheet of 0.50 mm thick having tensile strength of 550 Mpa as roof covering/cladding to wall fixed with self tapping (SD) screws complete all as specified and as directed

S&F Pre-painted galvalume aluminium zinc coating galvanised based profiled/plain steel sheet 0.50mm thick, AZ-150 of approved colour sheet of 0.50 mm thick having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping (SD) screws complete all as specified and as directed

M&L Providing PCC (1:2:4) type B1( using 20 mm graded stone aggregate) as in bed block, coping, roof kerbs, bands etc including necessary form work complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc .complete all as specified and as directed.

S&F Rolled mild steel sections as in frame work such as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde E-250) quality “A” complete all as specified and as directed

S&F Roof strusses (framed) and connecting plates, etc., ( cut to ordinary lenghts i.e within 20mm of the length indicated of Fe 410-W ( Gde-E-250) quality A complete all as specified and as directed

S&F Plates (plain or chequered )channels, square cut or notched(ordinary and counter sunk)forming holes, without anyattachment etc.Roof strusses (framed) and connecting plates, etc., including necessary precautionary measures as in supports etc., complete all as specified and as directed.

S&F Hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling or riveting etc and similar work confirming to Fe-410-0 of Fe-310-0 of Gde E-165 complete all as specified and as directed

S&F Mild steel bolts.purpose made.with hexagonal orforming holes, without anyattachment dia of neck exc 20mm not exc 25mm complete all as specified and as directed

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets etc complete all as specified and directed.

S & F E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 39x29.7x0.60mm cross tee 29x24.7x0.60mm and wall angle 22.2x22.2x0.50mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised with PPCGS) over the grid providing 4mm thick HPSC pre primed self designer texture non asbestos fibre cement building board fixed to frames etc complete all as specified and and as directed

M&L Providing RCC (1:1.5:3) type A-1 (using 20 mm graded stone aggregate) as in beams, cantilevers bressummers lintels over 1.5 m span,etc complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunhings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams etc as in rough finished flat surfaces of concrete complete all as directed.

M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed.

All as per Item No.15 above,but 5 mm dia and over upto and including 10 mm dia as in stirrups , spacers and binders etc.,

Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L Brick work with sub class 'B' bricks of old size, straight or curved on plan exceeding 6.0 metre mean radius built in CM (1:6) complete all as specified and as directed.

Taking down cement plaster of any description and thickness on brick walls including racking out joints, hacking for key, scrubbing down with water etc including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L Rendering 12 mm thick CM (1:4) on fair faces of brick work or concrete surfaces without using extra cement complete all as specified and as directed

M&L Rendering 15 mm thick CM (1:6) on fair faces of brick work or concrete surfaces without using extra cement complete all as specified and as directed

Supply only water proofing compound of ISI marked complete all as specified and as directed.

M & L Preparing newly plasterd wall surfaces of walls and applying two coats of Acrylic distemper over and including a coat of primer over and including 3 mm thick wall care putty in two layers complete all as specified and as directed.

M & L Complete removal of existing treatment on wall surfaces and applying two coats of Acrylic distemper over and including a coat of alkali resistant primer over and including 3 mm thick wall care putty in two layers complete all as specified and as directed.

M&L Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L Preparing old painted surfaces of walls and applying one coat of weather proof paint on external surfaces of walls and celing, including necessary scaffolding and saftey precations to the work complete all as specified and as directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

M & L Preparing old decorative surfaces of walls, by washing, rubbing down, stopping and applying two coats of cement base paint of any colour complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Removing excavated material (soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L Hard core of broken stone or boulders of gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rolling with power roller exc. 8 tonne & n.exc. 12 tonne to a true surface complete all as specified and directed.

M&L 75 mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed.

M&L Designer rubber moulded chequered cement concrete tiles with mixture of grey and white cemetn in equal porportions with pigments of size 200x 200xx25mm ,300 x 300 x 22mm or 250 x 250 x 22mm thick and set and pointed in neat cement slurry in floors over and including screed bed or bedding layier of 15 mm thick CM (1:6) for laying floor finishes etc complete all as specified and as directed.

