MIRPA 2018-19 -Pipe line extension for

Amount

2.10.1.2 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia

od36584/2018_2019/IA : Supplying ISI Marked best quality 160 mm dia PVC pipes ( 6 Kg/ cm 2) including specials such as bent, elbow and tees etc.as per site condition including cost taxes and conveyance of all materials, labour charges etc. complete as directed by the departmental officers at site ( preliminary pressure test for PVC pipe supplied at site should be done in the approved laboratory at contractors own expense)

od36585/2018_2019/IA : Supplying ISI Marked best quality250 mm dia PVC pipes ( 6Kg/cm2) including specials such as bent, elbow , tees and reducers (6 Kg/ Cm2) as per site condition including cost taxes and conveyance of all marterals , labour charges and all other incidental charges etc. complete as per directed by departmental officers at site ( preliminary pressure test for PVC pipes supplied should be done in the approved laboratory at contractors own expense)

od36531/2018_2019/IA : Laying and joining PVC pipes with required specials such as couplings, bends, tee, reducers, etc. with required quantity of cement solvent, including the cost for conveying to trenches, laying, laying, joining, testing, washing etc.

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

50.13.1 : 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

od36557/2018_2019/IA : supplying and fixing 250mm CID joint suitably connected with250mm PVC pipe including cutting and placing in accuracy etc complete

od25556/2019_2020/IA : MS pipes 250mm- Manufacturing supplying & fitting 250mm Dia MS pipe various length with shell thickness 6mm including painting with two coats of red oxide primer, laying the same to line and levels as directed by the departmental officers at site .

od25557/2019_2020/IA : MS Flange for 250mm pipe - Manufacturing supplying & fitting 250mm dia MS flange having shell thickness 10mm depth 75mm with suitable bolt holes fixing the flange in position with required welding around the flange pipe joint grinding for smoothing the welded portion including painting with red oxide primer etc. complete as per direction of departmental officers at site

od36570/2018_2019/IA : supplying and fixing 250 mm cast iron wheel valve including cost taxes and conveyance of all materials, labor charges etc. complete as directed by the departmental officers at site

od29411/2019_2020/IA : supplying and fixing ISI marked best quality 160mm dia PVC ball valve with necessary fittings including cost & conveyanceof all materials and labour charges for fixing and all other incidental charges etc.complete as directed by the departmental officers at site

od28399/2019_2020/IA : Supplying, laying, joining ISI marked best quality 250mm dia PVC (6 kg/cm2) tale piece

od33181/2019_2020/IA : supplying and fixing ISI marked best quality 300mm dia cast iron NRV with necessaryfittings including cost & conveyanceof all materials and labour charges for fixing and all other incidentalcharges etc.complete as directed by the departmental officers at site

Basil Joy

Bidder Name

Abraham

Basil Joy