Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.5 LAccepted-AOC | L1 | Accepted-AOC Lowest quoted bidder. | |
| 2 | L2₹38.2 L+₹3.3 L (9.45%)Rejected-AOC | L2 | Rejected-AOC Higher quoted bidder. | |
| 3 | L3₹39.1 L+₹4.2 L (11.9%)Rejected-AOC | L3 | Rejected-AOC Higher quoted bidder. | |
| 4 | L4₹40.7 L+₹5.7 L (16.4%)Rejected-AOC CANTT ROAD KASHNI BIN PITHORAGARH UTTARAKHAND 262520 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262520 | L4 | Rejected-AOC Higher quoted bidder. |
Tender Value
₹38.8 L
EMD Value
₹78,000
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Pithoragarh
GE Pithoragarh Post Bharkatia Pithoragarh ( UK)PIN-262520
PROVN OF UNIT MANDIR AT MIL STN PITHORAGARH
2022_MES_527240_2
8474/PGH/E8
Open Tender
Civil Works
Item Rate
240 days
GE (MES) Pithoragarh
Class D, Category a(i)
6 documents required · 6 mandatory
₹500
GE Pithoragarh
₹78,000
Yes
10 Oct 2022
30 Jun 2022
28 Jul 2022
30 Jun 2022
26 Jul 2022
7 Jul 2022
60 days
Amount
DESCRIPTION OF ITEMS
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc and getting out in soft/disintegrated rock complete all as specified and as directed.
Excavation in post holes (or similar holes) in soft/disintegrated rock each not exc. 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25cm in soft/disintegrated rock and getting out complete all as specified.
Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.
Returning filling including spreading, leveling, watering and well ramming in layers n exc. 25cm complete all as specified and as directed.
Filling under floor (except material) including spreading, leveling, watering and well ramming in layers n exc. 25cm complete all as specified.
Removing excavated material n. exc 50 and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.
M&l for anti-termite treatment of the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square meter of vertical surface (Area of the substructure in contact with backfill to be measured).
M&l for anti-termite treatment of top surface of filled earth at the rate of 5 litre per sqm of surface complete all as specified & directed.
M&l for anti-termite treatment of the soil under plinth protection at the rate of 5 litre per sqm of surface complete all as specified & directed.
M&l for anti-termite treatment of the soil along with external perimeter of building at the rate of 2.5 litre per meter complete all as specified & directed.
M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in surface channel and drain complete all as specified & directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed.
M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified & directed.
Supply & Fix 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S&f 30mm thick second class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges for receiving glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.24 (a) complete all as specified and directed.
M&l for RCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L, providing cement concrete1:2:4 type B1 as in, coping, benching, bressumers, steps, incl necessary form work complete all as specified and as directed.
M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in slabs supported on walls, beams and columns etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in chajjas complete all as specified and as directed.
Use & waste of form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc rough finished surfaces of concrete flat complete all as specified and as directed.
Use & waste of form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) for rough finished surfaces of concrete flat complete all as specified and as directed.
Use & waste of form work to chullah hoods, chajjas and similar items incl edges rough finished surfaces of concrete flat complete all as specified and as directed.
Use & waste of for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide complete all as specified and as directed.
Use & waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for rough finished surface of concrete complete all as specified and as directed.
Use & waste of form work to sides of pillars, posts, struts, columns for rough finished surface of concrete complete all as specified and as directed.
M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality complete all as specified and as directed.
Ditto all as per Item No 30 above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
M&L providing cement concrete 1:2:4 of type B0 using 12.5 mm graded stone aggregate 40mm thick as in damp proof course to horizontal or slapping or vertical incl. necessary form work and applying evenly a coat of blown type bitumen at the rate of 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete all as specified and as directed.
M&L providing 25mm thick cement concrete 1:2:4 of type B0 using 12.5 mm graded stone aggregate as in sub base to flooring complete all as specified and as directed.
M&L precast cement concrete Block Masonry with solid blocks type C1 1:3:6, 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .
M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 finished fair and even complete all as specified and directed.
M & L 15 mm thick cement plaster on other than fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete all as specified and directed.
M&l for providing and applying plaster of paris putty of 1mm thick over ceiling plastered surface to prepare the surface even and smooth complete all as specified and directed.
Supply only water proofing compound, complete all as specified and directed.
M&L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for cement concrete type E2, 1:5:10 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed.
M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protection finished even and smooth without using extra cement including forming necessary joints 12mm wide to the full depth of PCC at every 3 metre and at change in direction complete all as specified & directed.
S&F 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125mm long-06 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6, type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.
S&F 1.25 mm thick Pressed steel frame size 105 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125mm long-06 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6, type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast ,in window cill or door cill, steps, coping kneelers, apex stone, pier caps stone set in CM 1:6 etc complete all as specified and directed.
M&L preparation of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
S&F 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.
S&F mild steel barrel tower bolt stove enameled black 200 mm size with bright bolt complete all as specified and directed.
S&F mild steel pressed handle oval type 150 mm size, stove enameled black complete all as specified and as directed .
S&f aluminium handles 150mm size, cast type, anodised complete all as specified and directed.
Supply & Fix 300mm long Mild steel sliding door bolt , plate type stove enameled black with bright bolt not less than 16mm dia with and including minimum of 6 bolts and nuts four on plate and two on staples plat and fixed complete all as specified and directed.
S&f 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel tower bolt complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel tower bolt, complete without glazing bars, dovetailed or welded complete all as specified and directed.
S&F Steel ventilators, top hung, with glazing bars with hinges and peg stay etc complete all as specified and directed.
S & F M.S. Framed work such as grills grating etc. with ends of bars sholdered and / or riveted into spikes, framed guard bars / railings and similar work conforming to Fe-410-o or Fe-310-0 complete all as specified & directed.
S&F sheet glass 5.5 mm thick ordinary quality and glazing with rubber neoprene packing in square n.exc 0.5 sqm in each pane complete all as specified and as directed.
S&F sheet glass 5.5 mm thick ordinary quality and glazing with rubber neoprene packing in square exc 0.5 sqm in each pane complete all as specified and as directed.
S&f 12mm thick prelaminated particle board exterior grade, prelaminated both side with decorative choice lamination fixed with screw to timber or aluminium frame work complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of bar and 1.18 mm average width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed.
Preparation of new plastered surfaces and applying two coat of oil bound distemper over and including a layer of wall care putty to achieve a smooth finish surface (average thickness 2 mm) complete all as specified and directed.
M & L preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
S&F non-skid joint free ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but n exc 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
M & L glazed ceramic coloured tiles 7 to 8 mm thick area exc 0.06 Sqm but n.exc 0.16 Sqm on walls etc set & jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces over & incl 10mm thick rendering in cement mortar 1:4 for laying wall tiles etc complete all as specified and directed.
M&l rubber moulded exterior grade joint less coloured tiles 10mm thick, area exc 0.06 sqm but n. exc 0.38 sqm with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for two coats of exterior emulsion paint (weather coat) over a coat of primer over a thin layer of external wall putty 1mm thick to achieve a smooth finish surface over newly plastered surface of wall complete all as specified and as directed. Note: The tint/shade of the paint shall be as approved by the GE.
S&f door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and directed.
S&f double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel complete all as specified and directed.
S&F anodized aluminium door & frame powder coating (minimum thickness of powder coating 50 micron) fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No floor spring for each shutter complete all as specified and directed with following specifications :- (a) Aluminium door frame =101.50x44.45mm (b) Aluminium style/top & middle rails of shutter=83.5x44.45mm (c ) Aluminium bottom rail of shutter=114.50x44.45mm (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed.
S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing,handles 2 Nos in each door ,hinges anodised aluminium snap beading, screws etc. complete all as specified and as directed.
S&F standard aluminium section powder coated any colour as approved for window frames/shutters sliding/ partitions etc including jointing cleat and rubber beading/lining, Pivot ,locking arangement and all hardware etc and fixed in position with stainless steel screws all as specified and as directed.
S&f powder coated aluminium grill of approved design/pattern with minimum anodic coating of grade AC15 of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and as specified and directed.
S&f Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed.
M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.
M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, in ridges, hips, valley gutters, drip and straight flashings to wall, fixed with self tapping screws all as specified and directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified & directed.
M&L for rolled sections as in framing for cladding, stiffener,glazing and the like fixed with angle cleats and connecting plates, etc complete all as specified and as directed.
M&L for rolled sections as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 complete all as specified and directed.
M&l Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & directed.
Supply & fix purpose made screw bolts with hexagonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut 16-20 mm dia and exc. 10 cm and nexc. 15 cm long complete all as specified and as directed.
S&F 15mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
S&F 20mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
S&F 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capstone head, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F 15mm bore dia Bib taps chromium plated with capstone head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .
S&f 20mm to 25mm thick hard wood 2nd class weather boarding clean sawn and rebated on thick edge to give 25mm laps and wrought both side and edges shot and chamfered fixed to roof height of bldgs complete all as specified and directed.
S&f 24mm thick factory made solid PVC flush Kitchen CB shutter/shutter, PVC, made from coextruded three layer rigid foam sheet (single extruded process) with 0.8 to 1mm thick outer face layer having density not less than 1400 kg/cum and density of central core material not less than 600kg/cum, manufactured by an ISO 9001:2015 certified company and fixing in frame at site with and including 03 nos SS hinges, 02 Nos SS fancy handles, 02 Nos SS tower bolts, Ball catches with 8mm dia steel ball and brass body and striking plate including letting and inbuilt locking device with Key etc for Cup board/Kitchen cabinets as per specification and drawing complete all as specified and directed.
S&f solid WPC door frame of size 63mmx 50mm with decorative laminates in opening of cup board as per specification complete all as specified and directed.
S&f stainless steel pipes 50mm dia of grade 202 medium as in framed work such as sign boards/railing etc, all necessary welding, drillings or reveting, brackets, stoppers and including embedding the same in PCC 1:3:6 type C1 below ground level size of PCC (450x450x600mm) including excavation in soft/disintegrated rock complete all as specified and as directed.
S&f aluminium Hat and coat peg set of 6 pegs complete all as specified and directed.
M&l for providing precast cement concrete type B1 (1:2:4) 20mm graded stone aggregate as in landings cover slabs (for manholes etc) chullah hoods, chajjas, water throughs, shelves and similar articles set in cement mortar (1:6) complete all as specified and directed.
S&f decorative curtain rods made of MS pipe covered with coloured PVC layer, dia of pipe 25mm with decorative ends complete all as specified and as directed.
M&l Makrana white Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding exposed edges complete all as specified and as directed.
Supply & Fix GI powder coated snap grid frame work for false celling comprising of the following sections for making partitions of 600x600 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 4mm dia GI wire suspender of suitable length complete all as specified and as directed :- (i) main tee of size -32mmx24mmx0.3mm (ii) cross tee of size -26mmx24mmx0.3mm (iii) wall angle - 24mmx24mmx0.3mm
S&f 10mm thick PVC insulation panel with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of amuminium/GI/MS as per specification and drawing complete all as specified and as directed.
S & F rubber moulded vibrated coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade all as specified and directed.
M&l for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
S&F rolled mild steel framed work as in doors frame or gates of angle or other section with gusset plates, rails braces etc, complete drilled for fixing of stele sheeting or other covering. Doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed.
Granite (of any type of coloured) work (table rubbed and polished) 20mm thick in steps jambs,pillars, window cills, cooking platform /partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete all as specified and as directed.
S&f vitreous china counter top wash basin oval shape, size 550x400mm including PVC waste pipe and CP waste coupling fixed on granite slab over RCC slab complete all as specified and directed.
S&f 15mm dia Pillar taps (long nose) ,cast copper alloy,with capstan heads,chromium plated screwed down high pressure ,with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed,complete all as specified and as directed.
S&f soap dish chromium plated any size fixed to plugs with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S&f shelf/corner shelf of PTMT with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300 gms) complete all as specified and directed.
S&F 450mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.
Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills sunshades, shelves, lintels, etc and cutting chases for concealed water tubing and making good, cutting n exc 10 cm girth complete all as specified and directed.
S&F Brass chromium plated Tubular towel rail , 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F rotational moulded polyethylene water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part- I.
S&F 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) complete all as specified and directed.
S&F 50 mm dia PVC (SWR) pipes single socketed in any length including bends and sockets complete all as specified and as directed.
E&M Portion: M&L for point wiring Concealed with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC surface / concealed conduit 20 mm or higher dia, light grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for One light point/Fan point controlled by one, one way switch of 5/6 Amps complete all as specified and as directed.
Ditto all as per Item No 141 above but for one 3/5 pin socket outlet 5/6 Amp on same board with other switch of 5/6 Amp.
Ditto all as per Item No 141 above but for one 3/5 pin 5/6 amps socket outlet point on independent board controlled by one, one way switch of 5/6 amps on independent board.
Ditto all as per Item No 141 above but with 2.5 Sq mm cable (FRLS) for one 15/16 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.
S & F Switch piano, flush type, white finish, 5/6 amps, single pole, one way all as specified and directed.
S&F Switch piano flush type, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.
S&F Socket outlet two in one 5/6 pin, 5 and 15 amps flush type, complete all as specified and directed.
S&F Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps flush type, complete all as specified and directed.
S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.
S&f electronic fan regulator flush type, switch size step type, 230 volts ISI marked complete all as specified and directed.
S&f warm light round surface mounting LED panel with luminaire 6/8 W, with aluminium housing plastic diffuse complete all as specified and directed.
S&f SPARC LED warm light with lininaire 10/12 W, IP65/66 with aluminium housing plastic diffuser complete all as specified and directed.
S&f warm decorative wall light fixture made up of polycarbonate, suitable for retrofit LED 9 W (spiral B-22 Base) complete all as specified and directed.
Supply and fixing warm/cool light LED Integrated Batten T5 box type surface mounted, (1x20 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.
Supply and fixing warm/day light LED Integrated Batten T5 box type surface mounted, (1x09 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.
S&f 30 watt LED building security light fitting, PDC housing, IP-65 with 4 KV inbuilt surge protection driver, pressure die-cast aluminium including fixing the same on GI pipe 25mm dia bore light grade bracket, 1.5 mtr long including necessary cutting/bending/welding and fixed the same with two nos flat iron clamps of 40x4mm duly painted and fixed with suitable size nut & bots etc and making electric connection with PVC three core copper flexible wire complete all as specified and directed.
S&f 30 watt flood light LED fitting Warm/day cool as required, IP 65 protection with high power LED complete with including provn of flexible three core cable from ceiling rose to fitting terminal for making electrical connection, fixing the fitting on wall including all necessary fixing accessories with nuts and bolt complete all as specified and directed.
S&f cone round post top lanterns LED fittings suitable for 25 watt LED fittings, prewired with fixing arrangement complete all as specified and directed.
S&f flexible 5 mtr LED strip 22 W, 3000K/6000K as required on site with driver, wide viewing angle for good light distribution, easy to install all as specified and directed.
S&f warm light recess/surface mounting LED 2X2 luminaire 36 W, slim ceiling light with extruded aluminium housing and milky diffuser complete all as specified and directed.
S&f focus light LED 10W mounting LED panel with luninaire 6/8W, with aluminium housing powder coated die cast aluminium reflector with clear diffuser fully adjustable complete all as specified and directed.
Supply and laying XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 3 core x 4 Sqmm including laying, testing and commissioning complete all as specified and directed.
Supply and laying XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 4 core x 25 Sqmm including laying, testing and commissioning complete all as specified and directed.
S&F MCB DB sheet metal enclosure for DB, SPN, 12 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.
Supply and Fix MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.
Supply and Fix MCB single pole & Neutral 240 volts, 40 amps, of 10 KA complete all as specified and directed.
S&f wall mounted fan of size 450mm AC single phase 230/240 volts complete all as specified and directed.
S&f ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor(BLDC) complete all as specified and directed.
M/s Rana Enterprises
RAMESH ADHIKARI
m/s vishnu kumar agarwal
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .