Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.6 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹23.2 L+₹91,827 (4.12%)Rejected-Finance VPO SARNA STATION PATHANKOT 145 025 PB | PATHANKOT | PUNJAB | 145025 | L2 | Rejected-Finance Second Lowest |
Tender Value
Refer Docs
EMD Value
₹48,300
Closing Date
14 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major S N Gaikwad
Holta Cantt Palampur
SPL REPAIR TO MES INSTALLATION AT PALAMPUR MIL STN
2023_MES_609341_1
GEP-31/2023-24
Open Tender
Civil Works
Item Rate
180 days
Palampur Mil Stn
As per tender documents
8 documents required · 8 mandatory
₹500
GE Palampur
₹48,300
31 Aug 2023
17 Jul 2023
16 Aug 2023
17 Jul 2023
14 Aug 2023
31 Jul 2023
Amount
Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.
M&L PCC 1:3:6 type C-2 using 40mm crushed stone aggregate as in foundations and mass concrete complete all as specified and directed.
M&L PCC 1:2:4 type B-2 (nominal mix) using 20mm crushed stone aggregate as in plinth protection 75mm thick surfaces finished even and smooth without using extra cement and dividing into panels not exc 1.20 mtr complete all as specified and directed.
M&L 40mm thick PCC 1:2:4 type B-1 using 20mm crushed stone aggregate as in floor finished even and smooth without using extra cement complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.
M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any guage, thickness incl Nainital or similar pattern roof coverings.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)
M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified. (Colour as approved by GE)
Dismantling timber scantlings 40 sqcm and over in section in any position framed or unframed work etc, complete all as specified and directed.
S&F mild steel roof trusses (framed), trussed, purlins, crane gantries. rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe 290-W (Grade E-165) complete all as specified and directed.
S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling old water tank any capacity and any description complete all as specified and directed.
S&F in repairs ball brass valves, high pressure, with polythene float and fly nut complete, screwed for 20 mm bore iron pipe or brass ferrule complete all as specified & directed by Engineer-in-charge.
S&F in repairs 20mm bore gun-metal, globe or gate valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.50Sqm and not exceeding 4 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed.
Taking down door shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.
S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer, complete all as specified and directed.
M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.
S&F 35mm thick factory made 2nd class hard wood rail and style plain framed, panelled shutter with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS tube factory made with double side shutters wire gauged shutters & glass glazed shutter(wire and glass panes shall be measured and paid separately) with side hung shutters with steel handles and steel peg stay doytailed at welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI 40x5M mm frame work,incl other fittings,hinges,handles tarred hold fast PCC blocks etc. all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 ,complete all as specified.
S&F 3mm thick transparent fibre glass ordinary quality as in glazing not exc. 0.50 Sqm in each pane fixed in wood or streel frames with oil putty or woode beadsor self tapping screw complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.
S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 200 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 100 mm size aluminium butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin ,anodised, type B-21 complete all as specified and directed.
S&F mild steel sliding door bolt, ordinary type stove enameled black with bright bolt not less than 16mm dia and included a minimum of 6 nuts and bolts, four on bolt plate and two on staple plate 300mm long complete all as specified and directed.
Taking up or down 15mm bore steel water tubing and connections including cleaning for re-fixing, complete all as specified and directed.
Taking up or down 20mm bore steel water tubing and connections including cleaning for re-fixing, complete all as specified and directed.
S&F steel water tubing, 15mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specifed
S&F steel water tubing, 20mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specifed
S&F in repairs stop valve/angle valve, cast copper alloy, fancy type,chromium plated, screwed down, high pressure, with quater turn flange, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed by Engineer-in-charge.
S&F in repairs, fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.
Taking down cement plaster of any description on brick or stone or cement concrete block walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of rubbish off the premises and leave the work clear of any plastering complete all as specified and directed.
M&L rendering 15mm thick plaster in cement mortar(1:6) on stone masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing, finished even and smooth without suing extra cement complete all as specified and directed.
All as per item No. 35 above but 15mm thick plaster in CM 1:4 on external surfaces of wall.
M&L 10mm thick plaster in CM 1:4 on ceiling all as specified and directed finished even and smooth without using extra cement complete all as specified and directed.
M&L preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over chalk white complete all as specified and directed.
M&L preparation of new plastered surfaces of wall and applying two coats of cement base paint over one coat of white wash complete all as specified and directed.
M&L preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L preparation of new wooden surfaces of any description exc over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparation of new steel surfaces of any description exc over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good distrubed ground, post embedded in concrete surface complete all as specified and directed.
Dismantling fencing wire mesh, any type including cutting of bushes, shrubs & tree branches to create working space etc. complete all as specified and directed.
S&F mild steel in fencing posts, struts, including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets for securing wire mesh etc., incl necessary drilling, bolting and rivetting and similar work confirming to 290 gde E-165 complete all as specified and directed.
S&F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staple, complete all as specified and directed.
Excavation in post holes (or similar holes) in any type of soil each n exc 0.50 cu.m,getting out,returning,filling on and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25cm, complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any of standards, rails, straining bolts etc. including provision of binding wire complete all as specified and directed.
Supply only chain link MS galvanised fencing wire 3mm dia and size of mesh 50mm x 50mm complete all as specified and directed.
S&F mild steel round bars 10mm dia for straining bars in chain link fencing (Fe-290 Gde-E-165) complete all as specified and directed.
M&L 75mm thick PCC 1:4:8 type C-2 (40mm graded crushed stone aggregate) as in sub base of floors/ paver block/ path etc finishing the surface even & rough without using extra cement complete all as specified and directed.
M&L 60 mm thick machine pressed precast concrete interlocking paver block with grey cement and pigment in any shape and size (shape as approved bt GE) laid in path, porch, hard standing or flooring etc conforming to IS-15658-2006, M-35 grade complete all as specified and directed .
Sand cushioning 50mm thick for interlocking paver blocks including water and consolidation complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
M&L Glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm/450x300x7mm/600x300x7mm thick set and jointed in neat cement slurry, pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coat in CM 1:4 to receive tiles, complete all as specified and directed.
Supply and installation with testing complete of digital water level indication device, operating on single phase supply direct display in 19mm size (letter display) digital system in meter/CM of water of over head tank ensuring alarm while water fall or rise over predetermined limits with the following description complete all as specified and as directed by Engineer-in-Charge including dismantling old unserviceable water level indicator:- (a) The entire unit must operate through a compact electronic circuit which must ensure reliable operation at 230V + 10% at 50 Hz + 5%, with reliable in display nad alarm at low and high level of over head tank. (b) One circuit must be housed in high impact polystyrene molded box with nylon moulded connection strips. The level system must resistance transducer, while unattested by corrosion and other contents available in water. The product must be controlled by micro switch. (c) The whole unit must electronically controlled and the upper level and lower level indications must be in two parts. Each complete part must be fitted in MS CRS sheet box separately. One must be installed at over head tank and second at pump house with proper powder coating paint wth locking arrangements.
M&L laying, connecting & testing four core copper conductor flexible PVC insulated heavy duty unsheathed cable 1100 volts grade 1.5 Sqmm from control box to display meter in ducts/on ground/through existing pipes etc including taking out unserviceable flexible cable complete all as specified and directed.
M&L for dismantling old notice board and supply only notice board of size 1.5 x 1.00m with hard wood frame and 12mm thick ply wood and soft board over ply and green cloth over the board, green cloth covered with 100% transparent sheet and decorated around with red tape complete all as specified and directed.
M&L for dismantling old notice board and supply only notice board of size 1.2 x 0.75m with hard wood frame and 12mm thick ply wood covered with white laminated hylem sheet with two number marker pen and one number eraser/duster including hanging arrangement eye hole and grouting two Nos pegs for hanging the board and decorated around with red tap complete all as specified and directed.
M&L dismantling old name board and supply only plant name board of size 0.30 x 0.40m with transparent PVC hard sheet 3.0mm thick, over lapped along the length of sheet in full length in order to insert a name sheet of paper in between and bend to shape for fixing with the crome plated 25mm dia steel pipe stand of 1.2 mtr height, two legs made of single piece of pipe to hold name board complete all as specified and directed.
Disconnecting and taking out existing unserviceable light fitting of any description and in any position on poles and S&F 20W LED post top lantern with complete accessories to be fixed on pole/wall including connecting the fitting to control switch at the bottom of the pole with using 2.5 Sqmm two singl core PVC insulated and unsheathed copper conductor cable complete all as specified and directed. Make: Bajaj Cat Part No. BGCT W4 LERD WW/Crompton Cat Part No. PTH-20 CDL/Havells Cat Part No. RUBYPT25WLED830SSYMTOPC
S&F in repairs cable junction box made of thermoplastic, halogen free, weather proof with metric knock out for cable entry including four/five pole terminals and cable entry glands for incomming, outgoing and connection cable with protection grade IP-66/67 of size 205x255x112mm and suitable for LT under ground cable any size/capacity including bracing clamp, bolts, nuts and washers complete all as specified and directed. Make: Hensel/Model No. KF2525B or equivalent make as approved by GE.
S&F in replacement of integral LED aviation light 10W comprising of aluminium housing with polycarbonate enclosure. Make: Havells/Bajaj/CG.
S&F three core (3x1.5 Sqmm) flexible flat/round cable, copper conductor multistranded, PVC insulated and overall PVC sheathed, 1100 volt, drawn through PVC conduit for connection to aviation/post top lantern from junction box to light complete all as specified and directed.
Dismantling of old unserviceable flow meter assembly, S&F new flow meter assembly for mounted pedestal type complete with flow meter, dial indicator niddle cord penion, counter weight, bearing, copper float of suitable size all as required for making smooth functioning of the system and testing complete of following capacity of filter beds complete all as specified and directed. Make Pearl filter, Candy filter/Pettersion.
(a) 250000 LGPD capacity bed of filtration plant No. 3
Material and labour for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI earthing strip 32x6mm by means of GI bolts/nuts/washers and protected by 40 mm bore GI light grade pipe upto test point or upto main switch board / electric equipment / pole / lightning arrestor / HT/LT equipments / GODO switch etc, fixing with 02 Nos nuts and bolts and protection pipe fixed with and including flat iron clamps, bolts, nuts and washers. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common salt all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50m, Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) complete all as specified and as directed by Engineer-in-charge.
Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing strip upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.
M&L disconnecting taking down and stacking the unserviceable/broken earth wire/strip of any szie from the roof or from wall and removing the same from the site complete all as specified and directed.
S&F in replacement air termination vertical type, single pointed made with 12mm dia 300mm long aluminium rod including necessary fixing arrangements with aluminium bolts, nuts, lead washers etc complete and including provision of GI tubing light grade 40mm dia, 300mm long embedded in PCC block (size 30cm x 30cm x 30cm) one end and other ned fitted with air termination rod complete all as specified and directed.
S&F in replacement test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex. head screw for fixing the same on wall complete all as specified and directed.
S&F galvanised iron strip 32x6mm from earth pit to test point provided all around the Bldg for lightening protection laid in trenches/fixed to walls on epoxy insulators with bolts, check nuts etc and connecting up complete all as specified and directed.
S&F horizontal/down conductors, aluminium strip 25 x 3.15mm and including epoxy insulator bus bar type 40mm thick at an interval of 60cm apart for lightening protection on roof and for down conductors, including all fixing arrangements and aluminium nut, bolt & washers complete all as IS-2309-1989 and testing all as specified. Note: Aluminium strip shall be jointed with rivets (minimum 4 Nos)
SUBASH MAHAJAN
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .