REPAIR/REPLACEMENT OF STREET LIGHT AND ALLIED WORK, REPAIRS TO IRP CHEMICAL DOSING AND REPAIR/MAINT TO LT CABLE, PANEL ETC UNDER GE (S) TEZPUR

Amount

Cleaning of overhead RCC tank at Pump House No. 05 of capacity 0.75 Lakh Gallon using following stages cleaning process including arrangement of necessary T&P, labour and Chemicals mechanize etc before starting process of cleaning complete all as specified and as directed. (a) Mechanized Dewatering (b) Sludge Removal (c) High Pressure Cleaning (d) Vacuum cleaning (e) Antibacterial spray (f) UV radiation

Cleaning of UG Sump at Pump House No. 07 and P-70 of capacity 0.28 Lakh Gallon using following stages cleaning process including arrangement of necessary T&P, labour and Chemicals mechanize etc before starting process of cleaning complete all as specified and as directed. (a) Mechanized Dewatering (b) Sludge Removal (c) High Pressure Cleaning (d) Vaccum cleaning (e) Antibacterial spray (f) UV radiation

Cleaning of PVC Sump at Pump House No. 07 of capacity 0.11 Lakh Gallon using following stages cleaning process including arrangement of necessary T&P, labour and Chemicals mechanize etc before starting process of cleaning complete all as specified and as directed. (a) Mechanized Dewatering (b) Sludge Removal (c) High Pressure Cleaning (d) Vaccum cleaning (e) Antibacterial spray (f) UV radiation

Cleaning of PVC overhead tank at ILP Location of capacity 0.11 Lakh Gallon using following stages cleaning process including arrangement of necessary T&P, labour and Chemicals mechanize etc before starting process of cleaning complete all as specified and as directed. (a) Mechanized Dewatering (b) Sludge Removal (c) High Pressure Cleaning (d) Vacuum cleaning (e) Antibacterial spray (f) UV radiation

Opening completely pressure filter & oxidation chamber of capacity upto 15000 GPH and taking out existing filter media (sand, gravells) stainers and nozzles, removing and depositing filter media to a distance not exceeding 50 m including necessary repair/welding to make the pressure filter vessels complete leak proof for improving the strength and finally reassembling the pressure filter including filling of new strainer, gravles & sand in existing position duly cleaned replacing worn out gasket and nut bolts and washers, complete all as specified and as directed. Note- Strainers, gravels shall be measured and paid seperatley under relevant items.

Material and labour for prepration of old painted steel/iron surfaces of pressure filter & oxidation chamber by scrapping and cleaning of External and internal surfaces and applying two coats of black bituminious anti corrosive paint internal surface suitable for drinking water and Navy blue paint on outer surface marking the date of cleaning on the body, complete all as specified and as directed.

Supply only PVC push type/threaded type strainer suitable for filteration plant ,complete all as specified and as directed.

Supply only special coarse sand passing through 3.125 x 1.56 mm mesh suitable for use in filteration plant ,complete all as specified and as directed.

Supply only special coarse sand passing through 1.6 x 3.2 mm mesh suitable for use in filteration plant, complete all as specified and as directed.

Supply only new washed, cleaned, dust free, gravel of grading 25 mm to 20 mm graded filter media suitable for use in filteration plant , complete all as specified and as directed.

Supply only new washed, cleaned, dust free, gravel of grading 20 mm to 12 mm graded filter media suitable for use in filteration plant , complete all as specified and as directed.

Supply only new washed, cleaned, dust free, gravel of grading 12 mm to 06 mm. graded filter media suitable for use in filteration plant , complete all as specified and as directed.

Supply only new washed, cleaned, dust free, gravel of grading 06 mm to 03 mm graded filter media suitable for use in filteration plant , complete all as specified and as directed.

Supply and fixing in layers mix of manganese dioxide (MnO2) and treated carbofil in lumps of size 20 mm to 15 mm containing 75% of manganese Dioxide and 25% KG carbofil suitable for use in filltration plant , complete all as specified and as directed.

Supply and fixing live catalytic media (green Sand) suitable for use in filltration plant, complete all as specified and as directed.

Supply and fixing in repair's Butter fly valve PN-1.6 , 150 mm dia use in filltration plant, complete all as specified and as directed.

Supply and fix in repair's 100 mm bore CI Sluice valve PN 1.6 with Spindle Iron (Heavy duty) Wheel head and both ends flanged and MS nut bolts and washers and pair of rubber/fiber gasket and fixed in position, complete all as specified and as directed.

Supply and fix in repair's 150 mm bore CI Sluice valve PN 1.6 with Spindle Iron (Heavy duty) Wheel head and both ends flanged and MS nut bolts and washers and pair of rubber/fiber gasket and fixed in position, complete all as specified and as directed.

Supply and fix in repair's reflux valve (non return valve IS -5312) CI suitable for 100 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with joint with rubber or fibre board gasket with required nos size of nuts, bolts and washers including connecting and testing , complete all as specifed and as directed.

Testing of Water Samples for Chemical analysis as mentioned below from Pump Houses viz PH No - 05 & PH no. 07 complete all as specified and as directed. Following tests perimeters are:- Ph Level, Chloride (CL), Total Harness as Ca CO₃, Iron as (Fe), Arsenic (AS), Total dissolved solids , Bacteria, Colour, Odour, Turbidity, Floride, Nitrate, E- Coliform, Manganese, Sulfide, Calcium, Cyanide, Lead, Zinc, TSS. Note for above Item (a) Sample of Water for the above media test are to collected in transparent container/Jar/bottle separately for each test against each pump houses. (Hygienically clean bottles). (b) Sample of water to be collected shall be forwarded to any NABL certified authorized Lab. Notes: (i) Testing of Raw water and Treated water in Each PH considered as One Job. (ii) Testing of Water for Raw Water & Filtererd Water for total 02 Pump Houses in three month Basis.

S&F Pressure gauge for blower as per existing fter taking out old unserviceable one, complete all as specified and as directed by Engineer-in-Charge.

S&F nylon tube ¼ “ dia for chlorine dozing system , complete all as specified and as directed by Engineer-in-Charge.

S&F NRV 8 mm dia (antisyphon valve) for chlorine dozing system, complete all as specified and as directed by Engineer-in-Charge.

Supply Raw Water Poly Aluminium Chloride Inorganic Soluble Polymer In Sealed Plastic Bag, Medium Basicity, Suitable For Water Treatment.(PACKED IN 25 Kg. PLASTIC BAGS) complete all as specified and directed by Engr-in Charge.

Supply, commissioning and testing cubical housing cabinet type, weather proof, outdoor type factory made LT Panel boad, totally enclosed, dust and vermin proof openable from front & back side, canopy headed, connected with suitable size MS angle iron frame, Overall dimension suitable to operate submersible pump, fabricated with CRCA sheet 3.15mm thick sheet incluing IP - 55 protection, installed on concrete base made of PCC (1:3:6) type C1 using 20mm graded aggregate,including self locking arragement. Panel board shall comprise of :- (a) Copper Busbar rating- 300 Amps- 04 Nos (b) Indication lamp for RYB - 01 Set (c) MCCB-200 Amp, 4 pole, 25KA fixed thermal and magnetic settig, 415 V, 50 Hz AC-01 No(incoming) (d) MCCB-100 Amp, 4 pole, 16KA fixed thermal and magnetic settig, 415 V, 50 Hz AC - 02 No (e) MCB-63 Amp, 4 pole, 16KA fixed thermal and magnetic settig, 415 V, 50 Hz AC - 01 No (f) Fully Automatic Star delta Starter MN Motor rating AC-3,Duty 415v, 50 Hz 3 Phase, 30 HP,Relay range of 22-33 A.- 02 Nos (f) Fully Automatic Star delta Starter MN Motor rating AC-3,Duty 415v, 50 Hz 3 Phase, 20 HP,Relay range of 20-30 A.- 03 Nos (g) Change over switch 100 Amps 4 pole - 01 Nos (j) S&F digital ampere meter 3 1/2 display incl CT having CTR 200/5-01 Nos (h) S & F digital voltmeter 0-500 V = 01 Nos

Supply, commissioning and testing cubical housing cabinet type, weather proof, outdoor type factory made LT Panel boad, totally enclosed, dust and vermin proof openable from front & back side, canopy headed, connected with suitable size MS angle iron frame, Overall dimension suitable to operate submersible pump, fabricated with CRCA sheet 3.15mm thick sheet incluing IP - 55 protection, installed on concrete base made of PCC (1:3:6) type C1 using 20mm graded aggregate,including self locking arragement. Panel board shall comprise of :- (a) Copper Busbar rating- 300 Amps- 04 Nos (b) Indication lamp for RYB - 01 Set (c) MCCB-200 Amp, 4 pole, 25KA fixed thermal and magnetic settig, 415 V, 50 Hz AC-01 No(incoming) (d) MCCB-100 Amp, 4 pole, 16KA fixed thermal and magnetic settig, 415 V, 50 Hz AC - 02 No (e) MCB-63 Amp, 4 pole, 16KA fixed thermal and magnetic settig, 415 V, 50 Hz AC - 01 No (f) Fully Automatic Star delta Starter MN Motor rating AC-3,Duty 415v, 50 Hz 3 Phase to 30 HP,Relay range of 22-33 A.- 02 Nos (g) Change over switch 100 Amps 4 pole - 01 Nos (j) S&F digital ampere meter 3 1/2 display incl CT having CTR 200/5-01 Nos (h) S & F digital voltmeter 0-500 V = 01 Nos

Taking up CI/DI water main (including all fitting) with spigot & socket ends and lead joints including burning out & recovering lead from pipe of 100 mm bore for relaying / rerouting of serviceable pipe after cleaning complete all as directed.

Relaying of DI/CI pipe 100 mm bore in trenches/ over the masonry pillars after cleaning thoroughly including fittings complete all as directed.

M&L DI pipe of 100 mm bore with spigot and socket end rubber gas cate joint(titon) centrifugally cast class k-7 conforming to IS 8329-2000 laid in trenches/ on surface/ over masonry pillar and connection to old or new position complete all as directed. Cost of joint included in the qoted rate

Taking up or down 80 mm bore steel tubing and connection including cleaning for relaying or removal to store from trenches/wall surfaces complete all as directed.

All as per Item No 30 above but bore of Pipe 50 mm.

All as per Item No 30 above but bore of Pipe 25 mm

All as per Item No 30 above but of Pipe 20 mm

Relaying/re-fixing old 80 mm bore GI tubing or in floor/pillar/wall in new or old position complete all as directed

All as per Item No 34 above but bore of Pipe 50 mm.

All as per Item No 34 above but bore of Pipe 25 mm.

All as per Item No 34 above but bore of Pipe 20 mm.

M&L 80 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection in old or news position including fitting like socket /Union/Tee/Reducer Nipple etc complete required will be supplied by Contractor rate for the same is included in the item rate quoted

All as per Item No 38 above but bore 50 mm

All as per Item No 38 above but bore 25 mm

All as per Item No 38 above but bore 20 mm

M&L DI bend any type, radius and angles, tappers and type (straight, bend, increasing, decreasing, or double socket etc. Tee pipes single branch Y junction, double branch cross (all socket, socket and Spigot or flanged ends) collors, caps and plugs for the Pipes socket and Spigot. All socket and flanged upto bore of 250 mm complete all as specified

M&L for 50 mm bore gate valve gum metal class-II screwed down high pressure with clutch handle screwed both ends for Iron pipe including taking out of old unserviceable gate valve complete all as directed.

All as per Item No 43 above but size 25 mm bore

All as per Item No 43 above but size 20 mm bore

Supply & fixing elecrtonic dosing pump of chemical dosing system with dosing pump/ injector with minimum pressure 6 Kg/Cm and minimum flow 20 ltr per hour complete all as specified and directed.

Lifting & Lowing of submersible pump of any type and capacity alongwith column pipe and 3 core flat cable complete after disconnecting of all elect and water line connection for the any make of pump & motor.Complete all as specified and directed.

Developing of tube well by means of air compressor, for number of hours, until sand free clear potable water is obtained including testing to get maximum yield and discharge complete all as specified and as directed. (Note : Above rate is inclusive of DHPP )

Supply and laying rubber insulating mat one side chequered size 2 mtr x 1 mtr x 20 mm and duly ISI mark.Complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches pillars etc.Complete all as specified and directed.

M & L Brick work built in CM 1:4 with sub class "B"old size bricks straight or curved on plan exceeding 6 m mean radius.Complete all as specified and directed.

M&L brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4.Complete all as specified and directed.

M&L 10mm thick rendering in cm (1:6) on other than fair faces of brick work finished even & smooth without using extra cement.Complete all as specified and directed.

S & F square wire mesh with green coating of any spacing complete all as specified and directed

M&L for preparation new surfaces of steel and iron surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

M & L for 75mm thick Plain Cement concrete 1:3:6 type C 2 using 40mm gradded aggregate as in bedding of foothpath.Complete all as specified and directed.

S & F Machine pressed precast concrete interlocking paver block gloosy fineshed laid over sand cushioning layer of 50 mm thick of any shape and design complete all as specified and directed. size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade. NOTE -(Sand cushioning layer will be measured and paid seperately )

Surface excavation n. exc. 30cm deep and avererging 15cm deep and getting out.Complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide & n exc 1.5 mtr deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and exc. 1.5m depth not exc 3.0m depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering & well ramming in layers n. exc 25 cm thick complete all as directed.

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed.

M&L for for sand cushioning layer 40m thick over sub base for fixing of interlocking tiles spread levelled to reqd level complete all as specified and directed.

M&L hard core of gauge n'exc 63 mm of broken boulder below Path. complete all as specified and as directed

M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.

M&L 100 mm bore GI tubing light grade for protection of cable including necessary joint including taking down old u/s one complete all as specified and as directed.

S&F steel water tubing 40 mm dia of bore light grade galvanised with all fittings laid in trenches / fixing with surface of wall after drawn through electric cable by means of nuts bolt and washers all as directed .

Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade cross sectional area 120 sq. mm 3½ Core including Brass Glands including dismantling old unserviceable cable complete all as directed by Engr-in-Charge.

Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade cross sectional area 95 sq. mm 3½ Core including Brass Glands including dismantling old unserviceable cable complete all as directed by Engr-in-Charge.

Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade cross sectional area 50 sq. mm 3½ Core including Brass Glands including dismantling old unserviceable cable complete all as directed by Engr-in-Charge.

Supply,laying in repair in trenches of XLPE UG cable insulated aluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 25 sqmm 4 core and testing complete all as specified and directed.

Supply,laying in repair in trenches of XLPE UG cable insulated aluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 16 sqmm 4 core and testing complete all as specified and directed.

Supply,laying in repair in trenches of XLPE UG cable insulated aluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 16 sqmm 2 core and testing complete all as specified and directed.

Supply,laying in repair in trenches of XLPE UG cable insulated aluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 10 sqmm 4 core and testing complete all as specified and directed.

Supply,laying in repair in trenches of XLPE UG cable insulated aluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 10 sqmm 2 core and testing complete all as specified and directed.

M & L for heat shrink type straight through jointing kit for 1.1 KV XLPE/PVC cables of size 6 to 16 Sqmm 4 core including testing after jointing complete all as specified & directed.

All as per Item No 76 above but 25 to 50 Sqmm 3.5 Core

All as per Item No 76 above but 70 to 120 Sqmm 3.5 Core

M&L for Boring/Drilling (Horizontally) manually/mechanically under existing road (Maximum 10 M in width) suitable for passing GI tubing of 40 to 150 mm bore complete all as specified and directed.

Material and labour for painting to steel tubular pole 8.5/9.0 metre long with two coats of synthetic enamel paint up to 1.20 metre height from ground level in 15 cm alternative black and yellow strips and remaining portion with aluminum paint and MS frames like channel, clamps, angle, D-clamps etc with two coats of aluminum paint complete all as specified.

Dismantling existing steel or cement poles/ struts, any size carefully including necessary excavation demolition of concrete etc. and removing the old unserviceable rubbish etc.complete all as specified and directed.

M & L for Steel tubular swaged poles complete with cast iron/MS base plate , finial taper plug , bolts , nuts & screws as specified type 410 SP-31 , 9.0 meter long including making hole of 2 inch dia at 2.5 meter from bottom and 1 inch at 8 meter from bottom complete all as specified & directed. (Note: PCC anti climbing device, cross arms insulator and earth work measure and paid separately)

M&L PCC (1:3:6) type C2 using 40mm graded aggregate as in foundation for stay set /Pole/ Panels etc including fair finish even and fir to exposed surfaces without using extra cement complete all as specified and as directed.

M & L PCC (1:2:4) type B-1 (with using 20 mm graded stone aggregate) as coping of pole/panel including necessary form work as required complete as directed

Supply and fixing in repair MCCB 4 pole , 415 V Fixed type 250 Amp, with breaking capacity 35 KA including spreader link and seperator and any modification required for fixing of MCCB including taking down old unserviceable one complete all as directed.

Supply and fixing in repair MCCB 4 pole , 415 V Fixed type 200 Amp, with breaking capacity 25 KA including spreader link and seperator and any modification required for fixing of MCCB including taking down old unserviceable one complete all as directed.

Supply and fixing in repair MCCB 4 pole , 415 V Fixed type 160 Amp, with breaking capacity 25 KA including spreader link and seperator and any modification required for fixing of MCCB including taking down old unserviceable one complete all as directed.

Supply and fixing in repair MCCB 4 pole , 415 V Fixed type 100 Amp, with breaking capacity 16 KA including spreader link and seperator and any modification required for fixing of MCCB including taking down old unserviceable one complete all as directed.

Supply and fixing in repair MCCB 4 pole , 415 V Fixed type 63 Amp, with breaking capacity 16 KA including spreader link and seperator and any modification required for fixing of MCCB including taking down old unserviceable one complete all as directed.

Supply and fixing in repair of MCB TPN 415 Volts, 63 Amps, 50 Hz, breaking capacity 10KA, C series all as specified and directed

Supply & Fixing HDPE DWC (Double Walled Corrugated) of Diameter 50 mm including disconnection and connection ofcable near panel/OH for pipe fixing including joints complete all as directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized iron strip of 32 mm x 6mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 40 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting (Inside cavity to be made in Pit for placing cover slab) made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR part 1 including testing on completion all as specified and directed incl demolition to existing.complete all as specified and directed.

Supply and fixing LED Street lights not less than 25 W with a single piece of pressure die cast aluminium housing and secondary optics and individual LEDs for a better light distribution and control with IP66 degree of protection and integrated driver with 10KV surge protection complete as per manufacturer's instructions including taking down old unsv light complete all as specified and as directed.

Supply and fixing LED Street lights not less than 60 W with a single piece of pressure die cast aluminium housing and secondary optics and individual LEDs for a better light distribution and control with IP66 degree of protection and integrated driver with 10KV surge protection complete as per manufacturer's instructions including taking down old unsv light complete all as specified and as directed.

Supply and fixing LED Street lights not less than 90 W with a single piece of pressure die cast aluminium housing and secondary optics and individual LEDs for a better light distribution and control with IP66 degree of protection and integrated driver with 10KV surge protection complete as per manufacturer's instructions including taking down old unsv light complete all as specified and as directed.

Supply and fixing of LED flood light fitting light not less than 70 watt with IP66 protection new generation energy saving very high efficiency,enviormental friendly ,long life with fixing accessories such as braket made out by GI strip ,nutts bolts and washer complete making all connection all as specified and directed including taking down old unsv light complete all as specified and as directed.

Supply and fixing of LED flood light fitting light not less than 120 watt with IP66 protection new generation energy saving very high efficiency,enviormental friendly ,long life with fixing accessories such as braket made out by GI strip ,nutts bolts and washer complete making all connection all as specified and directed including taking down old unsv light complete all as specified and as directed.

Supply and fixingof New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LED light 35 Watt made up of high grade unbreakable polycorbonate material including taking down old unsv light complete all as specified and as directed.

Supply and fixing LED not less than 8W, 5700 K, 0.6 M long LED bollard for pathways and gardens are made with aluminium extrusion for sturdiness and better finish, UV stabilized injuction moulded oval polycarbonate diffuser for spot-free lighting and IP 65 degree of protection with fixing accessories complete as per manufacturer's instructions including taking down old unsv light complete all as specified and as directed.

S&F in repair of Crown shaped gate/garden light in soothing opal finish made up of unbreakable Polycarbonate material, including 15 W LED Lamp (B-22 base) all as specified and directed.

S&F in repair 1100 Volts grade heavy duty cable PVC insulated standred twin core flat or circular aluminium conductor of size 2.5 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified and directed.

S&F in repair1100 Volts grade heavy duty cable PVC insulated standred twin core flat or circular aluminium conductor of size 4.0 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified and directed.

Supply and fixing in repair of loop in loop out junction box with SP 6-32 amp, IP 65 / IP 66 protection halogen free and weather proof of minimum size (130 x 180 x 77) mm, fixed to Pole with suitable clamp including nuts and bolts and washers incl provision of connector fixed to pole all as directed.

Supply and fixing in repair PVC medium grade conduit 20 mm dia for drawing cable between pole junction box and light fitting brakect including fixing clamp made of GI strips and nut and bolts (Minimum 3 clamp in each pole to be provided) complete all as specified and directed.

Supply and fixing in repair 1100 volts grade PVC insulated weather proof sheathed copper cable 1.5 sqmm size 3 core between pole junction box and light fitting complete all as specified and directed.

Supply & fixing in repair bracket of size 32 mm GI pipe for mounting street light at top of existing LT pole including Clamp, cutting, welding, reaming, finishing ,bending in appropriate size at existing location as directed . Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor's firm name while carrying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

GANAPATI TRADING

Flint India

D G Corporation