Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.0 LAccepted-AOC | ₹6.0 L | L1 | Accepted-AOC L1 |
| 2 | L2₹6.0 LRejected-Finance | ₹6.0 L | L2 | Rejected-Finance Due to Higher Rate Quoted |
Tender Value
₹6.2 L
EMD Value
₹62,000
Closing Date
18 Apr 2026, 12:00 pmClosed
EXECUTIVE ENGINEER
EECD1PWDBAHRAICH
Renewal of Medwapur Link Road Km.-1(500) in Financial Year 2026-27. (Vidhan Sabha Payagpur)
2026_CEDPW_1135571_1
1329/13M/E-Tendering/2026-27 Dated - 10/04/2026
Open Tender
Civil Works - Roads
Bahraich
Please refer Tender documents.
2 documents required · 2 mandatory
₹856
₹62,000
Yes
BAHRAICH
29 May 2026
10 Apr 2026
18 Apr 2026
10 Apr 2026
18 Apr 2026
10 Apr 2026
13 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing, laying, spreading and compacting stone aggregated of 22.4-53mm gauge sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per (MORD) Technical Specification Clauses 405. | - | Cum | - | - |
| 2 | Providing and applying Tack coat with bitumen (V.G.-10) using bitumen distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 (iii) | - | Sqm | - | - |
| 3 | Providing, laying and rolling of open - graded premix carpet of 20mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per (MORD) Technical Specification Clause 508. | - | Sqm | - | - |
| 4 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type C as per (MORD) Technical Specification Clause 510 | - | Sqm | - | - |
| 5 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. | - | Cum | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.40 MB
BOQ_2120252.xls
BOQ • 0.25 MB
T1.pdf
Tender Documents • 0.95 MB
Download all tender documents and submit your bid