Karnataka

To Be Opened

Works

Buildings

Construction of Restaurant for Raja Lakhamgouda Udyana Kashi.

Karnataka Neeravari Nigam Limited

KNNL Division GRBCC Div No 2 Hidkal Dam | HUKKERI, Karnataka

Amount: ₹4.0 CrCloses: 16 Jun 2026Closed

Timeline

Published8 Jun 2026
Pre-Bid Meeting11 Jun 2026
Closed16 Jun 2026
Bid Opening18 Jun 2026

Tender Value

₹4.0 Cr

EMD Value

₹6.0 L

Closing Date

16 Jun 2026, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Karnataka Neeravari Nigam Limited

Contact Person

SRIMANT KAMBLE

Mobile Number

Work Description

Construction of Restaurant for Raja Lakhamgouda Udyana Kashi.

Tender Information

Tender ID

KNNL/2025-26/BD/WORK_INDENT4310

Reference Number

KNNL/2025-26/BD/WORK_INDENT4310

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

KNNL Division GRBCC Div No 2 Hidkal Dam

Source Website

Subscribe to view

Documents Required

20 documents required · 20 mandatory

Technical Bid

RequiredA copy of the valid Karnataka PWD Class-II Registration Certificate

RequiredCopy of Valid Employees Provident Fund Registration Certificate

RequiredEPF paid Challan of previous month with reference to the date of publishing of the present Tender Notification in e-procurement portal

RequiredCopy of Valid GST Registration Certificate

RequiredCopy of the Income Tax Return filed for the Financial Year 2024-25 Assessment Year 2025-26 mentioning the PAN

RequiredThe intending bidder/firm/company should furnish list of Man power, machinery available with them for taking up the work

RequiredTo qualify for award of this contract, each tenderer in his / her name in the last five years 2021-22 to 2025-26 should have satisfactorily completed at least 90 percentage of contract value as a prime contractor, at least one Similar nature of Work of value not less than Rs. 233.86 Lakhs Usually not less than 50 Percentage estimated value of contract Work done certificate issued by an officer not below the rank of Executive Engineer of the concerned Division and Countersigned by the SE

RequiredThe annual turnover from all classes of civil engineering works should be costing not less than Rs. 1020.50 Lakhs in any of the two financial years during the last five years 2021-22 to 2025-26 Audited profit and loss account certified by a practicing Chartered Accountant along with the copy of income tax returns filed for the years indicated above should be furnished

RequiredThe intending bidder should have executed in any one financial year ,following minimum quantities of work in previous 5 years 2021-22 to 2025-26 1. Earth work excavation-2167.84 cum 2. Concrete Including PCC & RCC 280.00 cum 3. Steel-57.78 Tonne 4.Brick Work -88 Cum & Brick Work-182.40 Sqm-

RequiredLiquid asset and or availability of credit facilities of not less than Rs.127.56 Lakhs Unconditional credit lines/letters of credits/certificates from nationalized banks for meeting the fund requirement etc. The contractor should upload necessary documents issued by the nationalized banks

RequiredThe intending bidder/firm/company/Joint venture should furnish details of ownership/ lease certificate of the following minimum requirement of machineries 1. Tippers-02 nos 2.JCB-2 nos Concrete Mixer-5 nos

RequiredInformation on works which are yet to be Completed Information should be given in format IV

RequiredInformation of Works for which Tender Acceptance Letters are received OR Tenders Approved. Information should be given in format V

RequiredInformation on the Works for which tenderer has submitted Tender Information should be given in format VI

RequiredInformation on litigation in which the Tenderer is involved. Information should be given in format X

RequiredBid Capacity Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will calculated as under Assessed available tender capacity AXNX1.5 -B

RequiredThe contractor should attach their recent correct portal address, Phone No. & mail address

RequiredThe tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works totaling Rs. 5.00 Lakhs in any one 2021-2026

RequiredThe Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works totaling Rs. 2.50 Lakhs in any one year 2021-22 to 2025-26

RequiredTie-Up The intending bidders shall submit bids as an individual bidder along with Tie-Up with Agency or Supplier of Solar panel work. The Tie-Up is to be formed prior to the bidding However, tender from a Tie up proposed in this bid, the bidder shall upload an agreement with only with Company or Supplier Solar panel work on Rs.200.00 stamp

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The amount put to tender is Exclusive of GST.The Contractor should quote the rate Excluding GST.Increase in GST shall not be paid in the extended period of contract for which the contractor is responsible for delay in determined by the authority while granting extension of time

