National Institute of Technology Uttarakhand

ABSTRACT OF COST

SL NO DESCRIPTION TOTAL DSR AMOUNT TOTAL NON DSR AMOUNT TOTAL AMOUNT (IN Rs)

SL NO DESCRIPTION TOTAL DSR AMOUNT TOTAL NON DSR AMOUNT TOTAL AMOUNT (IN Rs)

1.0 FURNITURE and WORK STATION 0.00 5306894 5306894

2.0 Foldable cum portable STAGE 0.0 23150290 23150290

ESTIMATE COST PUT TO TENDER 28457184

Signature of the Contractor 1 Ravindran.T Digitally signed by

Tender For Construction of additional Exhibition cum convention Hall at KTPO premises, Whitefield, Bengaluru-package- 2

Schedule of quantities for Furniture and work stations

Name of work: PROPOSED EXHIBITION CUM CONVENTION HALL AT KTPO PREMISES- BENGALURU (PACKAGE-2)

FURNITURE and WORK STATION

DSR- RATE AMOUNT

SR. 2016 Description Unit QTY

DSR NDSR DSR NDSR

1.0 NS RECEPTION TABLE

Reception table along with chair, side and back unit

Supply and Installation of Kingsley Premium main table of size 1800 X 750mm completely made up of Prelam

particle board conforming to IS : 12823 Interior Grade with PVC edge banding. Top are with 25mm thk boards

with 2mm PVC edge banding with enhanced scratch resistance supported on 25mm thick at Gable ends and

18mm thick Modesty panels. exposed edges are in 2mm thk PVC edge banding & sealed edges are in 0.8mm

thk PVC edge banding. Wire routing / wire management groumets shall be provided on main or side table as

specified by Engineer in-charge. Kingsley Premium return table of size 900x450mm) completely made up of

Prelam particle board conforming to IS : 12823 Interior Grade with PVC edge banding. Top is in 25mm thk

baord with 2mm PVC edge banding supported on 25mm thk at Gable ends and 18mm thk. Modesty panel.

Exposed edges are in 2mm thk PVC edge banding & sealed edges are in 0.8mm thk PVC edge banding.

groumets shall be provided on main or side table as specified by Enginerr in-charge and as per drawings. Nos 2.00 74298 148596

Supply and Placing the Storage with OPENABLE SHUTTERS - 750X425X700mm with body made of 18mm

thick pre laminated partical Board conforming to IS : 12823 Interior Grade, The back of the unit is made from

9mm pre-laminated board. All the exposed edges are with 2mm PVC egde imported banding & sealed edges

are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick

PVC edge banding. The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware

and Hinges are from Hettich/Ebco.

2.0 NS THREE SEATER SOFA

The seat , armrest & backrest assembly shall consists of a Pine understructure with plywood

frame consisting layers of foam with wadding. The complete assembly shall be covered with

Leatherette upholstery .The size of seat shall be: 55.0cm. (W) X 55.0cm. (D) X 22.0cm. (T)

Approx. The size of back shall be: 55.0cm(W) X 35.0cm. (H) X 22.0cm. (T) Approx. Elastic

Webbing is used to give a soft contour to the seat . It consists of a fabricated inner-frame

hardboard assembly with layers of foam. The hardness of the P.U. foam= 16-20 Kgs. on Nos 4.00 49505 198020

Hampden m/c for 25% compression of the foam. The rectangular leg is made of wood and 4

tier packing is used to minimize damage & reduce wastage. Overall Dimensions of Chair shall

be Seat Width - 54.5 cm, Height - 82 cm, Total width - 91 cm, Total length - 204 cm.

Dimensions tolerance / variations shall be within +/- 1 cm.

Signature of Contractor 1 NBCC

Tender For Construction of additional Exhibition cum convention Hall at KTPO premises, Whitefield, Bengaluru-package- 2

FURNITURE and WORK STATION

DSR- RATE AMOUNT

SR. 2016 Description Unit QTY

DSR NDSR DSR NDSR

TWO SEATER SOFA

The seat , armrest & backrest assembly shall consists of a Pine understructure with plywood

frame consisting layers of foam with wadding. The complete assembly shall be covered with

Leatherette upholstery . The size of seat shall be: 55.0cm. (W) X 55.0cm. (D) X 22.0cm. (T)

Approx. The size of back shall be: 55.0cm(W) X 35.0cm. (H) X 22.0cm. (T) Approx. Elastic

Webbing is used to give a soft contour to the seat . It consists of a fabricated inner-frame

hardboard assembly with layers of foam. The hardness of the P.U. foam= 16-20 Kgs. on Nos 3.00 40870 122611

Hampden m/c for 25% compression of the foam. The rectangular leg is made of wood and 4

tier packing is used to minimize damage & reduce wastage. Overall Dimensions of Chair shall

be Seat Width - 54.5 cm, Height - 82 cm, Total width - 91 cm, Total length - 151 cm.

Dimensions tolerance / variations shall be within +/- 1 cm.

