REPAIR/MAINTENANCE TO INTERNAL WIRING AND RENEWAL OF LED TUBE LIGHT FITTING WITH SUB MAIN and DBs AND CERTAIN WATER SUPPLY AND ALLIED WORK AT SEC 28/29 UNDER GE CHANDIGARH.

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including ,fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed.

Taking down existing unserviceable MCB DB/TPN along with MCBs complete by disconnecting all as directed.

Taking down old unserviceable light fittings any type and removal from site and making good disturbed surfaces of walls, ceiling etc complete all as specified and directed by Engineer-in-Charge to match with existing surface all as directed.

Receiving complaints Daily basis from JE incharge/site incharge lodged by the user/occupants of Internal electric/summer appliance, street light / concern external electric supply nature, rectification of the fault as per the detailed by JE incharge/ AGE E/M to rectify the fault with regard to complaint lodged and refixing of fitting and fixture to their original position as dismentled complete all as directed at site to the entire satisfaction of Engineer -in- Charge. Note : (i) Any copmplaint which is left out/unattendent 1-2 days by the electrician by any reasons the same to be communicated to the JE incharge /AGE E/M with reason. (ii) Rates quoted shall be deemed to include the cost of minor spares not catered for in the subject CA (such as bracket,clamp,nut bolt,Lugs,thimbles,cable clamp ,welding work with connecting acessories etc) (ii) New material/stores provided for completing the job shall be measured and paid for separetely under relevent items of sch 'A' and supply issue resolve such as cable loose/disconect connection, No supply issue, short circuit, any other supply issues complain resolve cost shall be deemed including this rate. (iii) Contractor shall provide the all type of T&P,vehicle, ledder and saftey items such as electric proof shooes and hand gloves, body harnese to electrician for attending & rectification the internal / external electric complaints. (iv) Contractor shall provide the complaint register and complaint slip serially numbered in duplicate as per sample. The rate of such items included in this items. (v) Any unattended complaints not done in specified time limit. The contractor shall penalty Rs. 500/- on each complaints per day.

All as per item No. 06 above but for one 3 pin 5 amp socket on same board all as directed.

All as per item No. 06 above but for One 3 pin socket outlet 5 Amps on independent board

All as per item No. 06 above but for One bell point controlled by one way bell push switches.

All as per item No. 06 above but for One light point controlled by two way 5 Amps switches

All as per item No. 11 above but for one 3 pin 5 amp socket on same board all as directed.

All as per item No. 11 above but for One 3 pin socket outlet 5 Amps on independent board

All as per item No. 11 above but for One bell point controlled by one way bell push switches.

All as per item No. 11 above but for One light point controlled by two way 5 Amps switches

M & L in repair for point wiring for One light/Fan point controlled by one switch with 1.5 sq mm single core FRLS PVC insulated cable 1100 V grade with multistranded copper conductor drawn through PVC casing and capping (ISI Marked) (Approx size 20/25/40mm width) along with all fitting/ fixtures as Tee, Bend, Elbow, socket, Saddles etc.fixed to wall /roofs ceiling etc and incl provision of 1.5 sq mm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly incl fabricated steel terminal box made out of 1.6 mm thick MS sheet concealed in the wall with 3 mm thick laminated sheet top cover / PVC Switch Board mounted on wall for mounting the switches , socket outlets , fan regulators etc all as specified and directed.

All as per item no 16 above but One socket 3 pin outlet 5 amp on independent board.

All as per item no 16 above but One 3 pin socket outlet 5 amp on the same board board with other switches.

All as per item no 16 above but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 sq mm size.

All as per item no 16 above but with copper conductor cable for one 3 pin socket outlet 15 amp independent board with cable 2.5 sq mm.

All as per above item no 21 but copper conductor 4 Sqmm (nominal area).

Supply for in repair of 2 way Switch modular type single pole one module, 6 Amps complete all as specified and directed.

Supply for in repair Switch modular type single pole one module, 6 Amps complete all as specified and directed.

Supply for in repair of Switch modular type single pole one module, 15/16 Amps complete all as specified and directed.

Supply for in repair of Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6 Amps complete all as specified and directed.

Supply for in repair of Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6/16 Amps complete all as specified and directed.

Supply for in repair of Modular bell push single pole one module, 6 Amps complete all as specified and directed.

Supply for in repair of Modular blank plate one module complete all as specified and directed.

Supply for in repair of Modular fan step regulator 120 watts for 48"/56" sweep ceiling fan 2 module complete all as specified and directed.

Supply for in repair of Ceiling rose 3 pin, 230 volts PVC polycarbonate insulated body complete all as specified and directed.

Supply for in repair of Bell ding dong AC 230 volts PVC polycarbonate insulated body complete all as specified and directed.

Supply for in repair of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply for 4 module (gang box) plastic surface box with plate complete all as specified and directed. .

Supply for 6 module (gang box) plastic surface box with plate complete all as specified and directed.

Supply for 8 module (gang box) plastic surface box with plate complete all as specified and directed.

Supply for Modular metal flush terminal boxes with cover plate and frame suitable for 1 module complete all as specified and directed.

Supply for Modular metal flush terminal boxes with cover plate and frame suitable for 2 module complete all as specified and directed.

Supply for Modular metal flush terminal boxes with cover plate and frame suitable for 3 module complete all as specified and directed.

Supply for Modular metal flush terminal boxes with cover plate and frame suitable for 4-5 module complete all as specified and directed.

Supply for Modular metal flush terminal boxes with cover plate and frame suitable for 6 module complete all as specified and directed.

Supply for Modular metal flush terminal boxes with cover plate and frame suitable for 8 module complete all as specified and directed.

S&F in repairs switch piano flush type single pole one way 5 amp complete all as specified and directed.

S&F in repairs switch socket combination 2 in 1, 3 pin 5/15 amp flush type complete all as specified and directed.

S&F in repairs switch socket combination 2 in 1, 5 amp flush type complete all as specified and directed.

S&F in repairs socket outlet 2 in 1, 3/5 pin 5 amp multi purpose, flush type complete all as specified and directed.

S&F in repairs switch bell push, flush type 5 Amp complete all as specified and directed.

S&F in repairs bell, Multi music type AC, 230 Volts single pole complete all as specified and directed.

S&F in repairs fan regulator electronic step type complete all as specified and directed.

Disconnection and removing the u/s LED lamp and S&F invertor LED lamp 15 watts complete all as specified and directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED lights fitting 1x 36W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&Fof LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F of LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair of LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engineer-in-Charge.

S&F in repair/replacement of flexiable pipe for camoflage or sequre of loose wiring with verious size as directed by Engg - in Charge

S&F MCB DB SPN 2 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface complete all as specified and directed by Engineer-in-Charge.

S&F MCB DB SPN 4 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface complete all as specified and directed by Engineer-in-Charge.

S&F MCB DB SPN 6 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface complete all as specified and directed by Engineer-in-Charge.

S&F MCB DB SPN 8 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface complete all as specified and directed by Engineer-in-Charge.

S&FMCB DB SPN 12 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface complete all as specified and directed by Engineer-in-Charge.

S&F in repair/replacement of MCB SPN 40 to 63 AMP, 240 Volts 10KA 'C' curve , Complete all as specified and directed.

S&F in repair/replacement of MCB SP 5 to 32 ,single pole 240 Volts 10KA 'C' curve, Complete all as specified and directed.

S&F in repair/replacement of MCB 415V 10KA 'C' Curve TPN 16 To 32 AMP , complete all as specified and directed.

S&F in repair/replacement of MCB 415V 10KA 'C' Curve TPN 40 To 100 AMP , complete all as specified and directed.

S&F in repair/replacement of S&F Single pole and neutral Enclosure with a two pin earth plug and socket complete controlled by one single pole MCB 20 Amps 240 Volts, complete all as specified and as directed.

Material and labour for repair of LT Panel/MCCB DB/MCB DB/Bus Bar Chamber making electric connections incl wiring by Conductor multistranded PVC insulated welding of doors , fixing hinges, Thimble Refixing of MCCBs and brazing etc incl complet all as specified and diercted by Engineer-in-Charge.Note:Rusted/Broken/Loses all types Door for Panel/DB/Busbur are provided cost shall be deemed including this rate.

Sub main wiring in replacement (with approved colour coding as per IS) with single core FRLS PVC insulated multistranded copper conductor cable 1.1 KV grade (main cable 2.5 sqmm two runs of main cable) alongwith one run of single core 2.5 sqmm FRLS PVC insulated flexible stranded copper Conductor 1.1 KV grade of earth for earthing drawn in suitable PVC conduit/ concealed conduits/casing caping as per site required including Cutting chases in existing wall for laying of PVC conduits including making good disturbed surfaces with painting of wall matching with exisiting colour after concealing the conduit in wall with size 2 run of 2.5 Sqmm cable + 1 run of 2.5 Sqmm all as specified. Note :- Two runs of main copper conductor, one run of copper conductor for earth continuity and one run of conduit shall be measured as one unit length

All as per above item no. 68 but 2 run of 4 Sqmm cable + 1 run of 4 Sqmm

All as per above item no. 68 but 2 run of 6 Sqmm cable + 1 run of 6 Sqmm

All as per above item no. 68 but 2 run of 10 Sqmm cable + 1 run of 10 Sqmm

S&F PVC insulated and FR PVC Round Sheathed 2core 1.5sqmm, Copper Conductor(flexible) industrial cable, 1100 Volt, conforming to IS 694 for sub main wiring drawing through PVC casing and capping/ saddling by saddle/under PVC condute complete all as specified and directed by Engineer-in-Charge.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed standard aluminiu conductor 2 core 6 sqmm in service connections suspen- ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular.saddling by saddle/under PVC condute complete all as specified and directed by Engineer-in-Charge.

All as per Item No 73 here in above but of aluminium conductor 2 core 4 sqmm.

M&L Making of square / circular hole in the stone masonry/Brick/wooden/alluminium wall or window suitable for fixing exhaust fan of 150/250/320 mm sweep.including M.S Frame work of suiable size with nut,bolts etc and sealing the sides of exhaust fan complete all as directed.

S&F exhaust fan of size 300 mm sweep metal body 900RPM with metallic louvers, working on single phase 230V AC Supply complete with nut and bolts complete all as specified and directed by Engineer-in-Charge.

M&L for Earthing complete with and including galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including galvanised iron or steel earth wire, 4mm dia (No. 8 SWG) by means bolts, nuts, check nuts and washers made out of galvanised iron, 15 mm bore (light grade) GI pipe for protection of earthing lead, 20 mm bore (light grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 pit and 50 mm thick RCC M-25(Design mix) reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 3 of SSR Part-I (2009) complete all as specified and directed by Engineer-in-Charge. Note : The unit rate includes for protecton pipe 15mm and GI earth strip/steel earth wire 4mm from top of earth plate upto 7.50 metre above ground level.

Excavation in trenches in soft/loose soil not exc 1.5m wide and not exc 1.5m deep & getting out for laying of pipes complete all as specified and directed.

Returning, filling in, incl spreading, leveling, watering and well ramming in layers not exc 25cm thick layers of soft/loose soil complete and all as specified.

Removing excavated material to a distance not exc 50m to a distance & depositing where directed at a level not exc 1.5 above the starting point complete all as specified.

Supply, laying , jointing and testing steel water tubing complete with all fittings of 15mm bore medium grade ISI marked IS-1536 1989 pipe laid in trenches, on walls or in any position including taking down old rusted pipe complete all as directed.

Supply, laying , jointing and testing steel water tubing complete with all fittings of 20mm bore medium grade ISI marked IS-1536 1989 pipe laid in trenches, on walls or in any position including taking down old rusted pipe complete all as directed.

Supply, laying , jointing and testing steel water tubing complete with all fittings of 25mm bore medium grade ISI marked IS-1536 1989 pipe laid in trenches, on walls or in any position including taking down old rusted pipe complete all as directed.

M&L cutting existing GI steel water tubing for alltration or addition ( each cut measured ) for 15mm bore of dia pipe all as specified and directed.

M&L cutting existing GI steel water tubing for alltration or addition ( each cut measured ) for 20mm bore of dia pipe all as specified and directed.

M&L cutting existing GI steel water tubing for alltration or addition ( each cut measured ) for 25mm bore of dia pipe all as specified and directed.

M&L for Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150mm bore complete all as specified and as directed.

S&F Powder coated 4 mm thick mild steel box (45cmx30cmx20cm) for water meter with openable shutter,holes for GI tubing and locking arrangements including taking down of old meter box and making good the dirturbed portion with cement mortar 1:4 complete all as specified and directed.

Note: For the purpose of arriving at lumpsum amount, the amount of credit schedule i.e Sch 'A' section II (i.e Rs 88,163.00 shall be deducted from the total amount arrived.

Total of Schedule 'A' Rs.

OM HARI HAR ENGINEERS (BID ID -3507010)

GS Engineers (BID ID -3509427)

M/s APEX ENTERPRISES (BID ID -3503198)

Jai Maa Electrical Works (BID ID -3509199)

LA ENTERPRISES (BID ID -3503271)

bharat contrectors (BID ID -3503779)