REPAIRS TO CERTAIN BOUNDARY WALL DRAIN PLINTH PROTECTION APPROACH PATH UNDER AGE B AND R EAST AT GE DEHU ROAD

Amount

Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified

M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified

M & L Pre-cast cement concrete 1:3:6, type C1 (20 mm graded stone aggregate) as in block masonary with solid blocks, exc 10 cm in width and setting in cement mortar 1:4 complete.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or conrete surfaces finishing the surfaces even and smooth without using extra cement.

M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls.

M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemper on walls.

M&L for PCC type B1 (1:2:4, using 20mm graded stone aggregate) as in coping.

Demolition of concrete ( unreinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level)

M & L 75 mm thk Cement conc type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair .

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar.

M & L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thick as in sub base complete all as specified.

M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified.

M& L Chequared Cement Concrete Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & reflective coloured in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-1 using (20 mm graded stone aggregate) as in Sub base,complete all as specified.

M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M&L for vitrified coloured tiles 10mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete

Ditto above item No 20 but on skirting over 10 mm th rendering in CM 1:4 complete.

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 all as direced.

Dismantling Plain or corrugated steel (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for .

S&F Rolled Sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A)

M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc.

S & F 0.5mm thick corrugated pre painted / coloured galvalume sheet in roofing fixing all as per manufactures instructions with all fittings and accessories etc complete.

All as per item No.27 above above but plain sheet fix in valley gutter / ridge

M & L Hard core of broken stone or boulders, gauge n.exc. 63 mm deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L Hard core of broken stone or boulders,except material gauge n.exc. 63 mm deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base for hard standing complete all as specified and directed.

M & L for 150 mm thick Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less completed all as specified

Finishing surface of concrete roads, pavements etc by belting/brooming complete all as specified and directed.

M & L for forming 12 mm thick expansion joints 150 mm deep, filled with preformed bituminous filler and top 30 mm primed and sealed with sealing compound grade 'A' complete all as specified and directed.

M & L for forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

Providing and carrying out water Proofing treatment to toilet, sunkan slabs, wet areas ets, after proper surface prepration, carry out cementitious ingection grouting at leakage point using cebex 100 plasticised expanding grounding admixture, application of polymer modified at slab wall junction using Nitoband SBR latex screen modifier cum bonding agent and application of two coat of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc, complete including 15mm thick cement plaster in CM 1:4 all tools and plant as per manufacturers specification paint complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-1 using (20 mm graded stone aggregate) as in floor,finished rough to receive tiles etc,complete all as specified.

Dismanteling post, struts , (wood , steel or Rcc) any section incl. taking out embede portion in concrete or brickwork and making disturbed portion good

M&L for Cement concrete type C2 1:3:6 (using 40mm graded aggregates) as in retaining walls, any thinkess, size or shape including pilasters, buttresses columns, pillers, boundary and post (including caps and bases)

S&L Mild steel work post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165

S&F in Repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M &L for two coat of synthetic enamel paint over a coat of red oxide primer, including preparation of steel Surfaces of any description, over 10cm in width or girth,not otherwise described

M & L for plain cement concrete (using 40 mm graded stone aggregate) as in surface channel or drain or benching in manhole complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid.

M and L for 10 mm thick Polypan PS 20010 Prelam PVC (hallow profile) sheets used for fixing on wall Lining and PVC false ceiling inclusive of necessary fixing as directed by manufacturer and engr-in-charge.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified

DR J S CHADHA AND SONS

RAMESH PATIL

H S TAKHI

KARPE AND SONS CONSTRUCTION

Samyak Engineers

Ridhi Constructions

SHAMBHO BUILDCON