Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹80,230
Closing Date
9 Nov 2026, 2:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
90 days
Expenditure
General
IE
3 conditions · 3 needing a document upload
Bulk order will be placed on the manufacturer or its authorized agent having proven performance for tendered item or CBCB-IV complied DG set as per attached GCC para 2.6. Bidders are advised to read Para No. 2.6 of GCC attached carefully before bidding,for full details.
Tenderer other than manufacturer must attach/upload tender specific authorization certificate issued by original manufacturer along with their offer failing of which offer of the firm will not be considered as a valid offer and such offer will be summarily rejected without any back reference.
The onus of submission of requisite documents in support of supply and acceptance of material by consignee lies with the tenderer. Further it is to be noted that PO copies/GeM contract copy without CRN/RNOTE/CRAC copy or acceptance certificate duly signed by accepting authority will not be considered as performance document.
28 conditions
[i] Have you attached the past performance credentials with your offer. [ii] Have you mentioned the complete address of the work premises of the OEM where Third Party Inspection (TPI) inspection will be carried out before dispatch of the material.
Bidders should confirm following certificate for Compliance (a) I have read the clause Sr. No. 32 of Instructions to tenderers and general conditions of tenders for supply contract attached with the tender regarding restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries. (b) I certify that this bidder is not from such a country and will not sub contract any work to a contractor from such countries unless such contractor is registered with the Competent Authority. I also certify that this bidder will not offer any products/services of entity from such countries unless such entity is registered with the Competent Authority. (c) I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. (d) I hereby acknowledge that in the event of acceptance of my bid on above certificate and if the certificate is found to be false at any stage, the false certificate would be a ground for immediate termination of contract and further legal action in accordance with the Law. (Bidders confirming this certificate for Compliance shall select Yes in the Complied column. However, in case you don t confirm above certificate for Compliance, select NO in the complied column. In such cases you are required to submit the certificate for Compliance as per Part B of Annexure8 Instructions to tenderers and general conditions of tenders for supply contract along-with their Bid/Offer.
FOR: Destination.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 location across West Bengal · 10 Numbers total
Retrofit Emission Control Device
IE265894~SER
IE265894
Open - Indigenous
Goods
West Bengal
₹0
₹80,230
9 Oct 2026
9 Oct 2026
2 items · 10 Numbers total
Designing, manufacturing, supply at site, erection, installation, commissioning and testing of Retrofit Emission Control Device (RECD) for 250 KVA Diesel Generator Sets (details of DG Set with location attached in Annexure - A) strictly complying the latest guidelines of CPCB - IV with latest amendment (if an y). RECD Material should be Stainless Steel and mode of operation should be automatic. Cost includes all th e materials, spears and accessories required for erection of structure, installation and commissioning includ ing minor civil and masonary works, wiring / electrical connection to complete the entire works. [ Warrant y Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/EL/DEV/ADA, SER | West Bengal | 7.00 Numbers |
| Total | 7 Numbers | |
Designing, manufacturing, supply at site, erection, installation, commissioning and testing of Retrofit Emission Control Device (RECD) for 160 KVA Diesel Generator Sets (details of DG Set with location attached in Annexure - A) strictly complying the latest guidelines of CPCB - IV with latest amendment (if an y). RECD Material should be Stainless Steel and mode of operation should be automatic. Cost includes all th e materials, spares and accessories required for erection of structure, installation and commissioning includ ing minor civil and masonary works, wiring / electrical connection to complete the entire works. [ Warrant y Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/EL/DEV/ADA, SER | West Bengal | 3.00 Numbers |
| Total | 3 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5879798.pdf
ATTACHMENT
5932278.pdf
ATTACHMENT
5932274.pdf
ATTACHMENT
5781857.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .