Chisel Gasket Remover

Special Eligibility Criteria

1. 1

   Purchase will be made from the OEMs [i.e. Stanvac , Henkel , & Dow corning ] or their authorized dealer with Tender Specific Authorization only. Authorized dealers have to submit tender specific authorization with their offer, otherwise their offer will be summarily rejected.

   Document requiredConfirmation required
2. 2

   A) In Keeping with the Public Procurement (Preference to Make in India) Order, 2017, as amended, it has been found that there is sufficient local capacity and competition in supply of the tendered item of required quality and therefore public procurement of the item is restricted to Class I local suppliers only and the vendors who do not qualify to be Class I local suppliers should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class I local supplier for the tendered item participates in the tender it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor. B) Provisions of latest Rly Bd letter regarding Public Procurement (Preference to Make in India), Order 2017 - Revision vide Lr. No. 2020/RS(G)/779/2/Pt.1(E3322671) dt 20.08.2024 are applicable.

   Confirmation required

Commercial-Compliance

1. 1

   [a] All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per the GST Law. Firms must indicate its GST registration number along with their offer. [b] In case the successful tenderer is not liable to be registered under CGST/IGST /UTGST/SGST Act, The Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism (RCM) and deposit the same to the concerned tax authority. [c] The firm should indicate the tariff code (HSN Code) for claiming GST for the tendered item. [d] The offer shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number.[e] It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. The Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate, if quoted by the bidder. [f] Wherever, the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the Purchase order or billed. [g] Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher taxbill as per invoice to match the All inclusive Price as mentioned in the Purchase order. [h] Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC

   Document optionalConfirmation required
2. 2

   In case of road delivery, the date of delivery at destination [consignee's end] shall only be treated delivery date irrespective of FOR /FOT condition mentioned elsewhere in the contract/tender.

   Confirmation required
3. 3

   Firm agrees to pass on such additional set off / input tax credit as may become available in future under the GST provisions in respect of all the inputs used in the manufacture of the tendered item on the date of supply, by way of reduction in price and advise the purchaser accordingly.

   Document optionalConfirmation required
4. 4

   The bidders should quote the applicable HSN codes and it is the responsibility of the tenderer to quote the correct HSN code and upload the document.

   Document optionalConfirmation required
5. 5

   PPP-MSE benefits are not applicable to authorized dealers or traders.

   Document optional
6. 6

   Offer should be kept valid for 90 days.
7. 7

   Firm willing to avail benefits of Micro and Small Enterprises, must submit documentary evidence of being Micro or Small Enterprises for tendered item in the certificate issued by nodal agencies as per Public Procurement Policy (i.e., UDYAM REGISTRATION CERTIFICATE), failing which firms offers will be treated as Non-MSE firm. For detailed instructions refer Para 15 of General Tender Conditions attached with NIT and/or available as Public Document on IREPS website Goods and Services/SCR. Failing which such benefit will not be extended to them.

   Confirmation required
8. 8

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

Other Conditions

1. 1

   Inspection by a nominated Third Party Inspection (TPI) agency at the manufacturer premises and direct dispatch from the premises of the manufacturer after the material has been inspected and passed by the nominated Third Party Inspection (TPI) agency. Firm to upload/mention full address and place of inspection. Any request from the firm to change TPI agency from one to another post- contract will not be entertained.
2. 2

   The bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the IRS Conditions of Contract and [or] special Conditions and [or] other Conditions specified/attached with the tender. [Denial of this condition not Recommended].

   Confirmation required
3. 3

   For multi consignee item, the rate should be quoted by Firm on FOR destination basis for each consignee separately. The inter-se ranking of offers will be decided for each consignee separate.
4. 4

   DSL/KZJ-38 Nos is clubbed with DSL/GY-790 Nos Total 828 Nos.

1. 1

   Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted. Validity will be reckoned from the closing date of tender.

2. 2

   Firms are expected to quote for a quantity not less than 50% of the tendered quantity. Offers received for quantity less than 50% of tendered quantity will be considered unresponsive and will be summarily rejected.