First Electronic Document (TECHNICAL BID) SHALL CONTAIN THE FOLLOWING QUALIFYING DOCUMENTS A copy of the valid Karnataka PWD Class-II Registration Certificate

Copy of Valid Employees Provident Fund Registration Certificate

EPF paid Challan of previous month with reference to the date of publishing of the present Tender Notification in e-procurement portal

Copy of Valid GST Registration Certificate

Copy of the Income Tax Return filed for the Financial Year 2024-25 Assessment Year 2025-26 mentioning the PAN

The intending bidder/firm/company should furnish list of Man power, machinery available with them for taking up the work

Second Electronic Document shall contain financial Bid.The First Electronic Document (Technical bid) will be opened first and thereafter Second Electronic Document (financial bid) will be opened only of those bidders who qualify in the technical bid. In case the lowest bidder fails to produce the original documents for entering into an agreement or the original documents submitted does not match with the uploaded documents or found false, then his bid is treated as non-responsive bid as per clause -26(4) of the KTPP rules barred from participation in any of the tenders invited by the apart from forfeiting the EMD paid through E-cash

Second Electronic Document (financial Bid) of the successful bidders who qualify in the technical bid will be opened after approval to the technical bid from the competent authority

The necessary certificates/documents in support of pre-qualification criteria fulfilled as stipulated shall be scanned and attached to e-tender document

The scanned signature of the bidder /authorized representatives of the bidder shall be attached while uploading the bid document

Further information about e-tendering can be had from https://kppp.karnataka.gov.in

To qualify for award of this contract, each tenderer in his / her name in the last five years 2021-22 to 2025-26 should have satisfactorily completed at least 90 percentage of contract value as a prime contractor, at least one Similar nature of Work of value not less than Rs. 233.86 Lakhs Usually not less than 50 Percentage estimated value of contract Work done certificate issued by an officer not below the rank of Executive Engineer of the concerned Division and Countersigned by the Superintending Engineer of the concerned circle is to be uploaded for the technical bid. The cost of completed works of the previous year shall be given a weightage of 10% per year to bring it to the price level of financial year in which tenders are invited

The annual turnover from all classes of civil engineering works should be costing not less than Rs. 1020.50 Lakhs in any of the two financial years during the last five years 2021-22 to 2025-26 Audited profit and loss account certified by a practicing Chartered Accountant along with the copy of income tax returns filed for the years indicated above should be furnished, Duly mentioning UDIN on Turnover certificate (from CA). The annual turnover of previous year shall be updated to the year of tender invitation at 10% per annum

The intending bidder should have executed in any one financial year ,following minimum quantities of work in previous 5 years 2021-22 to 2025-26 1. Earth work excavation-2167.84 cum 2. Concrete Including PCC & RCC -280.00 cum 3. Steel-57.78 Tonne 4.Brick Work -88 Cum & Brick Work-182.40 Sqm

Liquid asset and/or availability of credit facilities of not less than Rs.127.56 Lakhs (Unconditional credit lines/letters of credits/certificates from nationalized banks) for meeting the fund requirement etc. The contractor should upload necessary documents issued by the nationalized banks as per prescribed format enclosed as Annexure -I to the notification

Availability by owning 50% of the required/specified flowing key and critical equipment for this work and the remaining 50% can be deployed on lease/hire basis for all works provided, the relevant documents (Commitment agreements etc.) for availability for the work are furnished (Documents to be scanned and enclosed)The intending bidder/firm/company/Joint venture should furnish details of ownership/ lease certificate of the following minimum requirement of machineries 1. Tippers-02 nos 2.JCB-2 nos Concrete Mixer-5 nos

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and complete the work at the accepted tender rates irrespective of the cost of the work

Necessary work experience certificate issued by the competent authority not below the rank of Executive Engineer, indicating the name/items of work executed, date of commencement, date of completion and the total cost of work executed shall be enclosed to the tender. Tenders without these details are liable for disqualification

To qualify for a package of contracts made up of this and other contracts for which tenders are invited in this IFT, the Tenderer must demonstrate having experience and resources to meet the aggregate of the qualifying criteria for the individual contracts

List of Key Technical personal required for the work are as under and should be enrolled in firm/company/Joint venture and their Employment register and document should be uploaded

Information on works which are yet to be Completed Information should be given in format IV

Information of Works for which Tender Acceptance Letters are received OR Tenders Approved. Information should be given in format V

