Const. of 12 Bays New Bus Stand at Ambala City in Ambala District (Pdg. High Mast light and Street light).

Amount

1: - (I)Wires and Cables Suply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. Size 1.50 sqmm ( 48 / 0.20mm). 31.9 (i) d

2: - ( a )Main Switches Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections. Triple pole switch 32 amp. 415 Volts, 31.12 (a) (viii) Cat-B

3: - Moulded case Circuit breakers. 15 amp.to 60 amp. 415 V ,10 KA 3-phase. 31.12 c (i)

4: - (L)Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. 31.17a) (ii)

5: - Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 40 mm dia on flushed. 31.21 (xiv)

6: - (Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . 31.22(i)

: - Extra for using salt and charcoal / coke for pipe earth electrode as required. 31.22(ii)

: - Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired. 31.22(iii)

: - Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. 31.22(v)

: - Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . 31.22(xi)

: - Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material. 31.22(xv)

: - Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . 31.22(xii)

7: - Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 16 Sq. mm 2 Core Cable . 31.26 (v) Ard.

: - 10 Sq. mm 4 Core Cable . 31.26 (xxxix) Ard.

: - 25 Sq. mm 4 Core Cable . 31.26 (xIi) Ard.

8: - Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core . 31.28 (ii)

: - 25 Sqmm to 50 Sqmm Cable 2 to 4 Core. 31.28 (iii)

9: - (v)Pedestal . Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . M.S.pedestal of size 750 mm wide , 1200 mm high ,300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level . 31.33 (iii)

10: - Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Size 1.5 sqmm (3 / 0.81mm). 31.40 (i)

11: - Supply and erection of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. 4-way, TP & N (Vertical) (8+12) 31.41 (vi)

12: - S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including diging and refilling of earth including cost of suitable size socket cuppler for HDPE pipe including the cost of labour and material required to complete the job. HDPE Pipe 63/50 outer dia / inner dia. 31.67 (i)

13: - Supply and erection of module case circuit breaker single pole/ 4 pole on wall /on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 100 amp 31.69 v

14: - S/I/T/C of 16 Mtr. Long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside & outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 nos. Luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolds, installation at site complete the Job in all respect upto the Entire satisfaction of Engineer in Charge of the work. Thickness of Top Section = 3mm (Minimum) Bottom Section = 4mm (Minimum) Top Dia = 150mm Bottom Dia = 410mm Thickness of Galvanization Top = 65 micron (Min) Bottom = 85 micron (Min) 31.83 (ii)

15: - Supply and erection of decorative Pole 7 Mtr. GI PU painted Decorative pole with cast embellishment Top dia 114mm x 4.5mm GI tube and Bottom dia 195mm x 4.8mm GI with base plate size 400x400x20mm alongwith nuts and bolt 24x750x4 accessories required to complete the job in all respect including erection, fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work (TWINKLE lite / Mayfair / Twinkle luxmax / Keselec make). NS- 1

16: - Supply and erection of Double Arm Bracket, double designer bracket with cast embellishment 1500mm long accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work (TWINKLE lite / Mayfair / Twinkle luxmax / Keselec make). NS- 2

17: - Supply and erection of 90 watt LED Decorative light LED Decorative pole drop down light made of aluminium housing fitled with PMMA diffuser MF MVF 507 C accessories required to complete the job in all respect including erection on existing ornamental pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work. Make: TWINKLE lite / Mayfair / Twinkle luxmax / Keselec make). NS- 3

18: - Supply of LED Flood Light BARGEG 200W Make Bajaj/Philips/Crompton/Surya/Wipro/Havells as per approved make with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. NS- 4

19: - S/E of 0.3 KVA capacity inverter with SMF battery for aviation light in existing panel i/c the cost of labour charges and connections and petty material etc. for complete in all respect upto the entire satisfaction of the engineer-in-charge of work. Make of Inverter:- Lumineous / Microtek/ Sukam. make of Battery:- Exide/ Amron. NS- 5

20: - Foundation of 16 Mtr High Mast as per the Drawing of High Mast (L.S) NS- 6

M/s JSB Enterprises

Som Nath Contractor

Choudhary Electricals

GLOBAL POWER TECH