Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.5 LAccepted-AOC 00 BAIKUNTHPUR SIRSA MANPUR BAIKUNTHPUR SIRSA MANPUR GOPALGANJ 841409 GOPALGANJ BIHAR 841409 | GOPALGANJ | BIHAR | 841409 | L1 | Accepted-AOC Lowest and reasonable | |
| 2 | L2₹20.3 L+₹3.1 L (17.9%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹23.4 L+₹6.2 L (36.0%)Rejected-Finance AMLA TOLA DISTT KATIHAR BIHAR 854105 | KATIHAR | BIHAR | 854105 | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹25.8 L+₹8.5 L (49.6%)Rejected-Finance MADHUBANI BAZAR PURNEA PO PARORA PS K NAGAR PURNEA BIHAR | PURNEA | PURNEA | BIHAR | 854301 | L4 | Rejected-Finance Not lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
16 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PURNEA
GE AF PURNEA, P.O - CHUNAPUR AIR FIELD, DIST- PURNEA BIHAR, PIN CODE- 854303
REPAIR TO SANITARY FITTING, TILLING AND JOINERY, ROLLING SHUTTER AND CERTAIN MISC WORK AT AT MIL STN KATIHAR UNDER GE(AF) PURNEA.
2023_MES_596826_1
8028/E8
Open Tender
Civil Works
Item Rate
180 days
KATIHAR
PLEASE REFER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GE (AF) PURNEA
₹60,000
Yes
30 Jun 2023
19 May 2023
19 Jun 2023
19 May 2023
16 Jun 2023
2 Jun 2023
Amount
Taking up or down GI Tubing 15mm bore pipe and connections, including cleaning for refixing or removal from site complete all as specified and as directed.
Taking up or down GI Tubing 25mm bore pipe and connections, including cleaning for refixing or removal from site complete all as specified and as directed.
S&F 15mm bore unplasticised PVC pipes of pressure rating 10 kgf/sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.
S&F 25mm bore unplasticised PVC pipes of pressure rating 10 kgf/sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.
Refixing of old 15 mm bore GI tubing and connections with new fittings on new or old position to walls, ceilling or in floor etc complete all as specified and as directed.
Refixing of old 25 mm bore GI tubing and connections with new fittings on new or old position to walls, ceilling or in floor etc complete all as specified and as directed.
S&F ball valves suitable for 20 mm bore dia pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic valve ball screwed for iron pipe and fixed (Minimum weight 20 mm - 210 gms) complete all as specified and as directed.
S&F in repairs 25mm dia gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe etc complete all as specified and as directed.
S&F in repairs 15 mm bore size bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and as directed.
S&F in repairs 15mm bib taps, fancy type, cast copper alloy, chromium plated long body, with crutch or butterfly handle, screwed down, screwed with wall flange for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F in repairs stop valves 15mm dia (concealed type), cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed with long shank and cup complete all as specified and as directed.
S&F in repairs 15 mm bore size stop valves of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and as directed.
S&F in repairs angle stop valves 15mm dia (concealed type), cast copper alloy, chromium plated, screwed down, high pressure, screwed both ends for iron pipe and fixed, with long shank and cup complete all as specified and as directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm long etc complete all as specified and as directed.
S&F in repair pillar tap 15 mm dia cast copper alloy, fancy tpye with capstan heads, chromium pleted screwed down, high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed, complete all as specified and as directed.
S&F in repairs cast copper alloy chromium plated flexible health faucet with 1.2 mtr long tube and clamp complete all as specified and as directed.
S&F in repairs of tubular towel rail brass chromium plated 20mm dia D type, 600mm long between flange etc complete all as specified and as directed.
S&F in repairs of 40mm bore waste coupling of PTMT (half or full threaded) (minimum weight 60gms) complete all as specified and as directed.
S&F in repairs of 32mm bore waste coupling of PTMT (half or full threaded) (minimum weight- 45gms) complete all as specified and as directed.
S&F in repairs toilet paper holder with flat recessed type cast copper alloy chromium plated complete all as specified and directed.
S&F in repairs brass chromium plated shower rose with without swivel joints, 125mm size including fixing to steel pipe or union complete all as specified and as directed.
S&F in repairs swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms) complete all as specified and as directed.
S&F in repairs Soap dish, PTMT transparent approximate size (160X160X90)mm fixed with chromium plated screw complete all as specified and as directed.
S&F in repairs kitchen stainless steel plate rack made out of 1 mm thick sheet of standard quality. The overall size shall be (900x600)mm duly fixed to wall with chromium plated brass screws complete all as specified and as directed.
S&F PVC bathroom cabinet mirror of size (600x450)mm, fixed with steel screws on walls complete all as specified and directed.
S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size (915mm x 460mm) bowl size (410mm x 330mm x 160mm) complete all as specified and as directed.
S&F 1000 litre capacity rotational moulded polyethylene water storage tank (Cylinderical vertical with close top) three layered, hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks and removing to store with and including provision of all GI inlet pipe, GI outlet pipe, GI overflow, GI drain pipe and anti mosquito cap with all fittings complete all as specified and as directed.
S&F 500 litre capacity rotational moulded polyethylene water storage tank (Cylinderical vertical with close top) three layered, hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks and removing to store with and including provision of all GI inlet pipe, GI outlet pipe, GI overflow, GI drain pipe and anti mosquito cap with all fittings complete all as specified and as directed.
S&F in repairs of PVC opening cover with hinges and locking arrangement for PVC water tank of capacity n.exc 500 Ltrs.complete all as specified and as directed.
S&F in repairs of PVC opening cover with hinges and locking arrangement for PVC water tank of capacity exc 500 ltr but n.exc 1000 Ltrs complete all as specified and as directed.
S&F in repairs vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.
S&F in repairs wash hand basin vitreous China, white, flat back of size (550x400)mm, cutting for and pinning ends of brackets and waste coupling of PTMT for glazed ware basin etc with long screwed shanks and fly nuts, full threaded flage end bedded in white cement with and including PVC waste pipe with waste coupling of PTMT (half or full threaded Minimum weight 32mm- 45gms) for required length complete all as specified and directed.
S&F in repairs vitreous china wash down water closet (Padestal pattern) white with P or S trap, with and including white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device with 32mm dia polyethylene flush pipe etc (excluding fixing bolts flushing cistern and flush pipe) complete all as specified and as directed.
S&F in repairs plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed.
S&F in repairs vitreous China Squatting pan ‘Orissa’ pattern, size (580 x 440)mm, white, with integral foot rests and with ‘P’ or ‘S” trap, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe, etc with and including provision of lime concrete bedding, including making good to existing (floor / Tiles) complete all as specified and as directed.
S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, of capacity 10 Litres, with and including brackets & flush pipe complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises complete all as specified and as directed.
M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exc. 0.06 sqm but n.exc 0.11sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including over 15mm thick screed bed for laying floor finishes in cement mortar (1:6), complete all as specified and as directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE.
M&L for glazed ceramic coloured tiles as per IS-13753, of size (450mm x 300 mm) x 7mm thick as on vertical surfaces such as wall/skirting /dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match with and including over 10mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces as backing coat, complete all as specified and as directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE.
S&F in repairs PVC (SWR) rain water 110 mm pipe single socket in any length with rubber ring joint, fixed to walls with PVC clamp and all fittings complete all as specified and as directed.
S&F in repairs PVC (SWR) rain water 75 mm pipe single socketed in any length with rubber ring joint, fixed to walls with PVC clamp and all fittings complete all as specified and as directed.
S&F in repairs PVC (SWR) floor trap 75 mm, with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repairs 100mm dia grating round with waste hole of PTMT (Min wt 40 gms), complete all as specified and as directed.
Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) area not exc. 1.5 sqm each complete all as specified and as directed.
Taking down shutter of any description area exc 1 sqm but n.exc 2 sqm each complete all as specified and as directed.
Taking down chowkhat/frame with shutter (without taking off shutter from the frame) area exc 1.5 sqm but n. exc 4sqm complete all as specified and as directed.
Taking down shutter and refixing in same opening area exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.
S&F PVC door frame of size (50mmx47mm) made out of 5mm plain colour PVC sheet reinforced with mild steel square tubes in opening as per specific drawing complete all as specified and as directed.
S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails MS frame shall be covered with heat moulded plain clolur PVC `C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stile and plain clolur PVC sheets for top rail lock rail & buttom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with slolvent cement, supplying & fixing in the frame at site as per manufacturer's instructions and specification complete all as specified and as directed.
S&F 100 mm long butt hinges, extruded aluminum alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and as directed.
S&F 150mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.
Supply and fixing steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed.
Supply and fixing steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, specfication complete all as specified and as directed.
M&L for pressed steel frames of size (125 x 60) mm for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. Cold rolled mild steel sheet shall conform to IS 513. The size, type (profile) and dimensions of the frames shall be as indicated. Tolerance in the size of frames shall not vary by more than + 2 mm. The tolerance over the profile size shall be + 1 mm. Steel frames shall be of approved make complete with and including two shop coat of red oxide zinc chrome primer (conforming to IS 13871) complete all as specified and as directed.
M&L for pressed steel frames of size (105 x 60) mm for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. Cold rolled mild steel sheet shall conform to IS 513. The size, type (profile) and dimensions of the frames shall be as indicated. Tolerance in the size of frames shall not vary by more than + 2 mm. The tolerance over the profile size shall be + 1 mm. Steel frames shall be of approved make.complete with and including two shop coat of red oxide zinc chrome primer (conforming to IS 13871) , complete all as specified and as directed.
M&L for 35mm thick factory made, 2nd class hard wood rail and style, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F factory made Glazed and skeleton shutters, 30 mm thick second class hardwood, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.
S&F 30mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed.
S&F 300 mm aluminium anodised alloy anodised sliding door bolts, ISI marked with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded or cast aluminium alloy complete all as specified and as directed.
S&F 150 mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.
S&F 150mm long (Overall length of cover plate) floor door stopper of aluminum alloy body with rubber shoe and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.
