Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.0 CrAdmitted-Finance | ₹2.0 Cr | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SM CONSTRUCTIONS L1 |
|---|---|---|---|---|
| 1.00 | Demolishing R.C.C or brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar | 50 | CUM | 3,500 ₹1,75,000 Lowest |
| 2.00 | Earthwork excavation by mechanical means (Hydraulic excavator) or manual means for foundation, substructures, plinth beam, cess pits & trenches, all kinds of foundation etc., in all types of soil like hard gravelly soil, sandy soil for the following depth from average ground level upto the required founding level, line and grades in both dry and wet conditions including shoring, strutting, bailing out of water if necessary, leveling and ramming the bottom of trenches, dressing of sides, stacking the excavated materials away from the edge of trenches, refilling the sides of foundation as required with selected excavated earth and depositing / disposing the surplus excavated earth (Disposed soil to be leveled by breaking clods, if any and neatly dressed and leveled) within the lead specified below all complete as per specifications and as directed by the Engineer-in-charge. All kinds of soil with depth upto 1.5m below average Ground level and disposing surplus excavated earth upto a lead of 50 metres. | 1,000 | CUM | 490 ₹4,90,000 Lowest |
| 3.00 | Providing and laying cast insitu controlled RMC M7.5 Plain cement concrete of specified grade at all levels and lifts mentioned below using 20mm maximum size machine crushed graded stone aggregates including weigh batching, charges for mixing & cost of admixture, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth of all exposed faces complete for all RCC structural elements including dewatering wherever necessary all as per specification and all as shown in drawings and as directed by the Engineer-in-charge for all insitu item. Note: 1. The rate of concrete shall include all labour, equipment, charges for mixing & cost of admixture. Chemical admixture confirming to IS 9103 shall be mixed in fresh concrete and prior permission from engineer-in-charge shall be obtained for dosage and compatibility 2. Test certificate of cement procured from dealer/company to be submitted for all cement related works, Design Mix certificate of RMC by the Contractor.
3. The rate shall be quoted on the basis of using minimum M7.5 grade with 200 kg of cement per cum of concrete or up to Floor finish level 4.It is important to note that IREL will not entertain any price escalation beyond the initially quoted rates under any circumstances, including factors such as market dynamics, fluctuations in raw material prices, or other relevant influences. Bidders are required to thoroughly review the Special Conditions of the Contract (SCOC) to ensure full awareness before submitting their rates. | 115 | CUM | 9,800 ₹11,27,000 Lowest |
| 4.00 | Providing and laying cast insitu controlled RMC M35 Reinforced cement concrete of specified grade Up to plinth level mentioned below using 20mm maximum size machine crushed graded stone aggregates including weigh batching, charges for mixing & cost of admixture, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth of all exposed faces complete for all RCC structural elements including dewatering wherever necessary all as per specification and all as shown in drawings and as directed by the Engineer-in-charge for all insitu item. Note: 1. The rate of concrete shall include all labour, equipment, charges for mixing & cost of admixture. Chemical admixture confirming to IS 9103 shall be mixed in fresh concrete and prior permission from engineer-in-charge shall be obtained for dosage and compatibility 2. Test certificate of cement procured from dealer/company to be submitted for all cement related works, Design Mix certificate of RMC by the Contractor.