4.0 NS CENTER TABLE

Supply & Fixing of Rectangle TableTeapoy - Centre Table - 1100X600X460 mm ht with SS

Understructure with Toughened Glass top with finished eges

5.0 NS SIDE TABLE

Side table of 600x600mm

Supply & Fixing of Square Table of Size 600mm L x 600mm W x 450mm H

6.0 NS TV. UNIT

TV unit of 1800x450x900 htCustomized TV unit as per the site requirement . Maximaum size -

1800x450x900Ht. Manufacutured out of 2nd clads hard wood, polished all as directed by the Nos 3.00 43173 129519

Engineer in-charge

Signature of Contractor 2 NBCC

Tender For Construction of additional Exhibition cum convention Hall at KTPO premises, Whitefield, Bengaluru-package- 2

FURNITURE and WORK STATION

DSR- RATE AMOUNT

SR. 2016 Description Unit QTY

DSR NDSR DSR NDSR

7.0 NS Work Station Curve linear

Work station table at server room, AV control room, security roomSupply and Installation of

Vibrant Plus Workstations CURVELINEAR :Frames :- Vibrant Plus : Vibratn plus with 60mm

frame 1800X1800X1200mm ht with pedestal of 2 Box + 1 File mobile pedestal of below size

and key board tray and cpu trolley with marker and pinup tiles for user Vibrant Plus is

complaint with ANSI/ BIFMA 7.1 Frames Partition thickness is 60mm for stability & higher

wire carrying capacityFrame is made out of 1.5mm thick CRCA sheets Powder coated to a

thickness of 50-60 microns Legs Vibrant straight legs Configurations Linear, 1 way, 2 way,

3 way, 4 way, 120 degreeRaceways Snap-fit mechanism for easy assembly Made out of

0.8mm thick CRCA & powder coated Can be provided below worktop or above worktop Table

tops 25mm thk Pre-laminated particleboards conforming to IS : 12823 Interior Grade.0.8mm

PVC edge banding . Fabric tile Constructed out of 8mm thick Medium Density Fiber Board Nos 9.00 60298 542684

(MDF) and covered with Fabric of choice Glass Tile 4mm Toughened glass fixed within an

aluminium powder coated frame. Two such (double skin) tiles on either side of the frame

complete the assembly. TILES -MARKER TILE -PINUP TILE -MGP TILE FABRICTILE

BOTTOM TILE -LAMINATED FINISH Constructed out of 0.8mm CRCA sheet and finished in

epoxy powder coating. Can be given with plain / perforations/embossed finishes. Magnetic tile

Constructed out of 0.8mm Galvanized sheet and covered with fabric of choice.

Pedestal 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade

400 L X 470 D X 675 H with 2 box and 1 file drawers with centre locking.

Signature of Contractor 3 NBCC

Tender For Construction of additional Exhibition cum convention Hall at KTPO premises, Whitefield, Bengaluru-package- 2

FURNITURE and WORK STATION

DSR- RATE AMOUNT

SR. 2016 Description Unit QTY

DSR NDSR DSR NDSR

8.0 NS WORK STATION LINEAER

Work station table at server room, AV control room, security roomSupply and Installation of Vibrant

Plus Workstations:Frames :- Vibrant Plus : Vibratn plus with 60mm frame 1200X1500X1200mm ht

with pedestal of 2 Box + 1 File mobile pedestal of below size and key board tray and cpu trolley with

marker and pinup tiles for user Vibrant Plus is complaint with ANSI/ BIFMA 7.1 Frames Partition

thickness is 60mm for stability & higher wire carrying capacityFrame is made out of 1.5mm thick CRCA

sheets Powder coated to a thickness of 50-60 microns Legs Vibrant straight legs Configurations

Linear, 1 way, 2 way, 3 way, 4 way, 120 degreeRaceways Snap-fit mechanism for easy assembly

Made out of 0.8mm thick CRCA & powder coated Can be provided below worktop or above worktop

Table tops 25mm thk Pre-laminated particleboards conforming to IS : 12823 Interior Grade.0.8mm

PVC edge banding Fabric tile Constructed out of 8mm thick Medium Density Fiber Board (MDF) and Nos 17.00 36841 626296

covered with Fabric of choice Glass Tile 4mm Toughened glass fixed within an aluminium powder

coated frame. Two such (double skin) tiles on either side of the frame complete the assembly. TILES -

MARKER TILE -PINUP TILE -MGP TILE FABRIC-TILE BOTTOM TILE -LAMINATED FINISH

Constructed out of 0.8mm CRCA sheet and finished in epoxy powder coating. Can be given with plain /

perforations/embossed finishes. Magnetic tile Constructed out of 0.8mm Galvanized sheet and

covered with fabric of choice. Pedestal 18mm thick pre laminated partical Board conforming to IS :

12823 Interior Grade 400 L X 470 D X 675 H with 2 box and 1 file drawers with centre locking.

Signature of Contractor 4 NBCC

Tender For Construction of additional Exhibition cum convention Hall at KTPO premises, Whitefield, Bengaluru-package- 2

FURNITURE and WORK STATION

DSR- RATE AMOUNT

SR. 2016 Description Unit QTY

DSR NDSR DSR NDSR

9.0 NS CHAIR FOR WORK STATION

supply and Installtion of Medium back chairs with Backrest:The cushioned seat assembly shall consists

of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot

pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall

be upholstered with mesh fabric and mounted on the main assembly.Lumber support made up of

injection moulded in black P.P and upholstered with PU foam. Lumber support size 16 cm (W) x 9 cm

(H) at fixed position Size of back shall be (W)-55cm, (H)-58.0cm & size of seat shall be (W)-50 cm x

(D)-44.0cm. Armrest need to provide option of height adjustment . The arm top is made of soft

moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro

1 mechanism, Tilt tension adjustment, The chair shall be provided with pneumatic height adjustment

which shall have stroke of 95 +/- 5 mm.The pedestal shall be made of nylon. it shall be fitted with 5 nos

twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with

castors). The twin wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall

be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from

ground - min 102.5 to max 111.5 cm. Seat height - min 44.5 cm to max 53.5 cm. Dimensions

tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards Locking Nos 30.00 10362 310845

Positions: 1 position, can be locked & unlocked by lever, Tested for 3, 00,000 Cycles as per ANSI

BIFMA X5.1 -2002, Movements of Seat Pan & Back Support complies with BIFMA Section no 7.6

Table 21Gas Lift: Meets DIN 4550 Class 3, Meets ANSI BIFMA performance standards, Tested for 1,

00,000 Cycles Caster:- Options for Nylon 50 mm, Complies to ANSI / BIFMA X 5.1 – 2002, Tested for

1,00,000 Cycles Base:- Type of Base - Nylon, Static Load as per ANSI / BIFMA X 5.1 2.2 – 2002

Clause 7 - 1134Kg, Pitch Circle Diameter - 640mm, Finish - Black MattArmrests:- Armrest Option -

Fixed, Armrest Height from the seat - 175mm, Armrest Width excluding Armpads - 55mm, Arm pad

length - 320mm, Arm pad finish - PP , The above Arm rest comply with ANSI BIFMA X 5.1 -2002

Clause 13.4 Upholstery:- Available in Fabric - Delta Range Fabric: (Delta Orange / Delta Wine Red /

Delta Black): Content: 100% Polyester, Weight:Abrasion: 80,000 Flammability: BS EN 1021-1 1994

(Cigarette) BS 7176:1995 (Low Hazard), Color Fastness to Light: 5+ [BS 1006 (1990)], Rubbing; Dry:

Class 5 Wet: Class 4.5

Signature of Contractor 5 NBCC

Tender For Construction of additional Exhibition cum convention Hall at KTPO premises, Whitefield, Bengaluru-package- 2

FURNITURE and WORK STATION

DSR- RATE AMOUNT

SR. 2016 Description Unit QTY

DSR NDSR DSR NDSR

10.0 NS CONFERENCE TABLE

20 seater conference table Supplying and placing of Conference table with top Size

6420WX3030D X750H mm(per seater). Table Top :- The top of the table shall be made of 38

mm Composite MDF (25mm plain MDF board + 12mm plain MDF) with PVC membrane

0.4mm Thick PVC membrane foil using wrap around technology. The foil is pre-coated with

PU layer for better scratch and wear resistance. 0.6mm balancing laminate on bottom

surface. Understructure :- The legs of the table shall be 25 mm thk , post formed particle

board with round edge. Modesty Panel :- The modesty panel of the table shall be 600mm high

made of 18mm thk prelam particle board. Vertibrae fixed to worksurface from bottom side for

entering wires The wire carrying is facilitated through the hollow space between plastic

components. Access flap provided with provision for concealed switches shall be provided in

closed or open configurations as directed by Engineer in-chjarge. Available in oval or

rectangular table top Minium six-seater configuration with incremental two-seater modules

Signature of Contractor 6 NBCC

Tender For Construction of additional Exhibition cum convention Hall at KTPO premises, Whitefield, Bengaluru-package- 2

FURNITURE and WORK STATION

DSR- RATE AMOUNT

SR. 2016 Description Unit QTY

DSR NDSR DSR NDSR

11.0 NS CHAIR FOR CONFERENCE TABLE

Supplying and placing the Directors Visirors/Medium back chairs with Backrest:- The seat and back

shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric/leatherette and

moulded polyurethane foam all around. The moulded polyurethane foam shall be of density 55+/-5

kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression. The dimensions of seat

shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50 cm(W) x 47.0cm(H).The armrests should

made of black integral skin polyurethane with 40-55 shore hardness and reinforced with M.S insert

.The mechanism of the chair shall have following features : 360⁰ revolving type, Synchro 1 mechanism,

Tilt tension adjustment . The chair shall be provided with pneumatic height adjustment which shall

have stroke of 12 cm. The pedestial shall be injection moulded in black glass-filled Nylon. It shall be

fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65 +/- 1 cm pitch-centre-dia (70 +/-

1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair

shall be, Width of Chair - 70cm, Depth of Chair - 70 cm as measured from pedestal below. Height

from ground - min 92.0 to max 104 cm. Seat height - min 45.0 to max 57.0cm. Dimensions tolerance /

variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards Upholstered with

fabric/leatherette and HR moulded polyurethane foam, Synchro mechanism, 360 degree revolving Nos 20.00 12600 252000

type, Adjustable armrests , Pedestal base with twin wheel castors.Gas Lift: Meets DIN 4550 Class 3,

Meets ANSI BIFMA performance standards, Tested for 1, 00,000 Cycles Caster: NYLON CASTORS :

The twin wheel castors are injection mouled in nylon and diameter of Castor 60 mm. The castors are

tested for 1,00,000 Cycles as per ANSI / BIFMA X 5.1. BASE : NYLON BASE : The base made up of

injection moulded in black glass filled nylon and fitted with 5Nos twin wheel castors. The base is

658mm pitch circle dimeter. The base tested for static load of 1134Kg as per ANSI / BIFMA X 5.1.

Armrests:- Armrest Option - 1D Arms, Armrest Height from the seat - 210-290mm, Armrest Width

excluding Armpads - 85mm, Arm pad length - 250mm, Arm pad finish - PU, The above Arm rest

comply with ANSI BIFMA X 5.1 - 2002 Clause 13.4 Upholstery:- Seat Fabric with the following

properties : Content: 100%Polyester, Weight: 340 GSM, Abrasion: over 30000, Color Fastness to

Light: Adheres to Grade 5 [ISO 105-B02:1997].

Signature of Contractor 7 NBCC

Tender For Construction of additional Exhibition cum convention Hall at KTPO premises, Whitefield, Bengaluru-package- 2

FURNITURE and WORK STATION

DSR- RATE AMOUNT

SR. 2016 Description Unit QTY

DSR NDSR DSR NDSR

12.0 NS MEETING TABLE

12 SEATER MEETING TABLE @ 4200LX1200DX740H [membrane TOP]Table Top - The

Table Top is made of 25mm thick relam particle board confirming to IS 12823 interior grade.

The exposed edges of the table are sealed with 2mm pvc edge banding. The height of the

table top from ground should be 740mm.Legs: The legs are 50 x 50mm thick square pipe

made up of 1.6mm thick CRCA pipe duly powder coated. The powder coating thickness

considered is 50 to 60 microns DFT.The Member: the tie member should be 80x40mm pipe

structure made of 1.6mm thick CRCA duly powder coated. The powder coating thickness

considered is 50 to 60 microns DFT. Structure to fully welded with all arc welding from inside

eliminating manual finishing. None of the welding joints should be visible from outside.Mast:-

The vertical and horizontal of the mast to made up of 1.6mm thick CRCA bent into the 'C'

shape channel. The mast size to be considered as 500x105mm for sharing back to back

cluster. For non sharing cluster the Mast size is 230x105mm. THe mast cover is 0.7mm thick Nos 1.00 83468 83468

galvanised iron sheet. The inner bracket are 3mm thick CRCA. Leg Shoe/Levelers :- The leg

shoe is made up of 100% recycle nylon 6. The shoe helps in mounting of levelers on the legs

by eliminating any welding process. The levelers are made up of Nylon6 with M8 boltsinsert

moulded to take care of any floor undulation.Beam:- The beam is 1.2mm thick CRCA bent in

the forms of C channels with 3mm thick CRCA brackets. The bottom cover is made of 0.7mm

thick GI sheet. All welding is from inside eliminating manual finishing. The beam acts as a

main spine, stiffeners and also cable carrying raceway thus eliminating use of extra material.

The size of the beam is 100mm height and depth of 445mm for sharing, in case of non

sharing the height is 100mm height and 190mm depth.

Signature of Contractor 8 NBCC

Tender For Construction of additional Exhibition cum convention Hall at KTPO premises, Whitefield, Bengaluru-package- 2

FURNITURE and WORK STATION

DSR- RATE AMOUNT

SR. 2016 Description Unit QTY

DSR NDSR DSR NDSR

13.0 NS CHAIR FOR MEETING CHAIR

Supplying and placing the Directors Visirors/Medium back chairs with Backrest:- The seat and back

shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric/leatherette and

moulded polyurethane foam all around. The moulded polyurethane foam shall be of density 55+/-5

kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression. The dimensions of seat

shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50 cm(W) x 47.0cm(H).The armrests should

made of black integral skin polyurethane with 40-55 shore hardness and reinforced with M.S insert

.The mechanism of the chair shall have following features : 360⁰ revolving type, Synchro 1 mechanism,

Tilt tension adjustment . The chair shall be provided with pneumatic height adjustment which shall

have stroke of 12 cm. The pedestial shall be injection moulded in black glass-filled Nylon. It shall be

fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65 +/- 1 cm pitch-centre-dia (70 +/-

1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair

shall be, Width of Chair - 70cm, Depth of Chair - 70 cm as measured from pedestal below. Height

from ground - min 92.0 to max 104 cm. Seat height - min 45.0 to max 57.0cm. Dimensions tolerance /

variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards Upholstered with

fabric/leatherette and HR moulded polyurethane foam, Synchro mechanism, 360 degree revolving Nos 12.00 12600 151200

type, Adjustable armrests , Pedestal base with twin wheel castors.Gas Lift: Meets DIN 4550 Class 3,

Meets ANSI BIFMA performance standards, Tested for 1, 00,000 Cycles Caster: NYLON CASTORS :

The twin wheel castors are injection mouled in nylon and diameter of Castor 60 mm. The castors are

tested for 1,00,000 Cycles as per ANSI / BIFMA X 5.1. BASE : NYLON BASE : The base made up of

injection moulded in black glass filled nylon and fitted with 5Nos twin wheel castors. The base is

658mm pitch circle dimeter. The base tested for static load of 1134Kg as per ANSI / BIFMA X 5.1.

Armrests:- Armrest Option - 1D Arms, Armrest Height from the seat - 210-290mm, Armrest Width

excluding Armpads - 85mm, Arm pad length - 250mm, Arm pad finish - PU, The above Arm rest

comply with ANSI BIFMA X 5.1 - 2002 Clause 13.4 Upholstery:- Seat Fabric with the following

properties : Content: 100%Polyester, Weight: 340 GSM, Abrasion: over 30000, Color Fastness to

Light: Adheres to Grade 5 [ISO 105-B02:1997].

Signature of Contractor 9 NBCC

Tender For Construction of additional Exhibition cum convention Hall at KTPO premises, Whitefield, Bengaluru-package- 2

FURNITURE and WORK STATION

DSR- RATE AMOUNT

SR. 2016 Description Unit QTY

DSR NDSR DSR NDSR

14.0 NS CABIN TABLE MANAGER CABIN

Supply and Installation of Director Cabin Main table of size 1800 (L) x 450(W) x 740(H):-Table Top: - The table

top is Post-laminated for better abrasion and scratch resistance. The Table top is made of Particle Board with

1mm top laminate and 1mm bottom laminate. The complete Table top is 36mm thick. All exposed edges have

2mm PVC edge banding. The colours available are Walnut Bronze/ Acacia Exodus / Black Cherry.Modesty

panel: - The modesty is Post-laminated for better abrasion and scratch resistance. The Modesty is made of

18mm Particle Board with 1mm top laminate and 1mm bottom laminate. All exposed edges have 2mm PVC

edge banding. The colour of the modesty is matching to the table top colour.Understructure :- The

understructure is 200mm wide on one side is 25mm. It is made up of prelam particle board and is black in

colour. The understructure has wire management properties and can carry concealed wires within it. All

exposed edges have 2mm PVC edge banding.Wire Management :- The understructure has the capability of

carrying wires within it. The main table has an access flap arrangement for easy access of switches and sockets

for connecting the gadgets. The access flap cover is made of Aluminum extrusion and powder coated upto 50-

60 microns.Side Table :- 1500 (L) x 450W x 740Hmm Table Top: - The table top is Post-laminated for better

abrasion and scratch resistance. The Table top is made of 36mm Particle Board with 1mm top laminate and

1mm bottom laminate. All exposed edges have 2mm PVC edge banding. The Table top colour is matching to

the main tableModesty panel: - The modesty is Post-laminated for better abrasion and scratch resistance. The Nos 2.00 184120 368240

Modesty is made of 18mm Particle Board with 1mm top laminate and 1mm bottom laminate. All exposed edges

have 2mm PVC edge banding. The colour of the modesty is matching to the table top colour.Understructure :-

The understructure is made of 25mm thick prelam particle board and is black in colour. All exposed edges have

2mm PVC edge banding.Back Storage :- 3000x425x750 -(750(W) x 450 (D) x 740 (H)x4)The back storage has

2 sections; namely; storage unit and display unit (above the storage space). The storage caracass is made of

18mm thick prelam particle board of black colour. The shutters and storage top are Post-laminated for better

abrasion and scratch resistance. The storage top is made of 36mm Particle Board with 1mm top laminate and

1mm bottom laminate. The shutters are made of 18mm Particle Board with 1mm top laminate and 1mm bottom

laminate. The storage back is made of 9mm thick prelam particle board. The shutter and storage top colour is

matching to the main table. The storage is completely handle less and is openable from the top. Al hinges are

from Hettich. One number EBCO premium lock has been considered for the storage. All exposed edges have

2mm PVC edge banding. The storage skirting is of 75mm high, the storage area height is 455mm high and the

display area is 175mm high.

Signature of Contractor 10 NBCC

Tender For Construction of additional Exhibition cum convention Hall at KTPO premises, Whitefield, Bengaluru-package- 2

FURNITURE and WORK STATION

DSR- RATE AMOUNT

SR. 2016 Description Unit QTY

DSR NDSR DSR NDSR

15.0 NS CABITN MAIN CHAIR

Supplying and placing the Directors HIGH back chairs with BackrestThe seat and back shall be made up of

