Preparation and Renovation of District Information Center office in Jilla Seva Sadan building (Second floor) Ta. & Dist. Chhotaudepur

No. Figure Amount

1 Supplying in position of officer table of square shape TABLE 1500MM x 1.00 No. 35855.00

Plywood with top laminated shhets Indian Teak 35 mm x 30 mm border

patti side and legs with 50 mm x 50 mm CRC powercoted pipe with all

necessary materials all exposed wooden/plywood member including sand

papering, making, edges round with necessary hardware such as ailen bolt,

sheet, metal screw, nail, gluing material, sliding chanels, fixtures, all

exposed wooden members shall be semi glossy PU polished including sand

papering and making edges smooth with necessary other fixtures and

fastenings etc.complete as per drawings approved by judiciary department

and instruction by Engineer in charge.

2 Supplying Computer Table (1200mm x 750mm x 750mm) to be made from 8.00 No. 12625.00

12mm thick Glass on top, 18mm Plywood ISI brand with decorative

Teakwood finish Vineer Top, side and front using, all necessary materials

all exposed wooden/plywood member including sand papering, making,

edges round with necessary hardware such as ailen bolt, sheet, metal

screw, nail, gluing material, sliding chanels, fixtures, all exposed wooden

members shall be semi glossy PU polished including sand papering and

making edges smooth with necessary other fixtures and fastenings

etc.complete as per drawings approved by judiciary department and

instruction by Engineer in charge.

3 Supplying High Back Revolving chair of over all size as mention below 1.00 No. 10605.00

made of 1.25 ERW pipe of size 16 gauge with seat & back made from

mm hot press ply & provided with PU mold of 40 density & covered with U

foam on covering best quality Upholstery/ Latheright using with etc comp. or

as directed.

4 Supplying Low Back Revolving Chair of over all size as mention below 8.00 No. 4848.00

made of 1.25 ERW pipe of 16 gauge with seat & back made from 12 mm

hot press ply & provided with PU mold of 40 density & covered with U foam

on covering best quality Upholstery/ Latheright using with etc comp. or as

5 Providing and supplying wooden Single sofa with using Indian teak wood 2.00 No. 18180.00

size in frame structure and 19mm thick W.P. plywood in box structure with

100mm thick high density "U" foam in seat portion and 50mm thick high

density "U" foam in back portion with 25mm thick high density "U" foam in

both seat and back portion with imported tapestry or leather covering on it

with S.S. legs with handle facilities with necessary other fixtures and

fastening including of polishing work etc. complete or as directed.

6 Providing and Arranging tea table made from 37mm x 37mm size Indian 1.00 No. 4545.00

teakwood leg and top frame made from 37mm x 75mm Indian teakwood

having 18mm thick Ply and 4mm thick Veneer with melamine polish and

0.8mm thick balancing laminate at bottom for shelf made with surrounding

Indian teakwood frame of size 37mm x 12mm. The top having 12mm thick

frosted glass with edge finish to be placed properly in groove made.

Surface to be finished with melamine polish including all materials and

labours etc. complete as per drawing and instruction of engineer-incharge.

Size 900mm x 600mm x 450mm

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

7 Providing and Arranging tea table made from 37mm x 37mm size Indian 1.00 No. 3535.00

teakwood leg and top frame made from 37mmx 75mm Indian teakwood

having 18mm thick Ply and 4mm thick Veneer with melamine polish and

0.8mm thick balancing laminate at bottom for shelf made with surrounding

Indian teakwood frame of size 37 mm x 12mm the top having 12mm thick

frosted glass with edge finish to be placed properly in groove made.

Surface to be finished with melamine polish Including all materials and

labours etc. complete as per drawing and instruction of engineer-incharge.

Size - 600mm x 450mm x 450mm

8 Supplying and placing S.S Nickle crome plated Dustbin having 10 inch dia 3.00 No. 2903.75

& 14 inch height with perforated S.S sheet including all necessary fixture,

directed by Engineer Incharge. Approved Make : Godrej/ Herman Miller/

Haworth/ Knoll

9 Supplying steel cupboard for File store of size 1200mm(W) x 486mm(D) x 1.00 No. 13938.00

1980mm(H) having shelf made of 0.7mm thick CRCA & 0.8mm thick high

yield strength CRCA for doors, with visible 5mm thick glass & back 0.9 mm

thick CRCA for all other components. Grade of CRCA would be ‘D’ grade

confirming to IS:513 having three way locking mechanism with shooting bolt

shelf with adjustable shelf mounting with uniformly distributed load capacity

as per shelf is 40 kg. maximum inclusive 4 nos. of adjustable full shelf &

box file A4 size (85mmW x 345mmH x 285mmD) can be stored vertically

on three shelves & clear space above fourth shelf is 240 mm with

necessary epoxy powder coating with 50 microns thickness including all

necessary fixture, fasteners, fittings, labour material machinery etc

Godrej / Herman Miller / Haworth / Knoll.

10 TV UNIT WITH DRAWER, BACKSIDE PANELLING & LUGGAGE RACK :- 1.00 No. 9595.00

19mm thick Plywood (M1) framing, platform, backside paneling & 3 Nos. of

drawers. Finishing 4 mm thick Veneer(M23) & Full-core Laminate (M24)

5mm thick fixed on platform for luggage keeping. Backside paneling to be

finished with approved decorative wall-paper, 4 mm thick Veneer(M23) &

laminate (M25) inside drawers. Drawers to be fixed with Telescopic roller

hannels (M15), handle (M19) etc. complete with beading patties and all

required hardware (M14). Backside Wall Paneling 40mm gap between wall

and panel for passing of TV cables. Polishing all exposed edges shall be

covered with 8mm thick Teak wood beading patti(M4). All exposed wooden

& veneer faces to be finished with matt finish melamine polish (M29).

Painting All remaining non-visible faces & edges shall be painted with

enamel (oil) paint of matching shade of other finished surfaces. Remarks

complete as per drawings and as / instruction

of Architect & Engineer-in-charge.

11 Providing and Supplying Impulse Blackout Roller Blinds with fabric of 36.00 Sq.m. 2222.00

0.53mm thickness and Top channel of non-rusting aluminium alloy with

1.25mm thickness and bottom channel of 1.50mm thickness & 21mm

diameter. Tilt channel of ABS plastic with 1.50mm polyster cord with

4.50mm balls with stop lock arrangement including all necessary fixture,

directed by Engineer Incharge. Approved Make: Marvell / Deck / Hunter-

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

12 Providing & fixing Wooden partition having height of 3.00 mt covering one 29.00 Sq.m. 8569.85

sides walls made out of Special Indian teakwood / ply in framing, top /

bottom border/edges, cupboard shutters frame etc. with BWP 9 mm thick

Century make plywood laminated with 4.0 mm thick Century make veneer

on both side of panelling with imported superior quality velvet fabric with

polishing in panelling, with Decorative Glass in shutters, decorative S.S.

handles and necessary superior quality hardware's viz sliding channels,

hinges including and of required size and in center of wall pannelling etc.

inclusive of necessary fixtures & fasteners etc. complete as per drawings

and designs supplied by the department and existing sample in the

instruction by department and Engineer in charge.

13 Supplying Wooden Wall Panelling having height of 3.00 Mt covering one 31.00 Sq.m. 6499.35

sides walls made out of Special Indian teakwood / ply in framing, top /

bottom border/edges, cupboard shutters frame etc. with BWP 9 mm thick

Approved ISI Brand make plywood laminated with 1.0 mm thick Approved

ISI Brand make laminate one side of panelling with imported superior

quality velvet fabric with polishing in panelling, with Decorative Glass in

shutters, decorative S.S. Handles and necessary superior quality

hardware's viz sliding channels, hinges including and of required size and in

center of wall panelling etc. inclusive of necessary fixtures & fasteners etc.

complete as per drawings and designs supplied by the department and

existing sample in the instruction by department and Engineer in Charge.

14 Providing and fixing single layer waterproof gypusm board 12.5 mm thick of 79.00 Sq.m. 606.95

the make Newgood Group Co. Ltd. or equivalent & Newgood Group Co.

Ltd. company sections using waterproof board of size 1220 mm x 1830 mm

x 8.0 mm suspended by G.I suspender of size 25 mm x 3 mm with

intermediate channel of size 18 mm x 40 mm x 0.80 mm at 1220 mm

center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at

mm center to center and perimetre channel A of size 20 mm x 27 mm x

mm x 0.50 mm at edges & drops including paper tap sand soffit cleat,

anchor fastener, scotch bolt connecting cleat joining compound top coat on

ceiling including making necessary opening for light fitting, diffuser etc.

complete as per detail drawing as directed.

15 Providing and applying Imported Decorative Wall paper of approved make 60.00 Sq.m. 2222.00

with making wall smooth and free from mortar and with fixing wall paper in

line and level using wall paper of approximate required design with

necessary adhesive materials etc complete as per instruction of site

16 Providing and fixing 35 mm thick single shutter flush door solid core 2.00 Sq.m. 5363.10

finished with both side 1 mm thick lamination both side of natural wood

grain shade as approved by and as per the instruction of engineer in charge

with necessary SS hinges and fixture etc. complete.

17 Supplying Imported S.S. Three Seaters Perforated benches with using S.S. 3.00 No. 12120.00

Perforated Sheet in Sheet and Back with S.S. Pipe In frame and support

with 25mm Cushion with black rexien on both sheet on back portion of the

bench with necessary other fixtures and fastening etc comp or as directed

by Engineer in charge.

18 Providing and Supplying of required size wall clock in court premises of 1.00 No. 2525.00

circular shape, clock shall be having dia not less than 0.60mt etc complete

and directed by Engineer in charge.

19 Applying two coats of acrylic lappy (putty) and two coats of primer of 61.00 Sq.m. 40.59

approved brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand papered smooth.

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

20 Wall painting (two coats) with plastic emulsion paint of approved brand and 61.00 Sq.m. 84.82

manufacture on undecorated wall surface to give an even shade including

throghly brushing the surface free from mortar droppings and other foreign

matter and sand prepared smooth.

21 Supplying Visitor's chair as per approved sample Chair under structure 10.00 No. 2222.00

made from 19mm x 16G CRC pipe, Upholstered by 2 inch x 40 density PU,

foam in back rest. Soft PU handle as per sample bottom. Made from 25 x

18 SWG or Oval pipe of suitable cross section as per sample duly powder

coated to 40 to 50 micron. The rate shall be consolidated for all above

items. The rate shall include the cost of all materials, fixtures, joineries &

labour to complete the work satisfactorily, as per instructions of Engineer in

22 Supplying steel cupboard for Book / File store of size 1200mm(W) x 1.00 No. 13635.00

486mm(D) x 1980mm(H) having shelf made of 0.7mm thick CRCA &

0.8mm thick high yield strength CRCA for doors, with visible 5mm thick

glass & back 0.9 mm thick CRCA for all other components. Grade of CRCA

would be ‘D’ grade confirming to IS:513 having three way locking

mechanism with shooting bolt shelf with adjustable shelf mounting with

uniformly distributed load capacity as per shelf is 40 kg. maximum inclusive

4 nos. of adjustable full shelf & box file A4 size (85mmW x 345mmH x

285mmD) can be stored vertically on three shelves & clear space above

fourth shelf is 240 mm. with necessary epoxy powder coating with

microns thickness including all necessary fixture, fasteners, fittings, labour

TOTAL Rs.

i.e. Rs. Ten Lacs, Sixty Seven Thousand, Three hundred Eleven and One paisa only

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ______________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is

a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate

of original item at the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Chhotaudepur (R & B) Sub Division, Chhotaudepur (R & B) Division, Chhotaudepur (R & B) Division,

Chhotaudepur Chhotaudepur Chhotaudepur