Providing Compound wall alround the park, Gravel walking track, Childrens play area and Open Gym at GPR Layout in Perumallapalli Village of Tirupati Rural Mandal.

Earthwork excavation for foundations as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 mtrs, dressing of sides etc., complete up to 3mts depth in ordinary soils.

Sand Filling in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work

Plain Cement Concrete (1:4:8) using 40mm HBG metal with concrete mixture for foundations etc., laid in layers of not more than 15 cms thick well compacted including cost and conveyance of all materials, labour charges and curing etc., complete

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kgs),. 10 mm HBG crushed metal, 0.362 cu.m (471 kgs) , sand 0.407 cu.m (616 kgs.) and cement 380 kgs with water cement ratio of 0.48 (182.40 ltrs/ cu.m of CC)etc., to site and including all materials, operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department including hire charges for centering, shuttering, scaffolding for unsupported height up to 3.66 m using Steel pipes, jack props, wallers, Foot plates, brackets, steel Centering plates, etc., complete and excluding cost of steel and its fabrication charges for finished item of work. FOR FOOTINGS

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kgs),. 10 mm HBG crushed metal, 0.362 cu.m (471 kgs) , sand 0.407 cu.m (616 kgs.) and cement 380 kgs with water cement ratio of 0.48 (182.40 ltrs/ cu.m of CC)etc., to site and including all materials, operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department including hire charges for centering, shuttering, scaffolding for unsupported height up to 3.66 m using Steel pipes, jack props, wallers, Foot plates, brackets, steel Centering plates, etc., complete and excluding cost of steel and its fabrication charges for finished item of work. FOR PEDESTALS

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kgs),. 10 mm HBG crushed metal, 0.362 cu.m (471 kgs) , sand 0.407 cu.m (616 kgs.) and cement 380 kgs with water cement ratio of 0.48 (182.40 ltrs/ cu.m of CC)etc., to site and including all materials, operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department including hire charges for centering, shuttering, scaffolding for unsupported height up to 3.66 m using Steel pipes, jack props, wallers, Foot plates, brackets, steel Centering plates, etc., complete and excluding cost of steel and its fabrication charges for finished item of work. FOR PLINTH BEAM

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kgs),. 10 mm HBG crushed metal, 0.362 cu.m (471 kgs) , sand 0.407 cu.m (616 kgs.) and cement 380 kgs with water cement ratio of 0.48 (182.40 ltrs/ cu.m of CC)etc., to site and including all materials, operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department including hire charges for centering, shuttering, scaffolding for unsupported height up to 3.66 m using Steel pipes, jack props, wallers, Foot plates, brackets, steel Centering plates, etc., complete and excluding cost of steel and its fabrication charges for finished item of work. FOR COLUMNS

Plain Cement Concrete (1:2:4) using 20mm HBG metal with concrete mixture for foundations etc., laid in layers of not more than 15 cms thick well compacted including cost and conveyance of all materials, labour charges and curing etc., complete

Earth Filling with Ordinary Soil useful available excavated sand (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work.

Masonry Work in CM (1:6) Prop with Flyash Cement Solid Blocks of size 290X200X140mm for manufacturing of Flyash Solid Blocks using Flyash of 50Kgs/ sq cm, Cement of 15 KGs, Gypsum of 5 Kgs and Stone Dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., complete with a compresive strength not less than 50Kgs/ Sqcm for Walls for Walls for finished item of work as per SS 504.,

Plastering in Cement Mortar (1:4) 12 mm thick using best river sand from approved source including cost and conveyance of all materials, scaffolding, labour charges, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., FOR in SIDE

Painting to new walls with Acrylic Exterior Emulsion paint of two coats over cement primary coat of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all opertional, incidental, labour charges etc., complete for finished item of work as per SS 911 FOR EXTERNAL WALLS

Supply, fabrication and erection of steel structure in position by using MS tubes & pipes of all diameters as per IS -4923 including labour charges for fabricating all heavy steel works like trusses, stanchions, heavy beams and girders including cost of welding rods, power charges etc., and cost and conveyance of all materials and including labour charges for fixing heavy iron grills, Trusses, Stanchions, Heavy Beams and Girders erecting in position and fixing by using chain pulley blocks, Derek pole arrangements and cranes etc., complete and painting two coats with ready mixed Synthetic enamel paint of grade I in all shades having over a red oxide primer paint grade 1 primary coat (Total three coats) etc., complete as directed during execution. (TATA / SAIL / VSP / JINDAL) shall be used.

Supply and fixing of C.C. Kerb not less than M30 strength of size 600(length as directed by the department) X 450 X 110 mm thick with bottom thickness of 110 mm up to height of 400 mm and top width of 50 mm thick chamfering with 45° at starts at 400 mm height to 450 mm height as selected by the Engineer-in-charge from approved source/ factory which is laid on existing CC Bed in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and including cost and conveyance of all materials & labour charges including transportation charges from approved source, loading & unloading charges to site of work and internal transportation at site including contractor profit & overhead charges complete for finished item of work.

