Restoration of rain damages to LIS Gawal Dadin in Tehsil Baijnath District Kangra HP

Providing and fixing double flanged swing type cast steel Sluice valve / Gate Valves of Kirloskar make having size of following dia Class 300 Material CSS , BS: 1868/API 6 D equal to delivery of pump and capable of with standing nominal seat pressure (Latest addition) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

100 mm dia

100 mm dia

Providing & laying PVC insulated jointless, flat water proof 3 core copper cable 6.00 mm2 of Siemens/Finolex/Grandlay/Gloster make conforming to BIS:1554 (Part I)-1988 or latest with up to date ammendments of suitable size for the pump sets offered(one cable carrying all three phases) including all other electrical equipment /accessories such as thimbles,flexible pipe, solder, nuts & bolts cable glands etc. laid in pipes or trenches under floor. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge

Providing & laying, jointing & testing of GI pipe of following dia conforming to BIS 3183-2007 steel garde L-415 to L-210 (latest with up to date amendments) having wall thickness as specified below and capable of with standing required test pressure in a rendom length of 5.5 to 6.5 mtr, including manufacturing reducers/tapers, bends of required degree, all shot pices etc as per site requirement made from parent tuble. The laying of pipe shall also including flanges joint duly welded in three layers two inner & one outer where ever required as per the direction of Engineer-in charge The pipe shall be factory galvanized (zinc coating both inside and outside) as per relevent IS standards and the damaged portion of the pipe and special (if damaged during laying jointing operation of pipe) comaplete in all respect and to the best satisfaction and direction of Engineer In charge with in all leads and lifts. Class of pipe-100 mm dia Wall Thickness-4.40 Flange-17

Providing and fixing double flanged 80X65X80 mm piping work layout to be approved by the Engineer-in-Charge for suction and delivery pipes suitable to pump(s) offered and common header as per the rising main respectively complete with all specials such as bends tees reducers/ increasers with companion flanges matching with the relevant specifications of the accessories including rubber/asbestos gasket of minimum 3mm thickness as per 15 2712-1979 and required number of nuts and volts as per IS: 1364-1983 complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge