SPECIAL REPAIR/REPLACEMENT OF OLD INTERNAL LIGHT FITTINGS/FIXTURES WITH LED ENERGY SAVING FITTINGS AND CONNECTED WORKS AT NAD ALWAYE AND PROVISION OF MODULAR KITCHEN CABINET IN ARMAMENT HOUSE P-1 AND P-3 AT AYUDH VIHAR AT NAD ALWAYE

Amount

Supply and fix LED tube light fitting of 20 watt, Extruded aluminium housing enhances safety, high quality PC Diffuser, easy to install efficiency not less than 110 lumen/watt, THD <10% complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one complete all as specified and directed.

Supply and fix LED tube light fitting of 10 watt, Extruded aluminium housing enhances safety, high quality PC Diffuser, easy to install efficiency not less than 110 lumen/watt, THD <10% complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one complete all as specified and directed.

Supply and fix Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaries comprising of high brightness LEDs, 10 watt including taking down old one complete all as specified and directed.

Supply and fix Environmental friendly, long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 Protection and impact resistant of IK07 of 30 watt including taking down old one complete all as specified and directed.

Supply & Fix LED recess mounted down lighter 15Watt, 230V, with pressure die cast aluminum housing with heat sink and high quality PC Diffuser, efficiency of 110 Lumen/watt, THD <10, PF >0.95, with integral driver module, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one complete all as specified and directed.

Supply & Fix LED 2x2 feet fitting, 36Watt, 230V, with CRCA Powder coated housing and high quality PC Diffuser, efficiency of 120 Lumen/watt, THD <10, L70 B50, PF >0.95, with separate driver module, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one complete all as specified and directed.

Supply & Fix CIMFR Certified flameproof LED batten fitting suitable for twin T8 tube of 20 watt, Recommended for Gas/Vapor group of llA & IIB and one 1 & 2, IP65 protected including taking down old one complete all as specified and directed.

Supply and Fix CIMFR Certified flameproof LED batten fitting suitable for single T8 tube of 20 watt, Recommended for Gas/Vapor group of llA & IIB and one 1 & 2, IP65 Protected including taking down old one complete all as specified and directed.

Supply and Fix CIMFR Certified flameproof LED fitting 60 watt well glass in die cast aluminium housing heat resistant toughened glass, Recommended for Gas/Vapor group of llA & IIB and 1 & 2, IP65 Protected including taking down old one complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed.

Material & Labour for One tube light/Ceiling light/ 5 Amps socket point controlled by one switch with PVC single core unsheathed copper conductor multistranded cables FRLS 1.5 Sqmm size drawn through and including PVC conduit of suitable size concealed/on surfaces/ceilings etc and all accessories, fire resistant, ISI Marked including 2 mm thick 60mm depth GI sheet pressed terminal box (recessed) with 3mm thick laminated hylam sheet top cover including PVC single core unsheathed copper conductor multistranded cables FRLS 1.5 Sqmm as earth continuity conductor and making good the disturbed surfaces of walls/floors/ceiling etc complete all as specified and directed.

All as per Serial Item No 11, but using 2.5 Sqmm Cables for 15 Amps Socket.

Supply and fix Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.

Supply and fix Ceiling rose, 3 phase/PVC/polycarbonate, isolated body, 65 x 50mm, 3 terminals complete all as specified and directed.

Material and Labour for Kitchen Cupboards Below Counter top (Bottom Cabinet Approximate face Size of 8.20 x 0.85 metre, L shaped) using 18 mm Thick Marine Plywood of quality grade 710 with and including 1mm thick decorative lamination for both the sides of shutter, outside box, Inside Divisions, Shelves and Skirting, including framing tubes Hettich hardware such as Hinges, channels, handle, Soft close Hinges and Channels for cupboards & shelves etc, complete all as specified and as directed by Engineer in Charge. Note: - Kitchen Accessories will be measured and paid separately. Decorative lamination and its colour shall be approved by Engineer in Charge before incorporation in the work.

All as per Serial Item No 15, but Top Counter box type in Wall mounted Unit (Approximate Size of 6.00 x 0.65x 0.75 metre) with complete fittings & fixtures.

Material and Labour for Tall Unit Cupboards in Store Room (Approximate Size of 1.20 x 2.1 x 0.75 metre) using 18 mm Thick Marine Plywood of quality grade 710 with and including 1mm thick decorative lamination for both the sides of shutter, outside box, Inside Divisions, Shelves and Skirting, including framing tubes Hettich hardware such as Hinges, channels, handle, Soft close Hinges and Channels for cupboards & shelves etc, complete all as specified and as directed by Engineer in Charge. Note: - Kitchen Accessories will be measured and paid separately. Decorative lamination and its colour shall be approved by Engineer in Charge before incorporation in the work.

Material & Labour for provision of Breakfast counter using 36mm thickness Table top with marine plywood with and including Lamination fixed with necessary pastes, screws accessories etc complete all as specified and as directed by Engineer in Charge.

Supply & Fixing Nano white G-7 counter top marble fixed with necessary pastes, screws accessories etc complete all as specified and as directed by Engineer in Charge.

Supply and fix following kitchen accessories of brand Hettich/Ebco 1. Cutlery Tray – 1 No. 2. Cup and Saucer Basket – 1 No. 3. Thali Basket – 1 No. 4. Detergent Holder – 1 No. 5. Waste Bin Holder – 1 No. 6. Glass Tray Plate Tray and Dip Tray – 1 No. 7. Bottle Pullout – 1 No. 8. Plain Basket – 1 No.

Supply & Fix 90 CM Chimney with exhaust pipe along with complete accessories all as directed by Engineer In Charge. Make shall be Faber alpha HC PB BK90 Or Equivalent make as approved by GE.

Supply & Fix 90 CM Hob in Chimney with exhaust pipe with complete accessories complete accessories all as directed by Engineer In Charge. Make shall be as per Faber Maxus HT 783 CRS BR CI AI Or Equivalent make as approved by GE.

Supply & Fix in Stainless Steel 1mm thick kitchen Sink AISI 304 grade of size overall size 1040x510, bowl size 510x405mm and depth of bowl 250mm with drain board with corrosion resistance etc including complete accessories including couplers, waste outlet pipe etc, complete all as specified and as directed by Engineer in Charge. Make shall be as per Blue star BSSBSD-63 or Equivalent make approved by GE. Note for Item No 15 to 23:- 1. All the works under item No 15 to 23 shall be executed through D2R interiors home /Godrej/ Sleek (Asian) or other standard Modular Kitchen firm as approved GE. 2. Necessary warrantee /guarantee certificates for the same shall be obtained from Manufactures/Firm and shall be submitted to AGE after completion of work.

Supply & Fix in repair 15mm bore swan neck type Sink tap Fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

Material & Labour for forming jambs, with Cement mortar 1:4 to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed by Engineer in Charge.

Supply & Fix Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in- charge.

Supply & Fix in Powder coated aluminium 1mm thick Three track frame (area not exceeding 1.6 Sqm in each panel) with (minimum thickness of powder coating 50 micron) sliding type shutters (2 Nos Glassed windows & 1 No aluminium wire mesh shutter ) including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc, aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws all complete as specified and as directions of Engineer-in-charge.

Supply & Fix Powder coated aluminium 1mm thick ventilator with fixed type area of each panel not exceeding 0.4 Sqm plain glazing with necessary frame and shutter complete all as specified and the directions of Engineer-in-charge.

Supply & Fixing to External gas pipes having four sets of two turns consisting of a bend and an elbow with complete accessories along with corrosion preventive and as per External gas connection standard up to 6 metre gas pipe length with valve complete all as specified and as directed by Engineer in Charge.

Dismantling of floor hearth and wall tilling including mortar bedding removing serviceable tiles to store and rubbish off the premises complete all as directed by the Engineer-in-Charge

Material & Labour for 10 mm thick Vitrified tiles (light shade) (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in cement mortar 1:6 and pointed with epoxy grouted with suitable pigment (mixed with white cement) to match the colour of tiles complete all as specified and directed.

Material & Labour for Glazed ceramic tiles, coloured (light colour as approved), of size 300x600x7mm/ 450x350x7mm thick on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

Supply & Fix in repair to CP 15mm bore Stop valves, Fancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer in Charge.

Supply & Fix in repair ( including taking down existing) 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings to fittings in trenches/walls/ceiling concealed in wall area and making necessary holes and filling Gaps with PCC works , with all necessary fittings complete all as specified and directed.

Taking down cement plastering any description on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc complete as specified by the manufacturer and as per directions of Engineer- in-charge

Material & Labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge.

Demolition of Reinforced cement concrete of any description as in coping ,chimney walls etc over compound wall complete all as specified and as directed by Engineer in Charge

Material & Labour for interior plastic painting with two coats of emulsion of approved manufacturer shade and colour over a coat of primer over well finished 3mm thick wall care putty on newly plastered surface wall as per manufacturer's specification complete all as specified.

Material & Labour for complete removal of existing painted on wall surfaces for interior plastic painting with two coats of emulsion of approved manufacturer shade and colour over a coat of primer over well finished 3mm thick wall care putty on newly plastered surface wall as per manufacturer's specification complete all as specified.

Taking down & Refixing door (Area not exeeding 2 Sqm each) with replacement of decorative laminate sheet complete all as specified and as directed by Engineer in Charge

Supply & Fixing 6mm thick Light coloured Hollow PVC moulded False Ceiling with all supporting aluminium frames with brackets, screws, beadings, channels etc including necessary hanger complete all as directed by Engineer In charge.

Amount of Credit Schedule shall be deducted to arrive the Contract Sum.

M/s S & S Enterprises/ Suresh Shivasankarapillai

KENZ CONSTRUCTIONS