Information on the Works for which tenderer has submitted Tender Information should be given in format VI

Information on litigation in which the Tenderer is involved. Information should be given in format X

Bid Capacity Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will calculated as under Assessed available tender capacity (AXNX1.5 -B)

Cover-II (Financial Bid): shall contain amount with detailed break up of amount quoted.The First Electronic Document (Technical bid) will be opened first and thereafter Second Electronic Document (financial bid) will be opened only of those bidders who qualify in the technical bid. In case the lowest bidder fails to produce the original documents for entering into an agreement or the original documents submitted does not match with the uploaded documents or found false, then his bid is treated as non-responsive bid as per clause -26(4) of the KTPP rules and barred from participation in any of the tenders invited by the KNNL apart from forfeiting the EMD paid through E-cash

The bid shall be technically evaluated based on the specifications indicated in Section-6 titled Contract Data and Scope of work in bid document

Tenders from Joint ventures are not acceptable

The Bidder/JV partner/ Tie up partner shall not be under Corporate Debt Restructuring (CDR) / Strategic Debt Restructuring (SDR) or Bureau of Industrial and Financial Reconstruction (BIFR) in the last 5 Years prior to bid submission date. In this regard, the Bidder shall submit along with Bid, a certificate from their Statutory Auditor with a declaration that, the Bidder is not under CDR / SDR or BIFR

During technical evaluation, if the employer finds that any certificates / information furnished is false, such bidders will be disqualified and barred from participation in the bid

If any bidder fails to satisfy the conditions mentioned above, such bids will be rejected and their financial bids will not be opened

The bidder should enclose the detailed methodology of execution of the scheme as per the scope of work

The Bidder shall be responsible for successful performance of the contract.The Bidder to participate in the tender under single bid basis only. Any violation will attract disqualification of the bid.

The contractor/authorized signatory should attach his/her scanned signature to the Schedule-B before uploading and also submitting their tenders

If any of the dates mentioned above happen to be a general holiday, the next working day holds good

Conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever

If the percentage quoted by the contractor for the work is below ninety percent of the updated recast estimated amount put to tender, then the contractor shall furnish an additional performance security in the form of Bank Guarantee for an amount equivalent to the difference between the cost as per quoted percentage and 90% of the updated cost put to tender. In case of contractor quoting above 125% of updated cost put to tender, then the over and above 125% of the updated cost put to tender will be withheld during the progress of work. The additional performance will be released proportionately to the bill amount till the contractor achieves progress of the entire cost of the work as per agreement. The withheld amount in the later case will be released only after entire work contracted is fully completed and so certified by the Executive Engineer. (If BG submitted while issuing fresh BG or extending any existing BG, claim period of a minimum one year from the date of expiry of validity period of BG is to be specified invariably)

They should abide by the directions of Government towards recovery of 1percentage (or as modified by the Government from time to time) Cess from the contractors bill under the provisions of building and other constructions worker welfare cess Act 1996

The contractor is responsible for any damages due to natural calamity the government or Nigam will not give any compensation for until the completion of maintenance period

The intending bidder/firm/company is advised to visit the work site before submission of the tenders

The contractor should mention their recent correct portal address & mail address in declaration forms

The tender processing charges paid by the bidder/firm/company are not refundable even if the tender is cancelled

All materials like steel, cement etc., required for successful completion of the above work should be procured by the contractor only. No supply of any materials shall be made by KNNL

The bidder/firm/company shall send the authorization letter for their representation duly attending their signature

Maintenance period/Defect liability period for this work is 12 months from the date of completion of work

The bidder/firm/company shall adhere to accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work & also land acquisition problems if any

Typographical errors if any will not be the ground for any claims by the bidder/firm/company

For Construction of transmission line/Substation Works,the Contractor shall engage only those agencies who are licensed to do the power line construction works in Karnataka .They length of power line for the work tendered in a single contract .The details of the transmission line construction contractor with registration certificate and certificates of experience signed by an officer of not below rank Executive Engineer of KPTCL shall be submitted for KNNLs verification post award of the Work

The Work of the construction of transmission line should be got done through a government licensed ,Super Grade Electrical Contractor CEIG Approved ,who have the experience of carrying out such works

Further any information / queries / clarifications can be had from the O/o the Executive Engineer KNNL, GRBCC, Div-2, Hidkal Dam-591107 or through phone No. 08333-263242, email: eegrbc2atgmail.com during office hours

Corrigendum, Addendum & Time Extension will be published in the website https://kppp.karnataka.gov.in for all modifications / corrections / changes in calendar of events if any. The decision of the undersigned in the matter is final & binding on / to all the intending / participating bidders.

Other terms and conditions as per Bid document & Tender Notification

The tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works totaling Rs. 5.00 Lakhs in any one year (2021-22 to 2025-26) .Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d). The letter of willingness of the sub-contractor to be engaged for electrical works should be obtained and uploaded in the KPP-portal

The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works totaling Rs. 2.50 Lakhs in any one year (2021-22 to 2025-26). Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e). The letter of willingness of the sub-contractor to be engaged for water Supply works should be obtained and uploaded in the KPP-portal

Tie-Up: The intending bidders shall submit bids as an individual bidder along with Tie-Up with Agency or Supplier of Solar panel work. The Tie-Up is to be formed prior to the bidding However, tender from a Tie up proposed in this bid, the bidder shall upload an agreement with only with Company or Supplier Solar panel work on Rs.200.00 stamp paper in the prescribed format which shall be concluded prior to bidding and enclosed to the bid Document. For proof of the Tie up in the Technical bid in the prescribed format under section 2 of instruction to bidder (multiple tie up not allowed).

Technical Criteria

Past Experience

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3To qualify for award of this contract, each tenderer in his / her name in the last five years 2021-22 to 2025-26 should have satisfactorily completed at least 90 percentage of contract value as a prime contractor, at least one Similar nature of Work of value not less than Rs. 233.86 Lakhs Usually not less than 50 Percentage estimated value of contract Work done certificate issued by an officer not below the rank of Executive Engineer of the concerned Division and Countersigned by the Superintending Engineer of the concerned circle is to be uploaded for the technical bid. The cost of completed works of the previous year shall be given a weightage of 10% per year to bring it to the price level of financial year in which tenders are invited months of peak construction period)

Satisfactory Performance Certificate

Work Done Certificate

Capabilities of Vendor

Line of Credit

Financial Status

Audited CA Certificate of Annual Turnover

Others

A copy of the valid Karnataka PWD Class-II Registration Certificate

PWD Registration Certificate (Class I/II/III/IV)

Copy of Valid Employees Provident Fund Registration Certificate

Valid EPF Certificate

EPF paid Challan of previous month with reference to the date of publishing of the present Tender Notification in e-procurement portal

Others -- EPF CHALLAN

Copy of Valid GST Registration Certificate

GST Registration

Copy of the Income Tax Return filed for the Financial Year 2024-25 Assessment Year 2025-26 mentioning the PAN

ITR Filed Copy (Mentioning PAN)

The intending bidder/firm/company should furnish list of Man power, machinery available with them for taking up the work

Others -- MAN POWER AND MACHINERY

Others -- Equipment List

Information on works which are yet to be Completed Information should be given in format IV

Others -- Works which are yet to be Completed

Information of Works for which Tender Acceptance Letters are received OR Tenders Approved. Information should be given in format V

Others -- Tender Acceptance Letters are received

Information on the Works for which tenderer has submitted Tender Information should be given in format VI

Others -- Works for which tenderer has submitted

Information on litigation in which the Tenderer is involved. Information should be given in format X

Others -- litigation in which the Tenderer is involved

Others -- Bid Capacity

The contractor should attach their recent correct portal address, Phone No. & mail address

Others -- Address

Others -- Electrical Building Work

Others -- similar building water supply/sanitary engineering

Others -- Tie-Up

Work Locations

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹6.0 L

Important Dates

Last Activity

8 Jun 2026

Published

8 Jun 2026

Bid Opening

18 Jun 2026

Download Ends

10 Jun 2026

Pre-Bid Meeting

11 Jun 2026

BOQ Preview

•

Construction of Restaurant for Raja Lakhamgouda Udyana Kashi.

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Earth work excavation for Foundation by mechanical means for allworks & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation,top...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all material...

•

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/ stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inclu...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth Complete with all ...

•

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

•

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever req...

•

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...

•

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works including preparing the surface after thorougly cleaning o...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

•

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...

•

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...

•

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

•

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. in...

•

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. Complete with all lead and lift as directed by Engineer In...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

•

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

•

Flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with p...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc.Complete with all lead and lift as dire...

•

Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door we...

•

HOLD Fast. Complete with all lead and lift as directed by Engineer In charge

•

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type). Complete with all lead and lift as directed by Engineer In charge

•

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

•

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. Complete with all lead and lift as directed by Engineer In charge

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

•

Providing and fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL 9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and le...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

•

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

•

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...

•

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all Complete with all lead and lift as directed ...

•

Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all Complete with a...

•

Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all Complete with all lead and lift as...

•

Providing and laying 100mm thick pre-cast cover slabs over Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 500 @ 6kg/m2, slabs jointed in CM 1:3...

•

Supply and fixing of "Self Supported standing seam roof System"at all heights , levels and locations 0.90mm thick, Aluminium profile sheet of Alloy 3004/ 3005 / 31500 / 31000, confirming to IS1254, IS...

•

Providing and Fixing of Aluminium Flashings manufactured from aluminium alloy 31500 /31000 with thickness of 0.9 mm & the same finish as panel, complete as per drawing and instructions of the Engineer...

•

Supply and fixing of Single skin Aluminium gutter of thickness 2.0mm and size of width 400mm x 325mm depth manufactured from GRADE AA 1100 ALLOY with EPDM Expansion joints every 8/12m length with down...

•

Supply, Fabrication including cutting, welding, Transport, Erection & commissioning of Circular Hollow Tubes of Dia.219.1 x 4.8 mm thick, for Steel Columns. Steel grade YST 310 confirming to IS 1161:2...

•

Supply, Fabrication including cutting, bending, welding, Transport, Erection & commissioning of Circular Hollow Tubes of Dia.219.1 x 4.8 mm thick for Rafters. Steel grade YST 310, confirming to IS 116...

•

Supply and Installation of mono Crystalline half cut Solar PV Modules of 540Wp each, with 144 Mono PERC cells per module set in anodized Aluminium Alloy frame with 3.2mm low iron glass and tempered gl...

•

supply & Installation of 15KWp Grid Tie Inverter, 415V,3 Phase, 50Hz output with max DC input of 19.5KW, 1000V and 13 plus 26A current. Maximum rated AC output of 15KW, 380 -440V, 23.9A current. The m...

•

supply & Installation of Transformer less 20KWp Grid Tie Inverter, 415V,3-Phase, 50Hz output with max DC input of 26KW , 1000V and 32+32 A current. Maximum rated AC output of 22KW, 380-440V, 30A curre...

•

Supply, fabrication & Installation of Structure for installation of 20 KWP Solar PV modules using MS Hot dipped Galvanized Structural Steel as per design. The structure will be firmly fixed to the roo...

•

supply & Installation of 3Ph 415v AC/ 1000v DC input , 50-60Hz, AC motor Drive, suitable for 6KWP Solar Array power with maximum input DC current of 16A, output current of 9.5A, suitable for motor of ...

•

Supply, laying and connecting of Low smoke, flame retardent, Single Core multi strand tinned copper conducter Solar cable with halogen free insulation of size 4sq.mm. with max. operating voltage of 15...

•

Supply and installation of DC Distribution board, a combination package of DC fuses, surge protection device (SPD), DC MCB / Isolator with MCR connectors satisfieng IEC-61439-1 standards as madnadated...

•

Supply and installation of AC Distribution board, with package of protection devices like DC fuses, surge protection device (SPD), MCB/MCCB / Isolator.All switches and circuit breakers, connectors sho...

•

Supply and installation of Array Junction Box (PV combiner box) 4 in 2 out, with fuses for oveload prtoection on each string and blocking diodes for reverse current flow protection confirming to IEC-6...

•

Supply and installation of Array Junction Box (PV combiner box) 1 in 1 out, with fuses for oveload prtoection on each string and blocking diodes for reverse current flow protection confirming to IEC-6...

•

Supply and installation of Maintenance free Chemical Earthing using Electrode of size 20 mm dia, 1.5 meter long low carbon steel rod coated with 99.9% copper . The voltage between Neutral & Earth not ...

•

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. Providing and f...

•

Providing and fixing plain multipurpose cement board(Hight pressure steam cured) 12mm thick confirming to IS-14862, cut to match the shape of the frame and fixing it to the frame with suitable screws....

•

Commissioning and Liasoning charges including fixing and approval of Solar PV system including metering cubilce from the Electricity Board Authorities Complete with all lead and lift as directed by En...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The...

•

Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement...

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm . etc. as required. 20 mm. Complete wi...

•

Supplying PVC flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF sc...

•

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

•

Supplying and fixing surface mounting unbreakable PVC modular box suitable for mounting modular switch plates with including necessary rawl plugs, Machine/NF screws etc., complete. 3 Way. Complete wit...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps one way Switch. Complete with all lead and lift as directed by Engine...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps Two way Switch. Complete with all lead and lift as directed by Engine...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps 3way socket. Complete with all lead and lift as directed by Engineer ...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module. Complete with all lead and lift as directe...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps One Way Switch. Complete with all lead and lift as directed by Engine...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP Switch. Complete with all lead and lift as directed by Engineer In...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket. Complete with all lead and lift as directed by Engin...

•

Supply of round/square recess/surface mounted rolling type LED Down light with . W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swive...

•

Supplying & fixing of retrofit type - LED bulb 12W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greterthan 70%. efficacy greterthan 80 lumen per W, life greterthan 2...

•

Supplying of 2'feet -PVC Batten with integrated LED tube20/22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greterthan 80. Power Input: 220-240V@ 50/60...

•

Supplying of 4'feet -PVC Batten with integrated LED tube20/22 W with high quality diffuser with Life of 25000 burning hours and 70% lumen maintenance with CRI greterthan 80. Power Input: 220-240V@ 50/...

•

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300mm). Complete with all lead and lift as directed by Engineer In char...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

•

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23...

•

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire. Complete with all lea...

•

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc...

•

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.Complete with all lead and lift ...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

•

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...

•

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. Complete with all lead and lift as directed by Engineer In charge.

•

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Complete with all lead and lift as directed by Engineer In charge.

•

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. Complete with all lead and lift as directed by Engineer In charge.

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe. Complete with all lead and lift as directed by Engineer In charge.

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers Complet...

•

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved Complete with all lead and lift as ...

•

Providing and fixing chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe w...

•

Providing and placing on terrace (at all floor level) Polyethylene water storage Tanks IS 12701 marked, with cover and suitable locking arrangements and making necessary holes of inlet, outlet and ove...

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore. Complete with all lead and lift as directed by Engineer In charge.

•

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

•

Providing and Fixing PVC Nahani trap of approved make conforming to ISI specifications (Rate is inclusive of cost of materilas and fixtures and conveyance of materials to work spot). Complete with all...

•

Providing and Fixing of SS floor drain trap of 150mm dia. And having min. thickness of 1.25 mm. Complete with all lead and lift as directed by Engineer In charge.

•

Constructing brick masonry road gully chamber (gully trap) 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame c ...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...

•

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. Complete with all ...

•

Providing and fixing SS Towel rod complete as per specifications and Complete with all lead and lift as directed by Engineer In charge.

•

Providing and fixing SS Soap Dish complete as per specifications and Complete with all lead and lift as directed by Engineer In charge.

•

Providing, Fitting and Fixing Grab Bar 692 mm long, Complete with all lead and lift as directed by Engineer In charge.

•

Providing, Fitting and Fixing Grab Bar vertical swing, satin including all works etc as per direction of architect and Engineer in charge. Complete with all lead and lift as directed by Engineer In ch...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

CIRCULAR3.pdf

Others - circular • 0.12 MB

NEW CIRCULAR.pdf

Others - circular • 2.81 MB

FD 4 PCL 2008_14OCT2008.pdf

Others - circular • 0.03 MB

FD576EXP122018-Circular_22MAY2018.pdf

Others - circular • 1.30 MB

notification.pdf

Instructions to Tenderers • 0.93 MB

FD611EXP-12-2023-Dtd-03-02-2024.pdf

Others - circular • 0.51 MB

FD951EXP-12-2024-Dtd-16-01-2025.pdf

Others - circular • 0.09 MB

FD506EXP-12-2024-Dtd-20-08-2024.pdf

Others - circular • 0.20 MB

KW4.doc

Tender Document • 50.91 MB

New Doc 01-17-2022 13-11.pdf

Others - circular • 0.45 MB

circular2.pdf

Others - circular • 0.20 MB

CIRCULAR4.PDF

Others - circular • 1.85 MB

circular1.pdf

Others - circular • 2.06 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

To Be Opened

Works

Buildings

Construction of Restaurant for Raja Lakhamgouda Udyana Kashi.

Karnataka Neeravari Nigam Limited

KNNL Division GRBCC Div No 2 Hidkal Dam | HUKKERI, Karnataka

Amount: ₹4.0 CrCloses: 16 Jun 2026Closed

Timeline

Published8 Jun 2026
Pre-Bid Meeting11 Jun 2026
Closed16 Jun 2026
Bid Opening18 Jun 2026