Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹67.6 LAccepted-AOC 138 CANNING STREET GROUND FLOOR KOLKATA | KOLKATA | WEST BENGAL | L1 | Accepted-AOC lowest | |
| 2 | L2₹68.6 L+₹99,552.25 (1.47%)Rejected-AOC 17 1 ABHOY HALDER LANE KOLKATA | KOLKATA | L2 | Rejected-AOC 2nd lowest | |
| 3 | L3₹69.0 L+₹1.5 L (2.15%)Rejected-Finance 1 1 NORTH ROAD JADAVPUR KOLKATA | KOLKATA | WEST BENGAL | L3 | Rejected-Finance 3rd lowest | |
| 4 | L4₹69.5 L+₹1.9 L (2.89%)Rejected-Finance 344 1 SB GORAI ROAD HILL VIEW PARK NORTH ASANSOL | ASANSOL | WEST BENGAL | L4 | Rejected-Finance 4th lowest |
Tender Value
Refer Docs
EMD Value
₹1.5 L
Closing Date
25 Nov 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer, PMD,PHE.Dte
Office of the Executive Engineer Purulia Mechanical Division,PHE.Dte Ranchi Road,Purulia.
Supply, Delivery and installation of Centrifugal pumping machineries, MCC Panel with others allied works for Augmentation of KASHIPUR Water supply Scheme under PMD, PHE Dte. in the District of Purulia
2022_PHED_419229_1
15/ EE/PMD/PHED OF 2022-2023
Open Tender
MECHANICAL
Item Rate
60 days
Purulia
Please refer Tender documents.
6 documents required · 6 mandatory
₹1.5 L
Yes
23 Mar 2023
4 Nov 2022
28 Nov 2022
4 Nov 2022
25 Nov 2022
4 Nov 2022
Amount
PART A
a)Supply, Delivery at site Multi stage centrifugal Pumping machinery suitable for dry pit installation capable of discharge against total head complete with pump motor set with tyer type coupling and M.S. fabricated channel base etc. as per following specifications: Capacity: 44 m3/hr, Head: 80m Pump Casing : CI Pump Shaft: C40/SS, Impeller : Bronze Base Frame: Frabicated Steel Speed: 1440 to 1500rpm,H.P.= 25 HP Manufacturing standard :IS 6595 (part 1) & IS 5120, Testing : as per IS :9137 Impeller approx maximum 85% of highest OD. Pump should have efficiency above 65% at duty point. Suction × delivery = 80/65mm Make: Kirloskar/ CG/ Mather & Platt/WPIL [MOC, Test Certificate, warranty certificate along with characteristics curve to be produced at the time of delivery] (Mateials should be supplied after taking approval from department.) (All routine test to be performed in presence of EIC before delivery.) Including supply and delivery of channel Base frame, coupling, Tyer type coupling guard and with foundation bolts (for centrifugal pump motor set ) b)Supply and delivery at site of horizontal foot mounted squirrel cage induction motor of suitable rating for driving the pump mentioned above.Power Supply: 415V ± 10% 50HZ ± 6%, 3Ph, Duty: S-1, TEFC, IP55, Class – ‘F’ temp rise limited to class ‘B’ Motor (IS 325) should be ‘ efficiency class: IE3”. (Motor should be 25HP/18.5 KW approximately.) Ambient temp. 50°C Speed: 1500 rpm as syncMake: Kirloskar/ CG/ Mather & Platt/ABB (Mateials should be supplied after taking approval from department.) (All routine test to be performed in presence of EIC before delivery.) (As per quotation)
supply delivery at site & storage following valve, dimension & materials are as per preferred table of ISS. DN-100, MS pipe thickness 5mm for delivery header for 3nos pump (heavy type) (including suction side extention from CWR to suction common header) . (as per site requirement) (materials should be supplied as per requirement of site, no extra material bill be received by the department.)
DN-200, MS pipe thickness 5mm for Delivery common header for 3nos pump (heavy type). (as per site requirement) (materials should be supplied as per requirement of site, no extra material bill be received by the department.)
DN-250, MS pipe thickness 5mm for Suction common header for 3nos pump (heavy type). (as per site requirement) (materials should be supplied as per requirement of site, no extra material bill be received by the department.)
100 mm dia swing check type NRV with PN 1.6 delivery side IS:5312(PART-1) (All routing test including high pressure test to be performed in presence of EIC before delivery.)
Supply delivery of 100mm dia. Butterfly Valve (Wafer type three phase Motorised) as per BS-5155, having body of cast iron as per 1S:210 gr. FG-260, disc of SS Gr CF-8, Shaft of St.steel AISI-410, ‘O’ ring for shaft seal of Nitrile rubber, valves are suitable for PN 1.6 rating. Valves are operated by suitable RotorkK.range (three phase 415 V) multi turn electrical actuator without starter.
100 mm dia sluice valve with PN 1.0 suction side as per IS:14846 spindle of IS 6603 gr12 cr12 (All routing test including high pressure test to be performed in presence of EIC before delivery.)
200 mm dia sluice valves with PN 1.6 at common header of delivery side as per IS 14846 spindle of IA 6603 gr12 cr13 (All routing test including high pressure test to be performed in presence of EIC before delivery.)
200 mm dia swing check type NRV with PN 1.6 delivery side IS:5312(PART-1) (All routing test including high pressure test to be performed in presence of EIC before delivery.)
200 MM Diam PN 1.6 MS dismantling joints with Rubber Compression Ring and adjustable follower flanged complete assembled unit with galvanized stud and nuts.
Supply, delivery & storage of Burden type pressure gauge, 150mm cast AL dial along with DN15 FI impluse line with valve (0-16kg) Make: Fibag/G L Guru.
Supply delivery and storage at site De-watering pump with all equipments with automatic operation level controller float switch , motor, pipe lines and accessories as per requirement. Power rating 0.70KW -1.1KW, outlet size 50mm, discharge capacity 250 LPM, Head-10m, supplying voltage 230V, single phase, 50Hz. Make:- PHE approved make/KSB
Cable for river bed CWR site (i) Supply and delivery at site of 1.1KV grade 16 sq mm XLPE insulated 3 core all. armoured cable as per IS 7098 PT1 02 no each of 30m × 3nos.=180m. (Materials should be supplied as per requirement of site, no extra material bill be received by the department.) (Make: Havels/ Gloster/ Polycab /NICCO) (FOR CENTRIFUGAL PUMPS)
Cable for river bed CWR site (i) Supply and delivery at site of 1.1KV grade 04 sq mm XLPE insulated 3 core all. unarmoured cable as per IS 7098 PT1 01 no each of 30m × 3nos.=90m. (Materials should be supplied as per requirement of site, no extra material bill be received by the department.) (Make: Havels/ Gloster/ Polycab /NICCO) (FOR ACTUATOR MOTOR )
Cable for river bed CWR site (i) Supply and delivery at site of 1.1KV grade 06 sq mm XLPE insulated 3 core all. unarmoured cable as per IS 7098 PT1 02 no each of 30m .=60m. (Materials should be supplied as per requirement of site, no extra material bill be received by the department.) (Make: Havels/ Gloster/ Polycab /NICCO) (FOR DE WATERING PUMPS)
Installation testing and commissioning of centrifugal pumping machinery Pump motor base foundation , with new suction line, delivery line, common header, pipe support, reducer, enlarger, expansion joint, ,valves, valve support, Inter connection with existing delivery pipe line etc, earthing materials, cable tray, saddle, ladder etc. as required. Laying of cable, connection with MCC panel as per direction of EIC & IE rules to complete net finishing of the whole installation. Rate is including hire charges of generator, welding set, fuels, lubricants & gland to complete the job as per relevant IS.Double earthing should be provided in all euipments (including MCC Panel and all pump motors.) connected with 400 + 10% volt and single earthing should be provided in rest of all equipments. (Including connection of common header with the rising main by necessary all erection materials, pipe support, reducer, enlarger, expansion joint, valve support.( charge is Including Withdrawing of existing centrifugal pumping motor set as per requirement from base foundation after decoupling, disconnection all the line i.e. electrical, delivery pipe line, suction pipe line, valve carefully including necessary labour charge hiring charges for lifting arrangement, generator as per requirement of site and as per direction of EIC.) (Any item or accessories not considered in the specification but required to complete the entire installation and operation shall have to be supplied and installed. No extra charge shall be provided for this purpose).
