SPECIAL REPAIR TO BLDG NO NP-07 AND OTHER SANCTIONED WORK AT PALAMPUR MIL STATION

Amount

PHASE -I SCHEDULE 'A' PART-I ( MISC B/R works):- M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L foe preparation of newly plastered wall surface and applying two coat oil bound distemper on newly plastered surfaces, complete all as specified and directed.

S&F for aluminium anodised powder coated chowkhats frames/Sections for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F 5.5mm thick ordinary quality sheet glass fixed to aluminium frame of partition etc fixed with rubber gasket & aluminium powder coated snap beading etc, complete all as specified and directed.

S&F Powder coated Anodised aluminium door shutters (minmium thickness of powder coating 50 micron), aluminium section of bottom rail 114.50x44.45mm, middle and top rail 85x44.45mm, style 85x44.45 mm and thickness of section not less than 1.80mm , weight of glazing clip not less than 0.124 Kg/m including necessary joining cleats, glazing clips, rubber neoprane packing two number of aluminium handle 150mm long for each shutter, one aluminium door stopper, hinges type B-21,100mm long,anodised aluminium snap beading,screws,anodised aluminium fittings complete all as specified and directed.

S&F brass 4 Levers Mortice lock, vertical type size 100 mm, complete all as specified and directed.

M&L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

S&F for 6mm thick E-board (Classic) false ceiling of size 610x610 mm fixed with aluminium snap grid frame work of same size as aluminium tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick aluminium tee as cross runner and aluminium angle of size 25x25x1.25 mm at the perimeter, including GI adjustable suspender of required length, including dismantling of old ceiling, complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm getting out in any type of soil, complete all as specified and directed

Plain cement concrete, M- 10 (Nominal Mix), type C-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete, complete all as specified and directed .

Cutting holes in brick walls exc. half brick but not exc. one brick built in cement mortar or in cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 orcement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.

Supply and fixing mild steel hand rails, half round or other stock section and countersunk for balusters, running bars for balusters, nosing to steps including embeding in concrete and screwing etc and similar work conforming to Fe-290 Gde E-165 , complete all as specified and directed.

75mm PCC 1:3:6 (Nominal Mix) type C-2 (using 40mm graded crushed stone aggregates) as in sub base of flooring finished even and fair without using extra cement, complete all as specified and directed .

M&L out door heavy duty full body vitrified tiles of any shade (as approved by GE) 600x600x15mm fixed with spacers over 6mm thick high polymer modified grey cement based tiles adhesive and grouted epoxy grout over and including 15mm screed in cement mortar 1:4, complete all as specified and directed.

Removal of excavated material to be distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified and directed.

M&L for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, iveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F mild steel barrel tower bolts 75mm in length, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F mild steel pressed handles of size 100mm, oval type, stove enamelled black complete all as specified and directed.

Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

PHASE -II SCHEDULE 'A' PART-II ( MISC B/R works):- Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) & n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n exc n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n exc n.exc 4 Sqm and refixing in the same opening each complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) & n.exc 1.5 Sqm and refixing in the same opening each complete all as specified and directed.

Taking down cement plaster on brick work or stone walls, etc including wall tiles, raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L Cement concrete type B2 1:4:8 (Using 40 mm graded aggregate) in foundation, filling and mass concrete, complete all as specified and directed.

Demolition of stone/boulders or brick masonary built in cement mortar incl all quoins, arches, pillars, etc but excl ashler facing , dresses, stone work and precast concrete articles etc, complete all as specified and directed.

M&L for wallling of random rubble, uncoursed, well bonded,bedded and solidly hearted built in cement mortar 1:4 complete all as specified and directed.

All as per the description of Serial item No 32 above but except Stones.

M&L for hard core of gauge n exc 63 mm ,deposited ,spread and levelled in layers n exc 15 cm thick ,watered and rammed to a true surface complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate laid in alternative bays area not exc. 2 sq.m. each as in plinth protection laid to slope of 1 in 12 including finishing the surface even & fair & filling the joints (6 mm wide) with mastic filling i.e. one part of bitumen 85/25 or VG-30 and 3 parts of sand by weight complete all as specified & directed.

M&L for 25 mm thick PCC 1:2:4, type B-O (using 12.5 mm graded crused stone aggregate) as in floors finished rough to receive floor finishes, complete all as specified and directed.

Demolition of cement concrete (Reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for vitrified light shade ceramic tiles 10mm thick (square or rectangular) area of each tile n.exc 0.36 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, with and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for vitrified light shade ceramic tiles 10mm thick (square or rectangular) area of each tile n.exc 0.36 Sqm, as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, with and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300mm x 200mm x 7mm/350mm x 250mm x 7mm thick as in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match over and includind 10 mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge thickness including Nanital or similar pattern roof covering complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces to brick work or stone masonry surface in CM 1:6 finished the surface even and smooth (without using extra cement on internal wall surface, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces to brick work or stone masonry surface in CM 1:4 finished the surface even and smooth (without using extra cement on internal wall surface, complete all as specified and directed.

M&L for peparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper, white or tinted, over wall putty complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished and moulding of outer edges) in steps, jambs and pillars, window cills, cooking platforms and the like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L Reinforced Cement concrete type B0 1:2:4 for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated anodised aluminium window and ventilator shutters (minmium thickness of powder coating 50 micron), weight of aluminium section not less than 0.914 kg/m for style and rail, weight of glazing clip not less than 0.124 Kg/m including necessary joining cleats, glazing clips, rubber neoprane packing,anodised aluminium snap beading,screws,anodised aluminium fittings such as peg stays one number,hinges type B-21, 100 mm long two numbers,suitable handle one number on each shutter complete all as specified and directed.

S & F for 5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs aluminium door coser hydraulically regulated, designation No. 3 universal type suitable for door shutter of 851 to 1000 mm in width complete all as specified and directed.

S&F butt hinges, 125mm size, heavy weight, cold rolled mild steel, and fixed in any position with welding with MS frame complete all as specified and directed.

S&F for 150mm size handles extruded aluminium alloy handles, fabricated type anodised, complete all as specified and directed.

S&F for 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for 100mm size aluminium anodised, barrel tower bolts, of extruded section and fixed complete all as specified and directed.

S&F in repairs brass 4 Levers Mortice lock, vertical type size 100 mm, complete all as specified and directed.

S&F for 35 mm thick 2nd class hardwood factory made plain framed panelled shutters (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F for 6 mm thick E-board (Classic) false ceiling of size 610x610 mm fixed with aluminium snap grid frame work of same size as aluminium tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick aluminium tee as cross runner and aluminium angle of size 25x25x1.25 mm at the perimeter, including GI adjustable suspender of required length, including dismantling of old ceiling, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Taking up or down old 15 mm bore steel tubing fixed to wall and ceiling or laid in floor,with all fittings and fixtures and short lengths including cleaning for refixing, removal to store, complete all as specified and directed.

Taking up or down old 20mm bore steel tubing fixed to wall and ceiling or laid in floor,with all fittings and fixtures and short lengths including cleaning for refixing or removal to store, complete all as specified and directed.

S&F for steel tubes, 15 mm bore, galvanised, " medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed.

All as per the description of Serial item No. 67 above but except GI tubing.

S&F for steel tubes, 20 mm bore, galvanised, " medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specifed

All as per the description of Serial item No. 69 above but except GI tubing.

Taking down water tank exc 500 litrs & n exc 1000 ltrs capacity & removing to store, complete all as specified.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161:1979 grade St.-240 complete all as specified and directed.

Mild steel bolts purpose made with hexagonal/Circular or square head one end and screwed the other, or screwed both ends; having dia of neck exc 12mm but n exc 20mm each screwed end to be fitted with washers and one hexagonal/Circular or square nut. exc 30cm long complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and waste cuupling including bedding in cement mortar to dwarf wall or providing cantilever brackets, PVC waste pipe and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm, complete all as specified and directed.

S&F in repairs Viterous china, wash hand basin, (white) of size 550 mm x 400 mm including brass CP waste coupling 32 mm dia with long screwed shank and fly nuts, PVC, medium grade 32 mm dia waste pipe, chain and plug, porcelain stopper, PVC connection 15 mm dia, 450 mm long with brass CP nuts and washers at both ends, complete all as specified and directed.

S&F PVC waste water pipe 32mm or 40mm dia 750mm long for WHB/Sink complete all as specified and directed..

S&F in repairs for pillar tap for 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwd down high pressure, with or withou lettered 'hot' or 'cold' with long screwed shanks and fly-nuts, screwed for iron pipes complete all as specified and directed.

S&F in repairs for bib cock/Tap CP for 15mm bore fancy type, cast copper alloy, screwed down, screwed for iron pipe or brass ferrule and fixed in repairs

S&F in repairs for CP Stop cock / angle volve 15 mm cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions, 15mm bore fancy type and fixed in repairs complete all as specified and directed.

S&F for PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed.

M&L for Prepartion of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M&L for Compound girders and stanchons, lattice girders, aerial masts,staging for water tanks and the like including caps, bases,splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars,stiffeners, gusset plates, etc. complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

S&F waste coupling 32mm or 40mm CP for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S& F for Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F in repairs drapery rails, mild steel, chromium plated 20mm dia (appx.) with fixing brackets, stops, rollers etc. complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 20 mm thick screed bed in cement mortar 1:4 to receive tiles, complete all as specified and directed.

M&L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10 mm thick in cement mortar 1:3 to receive tiles, complete all as specified and directed.

S&F in repairs soap dish any type fixed to plugs with chromium plated brass screw, complete all as specified and directed.

S&F in repairs towel rail 450 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170 gms), complete all as specified and directed.

Preperation of newly steel surfaces and applying two coats of synthetic enamel over a coat of red oxide primer complete all as specified and directed.

S&F for 10mm thick toughened glass incl Wall fittings and Fixtures required for Opening incl Doors of Size 2 x 1.00 x 2m complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors frames; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F in repairs 15mm bore dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Formwork to edges of concrete flat, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and direcred.

Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, and similar articles complete all as specified and direcred.

Plain cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in plain cement concrete M-10 (Nominal mix) type C-2 (using 40mm graded crushed stone aggregates) for 150mm bore pipe, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point where directed complete all as specified and directed.

M&L in repairs PVC (SWR) 75mm bore, floor trap with grating including jointing with solvent cement, complete all as specified.

M&L in repairs PVC (SWR) bends of 75mm bore pipe, complete all as specified.

M&L in repairs for PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tenches or in floors as in repair, 75mm bore, complete all as specified.

M&L in repairs PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to wall, ceiling, floors etc, 110mm bore of pipe, complete all as specified.

M&L in repairs PVC (SWR) bends of any radius for 110mm bore pipe complete all as specified and directed.

M&L in repairs cast iron 110mm bore, Nahani trap with grating including jointing with solvent cement, complete all as specified.

Preparation of old/new wall surfaces by removing existing treatment by scrapping, brushing etc including making surface clean, dry and free from any loose paint film, dirt, chalk, grease, fungus and algae and filling holes, dents, cracks with mixture of white cement and for applying two coats of acrylic antifungal emulsion exterior weather proof paint on external surfaces, complete all as specified and directed.

S&F 30mm size (Width of flaps when open) continuous paino hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed.

18/19mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cup board shutter/shelves and the like, complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed.

S&F magnetic catches for cabinets of size 50mm complete ith striking plate & magnetic studs complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section in any position framed or unframed work etc, complete all as specified and directed.

S&F second class soft wood as in timber scantling and similar work, clean sawn (framed/unframed) timber fixed in position, complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm getting out in any type of soil, complete all as specified and directed

Plain cement concrete, 1:5:10 (Nominal Mix), type E-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete, complete all as specified and directed .

M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.

M&L, mild steel bars 5 mm dia and over upto and including 10 mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to TMT bars, complete all as specified and directed.

Cutting openings, through brick walls built in cement mortar or cement lime mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed.

Sand filling under floors or in foundation including watering and consolidation for laying interlocking tiles complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed .

Soild panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing shown in SSR Part- II, complete all as specified and directed.

S&F 100 mm long, cold rolled mild steel Butt hinges, medium weight, complete all as specified and directed.

S&F 150mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) white connection to trap 'P' or 'S' and flush pipe etc seat cover and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing all as specified and as directed.

S&F 10 ltrs capacity PVC symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete all as specified and directed.

M&L PVC (SWR) 75mm bore, floor trap with grating including jointing with solvent cement, complete all as specified and directed.

M&L for PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tenches or in floors, 75mm bore, complete all as specified and directed.

S&F salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' of size 150mmx 150mm complete all as specified and directed.

S&F 300 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 15 mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

M&L for PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tenches or in floors, 75mm bore, complete all as specified and directed.

Plain cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in plain cement concrete 1:4:8 (Nominal mix) type D-2 (using 40mm graded crushed stone aggregates) for 100mm bore pipe, complete all as specified and directed.

Precast cement concrete 1:3:6 type C-1 (20mm graded aggregate) set in CM 1:4 as in cover slab (for manholes etc) landing, chullah hoods, chajjas and similar articles with plain faces, complete all as specified & directed .

S&F 100 mm bore cast iron soil , waste and vent pipes (Spun pipes),, in any length with or without ears, with cement joints, fixed to walls, complete all as specified and directed.

Steel window side hung glazed and gauged shutters incl projecting type hinges with steel handle and steel peg stay complete with glazing bars dove tailed or welded complete all as specified and directed.

S&F 5mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes.

M&L two coats of cement base paint over a coat of chalk whiting including preparation of new surfaces complete all as specified and directed.

M&L two coats of distempering walls with distemper oil emulsion over a coat of chalk whiting on newly plastered wall surfaces including preparation of surfaces complete all as specified and directed.

Construction of soakage well 1.80m dia and 3.00m deep below (Brick construction with sub class 'B' bricks using old size bricks) inlet pipe level (depth from ground level to below the inlet pipe 45cm)complete all as specified and shown on drawings No CEPZ/C-TD/013/13 sheet No 1/5 to 5/5 dated 11.09.2013

Construction of septic tank for 10 users (Brick construction with sub class 'B' bricks using old size bricks), complete all as specified and shown on drawings No CEPZ/C-TD/013/13 sheet No 1/5 to 5/5 dated 11.09.2013

M&L for cutting out bricks, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only) built in CM 1:6 complete all as specified and directed.

SCHEDULE 'A' PART-III ( INTERNAL ELECT):- Taking down carefully unserviceable Aluminium/Copper point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custody for taking credit (credit for above item should be made as per condition seperatly) and making good disturbed surfaces of walls, floor etc complete all as specified.

Taking down unserviceable sub main wiring of any size incl batten conduit earth wire etc and making good disturbed surfaces to match the existing surface complete all as specified.

Taking down unservecable TPN DB with MCB's of any make/capacity complete all as specified.

Taking down unservecable MCB DB SPN with MCB's of any make/capcity complete all as specified.

Point wiring for one light point controlled by one way switch with cable of size 1.5sqmm copper conductor cable multi strand PVC insulated FR-LSH (unsheathed) concealed type, drawing in and including PVC conduit 25mm dia having wall thickness not less than 2mm with sunk cast iron/pressed steel terminal boxes made out of 1.2mm thick sheet including one coat of red oxide primer on internal and external surface covered with 3mm thick hylam brand IS2036 marked laminated sheet cover for mounting switches, sockets, regulators etc controlled by one, one way switch, including 1.5sqmm PVC insulated copper conductor continuous earth wire complete all as specified and directed. Note - (i) Wiring shall be done using colour code.

All as per the description of serial item No 151 above but for one fan point/Exhaust fan controlled by one, one way switch and regulator complete all as specified and directed.

All as per the description of serial item No 151 above but for 3 pin socket outlet 5 amp independent board complete all as specified and directed.

All as per the description of serial item No 151 above but for 5 pin switch socket outlet 5 Amp on same board with other switches, complete all as specified and directed.

All as per the description of serial item No 151 above but with 2.5 Sqmm PVC (FR-LSH) insulated copper conductor cable and 2.5 Sqmm PVC (FRLS) insulated copper conductor as earth wire for one 3 Pin 15 Amp socket out let on the independent board complete all as specified and directed.

M&L complete for switch piano flush type single pole one way 5 amp complete all as specified and directed.

M&L complete for socket outlet 3 pin 5 Amp flush type complete all as specified and directed.

M&L complete for switch piano flush type single pole one way 15 amp complete all as specified and directed.

M&L complete for Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed.

M&L complete for dimmer step fan speed controller regulator electronic 230 Volt complete all as specified and directed.

S&F of ceiling rose surface type 65mm x 50mm 3 terminal complete all as specified and directed

Supply and fixing LED box type tube light fitting suitable for 1x20W 4 FT complete with LED tube rod, fixed complete to wall/ceiling and PVC round/square block (02 Nos) of suitable size etc provided complete with flexible pipe of suitable size complete all as specified and directed. Make -Crompton Cat Part No DMLN1LT8-16 with tube Cat part No LT8-20-865-2 or equivalent.

S&F Pressure die cast housing with epoxy power coated dark graphite grey colour finish prismatic polycarbonate cover with individual LED lenses. with 30 W LEDs as light source complete all as specified and directed Make: Halonix Cat Part No. HLSLD-09-30-CWL-R or equivalent

S&F street light bracket made out of 32 mm dia GI light grade tubing not less than 1.5 Mtr long bend to shape including pole clamps made out of 40 x 5 iron strip and nut bolts and washers, complete all as specified.

Supply and fix recess mounting LED 2X2 fitting 36 W (2700K/6500K as per requirement) connection complete incl two core wire connection from ceiling rose to connector with flexible pipe of suitable size of all complete all as specified. Make - Halonix Cat Part No HLFPR22-02-36-CW-R-WC or equivalent.

Taking down old unserviceable light fittings/Bulkhead fittings of any type and model complete and making good the disturbed surface complete all as specified.

M&L for sub main wiring with colour coding with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of Single 4 Sq mm in conclead PVC conduit of appropreate size including one SIngle core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 2.5 sq mm as earth continuity conductor connected to commen earth and earth dully complete all as specified. Note :- Phase should be of Red/Yellow/Blue, neutral should be of black and earthing wire should be of green colour. Two run of cable for phase/neutral and one run of cable for earth will be measured and pais as one unit length.

Supply and fix distribution board iron clad TPN DB double door with IP-43 protection 415 V 3 Phase 50 HZ 4 Way complete with appropriate size of copper busbar and neutral link complete and incl cutting chasing to wall for fixiing DB and making good the disturbed wall to match with existing surface complete all as specified. Make - Indo Asian Cat Part No 811840 or equivalent

Supply and fix MCB distribution board sheet steel powder coated SPN 2 way DB 240 Volt complete all as specified.

Supply and fix MCB TPN 63 Amps 10 KA 230 volts 'C' series complete all as specified. Make - Indo Asian Cat Part No 811220 or equivalent

Supply and fix MCB SP 40 Amps 10 KA 230 volts "C" series complete all as specified.

Supply and fix MCB SPN 40 Amps 10 KA 230 volts 'C' series complete all as specified and directed.

Supply and fix MCB SP 6 to 32 Amps 10 KA 230 volts "C" series complete all as specified and directed.

Earthing with galvanized steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr deep below normal ground level, connected to 4mm dia galvanized iron wire as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel complete with 15mm dia light grade protection pipe, 20mm dia GI light grade watering pipe with funnel including char coal dust, salt, PCC 1:2:4 in pit with precast RCC M-15 cover reinforced with XPM not less then 4.00 Kg per sqm including necessary earth work in any type of soil, removal of surplus soil to a distance not exc 50m, returning filling in complete as shown in electrical plate No 3 of SSR Part-I (2009), and connected to earthing test point all as specified or indicated, including testing on completion. NOTE: The rates for earthing includes the cost of earth lead and protection pipe upto 7.50m length.

Disconnecting/Taking down ceiling fan of size 1200/1400mm sweep removing and cleaning the dust properly, painting with same colour good quality synthetic enemelled paint after preparing surface for painting oiling and greasing of bearing including refixing and making the connection and testing complete all as specified.

SCHEDULE 'A' PART-IV ( EXTERNAL WATER SUPLLY):- Excavation, in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr in depth for laying GI pipe line in hard / dense soil and getting out complete all as specified & directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick all as specified & directed.

Removal of surplus excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

S&F Steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenchs/floors/wall complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) all as specified of the 20mm size complete all as specified and directed.

Supply and fixing Gun-metal, globe or gate valves, heavy duty, with iron wheel head, screwed both ends (ISI marked) of 20mm dia complete all as specified & directed.

M&L for cutting of existing GI pipe line of size 50 mm size (02 cuts) in position for making branch connection 20mm dia for inserting of Tee complete including Tee of required size and other fitting such as sockets, nipples, unions etc complete including making threads in position for both side as per site requirement.

SCHEDULE 'A' PART-V ( EXTERNAL ELECT):- Supply & laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 mtr in depth for foundation laying of under ground cable erecting of pole stay not exc 10 sqm on plain and not exc 1.5 m depth and getting out in any type of soil complete all as specified and directed.

Returning, filling in (soil ) including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed.

Removal of excavated material (soil) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

Sand cushioning to under ground cable with a layer of sand 8 cm before laying the cable and 15cm after laying the cable (10 cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed.

Sub class ‘B’ brick old size protection cover laid dry flat transversally along the length of cable on cushioning with width equal to the length of brick complete all as specified and directed.

Material and labour for GI tubing (light grade) with all fitting laid in trenches or along pole/bldg or under road crossing and protection pipe or fixed alongwith wall/pole with necessary clamp nut bolt and washer bore of pipe 40mm complete all as specified and directed.

M/S SAI ENGINEER