Demolition of PCC of any description and in any position not otherwise specifically provided for(un-rainforcement) and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as specified and as directed

M&L PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in copings, kerbs, channels, water through and the like including weathering, slightly rounded or chamfered angles and throating as directed chamfered necessary for work

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L 20-25 mm thick machine cut kota stone as in flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclduing rubbing and polishing over and including screed bed or bedding layer of 15 mm thick CM (1:6) complete all as specified and as directed.

M&L 20-25mm thick machine cut kota stone as in skirting / dado laid jointed with grey cement slurry mixed with pigment to match the shade of the slab inclduing rubbing and polishing over and including backing coat of 10 mm thick CM (1:4) complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M & L Vitrified ceramic tiles(light shade) 10 mm thick polished of size 600x600 as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick CM (1:6) screed bedding layer complete all as specified and directed.

M & L Vitrified ceramic tiles (light shade) 10 mm thick polished (square/ rectangular) on vertical surfaces as in skirting/dado, etc. set and jointed in neat cement slurry/paste and pointed in white or coloured cement to match over and including backing coat of 10 mm thick CM (1:4) complete all as specified and as directed.

M&L Preparation of old surfaces of steel, of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L Preparation of new surfaces of steel, of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 sqm each complete all as specified and as directed

S&F Steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and ave width of aperture 1.4mm shall be used for fly proofing . 4mm thick plain sheet glass to be used for glazing of glazed shutters complete all as specified and as directed.

S&F 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed complete all as specified and as directed.

M&L PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in coping, bed plates, filling back hollow portion of chowkats complete all as specified and as directed

M&L Cutting holes in brick wall built in cement mortor for inserting hold fast and making good the disturbed portion in cement mortor 1:3 depth of embeded portion exc half brick & n.exc one brick complete all as specified and as directed.

S & F 35 mm thick factory made second class hardwood, plain framed panelled shutters (any number of panel) with panels of timber flat on both sides(feather edged) or of veneered particle board medium density wood particle board with commercial veneering on both faces. complete all as specified and as directed.

S & F 35 mm 2nd class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24(a) etc completed all as specified and directed by Engr-in-Charge.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section with bright bolt complete all as specified and as directed

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F Mild steel sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed.

M & L Preparation of new wood or wood based material over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of prink primer complete all as specified and as directed.

S&F Stainless steel curtain rod of 25 mm bore fancy type complete all as specified and as directed

S&F in repairs for stainless steel curtain rod brackets (decorative type) suitable for curtain rod of 25 mm dia, complete all as specified and as directed.

M&L Decorative laminate 0.9mm thick Type I of texture surface finish , colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction complete all as specified and as directed.

M&L in repairs MDF board, 18/19 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed.

M&L in repairs MDF board, 12 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed.

S & F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised 40mm width of flap fixed with screws as in repairs

S&F 50 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type E-22 complete all as specified and as directed

S&F in repairs 100 mm size hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

M&L Providing concealed point wiring complete with multistranded copper conductor cable in concealed non- metallic PVC coduit 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLSH conforming to IS - 694 multistranded drawn including conduit with new sunk type pressed steel terminal boxes suitable for MODULAR switches including fixing/grounting sunken/ surface as per site requirement covered with suitable modular white cover plate for suitable size for mounting of MODULAR switches, regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly for one light point controlled by one, one way switch 5 amps, single pole and making good the disturbed wall surfaces to match with the existing surfaces complete all as specified and as directed for the following :- Note: 1. Modular cover plate with frame and modular metal flux box shall be deemed inclusive in the unit rate quoted.

All as per Item No.65 above, but one ceiling fan point controlled by one,one way switch 5 Amps,single pole and regulator

All as per Item No.65 above, but one 3 Pin 5 Amps switch socket outlet point controlled by one switch on Independt board.

All as per Item No.65 above, but one 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per Item No.65 above, but using 2.5 Sq mm FRLS single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 3 pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm FRLS copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S & F Modular switch 1 way, 6 A, 1 Module capacity 230 volts complete all as specified and directed.

S & F Modular switch 1 way, 16 A, 1 Module capacity 230 volts complete all as specified and directed.

S&F Modular socket outlet multipurpose 5 Pin, 6 amps, 230 volts combined 2 Module complete all as specified and directed.

S&F Modular socket outlet multipurpose 6 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified and directed.

S & F Modular ceiling fan regulator,5 stepped type heavy duty suitable to work on 230 volts, 2 Module complete all as specified and as directed.

S & F Ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and as directed.

M & L Submain wiring with two runs of single core 6 Sq mm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one run of 6 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and as directed. Note. Two runs of 6 sqmm cable, one run of 6 sqmm cable as earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

S&F Two single core cables of size 10 sqmm,1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire, complete all as specified and directed.

S & F 1x20 watt wall mounted LED batten with extruded aluminium heat sink provided for efficient heat dissipation & interated electronic driver , 230 volts bipin holders, DIFFUSED TYPE connetor block internally prewired etc with 2 Nos PVC round blocks for mounting arrangements including all accessories with new 3 core multi stranded copper conductor of size 23/0.193 from ceiling rose to fitting and including LED Tube 20W complete all as specified and directed.

S&F LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed/ surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

S&F LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

S &F in repairs Sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar, 240 Volts, double door with magnetic locking system complete all as specified and as directed.

S &F in repairs Sheet metal enclosure MCB DB SPN 8 way with suitable rated bus bar 240 Volts double door with magnetic locking system complete all as specified and as directed.

S&F in repairs MCB, SPN 40 to 630 Amps, 240 volts of rupturing capacity 10 KA, 'C' series complete all as specified and as directed.

S&F in repairs MCB, SP 6-32 Amps, 240 volts of rupturing capacity 10 KA, 'C' series complete all as specified and as directed.

M&L Earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanised iron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plate of SSR Pt - I connected to earthing test point and including testing on completion complete all as specified and as directed. NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate in pit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia TMT bars @ 100mm centre to centre both ways, CI cover with CI frame hinges, galvanised iron funnel with watering pipe, wire mesh, complete.

Taking down ceiling fans 1200/1400mm sweep and exhaust fan 200/450 mm sweep, remaining/cleaning of dust properly cleaning, greasing& overhualing of bearings including refixing and connecting up all as directed by Engr-in-Charge. Note : Replacement of defective/worn out parts will be measured & paid for separately

S&F in repairs capacitor 2/2.5 mfd as directed (Make - Asian/Usha/Epcos of siemens) complete all as specified and directed.

S&F in repairs ball bearing of exsiting ceiling fans complete all as specified and directed.

S & F in repairs twisted three core copper flexible cable of size 1.5 sqmm from connector to the ceiling rose complete all as specified and directed.

S & F in repairs ‘U’ clamps complete with nut, bolts & split pins Heavy duty, suitable for existing ceiling fan complete all as specified and directed.

S & F in repairs M.S. rod for ceiling fans 3 ft long with ‘U’ clamp at one end other end with out nut bolts washers or screwed thread with check nuts & pin complete.

S & F in repairs Nut of bolts washers for fan blades fixing of ceiling fan of any make/size/type as per site requirement (6 Nos for each set) complete, a suitable for existing ceiling fan on site complete all as specified and directed.

M & L Rewinding of stator complete with super enameled copper wire of gauge/ weight of copper coil, quick varnishing oiling, greasing insulating materials including replacement of worn out parts like u/s cotter pin, nut, screw, check nuts and bolts as required including cleaning of body and testing of the size 1200/1400mm sweep ceiling fans and 200/450mm exhaust fans of any make/model complete all as specifed and directed. Note :- Sapre parts except mentioned above and rewinding to be replaced will be measured and paid seprately under respective items of schedule.

M & L Spray painting of two coats of synthetic enamel paint on ceiling/exhaust fans of any size complete all as specified and directed by Eng-in-charge.

S&F Ceiling fans 1200mm sweep with blades, with BLDC motor,service value 6.000 BEE including 1.5ft/3ft/5ft long rods, hooks and other accessories, 230V, complete all as specified and directed.

harshraj and co (BID ID -3508398)

ATUL ENTERPRISES (BID ID -3509433)

VACON INFRASTRUCTURES (BID ID -3502366)