3. The rate shall be quoted on the basis of using minimum cement per cum. of concrete mentioned below for relevant grade of concrete. M35 grade with 420 kg. of cement per cum. of concrete for up to Plinth level 4.It is important to note that IREL will not entertain any price escalation beyond the initially quoted rates under any circumstances, including factors such as market dynamics, fluctuations in raw material prices, or other relevant influences. Bidders are required to thoroughly review the Special Conditions of the Contract (SCOC) to ensure full awareness before submitting their rates. | 212 | CUM | 14,200 ₹30,10,400 Lowest |
| 5.00 | Providing and laying cast insitu controlled RMC M35 Reinforced cement concrete of specified grade at all levels and lifts mentioned below using 20mm maximum size hard granite machine crushed graded stone aggregates including weigh batching, charges for mixing & cost of admixture, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth of all exposed faces complete for all RCC structural elements including dewatering wherever necessary all as per specification and all as shown in drawings and as directed by the Engineer-in-charge for all insitu item. Note: 1. The rate of concrete shall include all labour, equipment, charges for mixing & cost of admixture. Chemical admixture confirming to IS 9103 shall be mixed in fresh concrete and prior permission from engineer-in-charge shall be obtained for dosage and compatibility. 2. Test certificate of cement procured from dealer/company to be submitted for all cement related works, Design Mix certificate of RMC by the Contractor. 3. The rate shall be quoted on the basis of using minimum cement per cum. of concrete mentioned below for relevant grade of concrete. M35 grade with 420 kg. of cement per cum. of concrete for Above Plinth level. 4.It is important to note that IREL will not entertain any price escalation beyond the initially quoted rates under any circumstances, including factors such as market dynamics, fluctuations in raw material prices, or other relevant influences. Bidders are required to thoroughly review the Special Conditions of the Contract (SCOC) to ensure full awareness before submitting their rates. | 235 | CUM | 14,200 ₹33,37,000 Lowest |
| 6.00 | Providing, straightening, decoiling wherever necessary bending, cutting, binding and fixing in position steel reinforcement TMT bars of Fe500D or more grade steel conforming to IS:1786 ‘SAIL or VIZAG or approved equivalent make’ and tying with approved annealed binding wire of 1.6mm dia in all reinforced cement concrete work at all lifts, including cost of supplying and fixing the spacer/cover blocks and binding wire complete all as per specification and as directed by Engineer-in-Charge at all lifts. Note: The rate shall be including the cost of reinforcement steel, straightening, decoiling wherever necessary bending, cutting, binding and fixing in position steel reinforcement and loading unloading charges. | 470 | Qtl | 11,200 ₹52,64,000 Lowest |
| 7.00 | Providing plastering to the external & internal surfaces of brickwork/concrete at all elevations in cement mortar 1:4, 15mm thick including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, forming grooves wherever necessary, all as per specifications. but excluding cost of cement | 1,650 | SQMT | 436 ₹7,19,400 Lowest |
| 8.00 | Supply & fabrication and erection of steel structures by welded or bolted in built up /single sections for trusses, lattice beams , purlins,ties, bracings etc. for repair/maintenance/petty works, new works with MS angles, channels, joists, plates etc. including conveyance of all materials, loading & unloading charges, all labour charges, cost of consumables, applying one coat of marine primer & Two coats Enamel paint (Two different colour) over marine promer , hire charges for tools and plants, providing temporary support for adjoining structures, dismantling and removing damaged structures etc. complete as per standard specification. ( MS items make "Visaku", "Jindal", "SAIL" , "TATA" or equivalent make with ISI mark) | 420 | Qtl | 12,500 ₹52,50,000 Lowest |
| 9.00 | Supply and fixing with AC corrugated Roofing / side cladding sheet with fixed with suitable size Zinc phosphated galvanised and polymer coated J or L bolts with washer and cap including necessary overlap of 150mm at ends including conveyance of all materials , loading & unloading charges ,all labour charges hire charges for tools and plants complete as per standard specification. (AC sheet make: Everest/ Ramco Or equivalent with ISI mark). Note :- The holes on AC sheets for fixing J or L bolts must be drilled using electric/cordless drilling machine ( ie manual punching with hammer drill not be allowed ) | 700 | SQMT | 348 ₹2,43,600 Lowest |
| 10.00 | Supplying and fixing Poly carbonate fully corrugated sheet clear / UV stalised diffuser type having minimum thickness 1.80 mm with width of 1050 mm& length of 3 .00 m to suit with fully corrugated asbestos cement roofing sheet for roof & side cladding fixed with suitable size Zinc phosphate galvanized and polymer coated J or L bolts With washer and with necessary overlap of 150mm at ends including cost & conveyance of all materials , loading & unloading charges ,all labour charges, hire charges for tools and plants, dismantling and removing existing damaged roof/ side cladding sheets, etc. complete as per standard specification. (Polycarbonate sheet make Lotus or equivalent). Note :- The holes on Poly carbonate fully corrugated sheet for fixing J or L bolts must be drilled using electric/cordless drilling machine ( ie manual punching with hammer drill not be allowed ) | 50 | SQMT | 1,850 ₹92,500 Lowest |
Tender Value
₹2.1 Cr
EMD Value
₹3.6 L
Closing Date
26 Nov 2025, 3:00 pmClosed
C.Ushanandhini
