Construction of Brick Boundary wall, Earth filling, Sand graveling, Iron gate and Electrical connection at Suklai Driving school under Transport Deptt. BTC for the year 2023-24

Amount

Earth work in excavation by mechanical means(Hydraulic excavator)/ manual means in foundation trenches or drain (not exceding 1.50m in width or 10.00sqm on plain) including dressing of sides and ramming of bottoms, lift upto 1.50m including getting out the excavated soil and disposal of surplus excavated soil as directed withi a lead of 50m 2.8.1 All kinds of soil

Dry brick on edge flooring in required patern with bricks of class designation 7.5 on a bed of 12mm mud morter including fiiiling joints with jamuna sand with common burnt clay non modular bricks

Providing and laying in position cement concrete of specified grade excluding the cost of centering & shuttering (All works up to PL. 4.1.5 : 1:3:6 (1 Cement, 3 Course sand, 6 graded stone aggregate 20mm nominal size)

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete Up to plinth level 5.22.1 MS and Medium Tensile steel bars

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete above plinth level 5.22.A.1 MS and Medium Tensile steel bars

Centering and shuttering, propping etc. and removal of form for: 5.9.1 Foundation, footings, bases of columns etc for mass concrete

Centering and shuttering, propping etc. and removal of form for: 5.9.5 -Lintel, beams, plinth beams, girders, bresumerss and cantiliver with 12mm tk. Ply

Centering and shuttering, propping etc. and removal of form for: 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts

Providing and laying in position specified grade of reincorced cement concrete, excluding the cost of cetering, shuttering, finishing and reinforcement- (All works up to plinth level. 1:2:4 (1 Cement, 2 Course sand, 4 graded stone aggregate 20mm nominal size)

Reincorced cement concrete work in walls (any thickness), including attached pilaster, buttresses, plinth and string courses, fillets, columns, pillers, piers, abutments, post and struts etc. above plinth level up to floor level, excluding cost of cetering, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu-ral sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources)

Half brick masonary work with burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level. Cement morter 1:3 (1 cement, 3 Coarse sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)

13.91 Removing dry or oil bound distemper, water proofing cement paintand the like by scrapping, sand papering and preparing the surfacesmooth including necessary repairs to scratches etc. complete. sqm 20.85

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Finishing walls with water proofing cement paint of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm)

Earth work in excavation by mechanical means(Hydraulic excavator)/ manual means in foundation trenches or drain (not exceding 1.50m in width or 10.00sqm on plain) including dressing of sides and ramming of bottoms, lift upto 1.50m including getting out the excavated soil and disposal of surplus excavated soil as directed withi a lead of 50m 2.8.1 All kinds of soil

Dry brick on edge flooring in required patern with bricks of class designation 7.5 on a bed of 12mm mud morter including fiiiling joints with jamuna sand with common burnt clay non modular bricks

Providing and laying in position cement concrete of specified grade excluding the cost of centering & shuttering (All works up to PL. 4.1.5 : 1:3:6 (1 Cement, 3 Course sand, 6 graded stone aggregate 20mm nominal size)

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete Up to plinth level 5.22.1 MS and Medium Tensile steel bars

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete above plinth level 5.22.A.1 MS and Medium Tensile steel bars

Centering and shuttering, propping etc. and removal of form for: Foundation, footings, bases of columns etc for mass concrete Foundation, footings, bases of columns etc for mass concrete

Centering and shuttering, propping etc. and removal of form for: 5.9.5 -Lintel, beams, plinth beams, girders, bresumerss and cantiliver with 12mm tk. Ply

Providing and laying in position specified grade of reincorced cement concrete, excluding the cost of cetering, shuttering, finishing and reinforcement- (All works up to plinth level. 1:2:4 (1 Cement, 2 Course sand, 4 graded stone aggregate 20mm nominal size)

Reincorced cement concrete work in walls (any thickness), including attached pilaster, buttresses, plinth and string courses, fillets, columns, pillers, piers, abutments, post and struts etc. above plinth level up to floor level, excluding cost of cetering, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu-ral sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

Finishing walls with water proofing cement paint of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works .

16.78 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. 16.78.2 With material conforming to Grade-II (size range 53 mmto 0.075 mm ) having CBR Value-25

Excavating supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 KM also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

2.21 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

13.2 Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.

5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

5.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

13.2 Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.

Angle iron bracket ( 50 mm X 50 mm X 6 mm ) 65 cm long

Eye hook

Guy clamp

Supplying with erection of PSC pole 7.5 M length with PCC grouting as required complete etc as required and directed by the deptt.

Cable - Ariel Bouncheed Cable 1.1 KV (LT) Grade 10x70+1 c x70 sqm (messenger cum nutral) As per APDCL Rate 2021.

Supplying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV Gd solid Aluminium conductor up to 10 sqm balance granted conductor up to 10 sqm XLPE Insulated cores laid up PVC tape inner sheathed Armour (alluminium wire for tape core - - - 2x10 sqm, 3x10 sqm, 4x6 sqm. & balance all galvanized. steel strip) extruded PVC type STR sheathed 650/1100V grade as per IS 7908 (Part-I) ---- approved by the deptt.

Supplying with fitting and fixing Single phase Digital type Energy Metre tested with APSCL including Load Sequrity, Metre security, Labour charge and connection charge with all accessories materials as required complete as directed by the deptt. (2 KW load)

BIR BAHADUR PRADHAN