S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
S&F aluminium (extruded section body) door closer hydraulically regulated designation No-3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
S&F mild steel helical / ordinanry rat tail rod pattern door spring 300 mm including roller and roller plate complete fixed with welding (ISI Marked) complete all as specified and directed.
S&F powder coated anodised aluminium frame (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 kg/m for doors, windows, ventilators or framing for panelling with one or more rebates with and including aluminium anodised grill, joining cleat for fixing etc complete all as specified and as directed.
S&F powder coated aluminium door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, aluminium handles- 2 Nos in each door, hinges, anodised aluminum snap beading, screws etc complete all as specified and as directed.
S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching drilling out old glazing pin /spring clip and providing and fixing complete all as specified and as directed.
S&F sheet glass ordinary quality 3mm thck and glazing with oil putty and securing pins not exceeding 0.50sqm each pane complete all as specified and as directed.
S&F 4mm thick figured glass, pin headed type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.
S&F 5.5 mm thick froasted sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane, fixed to aluminium windows/ventilator complete all as specified and as directed.
S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples for wooden/ steel frame complete all as specified and as directed.
M&L for preparation of new steel and iron surfaces of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chromate primer complete all as specified and as directed.
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
S&F small fittings 2nd class hard wood such as brakcets of any type latch and hinge block shaped door and window stops and the like of 1st class hard wood including all necessary labour articles n. exc 200 cucm each complete all as specified and as directed.
M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in bed block for fixing of hold fast, filling concrete in steel frame, gaps in between glazed & flyproof steel window, cills, railing up to 60mm in height etc including necessary use and waste of form work as required complete all as specified and as directed.
S&F in repair harrison curtain rails, 20 mm dia, anodised aluminium alloy, chromium plated with and including fixing brackets, stops, rollers etc., complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and as directed.
S&F block boards 18/19 mm thick, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces complete all as specified and as directed.
S&F in repairs 12 mm thick pre-laminated particle board exterior grade pre-laminated both side with decorative choice laminated fixed with screws to timber frame work as in cup board shutters, partitions and shelves complete as specified and as directed.
S&F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete as specified and as directed.
S&F continuous (piano) hinges/channel mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm complete all as specified and as directed.
M&L for 3mm thick cover fillets of standard hard board 40mm wide and fixed with screw, complete all as specified and as directed.
Demolition of stone slab and tiles of any description or thickness in floor, aprons etc complete all as specified and as directed.
M&L for pre-cast PCC chequared tiles prepolished machine pressed chemically treated for antifungal of size (300x 300)mm x 25mm thick of approved colour and Q design set, jointed and pointed using with grey cement and pigment in floors, paving etc including the setting and jointing in neat cement paste and slurry 0.3 kg/Sqm with and including over 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as directed. Note:- Design, shade and pattern of fixing of chequered tiles shall be as directed and approved by GE.
M&L for dura tuff PCC coloured tiles of size (300x300)mm size x 10mm thick with chequered finish, laid in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles with and including over 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and as directed. Note:- Design, shade and pattern of fixing of chequered tiles shall be as directed and approved by GE.
Demolition of cement concrete (un reinforced) not exceeding 15 cm thickness (above or below ground level) and removal of debris from site complete all as specified and as directed.
M&L for 50mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in plinth protection etc laid in altermate bays, finished even and fair at top without using extra cement and providing joints throughout the thickness of plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and as directed.
Taking down cement plaster of any description on concrete surfaces such as soffit of chajjas and brick walls etc including raking out joints, hacking for keys, scrubbing down with water and removal of rubbish off the premises complete all as specified and as directed.
M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4), surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered surfaces of wall and appying two coats of oil bound distemper over a primer coat of chalk whitening complete all as specified and as directed.
M&L for preperation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on walls complete all as specified and as directed.
Demolition of reinforced cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed. Note:- Reinforcement cut as required for facililate demolition.
M&L for reinforced cement concrete (nominal mix) type B-1 (1:2:4) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and as directed.
Use & waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landing horizontal or slopping similar work not exc 200mm thick, and flat fair finished surfaces complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6 m mean radius built in cement mortar (1:4) complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
M&L for water proofing treatment to sunken slab in following steps:- (i) Top of RCC slab in sunken portion including peripheral beams shall be plastered with 15mm thick in cement mortar (1:3) using approved water proofing compound @ 3% by weight of cement finished even and smooth using extra cement curved at the junction (ii) Apply two coats of epoxy resin/polymer modified cementations coating like brush bond of fosrock or equivalent both on floor and beams (iii) Sunken slab to be given 1:20 slope outward 25mm bore GI pipe spout with 300mm projection beyond outer surface of wall shall be provided (iv) Water tightness of sunken portion to be tested by ponding with water for 72 hrs. In case of even a slight mark of seepage the portion to be treated again and ponding shall be carried out again to confirm the water tightness of sunken slab (v) The sunken portion will be filled with lean concrete (1:4:8) type D2 using brick aggregate to required depth complete all as specified and directed by authorised manufacturer's instructions.
RAJEEV KUMAR
Prahalad Rai
ALAM ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .