SPECIAL REPAIRS AND ALLIED WORKS AT DSC BARRACK (BLDG NO P-120) OF MO(K)

Amount

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm and removing from site complete all as specified and directed.

Same as item No.1 above but exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and directed.

S&F IInd class hardwood plain solid stright chowkhat and frame wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F MS work as in hold fast and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (Using 20mm graded stone aggregate) as in cills, copings, bed blocks for hold fasts and the like complete all as specified and directed.

S & F 35mm thick IInd Class hard wood rail and stail Plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003(Part I), kiln seasoned and chemically pressure treated as completed all as specified and directed.

M&L 35mm thick IInd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.(without sash bars) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkhats completed all as specified and directed.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

M & L Welded steel wire fabric weight n exc 4 kg/sqm fixed to steel members complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm ivory colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification and drawing complete all as specified and directed.

S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, S&F in frame at site as per specification & drawing complete all as specified and directed.

S&F Aluminum powder coated fixed type windows including suitable nylon beading channel gasket etc complete with following specification :- Frame :- 60mmx40mmx1.80mm Panel :- 4mm thick ACP sheet / 5mm thick tinted/frosted glass of approved colour and design Note: Rate quoted is inclusive of S/F ACP sheet and tinted/ frosted glass.

S/F 100 mm long mild steel butt hinges medium weight complete all as specified and directed.

S&F aluminum anodized barrel tower bolt 200mm long of extruded section complete all as specified and directed.

S&F aluminum anodized sliding door bolt 300mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F aluminum bow handle "D" type anodized 150mm long complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair MS helical door spring 300mm long including roller and roller plate complete all as specified and directed.

S& F in repair stainless steel curtain rod 25mm dia including rings, end knobs and holding brackets complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness complete in roofing complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/blankets, any thickness including cover fillets and frame work complete all as specified and directed.

Dismantling timber scantiling 40 Sqcm and over in section unframed work in any position complete all as specified and directed.

M&L 4mm thick ACP panel as in eves board fixed with nails etc to MS frame works complete all as specified and directed. Note: MS Frame work shall be measured and paid separately.

M&L for 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and directed.

S&F for pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as complete all as specified and directed.

S&F for pre-painted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as complete all as specified and directed.

S & F of roof trusses (framed or tubular sections) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, tubular pipes or flat sections) including distance pieces, cleats etc conforming to Fe-290 Gde-E-165 complete all as specified and directed

S&F Fe 290 (Gde E-165) Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F for Powder coated aluminium snap grid frame work for false ceiling (grid size 600 x 600mm) fixed to walls with rawl plugs and screws and hang to roof members with 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastners 12.5mm dia 40mm long with and including 12mm thick mineral fiber ceiling board (Density 260 Kg/m2) size of 595x595mm fixed or laid / inserted to timber /GI/ Aluminium frame work complete all as specified and directed by Engr-in-Charge. (Make : Armstrong)

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.

M&L for precast cement concrete block masonry in type B1, 1:3:6 (20 mm graded aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:6 in foundation load bearing wall and wall complete all as specified and directed.

Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L 10mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&l for rendering 8mm thick in CM 1:4 using liquid WPC over 12mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even & smoothj without using extra cement complete all as specified and directed. Note: Water proofing compound shall be paid separately.

Supply only liquid water proofing compound complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed by Engr-in-Charge.

M&L 75mm thick PCC (1:3:6) type C-1 (Using 20mm graded crushed stone aggregate) as in plinth protection , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L 100mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L for Hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for joint free coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 15mm thick screed bed of CM 1:6 complete all as specified and directed.

M&L for joint free coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in wall surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 10mm thick rendering of CM 1:3 complete all as specified and directed.

Dismaintaing wall/floor tiling/ terrazo tile/ mosaic tiles/ pcc tiles incl. cement mortar bedding removing serviceable bles to store and rubbish off the premises as in repair complete all as specified and directed.

M&L for joint free Non-skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile not exc 0.11 Sqm, over and including 10mm thick screed bed in CM (1:4) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for Glazed ceramic coloured joint free tiles 450x300X7mm/600x300x7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:3), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) stone slab as in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust to match with marble shade over and including cement screed bed 15mm thick in CM (1:6) complete all as specified and directed by Engr-in-Charge.

M&L for two coats of oil bound distemper over a coat of 1.5mm thick wall care putty and one coat of alkali resistant primer to newly plastered surface including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M&L for preparation new plastered External surfaces for preparation of surface and applying two coats of weather proof (antifungal, Asian Ultima Protek) paint over a coat of suitable primer complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

Complete removal of existing surface finishes of external wall, preparation of surface and applying two coats of weather proof (antifungal, Asian Ultima Protek) paint over a coat of suitable primer complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint and primer shall be as per manufacturer's instruction.

M&L for preparation and complete removal of existing treatment and applying two coats of Oil bound distemper over a coat of 1.5 mm thick wall care putty and one coat of alkali resistant primer complete all as specified and directed. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bend any radius 110mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

S & F EURO GUARD PRO SQUARE UPVC RAINWATER GUTTER (220 MM), with all necessary fittings like MS flat iron, clamp, joints, end cap, corner drop, centre drop, etc complete all as specified and directed.

S&F PVC flushing cistern low level 8 to 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as specified and directed.

S&F in repair vitreous china WHB white with flat back of size 550x400mm with bracket including 32mm waste coupling and PVC waste pipe complete all as specified and directed including fixing of pillar tap supplied under item no 68.

S&F in repair vitreous china wash down water closet pan pedestal pattern white including fixing with trap including PVC matching seat cover complete all as specified and directed.

S&F in repair vitreous china squatting pan ‘Orissa pattern’ size 580x440mm white with integral foot rest including connection to trap, and flushing pipe, anti-syphonage pipe, etc and including lime concrete bedding complete all as specified and directed.

S&F in repair brass CP towel Rail 600mm long "D" type complete all as specified and directed.

S&F in repair chromium plated soap dish fixed to wall with screw complete all as specified and directed.

Supply only 15mm bore Pillar taps, in repair cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repair Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with PTMT Urinal spreader, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm spreading and levelling in layers n exc. 25 cm thick,complete all as specified and directed.

S&F Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness ,M-35 Grade with grey cement and no pigment all as specified and directed.

M & L for chequered colour cement concrete tiles 30x30cmx 25mm thick set jointed grey and pigment and pointed in neat cement slurry in floors/steps including screed bed or bedding layer of morter 15mm thick in cm 1:4 complete all as specified and directed

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation and getting out in soft/ loose soil complete all as specified and directed.

Removing excavated soil exc.250m but n.exc 500m and depositing where directed by Engr-in -charge.

Returning filling in including spreading, leveling, watering and well ramming in layers n exc 25cm thick (Soft/loose soil) complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass concrete type C2 1:3:6 ( 40mm graded aggregate) complete all as specified and directed.

M&L for cement concrete type B1 1:2:4 using 20 mm graded aggregate as in coping and use waste of formwork etc complete all as specified and directed

M&L 15 mm dia thick plaster on fair faces of brick or concrete surfaces in cement and sand mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L for precast cement concrete type B1, 1:2:4 (20mm graded stone aggrigate) in , cover slabs (for man holes etc.) and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

M&L for hume pipe septic tank 25 users capacity incl AC vent pipe, earth work excavation in soft/loose soil, erecting hume pipe septic tank in position, PCC 1:3:6 and all other accessories required such as vent cowl etc and making good the disturbed surface and removing surplus soil and old u/s septic tank, complete incl connecting to the sewer line etc complete and provide new connections to the new septic tank complete all as specified and directed

M&L cement concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC 1:3:6 type C2 with 40mm graded aggregate, dia of pipe 100mm complete all as specified and directed

S&F 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor complete all as specified and directed by Engr-in-Charge.

S&F 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floorcomplete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bend any radius 110mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bend any radius 75mm bore complete all as specified and directed by Engr-in-Charge.

M & L for Cement concrete in surface channels and drains in type B-2 1:2:4 (40mm graded aggregate) complete all as specified and directed.

Removing the surplus soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m from the starting point complete all as specified and directed.

Supply and laying 75mm inner dia of CPVC pipes with CPVC Sch 40 pipes & plain Sch 80 fittings and jointed with CPVC primer & solvent cement including taking down old unserviceable GI tubing, laid in trenches, complete all as specified and directed.

Supply and fix in trenches high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings, solvents of size 50mm dia complete all as specified and directed.

Supply and fix on wall/ concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings, solvents of size 25mm dia complete all as specified and directed.

S&F CPVC ball valve of size 50mm dia suiatable for CPVC pipe including necessary fittings and taking down old one complete all specified and directed.

Demolition of cement concrete in ground floors and paving not exc. 15cm thickness, above ground level in foundation.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sheet metal encl. with plug & socket etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L point wiring with 1.5 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic ( ISI marked ) fixed concealed on wall /roof except beam, column and RCC roof including chases cutting, modular white cover plate,flush metal box etc incl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for one light point controlled by one switch complete all as specified and as directed by Engineer-in-Charge.

Same as item No.97 but one fan point / exhaust fan point controlled by one switch & regulator complete all as specified and as directed by Engineer-in-Charge.

Same as item No.97 but one 5 pin 5 Amps Socket point controlled by one switch on same board complete all as specified and as directed by Engineer-in-Charge.

Same as item No.97 but one 5 pin 5 Amps socket point controlled by one switch on independent board complete all as specified and as directed by Engineer-in-Charge.

Same as item No 97 but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable as earth wire for one 6 Pin 16 Amps Socket outlet on independent board complete all as specified and as directed by Engineer-in-Charge.

S & F modular switch 1 way 6 Amps,1 module complete all as specified and as directed by Engineer-in-Charge.

S & F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and as directed by Engineer-in-Charge.

S & F Modular socket 6 Amps and 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge.

S & F Modular socket 6 A/16 A - 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge.

S & F Modualr type switch 15 A One way SP complete all as specified and as directed by Engineer-in-Charge.

S&F Tubelight fitting 1 x 20 w ,with T 8 LED tube with aluminium Extrusion heat sink for optimum performance with Luminarie Efficiency 120 Lum/Watt and batten pre wired suitable for use with LED tube with concealed accessories complete all as specified and as directed by Engineer-in-Charge. Make Havells Cat Part No Make : REGALBATTENT8UPTO1X22WSSBSWH & LED rod CRYSTAL 1213T8DSTL 20 WLED 865 SGLASS/CG/WIPRO or equivalent of any other make in the list of approved manufacturer.

Supply and fixing building security light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection of 30 Watt, not less than 120 Lumen/Watt. Crompton Cat Part No. Crompton Cat Part No. LSTP-60-CDL-M or equivalent of any other make in the list of approved manufacturer including suitable GI bracket of 25 mm dia and fixing arrangement on walls complete all as specified and as directed by Engineer-in-Charge.

S&F of Led Recessed mounted 600x600 mm Luminaire having power consumption not more than 30W and light output not less than 3600 Lumens with System efficacy> 120 Lumen/Watt . Housing Shall be made up from single piece CRCA body without welding to avoid rusting and Polystyrene diffuser to reduce glare. The Luminaire should be having minimum 50000 Burning hours(L70B50) with CRI ≥80, SDCM<5,and Co-related color temperature (CCT) of 6500K.The luminaire shall be flicker free with a ripple content less than 5 % .The luminaire must have 4KV surge protection integrated in driver, PF≥0.95, Total harmonic distortion THD≤10% and Operating voltage range 140-270V with High voltage cutoff@325 ± 15V with Auto restart feature. Luminaire and driver shall be separately BIS approved of same make equivalent to Philips RC380B LED36S-6500 G5 L60W60 PSU OD or equivalent of any other make in the list of approved manufacturer.

Supply & fix ceiling fans complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star ratedcomplete all as specified and as directed by Engineer-in-Charge. Make CG Cat Part Energion HS BLDC/Havells/Usha or equivalent in the list of make. Note :-Old exhaust fans will be deposited in MES store yard

S&F fan regulator electronic 5 step type, modular type, 120 W, 2 module complete all as specified and as directed by Engineer-in-Charge.

M&L Earth continuty or main earthing lead fixed to wall on betten / recess / chases / burried in ground including drawn in conduit/pipe / fixed to poles / any other indicated situation for loop earthing etc as required 4 mm dia galvanised iorn Strip complete all as specified and as directed by Engineer-in-Charge.

Taking down old DBs with MCCB/MCBs of any size complete all as specified and as directed by Engineer-in-Charge.

S&F Sheet metal enclosure TPN for DB's when MCB's to be used 4 way with 200 amps bus bar double door IP 43 glazed door complete all as specified and as directed by Engineer-in-Charge. Make Havells cat No DHDMTVOSRW04 or equivalent of any other make in the list of approved manufacturer.

S&F SPN sheet metal enclosure for DB 8 ways Double door complete all as specified and as directed by Engineer-in-Charge.

S&F MCB 'B' Curve 63 Amp 4 pole, 415 Volts, complete all as specified and as directed by Engineer-in-Charge. Make Havells Cat Part No. DHMGCTPF063 /L&T/ Legrand or equivalent to list of make.

S&F MCB B' Curve 6-32 Amp SPN ,240 Volts complete all as specified and as directed by Engineer-in-Charge. Make Havells Cat Part No. DHMGCSNF006-032 /L&T/ Legrand or equivalent to list of make.

S&F MCB 'B' Curve SP 6 To 32 Amp , 240 Volts, complete all as specified and as directed by Engineer-in-Charge. Make Havells Cat Part No. DHMGBSPF006-032 /L&T/ Legrand or equivalent to list of make.

Taking down old sub main wiring of any size complete all as specified and as directed by Engineer-in-Charge.

M/L submain wiring with 2 single core 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn throgh and including PVC rigid conduit concealed wiring inculding necessary PVC conduit specials including chases cutting complete exceapt beam and RCC roof and one run of 4 Sqmm PVC insulated unshearthed single core 1100 volts grade multistranded copper conductor cable as earth continuity conduto9r and connceting with suitable size thimble complete all as specified and as directed by Engineer-in-Charge. Note: two run of 4 sqmm size PVC cable , one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length complete all as specified and directed.

Taking down old earthing complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing of heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep all as specified and directed by Engr-in-Charge. model -turboforce SP of Havells or any other make from approved list of manufacturer.

Material and labour earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below normal ground level surrounted from all side by 15 cm of thick and packed layers of charcoal dust and common salt ,filling alternate layers and electorde connected by using GI wire 4 mm dia (max -length of 7.5 mtrs )by means of bolts,nut and washer of GI and providing GI light grade pipe 15 mm dia as prrotection pipe for GI wire connected main controll board / test point and provided with GI pipe of light grade 20 mm bore for watering and including funnel,wire mesh PCC chamber of 1;3;6 type C1 ,and RCC cover of 1;2;4 type B1 including necessary earth work in any type of soil /strata disposal of soil complete all as specified and as directed by Engineer-in-Charge and shown in electrical plate No. 3 of SSR part -1 including testing on completion .

Supply & fixing, jointing, connecting & testing in trenches XLPE/PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminum conductor in trenches / ducts/Wall of size 3.5 core 50 Sqmm complete all as specified and as directed by Engineer-in-Charge.

S&F GI tubing light grade of size 40 mm dia with all fittings laid in trenches complete all as specified and as directed by Engineer-in-Charge.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engineer-in-Charge.

Supplying and laying reinforced precast concrete cable cover, class LV, type 1, flat size 250mm x 150mm x 40mm complete all as specified and as directed by Engineer-in-Charge.

Taking down old GI/ CPVC pipe of size 40 mm complete all as specified and as directed.

Taking down old GI/ CPVC pipe of size 25 mm complete all as specified and as directed.

Taking down old GI/ CPVC pipe of size 20 mm complete all as specified and as directed.

Supply and fix in on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 40 mm dia complete all as specified and directed.

Supply and fix on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 20 mm dia complete all as specified and directed.

Taking down old bib tap, stop cock,shower ,pillar tap,sink cock,angle valve, health faucet, Self closers Pressmatic & angle cock etc complete all as specified and as directed.

Supply and fixing of Bip cock , CP quarter turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed by the Engineer-in-charge.(Make : Model No F2008151 of Cera or prayag/hindware/Jaquar)

Supply and fixing of Bip cock, CP quarter turn with flange and areator, fancy type long nose with wall flange cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed by the Engineer-in-charge.(Make : Model No F2008152 of Cera or prayag/hindware/Jaquar)

Supply and fixing of CP Bip cock short body with flange and nozzle for garden/wahing machine of size 15 mm including necessary fixing accessories with GI/CPVC pipes complete all as specified and as directed by the Engineer-in-charge.(Make: CERA : Model No F2002153 of or PRAYAG /Jaquar)

Supply and fix concealed stop cock regular body,Quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20mm complete all as specified and as directedby the Engineer-in-charge.(Make : Model NO: F2002362 of Cera or prayag/hindware/Jaquar)

Supply and fixing 15 mm angle valve, half turn with flange, with flange type chromium plated for fixing accessories for for CPVC pipe complete specified and as directed by the Engineer-in-charge.(Make : Model No: F2008201 of Cera or prayag/ hindware/Jaquar)

Taking down old PVC connection complete all as specified and as directed.

Supply and fixing PVC connection pipe 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm GI pipe complete all as specified and directed by the Engineer-in-charge.

Supply and fixing health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe , including taking out old one all as per specified and directed (Make : Model No: F8030105AB of Cera or prayag/hindware/Jaquar).

Supply and fixing in pillar taps, spout with areator, cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed for 15mm bore pipe,complete all as specified and directed by the Engineer-in-charge.(Make : Model No: F2008101 of Cera or prayag/hindware/Jaquar).

Supply and fixing of swivel overhead shower of PTMT any colour with shower arm 15 mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe and taking down old one complete and all as specified and as directed by the Engineer -in-Charge. Cat Part No. F7010212AB of Cera or equivalent inthe list of make.

Taking down old CPVC ball valve of size 20 mm /25 mm/40mm complete all as specified and directed.

M & L for CPVC Ball Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.

M & L for CPVC Ball Ball Valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.

S/F float valve synthetic(PVC) of size 40 mm dia high pressure with polythene ball of size 6" dia and flynut complete all as specified and directed.

Supply and Fixing CP angle cock,Self closers Pressmatic with wall flange and 200 mm connecting pipe for urinal pots to fixed in 15/20 mm Pipe,complete all as specified (Make : Cera Model No: F9020203 or prayag/hindware).

Taking down old float valve synthetic(PVC) of size 40 mm complete all as specified and directed.

Surface dressing n exc 15cm deep in soft/ loosed and removal of outside of MD land

M.J.JOY AND COMPANY

Powertech Engineers

M/s ANTONY THOMAS AND CO

WELTRONENGINEERINGSERVICES

Padmaja Specialities