1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric/leatherette and moulded polyurethane foam

all around. The moulded polyurethane foam shall be of density 55+/-5 kg/m ³, and hardness load 15-20 kgf as

per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall

be 50 cm(W) x 59 cm(H).The armrests should made of black integral skin polyurethane with 40-55 shore

hardness and reinforced with M.S insert. The mechanism of the chair shall have following features : 360⁰

revolving type, Synchro multi position mechanism, Tilt tension adjustment . The chair shall be provided with

pneumatic height adjustment which shall have stroke of 12 cm. The pedestial shall be injection moulded in

black glass-filled Nylon. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65 +/- 1

cm pitch-centre-dia (70 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall

dimensions of Chair shall be, Width of Chair - 76.3cm, Depth of Chair - 76.3 cm as measured from pedestal

below. Height from ground - min 104.0 to max 116.0cm. Seat height - min 45.0 to max 57.0cm. Dimensions

tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards Upholstered with

fabric/leatherette and HR moulded polyurethane foam, Synchro mechanism, 360 degree revolving type,2D

Adjustable armrests , multi position locking, tilt tension adjustment, pneumatic height adjustment, Pedestal Nos 2.00 16118 32236

base with twin wheel castors. Mechanism: SYNCHRO MECHANISM : Conventional mechanism with one

lever control for lockand Gas Lift: Meets DIN 4550 Class 3, Meets ANSI BIFMA performance standards, Tested

for 1, 00,000 Cycles Caster: NYLON CASTORS : The twin wheel castors are injection mouled in nylon and

diameter of Castor 60 mm. The castors are tested for 1,00,000 Cycles as per ANSI / BIFMA X 5.1.BASE :

ALUMINIUM BASE : The base made up of injection moulded in black glass filled nylon and fitted with 5Nos twin

wheel castors.The base is 658mm pitch circle dimeter. The base tested for static load of 1134Kg as per ANSI

/BIFMA X 5.1. Armrests:- Armrest Option - 2D Arms, Armrest Height from the seat - 210-290mm, Armrest

Widthcexcluding Armpads - 85mm, Arm pad length - 250mm, Arm pad finish - PU, The above Arm rest comply

with ANSI BIFMA X 5.1 - 2002 Clause 13.4Upholstery:- Seat Fabric with the following properties : Content:

100%Polyester, Weight: 340 GSM, Abrasion: over 30000, Flammability: Adheres to California Technical

Bulletin117 Section E , part 1(CS191-53), Color Fastness to Light: Adheres to Grade 5 [ISO 105-B02:1997].

Signature of Contractor 11 NBCC

Tender For Construction of additional Exhibition cum convention Hall at KTPO premises, Whitefield, Bengaluru-package- 2

FURNITURE and WORK STATION

DSR- RATE AMOUNT

SR. 2016 Description Unit QTY

DSR NDSR DSR NDSR

16.0 NS CABIN VISITOR CHAIR

Supplying and placing the Directors Visirors/Medium back chairs with Backrest:- The seat and back

shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric/leatherette and

moulded polyurethane foam all around. The moulded polyurethane foam shall be of density 55+/-5

kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression. The dimensions of seat

shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50 cm(W) x 47.0cm(H).The armrests should

made of black integral skin polyurethane with 40-55 shore hardness and reinforced with M.S insert

.The mechanism of the chair shall have following features : 360⁰ revolving type, Synchro 1 mechanism,

Tilt tension adjustment . The chair shall be provided with pneumatic height adjustment which shall

have stroke of 12 cm. The pedestial shall be injection moulded in black glass-filled Nylon. It shall be

fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65 +/- 1 cm pitch-centre-dia (70 +/-

1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair

shall be, Width of Chair - 70cm, Depth of Chair - 70 cm as measured from pedestal below. Height

from ground - min 92.0 to max 104 cm. Seat height - min 45.0 to max 57.0cm. Dimensions tolerance /

variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards Upholstered with

fabric/leatherette and HR moulded polyurethane foam, Synchro mechanism, 360 degree revolving Nos 6.00 12664 75984

type, Adjustable armrests , Pedestal base with twin wheel castors.Gas Lift: Meets DIN 4550 Class 3,

Meets ANSI BIFMA performance standards, Tested for 1, 00,000 Cycles Caster: NYLON CASTORS :

The twin wheel castors are injection mouled in nylon and diameter of Castor 60 mm. The castors are

tested for 1,00,000 Cycles as per ANSI / BIFMA X 5.1. BASE : NYLON BASE : The base made up of

injection moulded in black glass filled nylon and fitted with 5Nos twin wheel castors. The base is

658mm pitch circle dimeter. The base tested for static load of 1134Kg as per ANSI / BIFMA X 5.1.

Armrests:- Armrest Option - 1D Arms, Armrest Height from the seat - 210-290mm, Armrest Width

excluding Armpads - 85mm, Arm pad length - 250mm, Arm pad finish - PU, The above Arm rest

comply with ANSI BIFMA X 5.1 - 2002 Clause 13.4 Upholstery:- Seat Fabric with the following

properties : Content: 100%Polyester, Weight: 340 GSM, Abrasion: over 30000, Color Fastness to

Light: Adheres to Grade 5 [ISO 105-B02:1997].

Signature of Contractor 12 NBCC

Tender For Construction of additional Exhibition cum convention Hall at KTPO premises, Whitefield, Bengaluru-package- 2

FURNITURE and WORK STATION

DSR- RATE AMOUNT

SR. 2016 Description Unit QTY

DSR NDSR DSR NDSR

17.0 NS Guard room table of 1200x600

Supply and Installation of Kingsley system with free standing table main table of size

1200x600X740 completely made up of Prelam particle\ board conforming to IS : 12823

Interior Grade with PVC edge banding. Top are with 25mm thk boards with 2mm PVC edge

banding with enhanced scratch resistance supported on 25mm thk. Gable ends and 18mm

thk Modesty panels. exposed edges are in 2mm thk PVC edge banding & sealed edges are in Nos 1.00 8662 8662

0.8mm thk PVC edge banding. Separate provision for mounting switches on the wall adjoining

the tables shall be made by customer as the tables do not come with switch mounting facility.

Wire routing / wire management groumets shall be provided on main or side table as

specified by customer with prelaminated 2d pedestal -400X475X545 with pvc flush handle &

18.0 NS Guard room chair

Providing and fixing Executive Visitor chair The chair frame shall made up of durable powder

coated steel and polypropylene .High density moulded polyurethane padding used for seat.

Fabric upholstery is used for seat and mesh is used for back frame. Chair is black in color.

Seat dimensions should be 47.6 cm(W) x 46.6 cm(D) and back should be 44 cm(W) x 36.5

cm(H). Armrest is a part of the visitor understructure . The Visitor Understructure is with

glides. Overall dimensions of Chair shall be, Width of Chair - 58.0cm, Depth of Chair - 57.5

cm as measured from pedestal below. Height from ground - min 81.5 cm. Seat height - min

45.5 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per

ANSI/BIFMA x5.1 standards Force Deflection 25% 21.5 Kgf/cm, Tensile strength 2.0 Kgf/cm, Nos 2.00 9210 18420

Tear strength 1.0 Kgf/cm, Resilience 60%

TUBULAR FRAME: The tubular frame is cantilever type & made of Dia.2.54cm.(1”)x 14 BG

M.S. E.R.W. tube and black powder coated Armrests:- Armrest Option - Fixed, Armrest

Height from Clause 13.4Upholstery:- Available in Fabric & Leatherette options Delta Range

Fabric:- Content: 100% Polyester, Abrasion: 80,000, Flammability: BS EN 1021-1 1994

(Cigarette), BS 7176:1995 (Low Hazard), Color Fastness to Light: 5+ [BS 1006 (1990)],

Rubbing;- Dry: Class 5, Wet: Class 4.5

Signature of Contractor 13 NBCC

Tender For Construction of additional Exhibition cum convention Hall at KTPO premises, Whitefield, Bengaluru-package- 2

FURNITURE and WORK STATION

DSR- RATE AMOUNT

SR. 2016 Description Unit QTY

DSR NDSR DSR NDSR

19.0 NS Magazine & News Paper Holders

Magazine & News Paper Holders Supply and installation of Customized display rack for

Newspapers of maximum size upto -1800x1200x300mm Structure and Material Specifications

:- The side, top and back panels are made of 18mm thick prelam particle board with

lamination on both sides. The prelam particle board is mounted on the basic frame structure

made out of 2" X 1" thick CRCA pipe. The shelves are made up of 25mm thick Prelam Nos 5.00 12952 64759

Particle board with same lamination on both sides. The complete system is extremely sturdy

and is equipped with 6 levellers to take care of any floor

unevenness. The immaculate detailing, well finished end caps and outer frame of the rack in

matching finish adds to the overall aesthetics.

20.0 NS Hang out Single Cot :

Hang out Single Cot : 2026 X 1000 X 660mm ht Square tube Understructure of size 25 x

25mm made of 1.2 mm MS duly powder coated to 50- 60 microns DFT

Head board, Foot board and Side panel of 18mm thick PLT Nos 3.00 41734 125202

Bed base of 12mm thick prelam particle board.

Bed Side table of size 400X400X415 mm ht

Signature of Contractor 14 NBCC

Tender For Construction of additional Exhibition cum convention Hall at KTPO premises, Whitefield, Bengaluru-package- 2

FURNITURE and WORK STATION

DSR- RATE AMOUNT

SR. 2016 Description Unit QTY

DSR NDSR DSR NDSR

21.0 NS PODIUM WITH 2 mic nad lamp

The PA lectern can work with PA system and conference system. Built-in rated output 60W

Built-in three 4" woofer and one 2" Tweeter

Two flexible gooseneck microphone and Lamp with provision to use with cord less mic

Two MIC, two Line and four AUX inputs and record input and output Nos 4.00 86346 345384

Bass, treble and volume controller, UsB adapter, MP3 player all are integrated and operated

through remote controller

22.0 NS PVC dust bin with lid with blue and green of 120Ltr capacity

PVC dust bin with lid with blue and green of 120Ltr capacity. Shape and mode shall be as

approved by Engineer-In-charge. It shall be with Swing lid type and wheeled typed made out

of 100% Virgin HDPE/PP Material, UV Resistant and Crack Resistant, The Dust bin shall be

DIN EN 840 Certified

22.0 NS Manual Openable type – S.S. Push Can 4 Litter

Manual Openable type – S.S. Push Can 4 Litter capacity manufactured using high-grade

steel manufactured with S S 202 grade with perfect finish and corrosion resistance. Nos 20.00 1438 28753

23.0 NS Manual push Openable type – S.S. Push Can 20 Litter

Manual push Openable type – S.S. Push Can 20 Litter capacity manufactured using high-

grade steel manufactured with S S 202 grade with perfect finish and corrosion resistance. Nos 30.00 3403 102104

24.0 NS Cabinet storage for store room and conference room

Supply and Placing the Storage with body made of 18mm thick pre laminated partical Board

conforming to IS : 12823 Interior Grade, The back of the unit is made from 9mm prelaminated

board. All the exposed edges are with 2mm PVC egde banding & sealed edges are with

0.8mm thick PVC edge banding. The top, side and hinged shutters are sealed with 2mm thick Sqm 165.00 3759 620235

PVC edge banding. The units are assembled by knock down fittings such as Minifix &

Dowels. All the hardware and Hinges are from Hettich/Ebco. PVC edge banding shall be all

as speciifed and as per drawings.

TOTAL COST 5306894

Signature of Contractor 15 NBCC

Tender For Construction of additional Exhibition cum convention Hall at KTPO premises, Whitefield, Bengaluru-package- 2

Schedule of quantities for Movable stages

Name of work: PROPOSED EXHIBITION CUM CONVENTION HALL AT KTPO PREMISES- BENGALURU (PACKAGE-2)

FOLDABLLE CUM PORTABLE STAGE

DSR- RATE Amount

SR. 2016 Description Unit QTY

DSR NDSR DSR NDSR

1.0 NS Movable and portable stage:-

Supply, deliver,install, test and commisisoning demountable, foldable and portable, stage

made out of demountable stages decks of size 244 cm x 122cm with hight adjustable legs

suitable to adjust to 41cm; 51cm; 61cm; 81cm; 91cm; 102cm; 112cm; 122cm height (+/-

variance 2.0cm) all as per specification, drawings and as directed by Engineer in-charge.

The stage also including removable, portable ramps, stair with necessary hand rails and with Nos. 1.00 23150290.00 2,31,50,290.00

provision for adjustable height according top the requirement of stage height all as per

specificsstion and drawings. The stage also include security rails of 106 cm height (+/-

variance 2.0cm), transport cart cum storrage cart etc. all as specificed and as directed by

Engineer-in-charge.

Following items are included

1. Carpeted Stage Deck:244cm (L) x 122cm (W)-56 Nos

2. Stage Frames

(a)Telescopic legs having height adjustments at 41cm; 51cm; 61cm (+/- variance 2.0cm)-set of four-56 sets.

(b) Telescopic legs having height adjustments at 81cm; 91cm; 102cm; 112cm; 122cm height (+/- variance

2.0cm)- set of four-56 sets.

4. Riser Connectors for standard and multiple height Stages:

(a) Riser Unit to Unit connectors - Nos-112

(a) 4ft Sway Braces - for additional safety-12 Nos

(b) 8ft Sway Braces - for additional safety.-12 Nos

(a) 4ft (L) x 106cm (H) (+/- 1.5cm)-06 Nos

(b) 8ft (L) x 106cm (H) (+/- 1.5cm)- 13Nos

(c) U-bracket Guardrail with hand knob for attachment.

7. Steps with Wheels & Guardrails.

(a) Two-Rise Steps with Rails & Wheels, 8" rise (for 16" to 24"H stages), Carpetedl- 02 Nos

(b) Six-Rise Articulating Steps with Rails & Wheels, 8" rise (for 24" to 48"H stages), carpeted - 02 Nos

Signature of Contractor 1 NBCC

Tender For Construction of additional Exhibition cum convention Hall at KTPO premises, Whitefield, Bengaluru-package- 2

FOLDABLLE CUM PORTABLE STAGE

DSR- RATE Amount

SR. 2016 Description Unit QTY

DSR NDSR DSR NDSR

8. Transport Cart cum Storage-10Nos

9. Transport Caddy Utility boxes-04 Nos

10. Guardrail and drape combo caddy; Should hold 18+ guardrails and drapes-01 Nos

11. Ramp Carpeted-01 set

12. Ramp Guardrails

(a) 6' Top mount landing guard rail-01 Nos

(b) 8' Top mount landing guard rail-01 Nos

(c) 6' guardrail for ramp landing-04 Nos

(d) 8' guardrail for ramp landing; -02Nos

13. Ramp Storage Equipment

(a) Storage Caddy for Three 4'w Ramp & Three 3'w Landing Units, Non-Stacking (Capacity: 6 units per caddy) -

(b) Guardrail Truck (Capacity: upto 18 Stage Rails or 14 ea. Ramp Rails with Handrails. -01Nos

Note; The above iytems are bare minimum. The contractor shall quote by considering

successful installation,testing and commisisoning of movable/portable stage in all respect all

as directed and approved by Engineer n-charge. The quoted rate is inclusive all

miscellanous items required for successful installation of stage all as specificeed and

TOTAL COST 23150290

Signature of Contractor 2 NBCC