SPECIAL REPAIR TO TOILET AT AIRMEN ,DSC BILLET AND P-55 BUILDINGS ALONG WITH UPGRADATION OF OMQ AND SMQ AT AF STATION SAMANA

Amount

Dismantling of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to a distance exc 1.5 km but n.exc 3 Km

M&L for Non skid, joint free (edge cut) coloured ceramic tiles of size 300X300X 7-8 mm thick as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for digital printed joint free (edge cut) coloured glazed ceramic tiles 300 X 450 X 8-10 mm thick as in skirting / dado etc laid over and including 15 mm thick backing coat in cement mortar 1:4,on stone masonary set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for light shade Virified Ceramic tiles 8 X 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

All as per item no 4 above but in skirtings, dados.

Taking down Chowkhats or frames with shutter (without taking off shutters from the frames) not exc. 1.5 sq. m each

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each

Taking down Aluminium/steel windows/ventilator with shutter and frames including glass panes/wire guage etc complete all as specified and direcetd.

S&F aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.30 mm

(b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.30 mm (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.29 mm (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.29 mm (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.29 mm Note:-(i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B

S&F aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with aluminium section of size 63 mm x 38.00 mm x 1.70 mm(cat No. 20036) thick , half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including M.S wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position complete. complete all as specified and direcetd. Note:-(i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B

S&F solid Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown under section 8 of SSR part II(2020).

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core , 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face complete all as specifed and direcetd.

S& F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all around lipping with 6 mm beading all as specified and directed

M & L 1.5 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and direcetd.

S&F 35 mm thick second class hardwood Glazed and skeleton shutters, open rebated and repared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and direcetd.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire stapless complete all as specified and direcetd.

M&L for preparation of new or previously untreated wood Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repairs Butt hinges of size 100mm , heavy weight, cold rolled stainless steel, and fixed complete all as specified and direcetd.

S&F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in repairs Extruded aluminium alloy handles, fabricated type, anodised of size 150 mm.

S&F in repairs 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed

M & L for Bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5kg. per sq. m per coat.

M&L for Polythene film, black, 50 micron laid in floors. complete all as specified and as directed.

M & L for 25mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) in flooring with WPC compound as per direction.

Supply only Liquid water proofing compound

Taking up or down 40mm steel tubing and connections, including cleaning for refixing or removal to store

Taking up or down 25mm steel tubing and connections,including cleaning for refixing or removal to store

Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store

Supplying and laying of CPVC pipes,20mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls/ceiling or in floors complete all as specified.

Supplying and laying of CPVC pipes,25mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls/ceiling or in floors complete all as specified.

Supplying and laying of CPVC pipes,40mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls/ceiling or in floors complete all as specified.

S&F in repairs 40 mm bore dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repairs 25 mm bore dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white with and soft closing seat cover,jet, closet pan size 660 mm x 415 mm x 830 mm, CI 'P' or 'S' trap including water closet seat cover of plastic,jet etc.complete incl necessary PVC waste pipe fitting, complete all as specified and directed.

Supply and fix in repairs white vitreous China wash hand basin (Flat back) of size 450 x 300 mm fixed on and including new brackets complete including, 32 mm size brass chromium plated waste coupling, 900 mm long PVC waste pipe, etc including all connection complete all as specified and directed.

Supply and fix in repairs 10 Litre capacity PVC valveless, syphonic action type, dual flush type(ISI marked) cistern, low level, white, with inlet, ball valve, float and handle & PVC flushing pipe including brackets complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm

S&F in repairs CP soap dish of suitable size(ISI marked) including all necessary fittings all as specified and directed .

S&F bib taps 15 mm bore dia, brass chromium plated, fancy type including all connection complete all as specified and directed. Cat No - FLR-5047N of Jaquar or equivalent of make mentioned in Appx B/approved by GE.

S&F angle cock 15 mm bore, brass chromimum plated fancy type including all connection complete all as specified and directed. Cat No - FLR-5053N of Jaquar or equivalent of make mentioned in Appx B/approved by GE.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 8 mm dia pipe with 1.00 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Cat No:- ALD - 573 of Jaquar or equivalent of make mentioned in Appx B/approved by GE.

S & F in repair 15mm chromium plated swivel shower rose with or without swivel joints sny size for fixing with 15 mm pipe incl shower arm 15 mm size , 195 mm long with bend of 45 degree. Make:- Cat No OHS-1999 of Jaquar or equivalent of make mentioned in Appx B/approved by GE.

S&F hot and cold sink mixer 15 mm bore, brass chromium plated, fancy type complete all as specified and directed. Cat No:- FLR-5309N of Jaquar or equivalent of make mentioned in Appx B/approved by GE.

S&F hot and cold mixer 15 mm bore, brass chromium plated, fancy type complete all as specified and directed. Cat No:- FLR-5273UPR of Jaquar or equivalent of make mentioned in Appx B/approved by GE.

S&F pillar tap 15 mm bore brass chromium plated, fancy type complete all as specified and as directed. Cat No - FLR-5015 of Jaquar or or equivalent of make mentioned in Appx B/approved by GE.

S&F in repairs toilet paper holder complete all as specified and as directed. Cat No:- AKP-35751P of Jaquar or equivalent of make mentioned in Appx B/approved by GE.

S&F in repairs two way bib cock brass chromium plated, fancy type complete all as specified and as directed. Cat No:- FLR-5041N of Jaquar or equivalent of make mentioned in Appx B/approved by GE.

S&F Bottle Trap (with Internal Partition) 32 mm Size with 250mm & 190mm Long with all Connection Pipes complete all as specified Make: Jaquar Cat No ALD-769L or equivalent of make mentioned in Appx B/approved by GE.

Supply and fix single towel rail 600 mm long fixed to wall ocmplete all as specified. Make:Jaquar AKP-35711PS or equivalent of make mentioned in Appx B/approved by GE.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed.

M&L for rendering 15 mm thick on stone surface or surface other than fair face of brick-work or on one side of lathing in cement mortar 1:4 ffinished even and smooth (without using extra lime or cement) complete all as specified and direcetd.

M&L for rendering 15 mm thick on stone surface or surface other than fair face of brick-work or on one side of lathing in cement mortar 1:6 finished even and smooth (without using extra lime or cement) complete all as specified and direcetd.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying three coats of white wash all as specified and as directed by Engineer-In-Charge.

M&L for preparation of newly plastered or unplasterd surface of wall and applying two coats of Distemper oil emulsion over one coat of primer, over two coat of cement base wall care putty all as specified & directed.

Complete removal of existing treatment of wall and applying two coats of Distemper oil emulsion over one coat of primer, over two coat of cement base wall care putty all as specified & directed.

M&L for Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for Green marble work 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes of internal dia /75100mm, jointed in cement mortar and taking out of trenches, if required complete all as specified and direcetd.

S&F PVC (SWR) pipes,bore dia 110mm,double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes,bore dia 75mm,double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm dia PVC(SWR) floor/nahani trap plain with grating including with solvent cement fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F PVC (SWR) bends(any radius ) of 75mm bore all as specified and directed.

S&F PVC (SWR) bends(any radius ) of 110 mm bore all as specified and directed.

S&F PVC (SWR) 110 mm bore junction single,(Single T) equal or unequal all as specified and directed.

S&F PVC (SWR) 75 mm bore junction single,(Single T) equal or unequal all as specified and directed.

S&F PVC (SWR) 110 mm bore branch piece,single (single Y) equal or unequal all as specified and directed.

S&F PVC (SWR) 75 mm bore branch piece,single (single Y) equal or unequal all as specified and directed.

S&F PVC (SWR) 110 mm bore vent cowl all as specified and directed.

S&F in repairs 20 mm dia & 1 mm thick mild steel chromium plated curtain rod including all fittings and fixtures complete all as specified & directed.

S&F in repairs mild steel chromium plated curtain bracket complete all as specified & directed.

S&F in repairs 18 mm thick prelaminated Medium density fibre board, exterior grade, fixed to timber frame-work with stain less steel screws complete all as specified and directed.

S & F in repairs 40 mm width of flap(when open) Continuous (piano) hinges,mild steel, bright finish or electrogalvanised

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishesin cement plaster 1:6 complete all as specified and direcetd.

M&L for Rendering 10mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces.

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tile all as per specified and directed.

M&L for Non - skid, coloured Ceramic tiles 7 to8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as per specified and directed.

M&L 15 -18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms,wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Dismantling cast iron work of any description

S&F 100mm bore dia,Cast iron soil, spun ,waste and vent pipes in any length with or without ears, with cement joints, fixed to walls all as specified.

S&F 75mm bore dia,Cast iron soil, spun ,waste and vent pipes in any length with or without ears, with cement joints,fixed to walls all as specified.

S&F cast iron bends (any radius) of 100mm bore with access door rest complete all as specified.

S&F cast iron bends (any radius) of 75mm bore with access door complete all as specified.

S&F Cast iron, floor trap, with grating outlet dia 100 mm, including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repairs PVC (SWR) pipes,bore dia 75mm,single socketed, in any length with rubber ring joints,fixed on wall or in floors including clamps complete all as specified and directed.

S&F in repairs PVC (SWR) pipes,bore dia 110mm,single socketed, in any length with rubber ring joints, fixed on wall or in floors including clamps complete all as specified and directed.

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for

M&L for plastering 10mm thick on concrete surface in CM 1:4, finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacture instruction complete all as specified and directed Note WPC will be measured & paid separately.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1( using 20 mm graded stone aggregate) in coping sunken portion, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Demolition of Brickwork or stone/ PCC block masonary/RCC jali, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for providing precast cement concrete concrete block Type C-1, 1:3:6 (using 20mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in Cement motar 1:6 complete in wall or pillars all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement.

M&L for Rendering 5 mm thick in cement mortar 1:4 on fair faces of ceiling surface, brick work or concrete surfaces and surface finished even and smooth without using extra cement.

M&L for preparation of new plastered or unplastered surface of wall and applying three coats of white wash, all as specified & directed.

Taking up or down 15mm bore dia steel tubing and connections, including cleaning for refixing or removal to store

S&F 15 mm bore Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specifed and directed.

S&F 20 mm bore Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specifed and directed.

Cutting chases, pinning in, making good to facings on stone concrete, block or slab wall, where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth

S&F in repairs fancy type chromium plated with long shank & cup (concealed type) 15mm bore dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F in repair 15mm bore dia size Bib taps, cast copper alloy,chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Grating round/square 150 mm size of PTMT (Minimum weight 100gms)

S&F in repair white vitreous china wash hand basin (Flat back) of size 550x400mm bowl type fixed on granite slab complete in, 32mm size brass chromium plated wastest coupling, 900mm long PVC waste pipe, PVC connection pipe, 450mm long with PTMT nuts and washer at both end etc complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms).

S & F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests,P&S trap including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm

S&F in repairs 15 mm bore dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repairs 20 mm bore dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed

Dismantling water tanks exc 500 ltr and n.exc 1000 ltr and removing to store

S&F 1000 ltrs capacity three layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform incl all fitting such as connection pieces with GI tank nipple for inlet, outlet, etc complete all as specified and directed

S&F in repair 20mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F 75 mm size Butt hinges, heavy weight, stainless steel, and fixed complete all as specified & directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm. in floors jointed over incl. 15mm thick Screed bed or bedding layer in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to matchcomplete all as specified and directed Engineer-in-Charge

S&F glazed coloured ceramic tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. incl 10 mm thick rendering in cement mortar 1:4 and finish the surface rough to receive the tile/ marble etc complete all as specified and directed Engineer-in-Charge

M&L 15-18mm thick granite stone slab of any type (cut, table rubbed and polished)half rounded at front face in steps, jambs, pillars, window cills, cooking platforms and like, bedded & jointed with grey cement slurry & pointing with coloured cement using marble dust with admixture of pigment to match with marble shade; laid over incl. 15 mm thick Screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement incl cutting space for sink and incl 25mm wide and 15-18mm thk half rounded granite strip of same color & texure above fixed with adhesive on front facing side of granite slab shelf to match complete all as specified and directed

M&L for Machine cut kota stone slab as in cooking platforms and like 18-22mm thick over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing jointed over incl. 15 thick Screed bed or bedding layer in (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed

S&F wooden plain fillets of 2nd class hardwood square, rectangular or triangular in section exc 3 Sqcm & n exc 6 Sqcm clean sawn, secured with nails or brads to match marine ply shutter complete all as specified and directed.

Dismantling of existing Kitchen cabinets of any type, of any description, fixed in any position including all accessories etc complete all as specified and directed

S&F 18 mm thick marine plywood fixed with screws to frame work as in cabinets cupboards etc complete all as specified and directed.

-ditto- as per item No. 123 above but 12 mm thick

ditto- as per item No. 123 above but 6 mm thick

S&F 1.00 mm thick decorative acrylic laminate of any colour any type fixed with approved adhesive as per manufacture's instruction complete all as specified and directed

S&F 0.80 mm thick white laminate type-1 fixed with approved adhesive as per manufacture's instruction complete all as specified and directed

S&F 4.00mm thick Sheet glass, (ground or obsured or frosted,on one side) in square n exc 0.5 sq. m in each pane fixed in kitchen cabinet complete all as specified and directed

S&F brass handles 75 mm long decorative cast type, polished bright fixed with screws complete all as specified and directed

S&F Stainless Steel Auto hinges of crank 0 to 90 degree fixed with screws to timber frame work etc complete all as specified and directed.

-ditto- as per item No. 130 above but upto 180 degree

S&F 55cm long stainless steel telescopic channel for sliding modular kichen rack fixed with screws complete all as specified and directed.

S&F Stainless Steel baskets made up of outer 5mm dia and internal 3mm dia Stainless Steel wire (SS grade 304) as mentioned complete all as specified and directed (Make Godrej/ OLIVE Silver accessories or equilavant as approved by G.E)

(a) Three shelf pullout

(b) Plain Basket pullout

(b) cutlery pullout

(d) Cup and Saucer pullout

(e) Glass Basket pullout

(f) Grain Trolly

(g) Glass basket pull out

(h) Stainless Steel carrousel (Revolving corner) with double wire basket complete (Make:- Godrej/ OLIVE Silver accessories or equilavant as approved by G.E)

(i) Stainless Steel waste basket holder fixed on back of cabinet shutter complete

(j) Stainless Steel double shelf rack of width 300 mm and ht 430mm fixed with screws to timber frame work complete

S&F in repair stainless steel sink w/o drainage board made of stainless steel of 1mm thick kitchen sink of size 495 x 420mm bowl size of 410 x 330 x 160mm with coupling,waste pipe and bracket etc complete all as specified and directed by Engineer-in-Charge

S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed Engineer-in-Charge

M&L for preparation of old plastered or unplastered surface of wall and applying two coats of Distemper oil emulsion all as specified & directed.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Taking down ceiling fan / Exhaust fan carefully by (disconnecting electrical connections) of any make and size,and submitted to MES store all as specified and directed

Taking down carefully by unscrewing fitting and fixtures such as ceiling fittings, bulk head fittings, tube light fittings etc all as specified and directed.

Taking down carefully by unscrewing main switch boards/cut out boxes/MCB DBs / complete sealing the cable end and making good disturbed surface by walls etc.

Labour for Fixing only fitting and fixtures such as ceiling fittings, bulk head fittings, tube light fittings etc which are retreived from the item no.149 all as specified and directed.

Taking down carefully sub main wiring complete of any type (batten / surface conduit) complete and making good disturbed surfaces complete all as specified and directed.

Material & Labour for point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn and including PVC concealed conduit/PVC cassing capping not less than 25 mm wide, including cutting channel and grooves in wall and trimming surface with or without reinforecement and making good surface with cement motar 1:3, all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc including PVC surface type terminal box of suitable size with PVC cover complete.

All as per item No 153 above but point wiring for one 5 Amps socket outlet on independent board controlled by one-way switch.

All as per item No 153 above but point wiring for one 5 Amps socket outlet on same board controlled by one-way switch.

All as per item No 153 above but One bell /Buzzer point controlled by one push button on the same board with other switch or independent with cable 1.5 sqmm size.

All as per item No 153 above but wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch.

Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement and making good surface with cement mortar 1:3 as direcetd by Engr-in-charge.

M&L Switch piano, flush type single pole, one way 6 Amp including connecting complete.

M&L Bell, AC, 230 volts, single pole including connecting complete.

M & L Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal, including connecting complete.

M & L Switch socket combination 2 in 1, 3 pin, 6 Amp flush type universal, including connecting complete.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd including connecting complete.

S&F in repairs Distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 240 volts, double door type,240 V fixed flush to wall complete all as specified and directed.

Supply and fix in repairs MCB’s single pole 6 to 32 Amps,10 KA, 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

Supply and fix in repairs MCB’s single pole & neutral, 20 Amps, 230 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 4.0 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC concealed conduit/PVC cassing capping not less than 25 mm wide with all necessary fitting and including one run single core multistranded copper conductor cable, of size 4 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete. Note: 2 Runs of main cable and one run earth wire with capping & casing/conduit will be measured as one RM for payment.

M&L for Ceiling rose, 3 terminal polycarbonate body 6 Amps, 250 volts AC, including connecting complete.

Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 20 amps.

S&F in repair energy efficient LED tube light fitting with built in LED & integral LED driver 18 to 20 watt, channel housing & diffuser of length 1200 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.

S&F in repair energy efficient LED tube light fitting with built in LED & integral LED driver 8 to 10 watt, channel housing & diffuser of length 600 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.

Supply and fix metal body exhaust fan heavy duty 300 mm sweep, AC, 240 volts, metal body, fixed as per manufacturer instruction, connecting with and including 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable including making suitable hole in wall/window and making good surface with cement mortar 1:3 ,connection complete all as directed by Engr-in-charge. Make:- havells/crompton/bajaj or equivalent of make mentioned in Appx B/approved by GE.

supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFMwith service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 2.5 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC conduit not less than 25 mm wide with all necessary fitting and including one run single core multi stranded copper conductor cable, of size 2.5 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete. Note: 2 Runs of main cable and one run earth wire with conduit will be measured as one RM for payment

Supply and fix Electric chimney, pyramide shape single phase of suction capacity 1000 M3/hr, 240 Wolt power supply and having stainless steel Baffle filter, push button for three steeped speed ontrol, LED light illumination the cook area along with its exhaust pipe expandable of 10 Feet with cowl cover including making suitable hole in wall/window and making good surface with cement mortar 1:3 for exhaust pipe.

Jagdamba Engineering