Providing LWSS to GP Seri Kothi and Batwara in Tehsil Sundernagar Distt Mandi HP

Amount

Excavation in foundation trenches etc. in earth all kinds of soil such as pick work jumper work blasting soft or hard rock or by chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming/ chiselling of sides and bed stacking the excavated soil clear from the edge of excavation and returning the excavated soil after completion of work in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge.

Cutting in earth work and disposal of excavated earth work upto a lead of 20 mtrs. in all kind of soil complete in all respect.

Providing and laying cement concrete 1:6:12(1cement :6sand:12graded crushed stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete 1:4:8(1cement :4 sand: 8graded crushed stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete 1:3:6(1cement :3 sand: 6graded crushed stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete 1:5:10 (1 cement: 5 sand: 10 graded stone aggregate 40mm nominal size with 15% plum and curing complete excluding the cost of form work in retaining wall/ breast wall. The size of plum shall usually be 150mm to 300mm in all respect and as per direction and to the entire satisfaction of Engineer-in-charge.

Randum rubble masonary polygonal rubble masonary (uncoursed brought to courses in walls with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1cement: 6 sand: 12 graded stone aggregate 20mm nominal size) in cement mortar 1:6 (1cement: 6 sand) in breast wall and retaining wall including all leads and lifts.

Providing and laying cement concrete 1:1.5:3(one cement :one and half sand : three graded crushed stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced cement concrete work in all leads and lifts in :- (a) Foundation ,footings bases of columns and the like mass concrete in all leads and lifts

(b) walls any thickness but not less than 0.1 mtrs. thickness attached pillasters , plinths and string courses etc.from top of foundation level upto floor two level in all leads and lifts .

Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mtrs. and removal of the same for in-situ reinforced concrete and plain concrete work in all leads and lifts (a) Vertical surface such as walls(any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like

(b) flat surfaces such as soffits of suspended floors,roofs, landings and the like in(a) floor etc. upto 200mm thickness.

(c ) Edges of slab and break in floors and walls under 20cm wide

(b) Beams, Cantilivers, girders and lintels sidies and soffits of beams, beam haunchinges, cantilivers, girders, bressumers, and lintels not exceeding 1 mtr. in depth in all leads and lilfts.Colunms pillars posts and struts upto floor two level.

Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 1cement :3 sand) complete in all respect.

Brick work using common burnt clay building bricks in foundation and plinth upto floor two level in cement mortar 1:6(1cement:6sand) in all leads and lifts. Ist class bricks

Half brick masonary in common burnt clay building bricks in cement moror 1:4 (1:4 (1cement : 4 sand) in all leads and lifts.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level in all leads and lifts.

Fixing of GI pipe light grade for inlet, scour and over flow pipe (Labour rate) 65mm dia in all leads and lifts.

Providing and fixing Gun metal sluice valve (with hand wheel) as per specification complete in all respect (i) 65mm dia

1.20 metre high fencing with 1.80 metre RCC posts 3.00m centre to centre with nine horizontal lines and two diagonal of galvanised mild steel barbed wire (IS: 278:1962 type-I) weighting 9.38 kg/100 metre strained and fixed to posts with 6.1 staples including cost of post, struts and straining bolts shall be paid for separately complete in all respect in all leads and lifts.

Providing and laying cement concrete 1:2:4(1Cement :2 sand:4 graded crushed stone aggregate 20mm nominal size and curing completre excluding the cost of form work and reinforcement for reinforced concrete work in all leads and lifts in :- a)Suspended floors, roofs, landing, shelves and their supports balconies, lintels, beams girders bresumers and cantilevers upto all floor two level .

Providing and fixing precast concrete manhole cover & frame conforming to IS: 12593-1988 part-I and IS: 12592-1991, Part-II, 500mm diameter medium duty complete in all respect.

Providing and placing in horizontal layers filtering media duly graded screened washed and cleaned as specified by the Engineer-in-charge including all leads and lifts:- Top Layer (i) Fine sand screened, cleaned, washed and graded effective size 0.20 to 0.40 with uniformity co-efficient 2 to 3).

Second layer: Coarse sand 3mm to 6mm

Third Layer:- Bajari 6mm to 20mm

Fourth layer:- Bajari 20mm to 25mm

Bottom layer:- Broken stone 50mm to 75mm

Providing and placing Ist class standard bricks in fitler bed in two layers so as to make cross drains as per direction of Engineer-in-charge.

Providing and fixing cast iron spun spigot and socket soil ventilating pipe ( lead caulked joints to be measured and paid for separately ) 100mm dia in all leads and lifts.

Providing and fixing sand cast iron/cast iron spun fitting cast iron cowl 100mm dia complete in all respect.

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought , framed and fixed in position 2nd class deodar wood in all leads and lifts.

Providing and fixing panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including black enamelled iron butt hinges with necessary screws in all leads and lifts..(i) 40mm thick 2nd class deodar wood.

Providing and fixing wire gague shutters using galvanised MS wire gauge of IS qauge designation 85G with eire of dia 0.56mm for doors windows and clearstory windows including bright finished black enamelled iron hinges with necessary screws 40mm thick 2nd class deodar wood.

Providing and fixing MS grills of required pattern in wooden frame of window etc. with M.S. flats, square or round bars with round headed bolts and nuts by screws plain grills in all leads and lifts.

20mm cement plaster in single coat on rough side of brick/ concrete/ stone walls for interior plastering upto floor two levels including arrises internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6sand) in all leads and lifts.

15mm cement plaster in single coat on rough side of brick/ concrete/ stone walls for interior plastering upto floor two levels including arrises internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6sand) in all leads and lifts.

6mm cement plaster to ceiling (a) in cement mortar 1:3( 1cement :3 sand) complete in all respect in all leads and lifts.

Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed paint brushing wood primer pink.

Painting two coats (excluding priming coat) on new wood and wood based surfaces,with enamel paint to give an even shade including cleaningthe surface of dirt ,dust and other foreign matters sand papering and stopping with enamel paint other than white complete in all respect in all leads and lifts

White washing with lime on undecorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt , dust and other foreign matters.

White washing with lime on ceiling or slooping roof complete in all respect in all leads and lifts.

Providing 40x3mm iron hold fast 40cm long including fixing to frame with 10cm dia bolts, nuts and wooden plugs and embending in CC block 30x10x15cm 1:3:6(1cement :3sand:6 graded stone aggregate 20mm nominal size)

Providing and fixing MS sliding door bolts with bolts and nuts screws etc. complete.(i) 250 x16 mm

Providing and fixing MS tower bolts ( barrel type) with screws etc. complete.(i) 250 x 10 mm

(ii) 200x10mm

Providing and fixing MS handles with necessary screws etc. complete.(i) 125mm dia

Providing and MS hooks and eyes

Boulder filling behind retaining wall under floor within all leads and lifts complete in all respect.

Cement concrete flooring 1:2:4 (1cement:2sand: 4 graded crushed stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement in all leads and lifts. (a) 40mm thick

Pointing brick work with cement mortar 1:3 ( 1 cement :3 sand) Raisied and cut complete in all respect.

Providing plinth protection 50 mm thick in cement concrete 1:3:6 ( 1 cement, 3 sand,6 graded stone aggregate 20 mm nominal size ) with in all leads and lifts complete in all respect.

Providing and fixing vitreous china wash down water closet (Indian Type, W.C pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1 : 1 ( 1 cement 1 sand) ( Seat and cover to be measured and paid for separately) (White colour)

Providing and fixing 100 mm size P or S trap for water closet ( Squatting Pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 ( 1cement : 1 sand) Sand cast iron

Providing and fixing automatic flushing cistern with a pair of CI or MS bracket complete with fitting including CI Syphonic apprature masquits proof lid, CP brass unions and coupling for connecting with inlet outlet and over flow pipes including cutting holes and making good the same Over flow pipe to be measured and paid for seperately (Viterous china 5 liters capacity

Providing & fixing viterious china wash basin with single hole for pillar tap with CI or MS bracket painted white including cutting hole including good the same excluding fitting Cera sanitary work (cornet) white 550x400 white

Providing and fixing C.P. brass waste pipe for wash basin 32mm dia complete in all respect.

Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass marked on 6mm thick AC sheet or plywood sheet and fixed to wooden plug with CP brass screws and washer.

Providing and fixing PVC pipe 100mm dia complete in all respect.

Providing and fixing GI Union15mm dia of superior quality complete in all respect.

Providing and fixing GI Eblow 15mm dia of superior quality complete in all respect.

Providing and fixing GI Tee 15mm dia of superior quality complete in all respect.

Providing and fixing GI Socket 15mm dia of superior quality complete in all respect.

Providing and fixing to wall ceiling and floor galvanised mild steel tube, fitting and clamps including making good the same i.e. wall ceiling and flooring 15mm dia

Providing and fixing GI niples of superior quality complete in all respect.

Providing and Fixing of water storage tank sintex having of capacity 500 liters with necessary fittings including over flow pipes, scour pipes etc. inlet and outlet and inside paint of required size for inlet or outlet and inside paint of approved quality complete including hoisting complete in all respects.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required Group C (item No.203)

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.(item No.213)

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.(Item No. 214)

Supplying & fixing metal box of following sizes (nominal size) on surface or in recess suitable for fixing phenolic laminated sheet cover in front including painting etc. as required:-(i)200mm.x150mm.x75mm. Deep (item No. 803)

P/F 5 pin 5/6 amps socket outletporcelain base/ piano type (Itgem No. 905)

P/F 6 pin 15 amps socket outlet,porcelain base/piano type (item No. 906

Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required.(a) S.P. 5/ 6 Amps one way switch, piano type. (item No. 901)

S.P. 15/16 Amps one way switch, porcelain base/ piano type.(item No. 904)

Providing, Installation, testing and commissioning of ceiling fan 1200 mm sweep,(Category-A) with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required(i) Item No. 2501)

Providing and fixing following type of surface mounting decorative mirror optics luminaire with powder coated CRCA sheet steel housing, low glare aluminium mirror reflector, prewired with 110 V starter & 36/40 w copper ballast for housing CFL (but excluding the cost of CFL), complete with all accessories, connections, testing and ommissioning etc. as required. 2 x11 watt-CFL (Category-A)(item No. 2601)

Supplying and fixing of bulk head fitting of all sizes and shapes, containing one No. thread type CFL lamp holder (s), complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. (i) Bulk head fitting, CFL type (Category-A) (Item No. 2711)

Supplying and fixing of 20 mm diameter PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required (item No. 601)

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required (i) 25 Amps. Cat-A. (Item No. 1726)

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.(item No. 1901)

Extra for using salt and charcoal for pipe earth electrode complete as required(item No. 1902)

Supplying and laying 6 SWG G.I. wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required (item No. 1909)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.(i) 2x10 Sq. mm. (item No. 220)

(ii) 2x6.0 Sq. mm.(item No. 219)

(iii) 2x4.0 Sq. mm.

Supplying and fixing of single door 8 way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required (Item No. 1803)

Supply, installation, commissioining and testing of Vaccum operated, pressuer feed gaseous chlorinator of Toshcon Jesco/Capital make for chlorination of water by direct feeding to existing water main consisting of the following components in all leads and lifts as per specification below:- Providing installation & commissioning of gaseouos type fully vaccum chlorination system having 0-1.0 kg per hour chlorine gas feeding capacity of PENWALT(USA) / ECOCHLOR (USA) / ENCHLOR (USA)/Jasco (USA) make. The system shall have vacuum regulator with inbuilt Filter and Pressure Gauge, in-built Measuring Glass with dose rate adjuster, Vacuum ejector, ejector Non Return Valve, 4.0 m long PE tubing (As Vacuum and Vent tubing), 32 mm Spanner, Ammonia Solution etc. in all leads and lifts and to the entire satisfaction of Engineer-in-charge

(i) Chlorine Gas Injector

Providing installation & commissioning single phase monoblock pump 1.5 to 2.0 HP of required discharge capacity with Motor of Kirloskar/Crompton Greaves make with common steel fabricated base frame duly grouted at site including starter and cabling including all leads and lifts and as per entire satisfaction of Engineer - in - charge

Providing installation & commissioning of ISI marked PVC pipe & fittings, ball valves, Lead washers, O-Rings, G.I. pipe and fitting for installation and grouting of steel stand for ejector of gaseous type chlorination system complete in all respect including all leads and lifts and as per entire satisfaction of Engineer - in - charge

Providing & Installation of gas filled chlorine gas cylinder of 100 kg capacity as per BIS standard duly certified by the petroleum and explosive safety organization Govt. of India for filling of chlorine gas required for the scheme including all leads and lifts and as per entire satisfaction of Engineer-in-charge

Providing and supplying of sefty kit complete in all respect.

ANKUSH VERMA

Tarsem Chand Associates

Anurag Deep