PROVN OF WIRE MESH, GRILL AND SLIDING WINDOW AND CATTLE FENCING AT VARIOUS LOCATION AT MIL STN GANDHINAGAR

Amount

M&L M S steel gate, of angle or other section with gusset plates ,rails comforming to Fe-41--W (Gde-E-250) including for hanging or sliding with and including either hooks and hinges with locking arrangements, (2.30m wide and 2.00 High) etc completed all as specified and as directed.

Excavation in trenches n exc 1.5m wide and n,exc 1.5 m in depth for foundation,etc or shafts, wells, cessipts,manholes,pier holes,etc n exc 10 sq m inplan and getting out in soft/loose soil completed all as specified and as directed.

Excacation of post holes (or simllar holes) each n,exc 0.5cum,and getting out insoft/loose soil retuting and filling in and ramming earth of brokrn rubble mixes with earch around in layers completed all as specified and as directed.

Removing excvaated soil nexc 50m and depositing where directed at a level n exc 1.5 m above the stating point soil etc completed all as specified and as directed.

M&L PCC (1:4:8) C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete as in foundation filling and mass concrete all as completed as directed.

M&L Pre cast reinforced cement concrete (1:2:4) type B-1 (uing 20mm graded stone aggregate) in precast posts, fencing posts,straining or terminal posts, struts etc for fencing average sectional area exc 100 and n exc 250 sq cm, with or wittout chamferd angles and flat, splayed, rounded or mitred tops as directed and fixed.etc completd all as specified and directed.

M&L Mild steel tmt bars10mm dia and over, cut to length, bend to shape required, including crancking, bending for hooplig for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc completed all as specified and as directed.

M&L 5 mm and over upto and including 10mm dia in stirripus, spacers and binders cut to length,bend to shape required including crancking,bending spirally for hooping for columns, hoocking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc completed all as specified and as directed.

M&L Galvanished, 2 strand,steel barbed wire 2.24mm dia barbed with 2mm barvs dia barbs at 75mm spacinges and straining and fixing to any type of standard rails strin-ing bolts including secuting or tying at crossinges with and provision of galvanished mild steel wire stapples or steel pins,etc complected all as directd and as specified (Note : Each raw of wire to be measurede)

Taking down mild steel window/ventilator of any description complete all as specified and directed.

S&F, powder coated Aluminium windows/ ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- sheet glass, wire cloth, shall be measured and paid seperately.

S&F, 4 mm thick, black tinted glass panes fixed to aluminium windows/vents with necessary rubber gaskets complete all as specified and directed.

S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering cement plaster 10mm thick in cement mortar (1:6) on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L preparing new plastered wall surfaces and applying two coats of oil bound distemper over a chalk whitening based putty complete all as specified and directed.

M&L Preperation of new steel surfaces over 10cm or girth and applying two coats of synthetic enemalled paint over a coat of red oxide zing chrome primer etc complete all as specified and as directed.