SPECIAL REPAIRS TO SAILORS INLIVING BLOCK JAIVEER (P-131) AT INA, EZHIMALA

Amount

Demolition of cement concrete in ground floor and paving not exceeding 15 cm thickness above or below ground level including existing tile all as directed.

Material and labour for Plain cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in plinth protection, 50mm thick finished even and smooth without using extra cement all as specified and as directed.

Material and labour for 25mm thick Plain cement concrete 1:2:4, type B0, using 12.5mm graded stone aggregate as sub base rough finished all as specified and as directed.

Material and labour for joint free non skid ceramic tiles, light shade 7 to 8mm thick, area of each tile exceeding 0.18sqm but n exc 0.38sqm size as in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed layer in CM 1:6 complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortor bedding(but not backing) removing serviciable tiles and rubbish off the premises.

Material and labour for joint free non skid ceramic tiles, light shade 7 to 8mm thick, area of each tile exceeding 0.18sqm but n exc 0.38sqm size as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

Material and labour for glazed ceramic tiles, 450x350x7mm as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick backing coat in CM 1:4 complete all as specified and as directed.

Dismantling wall and ceiling boards of aluminium metal planks or insulation boards/slabs/blankets any thickness and specification including cover fillets all as specified and directed.

S&F GI frame work 605 X 605mm grid for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate chennel 0.9mm thick having two equal flanges of 15mm each and web 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fastener with and including ceiling section (not exc. 1.2m length) of 0.5mm thickness having kurled web of 50mm flange of 26 mm each with lips of 1050 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as specified and directed.

S&F 4mm thick E-board, multipurpiose, decorative type for ceiling, fixed on GI frame work with screws as per manufactures instructions all as complete all as specified and directed.

Taking down Chowkhats or frames exc. 1.5 sq. m but not exc. 4 sq. m each, with shutters (without taking off shutters from the frames) all as directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each, with shutters (without taking off shutters from the frames) all as directed.

M&L for Providing and fixing factory made uPVC white colour casement/sliding window/door, made of extruded profiles three track sliding frame (88mm x 52mm), 2/4 shutters. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, all complete and as directed. Note : a) Glazing, hardware hinges and fitting, EPDM rubber gasket etc. shall be measured and paid separately. b) Each member of window to be measured separately wrth clear length.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with in built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note : a) Glass or wiremesh shall be measured and paid separately. b) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. c) Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing 4mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane all as specified and as directed.

Supply and fixing aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40 mm fixed with aluminium wire staples all as specified and as directed.

S&F pressed steel frames,size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.

M&L for filling concrete inside pressed steel frames in PCC 1:3:6, type C-0, using 12.5 mm graded stone aggregate all as specified and as directed.

S&F 35mm thick scond class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed.

S&F 30mm thick first class hardwood glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc; sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (b) all as specified and directed.

S&F 150mm long aluminum anodized barrel tower bolts of extruded section fixed with stainless steel screws all as specified.

S&F extruded aluminum alloy anodized handle fabricated type 150mm size all as specified.

S&F Floor door stopper Overall length of cover plate 150mm of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor etc complete all as directed.

S&F aluminium anodised sliding door bolts 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed

M&L preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer all as specified and directed.

S&F for door seal with aluminium top and bottom fiber brush for glazed, skelten and panelled door to stop germs, mosquito, snake from outer side (for size n exc 1.2mtr) complete all as specified and directed by Engineer-in-Charge.

S&F 300mm long ordinary MS rat tail rod pattern springs including roller plate complete all as directed.

Taking down of cement plaster of any description or thickness/chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to received new plaster complete all as specified and as directed.

M & L for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L, 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces with liquid water proofing compound, surface finished even and fair, complete all as specified and as directed. Note: Liquid water proofing compound shall be measured and paid separately

Supply only liquid waterproofing compund.

M&L, 10mm thick rendering in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement, complete all as specified.

Dismantling cabinets boarding, any description, fixed in any position with Screws incl all fittings all as directed.

S&F in repair Prelaminated particle board 18/19 thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F PVC magnet catcher fixed with screws to wooden frames complete all as specified and directed.

M & L PVC lipping edge tape fixed with nails/glue complete all as specified and as directed.

S&F stainless steel self closing hydraulic hinges for shutter complete all as specified and as directed

S & F Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc all as specified and as directed

S&F curtain rod stainless steel grade 304, 20mm bore for window/door, fixed on existing or new brackets, cut to size as per site requirement including taking down existing MS curtain rod all as specified and as directed.

S&F curtain finial, stainless steel grade 304 for window/door fixed on 20mm bore pipe all as specified and as directed by Engineer in charge.

S&F stainless steel grade 304 curtain bracket, wall to wall for window/door fixed to wall with stainless steel screws all as specified and as directed by Engineer in charge.

Demolition of brick or stone / boulder masonry built in cement or cement lime mortar, including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and pre cast concrete articles and removing debris outside MD land all as directed.

M&L for providing pre-cast cement concrete block masonry with solid blocks, exc.10cm in width with PCC (1:3:6), type C1, using 20mm graded stone aggregate and set in cement mortar (1:6) complete all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and applying two coats of oil emulsion distemper over a coat of alkali resistant primer all as specified and directed

M&L for preparation of old treated ceiling surfaces and applying a coat of oil emulsion distemper all as specified and directed

M&L for complete removal of existing treatment on surfaces of wall by scrapping down, preparation of surfaces and applying two coats of oil emulsion distemper over a coat of alkali resistant primer all as specified and as directed.

M&L for preparation of old treated steel surfaces of any description not other wise described over 10cm width or girth and applying a coat of synthetic enamel paint complete all as specified & directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, approns and laid bedded and pointed in any mortar etc all as directed.

M&L granite slab (of any type) 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 20 mm thick screed bed of cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

Ditto all as above item No 54 but in one piece as in riser ,treads of stair, skirting / dado laid over 10mm thick cement screed in CM 1:4 complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed.

S& F 0.50 mm thick Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

S& F 0.5 mm thick Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,ridge etc fixed with self tapping screws , rivetting with existing roof sheets/ valley gutters, bolting on to parepat walls etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as directed by Engineer in charge.

S&F MS steel work in tubular sections (Circular/Square/Rectangular) as in post, trusses, brackets, purlins, rafters etc., conforming to IS 1161-1998 grade St-240 for hollow tubes including necessary welding etc complete all as specified and as directed.

Erection and fixing only steel work in tubular trusses (tubular, angle, square and rectangular etc ) including shaped washer etc. complete complete all as specified. Note : Serviceable materials obtained from item No 59 to be reused.

M&L Preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed.

Demolition of cement concrete in Roofs, floors (other than ground floors), staircases, landing, chajjas and similar suspended work all as specified and as directed.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 using water proofing Compound. Note: water proofing compound shall be measured and paid separately

M&L for cement concrete 1:2:4 type B1 (20mm graded stone aggregate) as in roof kerb, rounded or chamfered on edges, complete all as specified.

Material & Labour for providing and fixing stainless steel (Grade 304) railing/grill/gates made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement etc complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring of light, fan, socket or power socket complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets, MCB, MCCB, DB etc. and making good disturbed surfaces of walls, floor ceiling etc. all as directed

M&L point wiring complete with FRLS PVC insulated and unsheathed cable with 1.5 sqmm copper conductor single core multistandred 1100 volt grade conforming to IS 694 drawn through PVC conduit of suitable size, concealed / semi concealed / open with necessary fixing accessories such as bend, elbow, socket etc with fixing material and including FRLS 1.5 sqmm earth wire copper insulated wire connected to common earth dolly including taking down the old point wiring with fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and making good disturbed surfaces of walls, floor ceiling etc. complete all as specified for the following :- (a) One Light/fan/bell point controlled by one switch . Note : (i) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engineer in Charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) Note : (a) wiring shall be done by using colour code ie. Red, Yellow, Blue and earth wire shall be green colour. (b) quoted rate included cutting chases for fixing conduit.

All as per item No 68 here in before but for One 3 Pin, 5 Amps socket on same board with other switches all as specified and directed.

All as per item No 68 here in before but for One 3 Pin, 5 Amps socket on independent board all as specified and directed.

All as per item No. 68 here in before but for one 3 pin 15 amp socket on independent board with 2.5Sqmm unsheathed PVC insulated copper conductor FRLS cable including 2.5 Sqmm PVC insulated copper cable for earth continuity conductor on independent board all as specified and directed.

S&F ceiling rose 3 phase/PVC/polycarbonate isolated body all as specified and directed by Engineer in Charge.

S&F modular switch one way 6 Amps, 1 module including connecting up electrically complete all as specified and directed. Make : Legrand /Crabtree.

S&F modular socket 6 Amps, 3 pin 2 module including connecting up electrically complete all as specified and directed.. Make : Legrand/Crabtree.

S&F modular socket 6/16 Amps, 3 pin 2 module multipurpose including connecting up electrically complete all as specified and directed.. Make : Legrand/Crabtree.

S&F modular switch one way 16 Amps 1 way, 1 moduleincluding connecting up electrically complete all as specified and directed.. Make : Legrand/Crabtree.

S&F modular fan step regulator, 120W, 2 module, AC 230A including connecting up electrically complete all as specified and directed.. Make : Legrand/Crabtree.

M&L sub main wiring using 2 runs of 6 sqmm FR PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through concealed conduit along with 1 run of 6 Sqmm PVC insulated copper condutor FR cable as earth lead connected to common earth dolly complete all as specified including taking down the unserviceable wiring. Note : 3 runs of 6 sqmm PVC insulated copper conductor and one run of PVC conduit will be measured as one unit.

S & F sheet metal powder coated enclosure factory made for MCB DB, SPN 12 way with 200 Amps bus bar, 240 Volt, double door type, conform to IS 13032-1991 fixed/flushed on wall including electrically connecting up and taking down old unserviceable DB complete all as specified and directed.

S & F RCCB, Two pole, 240 Volt, 25Amps for earth leakage protection rincluding electrically connecting up using wiring lugs all as specified and directed.

S & F MCB SP, 240 Volt, 6 to 20Amps B serious breaking capacity 10KA including electrically connecting up using wiring lugs all as specified and directed.

Supply and fixing in repair LED light fittings 1x 20W, 220V, AC, decorative box type with driver holder including LED tube light internally prewired and including connecting up with twin core twisted copper flexible conductor cable of sutibale size all as directed.

Supply and fixing in repair LED light fittings mirror type, two feet, 1x 10W, 220V, AC, decorative type with driver holder including LED lamp internally prewired and including connecting up with twin core twisted copper flexible conductor cable of sutibale size all as directed.

S&F LED light fitting1x9W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as directed.

Supply and fixing LED street light fittings 35W, 230V, AC, outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver , lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection internally prewired and including connecting up with twin core twisted copper flexible conductor cable of sutibale size all as directed.

M&L for Earthing complete with using GI earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using 4 mm dia GI Wire as earth lead moulded and retreived to earth plate at one end and connected to main switch / control board at another end with and including 15 mm dia GI light grade from upper end of earth plate upto external face of the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provison of PCC 1:2:4 type B-1 (Using 20 mm Dia graded stone aggregate) duly reinforced with mild steel round bar 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handle with and including necessarry excavation and earth work including laying the pipe concealed in floor / wall allas per plate NO-3 of SSR Part-I complete all as specified and directed and testing on completiopn (Note:- If the desired resistance is not found earthing shall be redone by the contractor at no extra cost to Govt).

Material and Labour for Servicing of ceiling fans of 1200/1400mm sweep any type any make including taking down , dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins (02 Nos), cutter pins(02 Nos), and applying a coat of painting with synthetic enamel paint including 03 Nos blades, down rod, writing MES No/ Srl No on the ceiling fans Complete and refixing to the same location after servicing Complete all as specified and directed by Engineer-In-Charge.

All as per item No 87 here in before but for exhaust fan Complete and refixing to the same location after servicing Complete all as specified and directed by Engineer-In-Charge.

S&F LED luminaire round shape 12 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Removing building materials etc. (other than mtrl considered under schedule of credit) upto a distance of 3.00 km, beyond the100m lead included in the rates, including loading, unloading and stacking at destination complete all as specified and directed.

Schedule of Credit (Minus) Rs.36796.00 NOTE: Bidder shall insert credit amount of Rs. 36796.00 as rate in Green field under Col-5.

EURO ENTERPRISES (BID ID -3341821)

Gates Infra Construction Co (BID ID -3352830)

NRI BUILDERS AND MATERIAL SUPPLIERS (BID ID -3343016)

KDR CONSTRUCTION (BID ID -3343181)

RS ENTERPRISES (BID ID -3344789)

SANDR (BID ID -3347561)

EXCEL ENGINEERING (BID ID -3344601)

M/S V ASSOCIATES (BID ID -3357345)