Construction of building at Govt. Polytechnical college at Talwar in Tehsil Jaisinghpur Distt. Kangra (HP)

Amount

Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) up to any heights / depths or any quantum of water including slush which may arise during de-watering, removal of slush and stacking the serviceable and un-serviceable material clear from the edges of excavation and then returning the stacked soil in 15cm (fifteen centimeter) layers where required into plinth and side of foundation etcetera, consolidating each deposited layer by ramming & watering and then disposing of all surplus un-serviceable excavated earth as directed within all leads and lifts, by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and disposed of material to be neatly dressed and leveled as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Excavation in drains and channels etcetra in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturator soil including chiseling or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm layer when required into plinths sides of foundations etc. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- Incharge .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Foundation, footings basis of columns etcetera and mass concrete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetera upto any thickness as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits excluding landing, as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera with wooden battens and ballies heights of propping and centring in all height/depth below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like floor etcetera as per H.P.P.W.D specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls up to all width and heights as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement is to four sand is to eight graded crushed stone aggregate 40 mm (forty millimeter) nominal size) and curing complete excluding the cost of form work in foundation and plinth as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Stone filling with hard stone of approved quality dry hand packed tightly under floor. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty newton per square millimeter) with cement contents not less than 330 kgs (three hundred thirty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in Foundation footings, bases of columns and the like and mass concrete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 ( M-twenty) design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty newton per square millimeter) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor ,roofs , landings , shelves and their supports balconies, beams ,girders , bressumers and cantilevers up to all floor level as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-25 (M- Twenty five) design mix to obtained the minimum compressive strength of 25N /mm2 (Twenty five Newton per square millimeter) with cement contents not less than 360 kgs (three hundred sixty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns ,pillars, post, struts and the like and mass concrete up to all floor level, as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 ( M-twenty) design mix to obtained the minimum Compressive strength of 20N /mm2 (Twenty Newton per square millimeter) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in stair case (except spiral stair cases) including landings etcetera up to floor all levels as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/ mm2 (Twenty newton per square millimetres) with cement contents not less than of 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in walls any thickness but not less than 0.10 (Zero decimal ten) metres thickness including attached pillasters buttresses, plinth and string courses etcetera top of foundation upto all floor level as per H.P.P.W.D specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing Tor steel reinforcement of TATA / TISCO/SAIL for RCC work including bending, binding and placing in position complete up to all floor levels with cost of binding wire including carriage of material within all leads, lifts and other incidental and as per the direction of the Engineer-In-Charge .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying Damp Proof Course with 100mm (one hundred millimeters) thick cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate 12.5mm (Twelve decimal five millimeters nominal size) and curing complete, as required at site as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100 (Eighty/Hundred)/VG-10 using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre On Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Half brick masonry using second class common brunt clay building bricks in super structure above plinth level to floor all levels in cement mortar 1:4 (one cement is to four sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Second class brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:6 (one cement is to six sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Second class brick work using common burnt clay building bricks in super structure in cement mortar 1:6 (one cement is to six sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing angle iron door , windows, clerestory window frame (Single rebate) manufactured from M.S. angle iron section of 40x40x5mm(forty into forty into five millimetre) and M.S flat 50x4mm ( Fifty into four millimetre) in combination as per drawing and design including hinges jamb, lock jamb, beed and if required angle threshold of mild steel angle 50x25 mm (Fifty into twenty five millimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel but hinges 2.5 mm (Two decimal five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing angle iron door , windows, clerestory window frame (double rebate) manufactured from M.S. angle iron section of 40x40x5mm(forty into forty into five millimetre) and M.S flat 50x4mm ( Fifty into four millimetre) in combination as per drawing and design including hinges jamb, lock jamb, beed and if required angle threshold of mild steel angle 50x25 mm (Fifty into twenty five millimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel but hinges 2.5 mm (Two decimal five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S. channels frames 75x40x5mm (Seventy five into Forty into five millimeter) door/ windows/ ventilator frame and M.S. flat 75x5mm (Seventy five into Five millimeter) combination welded together to make a one frame as per design, drawing including hinges, jambs, beads if required, threshold of M.S. angles 50x25 (fifty into twenty five millimeter) welders rigidity fixed by mechanical means, hinges with split end tails to each jambs with a provision of locking arrangements, shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of surfaces as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing factory made PVC door frame single rebate of any colour of size 50x47mm with a wall thickness of 5mm made out of extruded 5 mm rigid PVC foam sheet heat bend and mitred at corners as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing to existing door frames 30mm thick factory made of PVC panelled door shutters consisting of frame made out of (Mild Steel) tube of 19 gauge thickness of size 19mmx19mm for style and 15mmx15mm (Mild Steel) square tube for top, bottom & Lock rail (Mild Steel) frame shall have a coat of steel primer and covered with 5mm thick PVC solid sheet heat moulded "C" channel of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tappered in 45 degree angle on either side forming style and 5mm thick 95 mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail, and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered on both side o to form lock rail top bottom and lock rail shall be provided either side of the panel 10 mm thick 20mm wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both side PVC sheet to be fitted in the M.S. Frame welded / sealed to the style and rails joints mitred and jointed with solvent cement adhesive i/c fixing of PVC shutter with existing frame with M.S. butt hingess 100x50x190 mm size with necessary screws etcetra complete as per specification, approved drawing , design or as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 40 mm thick second class Deodar wood paneled glazed or paneled and glazed shutters for door, windows and clerestory windows including black enameled iron butt hinges with necessary screws as per specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 40 mm thick second class Deodar wood glazed shutters for door, windows and clerestory windows including black enameled iron butt hinges with necessary screws as per specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 40 mm (Forty millimetre) thick second class Deodar wood wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85G with wire of dia 0.56 mm (Zero decimal five six millimetre) for doors, windows and clear story windows including bright finished black enameled iron hings with necessary screws as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S.( Mild Steel) plain grills of required pattern in window frames etcetera with M.S.Flats,20x5mm ( twenty into five millimeter) and 8 x 8 mm ( eight into eight millimeter) solid square or round bars, fixing to frames with round headed bolts and nuts or by screws or welding as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimeter) thick commercial board water proof board of Uniply / Green ply/century ply/ Kitply / Duro ply / Marino of IS marked for cup board box including shutters & shelves. Back side of cup board shall have 6/8 mm thick water proof ply. All the exposed portion of board shall have 6 mm thick hard wood edgenig. The shutter from outer side shall be finished with 1mm thick mica lamination of Century / Green ply/ Action Tesa of approved shade including hinges, handle,knob megnatic catcher complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing cup board shutter megnatic catcher with necessary screws complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 65x35mm (Sixty five into Thirty five millimeter) special quality bright finished brass cup-board locks or ward robe lock, with six levers including necessary screws etcetera complete (Indian make of approved quality) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimeters) dia stainless steel curtain rod with brackets, plugs etcetera complete as per H.P.P.W.D specification, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing anodized aluminum sliding door bolt anodized transparent or dyed to required colour and shade with bolts nuts and screws etcetera complete 300 X 16 mm (three hundred into sixteen millimeter) size as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