Flooring with Supplying precast terrazzo chequered tiles conforming to IS: 13801 using marble aggregates of size 10 mm , sand, marble powder, white cement pigments etc., with terrazzo topping not less than 6 mm of tiles overall size not less than 20 mm thick of any coloured shades. set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, complete for finished item of work, .

Supply, fabrication and erection of steel structure in position by using MS plates, flats, angles, channels and sheets including labour charges for fabricating all heavy steel works like trusses, stanchions, heavy beams and girders including cost of welding rods, power charges etc., and cost and conveyance of all materials and including labour charges for fixing heavy iron grills, Trusses, Stanchions, Heavy Beams and Girders erecting in position and fixing by using chain pulley blocks, Derek pole arrangements and cranes etc., complete and painting two coats with ready mixed Synthetic enamel paint of grade I in all shades having over a red oxide primer paint grade 1 primary coat (Total three coats) etc., complete as directed during execution. (TATA / SAIL / VSP / JINDAL) shall be used.

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for verandah openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with ready mixed Synthetic enamel paint gr-I over a Primary coat (Red oxide metal primer gr-I) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) steel bars below 36 mm of Fe - 500/500D grade (as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work in all floors. (In the absence of 18G binding wire, 2 Nos of 20G binding wire in tandem are to be strictly adhered).(Fe500)

Supplying and fixing G.I. Chain link fabric fencing of required width in mesh size 50x50 mm opening of 4 mm dia GI wire including strengthening with 2 mm dia wire or nuts, bolts and washers/welding in the MS angle frame/ RCC fencing posts as required complete as per the direction of Engineer-in-charge and including cost of all materials to site, incidental operational and all labour charges overheads & contractors profit etc., complete for finished item of work

Granular Sub-base/base/surface course with local materials (i.e., Gravel) (Table 400.13) by mix in place method normal construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete

Supply, Delivery and Commissioning of SURFING BOARD - SIZE(LXWXH): 1050 X 500 X 1200mm with main frame of 4 Nos shall be minimum of 65NB dia of thickness not less than 4.00mm & Handle pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of "C" class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded main frame with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Pins should be case hardened and centreless grinded finish for life long durability.All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. The Foot rust of Plastic of Size 1000 x 400mm. The handle pipes shall be further extended to the 32 NB dia on both sides.Paired rectangular tubes with four foot rests are linked to main frame. Foot rest shall be made of Aluminum material - LM26 grade. Total footrest structure is supported on base frame shall be made up of rectangular pipe of 48 X 48 X 2.9 mm and side frames shall be made up of 32 NB dia GI Pipes. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 90mm X 160mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick M.S. plate with " Tirupathi TUDA" emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity and also with DIN 79000 and CE 45001. including Excavation and Concreting the base of Equipment and installation.( Model No: OG01) Make: Sansun, Arahanth.

Supply, Delivery, Installation and Commissioning of DOUBLE SEATED PULLER-SIZE (LXWXH): 1550 x 700 x 1850mm with prime stand pipe shall be minimum of 100 NB dia of thickness not less than 5.00mm, Handle frame & Seat frame shall be minimum of 32 NB dia of thickness not less than 3.6mm & Connecting links shall be minimum of 25 NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The two handle frames are on top hinged over 50NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of size 300X300X2mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100 NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 90mmX160mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with " Tirupathi TUDA" emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity and also with DIN 79000 and CE 45001. including Excavation and Concreting the base of Equipment and installation.( Model No:OG 06) Make: Sansun, Arahanth.

Supply, Delivery, Installation and Commissioning of TAI CHI SPINNER 4 WHEELS -SIZE(LXWXH): 1200 x 600 x 1450mm with center pipe shall be of minimum 100NB dia of thickness not less than 5.00mm, Support frame shall be minimum of 32NB dia of thickness not less than 3.6mm & TAI CHI SPINNER rings shall be minimum of 25 NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded with Handle knobs are made from high quality nylon material. The rings are hinged over 32NB support frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 90mmX160mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with " Tirupathi TUDA" emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity.and also with DIN 79000 and CE 45001. includingExcavation and Concreting the base of Equipment and installation.( Model No:OG10) Make: Sansun, Arahanth.

Supply, Delivery and Commissioning of SEATED TWISTER 3 IN 1 -SIZE(LXWXH): 1000 x 1000 x 1450mm prime pipe shall be minimum of 100 NB dia of thickness not less than 5.00mm, twister plate support pipe shall be minimum of 65 NB dia of thickness not less than 3.6mm, Bottom frame support shall be minimum of 32NB dia of thickness not less than 3.6mm & Handle ring shall be minimum of 25 NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The twister plate is hinged over 65NB standing pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 90mm X 160mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with "Tirupathi TUDA" emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity and also with DIN 79000 and CE 45001. includingExcavation and Concreting the base of Equipment and installation.( Model No:OG 12) Make: Sansun, Arahanth

Supply, Delivery and Commissioning of AIRWALKER + LEG PRESS + SHOULDER BUILDER -SIZE(LXWXH): 1400 x 700 x 1450mm prime pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Bottom frame support shall be minimum of 32NB dia of thickness not less than 3.6mm & Handle ring shall be minimum of 25 NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The twister plate is hinged over 80NB standing pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require relubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 90mm X 160mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with "Tirupathi TUDA" emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity and also with DIN 79000 and CE 45001. including Excavation and Concreting the base of Equipment and installation.( Model No:OG 21 ) Make: Sansun, Arahanth.

Supply, Delivery and Commissioning of Single AIR WALKER SIZE(LXWXH): 1200 x 300 x 1450mm with Two prime stand pipes shall be minimum of 80 NB dia of thickness not less than 5.00mm, Pedestal frame shall be minimum of 32 NB dia of thickness not less than 3.6mm & Handle frame shall be minimum of 25 NB dia of thickness not less than 3.60mm are of "C" class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The two pedestal frames are hinged over 100NB prime stand pipes with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Foot rest shall be made of Aluminum material - LM26 grade.All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 90mm X 160mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with "Tirupathi TUDA" emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity and also with DIN 79000 and CE 45001. includingExcavation and Concreting the base of Equipment and installation.( Model No:OG 27) Make: Sansun, Arahanth.

Supply, Delivery and Commissioning of SIT UP BOARD- SIZE(LXWXH): 1650 x 500 x 900mm with footrest support & sit up board pipe shall be of 50 NB dia of thickness not less than 4.1mm. Handle frame & seat frame support shall be minimum of 32 NB dia of thickness not less than 3.6mm are of "C" class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. Sit Up Board frame is made with high quality FRP / SS 304 perforated material FRP BOARD SIZE(LXWXH): 1200 x 400mm . All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 90mm X 160mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with "Tirupathi TUDA" emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformityand also with DIN 79000 and CE 45001. includingExcavation and Concreting the base of Equipment and installation.( Model No:OG 40) Make: Sansun, Arahanth.

Supply, Delivery and Commissioning of ORBITRACK ADULT -SIZE(LXWXH): 1200 X 500 X 1500 with footrest support shall be of 50 NB dia of thickness not less than 4.1mm. Handle frame & seat frame support shall be minimum of 32 NB dia of thickness not less than 3.6mm are of "C" class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100 NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 90mm X 160mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with "Tirupathi TUDA" emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformityand also with DIN 79000 and CE 45001. including Excavation and Concreting the base of Equipment and installation.( Model No:OG 49) Make: Sansun, Arahanth.

Supply, Delivery and Commissioning of Arch Swing 3.0 Mtr x 1.25 Mtr x 2.8 Mtr.(L x W x H) Thickness of Pipe is 3" support Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Bearing :- The bearings used are “6202” permanent lubricated sealed bearing of repute brand. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all Excavation of Ground surface and Concrete work

Supply, Delivery and Commissioning of Roto Model Slide 1.5 Meter 3.5 Mtr x 0.6 Mtrsx 2.1Mtrs Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns.Powder and Primer should be of Ackzonobel make.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Four Seater MGR Dia.1.2 Mtr Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.MGR Seat :- Seats are made from best quality F.R.P. material with thickness of 5mm in attractive colours. Bearing :- Bearings are used are of “6209” and “30206” of reputed make. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work.

Supply, Delivery and Commissioning of Sea Saw 2.4 Mtr X 0.5 Mtr x 0.5 Mtr (L x W x H) Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Sea Saw Seat :- Seats are made from best quality F.R.P. material with thickness of 5mm in attractive colours. Bearing :- The bearings used are “6202” permanent lubricated sealed bearing of repute brand. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Rocking Boat 2.0Mtr x 1.25 Mtr x 2.1 Mtr. (L x Wx H) Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per S1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Bearing :- The bearings used are “6202” permanent lubricated sealed bearing of repute brand. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Bridge Ladder 2.1 Meter Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work

Construction of Pedestal for Inaugaration stone including earth work for foundation, PCC ( 1:4:8), Sand filling, Brick Masonary work in CM (1:6), Plastering in Cement Mortar (1:4) 12 mm thick, Painting to new walls with 2 coats over primary coat ( total 3 coats )of plastic emulsion paint, Fixing of Granite stone and Engraving letters , other incidental charges etc complete for finished item of work as per the dimension approved by the Engineer-in-Charge