Earthing with 50mm dia G.I pipe 3.64mm thick 3.04mtr long and 1 x 4 swg. G.I with (4mtrs long)13mm dia x 80mm long GI bolts, double nuts,double washers including supplying and fixing 15mm dia G.I pipe protection (1mtr long)to be fitted with bitumen and salt partly under the ground level and partly above the ground level driven to an average depth of 3.65mtr below the ground level and restoring the surface duly rammed.As per direction of EIC.double earthing to be done for each pole. By ISI- Medium GI Pipe
Supplying & fixing earth busbar of galvanized (Hot Dip) Following MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required
Painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper,cleaning etc. for receiving fresh coat of paint(including accessories as per direction of EIC) One coat of red lead/Zinc chromate priming
1st coat of synthetic enamel paint over the primer
2nd coat of synthetic enamel paint over the 1st coat
PART B
Supply & delivery at site alone front access type MCC panel with compartment wise 1.6mm thick and load bearing 2mm CRCA sheet steel enclosed indoor floor mounted dust & vermin proof equivalent to IP-54 degree of protection CPRI approved, epoxy painted with all Neoprene gaskets, cubical type with front & rear lockable hinged door MCC with TPN electrolytic grade L.T. panel on FRP insulators, detachable gland plate at bottom & suitable for installation on cable trenches complete with Al bus bar of suitable size ( 1A/mm2 will be max.) with necessary earthing protection. (above 200A neutral buss bar should be same as phase) Details as per SOQ attached with the NIET
Supply and fitting fixing 415 Volt, four pole, 320Amp MCCB of breaking capacity 50KA with fixed thermal and fixed magnetic/adjustable thermal and fixed magnetic setting in existing SS enclosure with IP 42/43 protection powder coated as per direction of EIC. (Make-ABB/Siemens/Havells) (For CWR site)
Supplying and laying 1.1 KV grade 3.5 core 70 sq. mm XLPE insulated Al. Armoured cable on wall/surface including S&F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot dip) wire making whole etc as necessary mending goods damages and painting (Make:- Havells/Gloster/Polycab/Nicco/Mescab) for power supply to MCC Panel
Installation and commissioning of above mentioned MCC Panel by making required size masonary cable trench and necessary foundation with supplying required nos compression gland, socket, cable lug, MS chequers sheet, channel ,angle earthing 50mm x 6mm GI stripe for earthing connection etc. by expert electrician and electrical supervisor to complete the job upto satisfaction of EIC. Including all electrical connections to MCC panel with all pumps, actuator motors ,all electrical accessories and from WBSEDCL meter. (MCC panel foundation should be make after taking foundation drawing approval from department.) Double earthing should be provided in all equipments (including MCC Panel and All pumps motors) connected with 400± 10% volt and single earthling should be provided in rest of all equipments (including De-watering pumps motors). (Any item or accessories not considered in the specification but required to complete the entire installation and operation shall have to be supplied and installed. No extra charge shall be provided for this purpose).
Earthing with 50mm dia G.I pipe 3.64mm thick 3.04mtr long and 1 x 4 swg. G.I with (4mtrs long)13mm dia x 80mm long GI bolts, double nuts,double washers including supplying and fixing 15mm dia G.I pipe protection (1mtr long)to be fitted with bitumen and salt partly under the ground level and partly above the ground level driven to an average depth of 3.65mtr below the ground level and restoring the surface duly rammed.As per direction of EIC.double earthing to be done for each pole. By ISI- Medium GI Pipe
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required
Add GST @ 18%
Add CESS @ 1%
ORIENTAL ENGINEERING CO.
MACHINE SUPPLIERS SYNDICATE PVT LTD
EASTERN INDIA SALES AND SERVICE
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .