Gomti Nagar Sthit Dr Ram Manohar Lohiya Park Waterbody Part-1 main Play Fountain va Children Play Area ka Nirman avam 05 Varsho ke Varshik Anurakshan va Sanchalan ka Karya.

Part-(A)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge., All kinds of soil

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement, All works upto plinth level, Concrete of M30 grade with minimum cement content of 350 kg /cum

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form work for :, Foundations, footings, bases for columns.

Centering and shuttering including strutting, propping etc. and removal of form work for :, Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc..

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete., Fixed to openings /wooden frames with rawl plugs screws etc.

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge.

M.S Iron work for R.C.C or R.B work.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :, 150 mm dia. R.C.C. pipe

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:, Cement mortar 1:4 (1 cement : 4 coarse sand)

Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.l. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:, With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality, M D - 10, Circular shape 500 mm internal diameter

12 mm cement plaster of mix :, 1:4 (1 cement: 4 coarse sand)

Trenching and Back Filling. Sanctioned Rate. Along the perimeter

Supply of 4Mtr height decorative pole made of mild steel/steel tube complied with IS1161/IS 3601, minimum thickness of 3mm. (chemical and Mechanical test report shall submited) The pole shall have two section, base section having length of IMtr with dia of 140mm and top section having length of 3mtr with dia of 76mm Pole shall be mounted on square base plate of dimensions 200*200*12mm thickness with 4 nos of slots, having distance of 141mmx141mm and size of 20x35mm. The base section of Pole shall have an in-built junction box to accommodate a heavy duty connector for loop-in and loop-out of UG cable and provision for MCB with anti-theft lock arrangement. The Pole Shaft should be fabricated out of Steel tube of grade YST 240. Structurally designed base plate of Steel A36/A572-50 or equivalent should be welded with the pole shaft. The complete structure shall be hot dip galvanized through 7 stage process and single dip process as per ASTM A123 and minimum average coating shall not be less than 65 microns(Test report shall be submitted) before traeting with primer. After galvanisation structure shall be treated with two coats of high quality primer and thereafter coated with Polyurethane paint to minimum average DFT of 100 microns(Test report shall be submitted). The pole shall be designed as per EN40 for withstand basic wind speed of 169kmph. The complete structure should be hot dip galvanised Kesslec Ecopole 4 mtr GI PU Painted with Base plate, MR.

Supply and fixing of OVER 600 mm long aluminium dia cast body post top is mounted at the top with polycarbonate diffuser and fitted with 40w led disc bis registered make philips, bajaj, twinkle, lustore or equivalent repuateted make PSR BOND: CE/490/2024

Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in all respect.

Supplying and laying 6 SWG G.l. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with Gl thimble etc. as required.

Supply and fixing of horizontal air termination (roof conductor) of 25mm x 3mm copper strip, on G.I. clamps on surface complete in all respects as approved by Engineer-in-charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead., For thickness of tiles above 25 mm and up to 40 mm

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.., In cement mortar

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc., 6 sq. mm 4 core

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc., 25 sq. mm 3-1/2 core

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc., 70 sq. mm 3-1/2 core

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect., 40 A TPN

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting jointing etc. in the existing trench, complete as required., 63 mm dia (CD-63 mm & ID-51 mm nominal)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting jointing etc. in the existing trench, complete as required., 90 mm dia (CD-90 mm & ID-76 mm nominal)

Supply of pipe ring with fitting outer ring dia. 40ftwith water distribution manifold, make - RWT

Supply of pipe ring with fitting outer ring dia. 25ft. with water distribution manifold, make - RWT

Supply of pipe ring with fitting outer ring dia. 15ft. with water distribution manifold, make - RWT

Supply of pipe ring with fitting outer ring dia. 5ft. with water distribution manifold, make - RWT

Supply of Jet Nozzle 'A inch

Supply of conceal 12 V18 watt Under Water Led Light

Supply of control voltage driver with Power supply complete set

Supply of sub. Open well Pump 10 HP, with complete fitting.

Supply of sub. Open well Pump 7.5 HP, with complete fitting.

Supply of sub. Open well Pump 5 HP, with complete fitting.

Supply of sub. Open well Pump 3 HP, with complete fittings.

Supply of Complete plumbing required for the Fountain, header for, Manifold water Distribution system, ball joint, Gate Valves (ISI) pipe 3 Inch, UPVC Pipe 10 kg. pressure - Finolex /Supreme ) vertical adjustment, with fitting MOS/GM etc.

Supply of Control panel made of 16 gauge CRC sheet powder coated with starter, single phase prevention, MCB volt-meter. Amp. Meter, TP MCB’s protection Circuits etc. Make RONDEVOUZ (L & T ABBHavers/Cutler / Hemmer

SITC RWT Fountains Controllers

VFD (15 HP )

VFD (10 HP )

VFD (7.5 HP)

14 1 VFD (5 HP )

Amplifiers: amplifier (400 W )

Speakers: 200 watt speakers Bose

Channel mixer

Speaker Wired

1.1 kV grade double insulated copper flexible cable 2.5 sq.mm x 3 core for pumps, Make: Finolex/Havells/Polycab/Rellison PSR (J.M.P)

1.1 kV grade double insulated copper flexible cable 1.5 sq.mm x 4 core for pumps, Make: Finolex/Havells/Polycab/Rellison PSR (J.M.P)

Installation & testing Complete labour Cost

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge, 25 mm average thickness

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge., Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 :, 300 mm dia Ductile Iron Class K-7 pipes

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :, 300 mm diameter, Class I

Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-Charge.

Supplying and stacking of good earth at site including royalty and carriage upto 20 km lead and lifts (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment).

Mixing earth and sludge or manure in the required p

roportion specified or directed by the Officer-in-charge

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

Fine dressing of the ground.

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water), Hedge Plant /Ground cover

Providing and stacking of Murraya exotica of height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge.

Providing and Displaying Acalypha red well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.

Providing and stacking of Chandni dwarf of height 15-20 cm., well branched in earthen pots of size 20 cm as per direction of the officer-in-charge. s per direction of the officer-in-charge.

Providing and stacking of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and displaying of Raphis palm having ht. 75 cm to 90 cm with 12 to 15 equal suckers, well developed, full of fresh & healthy leaves from bottom to top in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge.

33.01 (Jal Nigam Varanasi SOR) 63mm dia HDPE Pipe PN-6: ClassPE-100

'PROVING OF HDPE PIPE DN 90MM PE-100 (SDR-21) AS PER IS:4984:2016 (ISI MARK) with Pressure rating of 6Kg/cm2 or More). All complete as per specification and direction of Officer in charge

Supply, Installation, laying & commissioning Of ELBOW JOINT 90 DEGREE FOR 90 mm HDPE pipe. Sanctioned rate

Supply, Installation, laying & commissioning Of ELBOW JOINT 90 DEGREE FOR 63 mm HDPE pipe. Sanctioned rate

3" Cl butterfly valve

Supply, Installation, laying & commissioning Of for 63 mm TAIL PIECES

Supply, Installation, laying & commissioning of for 90 mm TAIL PIECES HDPE

Supply, Installation, laying & commissioning Of Ball Valve for 25 mm pipes

Supplying and living of 1 our Seater Swing with sparrow outdoor Playing equipment including necessary fittings. T&P etc all complete in direction of engineer in charge. (Model No. FPSW 10. Make Fun Play/ Kompain/Arihant) Rate 55810.00

Supplying and Fixing of Standered Multi seater See Saw outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPSS12, Make Fun Play/ Kompain/ Arihant)

Supplying and Fixing of Turbo Tower Outdoor Playing Equipment Including Necessary Fittings. T&P ete all Complete in Direction of Engineer in Charge. (Model No. FPCL35, Make Fun Play/Kempain' Arihant) Rate 43945.00

Supplying and Fixing of Monkey Climber Outdoor Playing Equipment Including Necessary Fittings, T&P ete all Complete in Direction of Engineer in Charge. (Model No. FPCL43, Make Fun Play/Kompain/ Arihant) Rate 49438.00

Supplying and Fixing of Balancing Bridge outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPTH41, Make Fun Play/ Kompain/ Arihant)

Supplying and Fixing of Four Seater Merry Go Round Outdoor Playing Equipment Including Necessary Fittings, T&P etc all Complete in Direction of Engineer in Charge. (Model No. FPMR11, Make Fun Play/ Kompain/ Arihant) Rate 50756.00

Supplying and Fixing of 7' Ht. FRP Wave Slide Outdoor Playing Equipment Including Necessary Fittings, T&P etc all Complete in Direction of Engineer in Charge. (Model No. FPSD51, Make Fun Play/Kompain/ Arihant) Rate 71960.00

Supplying and Fixing of Frog Bin - FRP outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPDB11, Make Fun Play/ Kompain/ Arihant)

Supplying and Fixing of Imperial Bench 4' outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPGD11, Make Fun Play/ Kompain/ Arihant)

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :, Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)

Part-(B)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Operation and Maintenance of 1st year (0.5% Of total estimated cost 1,63,05,902.00)

Operation and Maintenance of 2nd year (1% Of total estimated cost 1,63,05,902.00)

Operation and Maintenance of 3rd year (1.5% Of total BOQ 1,63,05,902.00)

Operation and Maintenance of 4th year( 2% of total Estimated cost 1,63,05,902.00)