Furniture for Mechanical department

COMPUTER TABLE Anjili/ Malaysian Teak wood/Rub wood, 36'' L x 21'' W x 30'' H or more size, 18mm thick material. Sliding key board with channel (24'' x 18'' or nearest), a drawer and a place for CPU with auto hinge cover. Table base should have Castor wheels for smooth movement of system.

COMPUTER CHAIR 12-15mm hot pressed plywood are upholstered with contoured lumbar support for extra comfort for seat and back. Moulded polyurethane foam, quality fabric covering Back and height adjustment. . 38'' or more total height, Minimum 18'' and adjustable upto 23'' seat height, 18'' x 18'' or more back rest size, 20'' x 20'' or more seat size. With quality seat, back (cushioned) and arm rest. The seat and back shall be made of PU foam of density 45 ± 2 Kg/m3 upholstered with changeable fabric upholstery covers. The armrest shall be gas-assisted injection molded from black polypropylene.

STEEL ALMIRAH 6'x3'x18" with 5 rack and one rack as locker using 18g CRCA steel sheet, high quality powder coating. The doors have one handle and lever locking mechanism with 6- Six lever Mazak Zinc Plated Lock. CRCA steel sheet used in furniture shall be as per IS-513 1994 or latest standard. Baked epoxy polyester powder coating with 50-60 micron dry film thickness. Adhesion as per DIN 53152 Standards

STEEL OPEN RACK 6'x3'x1' with 6 racks (including top) using 18 g CRCA steel sheet (as per IS-513 1994 or latest standard) Baked epoxy polyester powder coating with 50-60 micron dry film thickness. Powder coating adhesion as per DIN 53152 Standards.

OFFICE TABLE Table with steel frame and wooden top of size 4'x2' with single side draw. 16g quality MS ERW square pipe (1.5”) for frame. The top should be made of 18 mm thick Pre-laminated board with 2 mm thick quality beading matching lipping. Stiffener under structure should be (1.6mm thick) C shaped CRCA steel sheet is to be provided under the top to give additional strength. Leg should be plastic buffer supports fitted with screw. All the MS structure and draws are to be power coating with dry film thickness more than 50 microns. Powder coating adhesion as per DIN 53152 Standards.

LAB WORK TABLE Plain Table with steel frame and wooden top of size 6'x3' without draw. 16g quality MS ERW square pipe (1.5”) for frame. The top should be made of 18 mm thick Pre-laminated board with 2 mm thick quality beading matching lipping. Stiffener under structure should be (1.6mm thick) C shaped CRCA steel sheet is to be provided under the top to give additional strength. Leg should be plastic buffer supports fitted with screw. All the MS structure and draws are to be power coating with dry film thickness more than 50 microns. Powder coating adhesion as per DIN 53152 Standards.

OFFICE CHAIR WITH HANDREST Chair with steel frame, seat and back - wooden border with plastic mesh (‘S’- type), Chair dimension: Width: 58.0 cm• Depth: 57.0 cm• Height: 88.0 cm• Seat Height: 45.0 cm• Steel frame: 25mm dia, 16 SWG• Seat and back:• Teak/anjili frame with wire netted• Hand rest: Teak/anjili wood

EXECUTIVE TABLE FOR HOD 6'x4' with two side drawers and cupboards on two sides. 16g quality square pipe (1.5”) for frame and 18g for cupboards. The top should be made of 20 mm thick Pre-laminated board with 2 mm thick quality beading matching lipping. Stiffener under structure should be (1.6mm thick) C shaped CRCA steel sheet is to be provided under the top to give additional strength. Leg should be plastic buffer supports fitted with screw. All the MS structure and draws are to be power coating with dry film thickness more than 50 microns. Powder coating adhesion as per DIN 53152 Standards.

LECTURE STAND: - Anjili / Teak. 120cm x60cmx40cm. With book stand 30cm below the top portion. Presenter side height – 105 cm.

WHITE BOARD:- 6’x4’ rectangular shape white board with smooth surface For Writing with dry wipe markers, Triple coated steel surface with a top coat of acrylic resin over a galvanized steel base. Plated metal corner brackets for fixing on the wall .good quality double side covered anodized Aluminum section framing, fixing screw and anchor plugs of sufficient numbers and size are to be Supplied.

Decor Modular System Pvt Ltd