Chief Manager- Finance (Puchase)
Construction of a new Godown for stacking Ilmenite on the north side of Godown no.15 at IREL Chavara plant
2025_IREL_253225_2
IREL/CHAVARA/2025-26/T. NO.132
Open Tender
Construction Works
Item Rate
210 days
IREL(India)Limited, Chavara
As per clause 13 of the tender
2 documents required · 2 mandatory
₹0
₹3.6 L
18 Dec 2025
17 Nov 2025
27 Nov 2025
17 Nov 2025
26 Nov 2025
17 Nov 2025
Amount
Demolishing R.C.C or brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar
Providing and laying cast insitu controlled RMC M7.5 Plain cement concrete of specified grade at all levels and lifts mentioned below using 20mm maximum size machine crushed graded stone aggregates including weigh batching, charges for mixing & cost of admixture, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth of all exposed faces complete for all RCC structural elements including dewatering wherever necessary all as per specification and all as shown in drawings and as directed by the Engineer-in-charge for all insitu item. Note: 1. The rate of concrete shall include all labour, equipment, charges for mixing & cost of admixture. Chemical admixture confirming to IS 9103 shall be mixed in fresh concrete and prior permission from engineer-in-charge shall be obtained for dosage and compatibility 2. Test certificate of cement procured from dealer/company to be submitted for all cement related works, Design Mix certificate of RMC by the Contractor. 3. The rate shall be quoted on the basis of using minimum M7.5 grade with 200 kg of cement per cum of concrete or up to Floor finish level 4.It is important to note that IREL will not entertain any price escalation beyond the initially quoted rates under any circumstances, including factors such as market dynamics, fluctuations in raw material prices, or other relevant influences. Bidders are required to thoroughly review the Special Conditions of the Contract (SCOC) to ensure full awareness before submitting their rates.
Providing and laying cast insitu controlled RMC M35 Reinforced cement concrete of specified grade Up to plinth level mentioned below using 20mm maximum size machine crushed graded stone aggregates including weigh batching, charges for mixing & cost of admixture, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth of all exposed faces complete for all RCC structural elements including dewatering wherever necessary all as per specification and all as shown in drawings and as directed by the Engineer-in-charge for all insitu item. Note: 1. The rate of concrete shall include all labour, equipment, charges for mixing & cost of admixture. Chemical admixture confirming to IS 9103 shall be mixed in fresh concrete and prior permission from engineer-in-charge shall be obtained for dosage and compatibility 2. Test certificate of cement procured from dealer/company to be submitted for all cement related works, Design Mix certificate of RMC by the Contractor. 3. The rate shall be quoted on the basis of using minimum cement per cum. of concrete mentioned below for relevant grade of concrete. M35 grade with 420 kg. of cement per cum. of concrete for up to Plinth level 4.It is important to note that IREL will not entertain any price escalation beyond the initially quoted rates under any circumstances, including factors such as market dynamics, fluctuations in raw material prices, or other relevant influences. Bidders are required to thoroughly review the Special Conditions of the Contract (SCOC) to ensure full awareness before submitting their rates.
Providing and laying cast insitu controlled RMC M35 Reinforced cement concrete of specified grade at all levels and lifts mentioned below using 20mm maximum size hard granite machine crushed graded stone aggregates including weigh batching, charges for mixing & cost of admixture, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth of all exposed faces complete for all RCC structural elements including dewatering wherever necessary all as per specification and all as shown in drawings and as directed by the Engineer-in-charge for all insitu item. Note: 1. The rate of concrete shall include all labour, equipment, charges for mixing & cost of admixture. Chemical admixture confirming to IS 9103 shall be mixed in fresh concrete and prior permission from engineer-in-charge shall be obtained for dosage and compatibility. 2. Test certificate of cement procured from dealer/company to be submitted for all cement related works, Design Mix certificate of RMC by the Contractor. 3. The rate shall be quoted on the basis of using minimum cement per cum. of concrete mentioned below for relevant grade of concrete. M35 grade with 420 kg. of cement per cum. of concrete for Above Plinth level. 4.It is important to note that IREL will not entertain any price escalation beyond the initially quoted rates under any circumstances, including factors such as market dynamics, fluctuations in raw material prices, or other relevant influences. Bidders are required to thoroughly review the Special Conditions of the Contract (SCOC) to ensure full awareness before submitting their rates.
Providing, straightening, decoiling wherever necessary bending, cutting, binding and fixing in position steel reinforcement TMT bars of Fe500D or more grade steel conforming to IS:1786 ‘SAIL or VIZAG or approved equivalent make’ and tying with approved annealed binding wire of 1.6mm dia in all reinforced cement concrete work at all lifts, including cost of supplying and fixing the spacer/cover blocks and binding wire complete all as per specification and as directed by Engineer-in-Charge at all lifts. Note: The rate shall be including the cost of reinforcement steel, straightening, decoiling wherever necessary bending, cutting, binding and fixing in position steel reinforcement and loading unloading charges.
Providing plastering to the external & internal surfaces of brickwork/concrete at all elevations in cement mortar 1:4, 15mm thick including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, forming grooves wherever necessary, all as per specifications. but excluding cost of cement
Supply & fabrication and erection of steel structures by welded or bolted in built up /single sections for trusses, lattice beams , purlins,ties, bracings etc. for repair/maintenance/petty works, new works with MS angles, channels, joists, plates etc. including conveyance of all materials, loading & unloading charges, all labour charges, cost of consumables, applying one coat of marine primer & Two coats Enamel paint (Two different colour) over marine promer , hire charges for tools and plants, providing temporary support for adjoining structures, dismantling and removing damaged structures etc. complete as per standard specification. ( MS items make "Visaku", "Jindal", "SAIL" , "TATA" or equivalent make with ISI mark)
Supply and fixing with AC corrugated Roofing / side cladding sheet with fixed with suitable size Zinc phosphated galvanised and polymer coated J or L bolts with washer and cap including necessary overlap of 150mm at ends including conveyance of all materials , loading & unloading charges ,all labour charges hire charges for tools and plants complete as per standard specification. (AC sheet make: Everest/ Ramco Or equivalent with ISI mark). Note :- The holes on AC sheets for fixing J or L bolts must be drilled using electric/cordless drilling machine ( ie manual punching with hammer drill not be allowed )
Supplying and fixing Poly carbonate fully corrugated sheet clear / UV stalised diffuser type having minimum thickness 1.80 mm with width of 1050 mm& length of 3 .00 m to suit with fully corrugated asbestos cement roofing sheet for roof & side cladding fixed with suitable size Zinc phosphate galvanized and polymer coated J or L bolts With washer and with necessary overlap of 150mm at ends including cost & conveyance of all materials , loading & unloading charges ,all labour charges, hire charges for tools and plants, dismantling and removing existing damaged roof/ side cladding sheets, etc. complete as per standard specification. (Polycarbonate sheet make Lotus or equivalent). Note :- The holes on Poly carbonate fully corrugated sheet for fixing J or L bolts must be drilled using electric/cordless drilling machine ( ie manual punching with hammer drill not be allowed )
Supply and fixing AC corrugated ridge with Zinc phosphated galvanized and polymer coated J or L bolts With nuts & washer and cap at all heights and levels including, making the ends of sheets in correct lines and levels ,conveyance of materials, loading & unloading charges ,all labour charges ,hire charges for tools and plants, providing necessary scaffolding/ safety arrangement equipment for the work etc. complete as per standard specification. Note :- The holes on AC corrugated ridge for fixing J or L bolts must be drilled using electric/cordless drilling machine ( ie manual punching with hammer drill not be allowed )
Supply and fixing AC Barge boards for roof / side cladding AC barge boards with Zinc phosphated galvanised and polymer coated J or L bolts With nuts & washer and cap at all heights and levels including, making the ends of sheets in correct lines and levels ,conveyance of materials, loading & unloading charges ,all labour charges ,hire charges for tools and plants, providing necessary scaffolding/ safety arrangement equipments for the work etc. complete as per standard specification. (AC sheet make: Everest/ Ramco Or equivalent with ISI mark) Note :- The holes on AC barge board for fixing J or L bolts must be drilled using electric/cordless drilling machine ( i.e. manual punching with hammer drill not be allowed )
Supplying and fixing Turbine air wind ventilators 600mm throat dia with FRP / poly carbonite base and blase with SS or Aluminium for roof & fixed with suitable size Zinc phosphated galvanised and polymer coated J or L bolts With washer and cap including cost & conveyance of all materials , loading & unloading charges ,all labour charges hire charges for tools and plants, dismantling and removing existing roof sheets for fixing ventilators, etc complete as per standard specification. The holes on Turbine air wind ventilators for fixing J or L bolts must be drilled using electric/cordless drilling machine ( ie manual punching with hammer drill not be allowed )
Supply and stacking ISI Mark beat quality Portland cement ( OPC/PPC) approved Make including all cost and conveyance of materials, loading and unloading charges etc (Payment will be made only for actual quantity of cement consumed)
Sundry and petty works for miscellaneous works (supply of blacksmith)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Document
2.19 MB
BOQ
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .