Special repair of SMY Khegsu Distt. Kullu, H.P. SH- Special repair to toilet block

Amount

Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within 20 metres lead (wooden / concrete joists to be measured and paid for seperately) complete as per architectural drawings and the directions of Engineer-In-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) For thickness of tiles upto 25 mm

Providing and laying cement concrete 1:3:6 (One cement: Three sand :Six graded cursed/broken stone aggregate 40mm) (forty millimeters nominal size) mechanically mixed and curing complete, excluding cost of form work in foundation and plinth including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and laying spartic ceramic tiles (non slippery ) of Kajaria./ nitco or its equivalent, size 300 x 300 mm ( three hundred into three hundred millimeters ) x 5.5mm ( five point five millimeters ) thick in treads of steps laid on a bed of 12mm ( twelve millimeters ) thick cement mortar 1:3 ( one cement : three sand ) finished with flush pointing in white cement complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying white / coloured glazed tiles of size 30x45cm(thirty into forty five centimetre) and 6mm (six milimetre) thick in skirting riser of steps and dado on 12mm(twelve milimetre) thick cement mortar 1:3(one cement:three sand) and jointed with cement slurry complete in all floors and heights as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges

Providing and fixing to wall ceiling and floors galvanized mild steel tubes (medium grade) with clamps including making good the wall ceiling and floors ISI marked as per HP.PWD specification, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . a) 15mm

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Fixing water meter stop-cock 15mm nominal bore in galvanised mild steel tube including necessary fittings such as mild steel galvanised jam nut, sockets, etc. cutting and making long screws complete (water metre and stop-cock to be measured and paid for separately) complete including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing vitreous China wash down, water closet Anglo Indian Universal coset of Hindware (European type. W.C. pan) Cat No.20049 of Hindware or its Equivalent with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately) including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing PVC low level flushing cistern. 10.00 liters capacity (full flush) European standard control with a pair of C.I. brackets ,With fittings such as lead valve syphon, 15mm nomilal size PVC ball valve with polythene flot ,with push botten, coupling for connection with complete with inlet, outlet and overflow pipes ,40 mm dia C.P. flush bend etc. complete.No. 2603 of CERA/ HINDWARE including carriage of materials through all modes of transportationswith in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers SOLID TYPE white plastic seat and cover including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

Providing and fixing Galvanized Iron inlet connection of JAL/ESS/JAQUAR make or its equivalent for flush pipe with Water Closet pan), as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges .

Providing and fixing viterous china squatting plate pattern Urinal of size 450x350mm(four hundred fifty into three hundred fifty milimeter) Hindware or its Equivalentwith integral longitudinal flush pipe including fittings complete in all respect including brackets and all accessories as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts.

Providing and fixing C.P. brass flush pipe /spreaders for urinal with fitting such as unions,clamps etc. (all in C.P. Brass) including cutting holes and making good the same :-15mm (fifteen milimeter) nominal bore as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.

Providing and fixing of Viterous China wash basin of size 630*450 (Six hundred Thirty into Four Hundred fifty ) millimetres (FLAT BACK)without pedestal in white shade of Cera make or its equivalent with single hole for pillar tap with Cast Iron or Mild steel brackets painted white including cutting holes in walls and making good the same including fittings complete in all respect including brackets and all accessories as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts.

Providing and fixing of Viterous China pedestal in white shade of Cera or its equivalent with single hole for pillar tap with including fittings complete in all respect including its all accessories, as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts.

Providing and fixing rubber plug for sink or washbasin including fittings complete in all respect including its all accessories, as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts.

Providing and fixing 32 (Thirty Two) millimetres dia brass waste ( ISI marked) for wash basin or sink as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing G.I/M.I Union 32 (Thirty Two) millimetres diametre ISI marked , complete in all respect as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.

Providing and fixing C.P. Brass S. Trap for wash basin and sink 32mm dia including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing C.P. Brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. Brass screws 750mm x 20mm including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing Glass shelf 600x120 mm(six hundred into one hundred twenty milimeter) of Cera or its equivalent, as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing chromium plated Toilet Paper holder with Flap of Cera or its equivalent, as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts.

Providing and fixing Viterous China Recessed Soap Tray of size 150mmx150mm etc. of Cera make or its equivalent, as per HPPWD specifications, including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous China Cera or its equivalent, as per HP.PWD specification including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing Brass bib tap with Capstan head 15mm dia Cera or its equivalent, as per HP.PWD specification including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing C.P. brass bib tap with Capstan head 15mm dia of Cera or its equivalent, as per HP.PWD specificationincluding carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing 15mm (fifteen milimeter) C.P. stop cocks of Cera or its equivalent, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing various capacity.store well branded ISI marked Polythene water tank with 40 (Forty) millimetre nominal size bore galvanized Mild Steel scour tube with fitting 25 (Twenty Five) millimetre nominal bore galvanized Mild Steel overflow tube with fittings and mosquito proof coupling of approved municipal design 15 (Fifteen) millimetre nominal size ball valve and mosquito proof PVC cover with locking arrangement including providing pads of size as required for inlet and outlet tube complete ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads lifts and all incidental charges. a) 1000 litres net capacity tank

Providing and fixing PTMT Coloured / white automatic flushing cistern of Cera make or its equivalent with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over flow pipe to be measured and paid for separately) as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads lifts and all incidental charges. a) 5 litres net capacity

Providing and fixing PTMT jet spray of approved quality and colour with 1.5 m ( one point five metre) tube of approved make as per HP.PWD specification, including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

SUDHEER CONSTRUCTION

RISHABH THAKUR