250 X 10 mm (two hundred fifty into ten millimeter) size

150 X 10 mm (one hundred fifty into ten millimeter) size

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

125 mm (one hundred twenty five millimeter) size

100 mm (one hundred millimeter) size

Providing and fixing aluminium anodized transparent or dyed to required shade and colour hooks and eyes with necessary screws etcetera complete 250 mm (two hundred fifty millimeter) size as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminium oxidised Hydraulic door closer with necessary screws etcetera complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etcetra to suit shutter thickness complete as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying 25mm (Twenty millimetres) thick Kota Stone flooring 55x55cm (Fifty five into Fifty five centimetres)(Mirror polished) on 20mm (twenty millimetres average thikness) base of cement mortar 1:4(One cement: Four sand) laid over and jointed with Grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as per specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying Kota stone slab 25 mm thick in risers of steps, treads , skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:4 (1 cement :4 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete as per specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying(300*600) mm (Thirty into sixty millimeter) ceremic glazed tiles non slippery of Kajaria/Nitco/Orient/Bell in dado upto 2.05 cm high laid on a bed of 12mm thick cement mortar 1:3 finished with flush pointing in white cement slurry mixed with pigment to match shade of tile including rubbing/nousing/moulding and polishing complete as per specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government..

40mm (Forty millimetres) thick cement concrete flooring 1:2:4(One cement: Two sand : Four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size) laid in one layer finished with a floating coat of neat cement as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government..

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco/ Kajaria/orient/bell/johnson or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government..

Providing and laying Duro stone vetrified tiles (600x600mmx10mm) in grey/coloured Nitco/ Kajaria/orient/bell/johnson or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying Duro stone vetrified tiles (300x300mmx10mm) of Nitco/ Kajaria/orient/bell/johnson or of approved shade in skirting, riser of steps and dados on cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying 25 mm (twenty five millimetre) thick Granite work top of kitchen laid over 20mm (twenty millimetre) thick base in cement mortar 1:3(1cement:3sand) with an admixure of pigment to match the shade of the granite stone slab complete as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimetres) wide and 4mm (Four millimetres) thick glass strips in joints of cement concrete flooring as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing staircase railing having wodden hand rail 75x65mm and baluster 19x19mm and 12x12mm in combination of M.S. solid square bar with clear height of 85cm at the rate of 60 cm centre to centre and to be embeded in cement concrete step and vertical blassters, welded/ jointed with M.S.flat of 40x6 mm (fourty into six millimeter) below wodden hand rail complete with applying a coat of red lead paint complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing of 50 mm dia (fifty millimeter) M.S. hollow pipe balcony railing upto 90 cm in height or as per architect drawing, design welded with 25mm dia M.S. baluster embedded in cement concrete 30cm c/c and jointed with electrical gas welding at top alongwith M.S. hollow pipe and 2 Nos. M.S. Flat of 50x5mm as per approved drawing , design or as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing factory made ridges or hips 60 cm (Sixty centimetres) over all having proper Gola shape with 0.60mm (Zero decimal Six zero millimetres) thick prepainted steel sheet roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating of Tata durashine/ Sail/ Reliance/ Jindals steel including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing valleys 90cm (Ninety centimetres) over all with 0.60mm (Zero decimal Six zero millimetres) thick pre-painted steel sheet of Tata / Shakti in valleys with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (twenty) microns over 5 (Five) microns primer coating to back coat back coat of polyester of 5 (Five) microrns over 5 (Five) microns primer coating of Tata durashine/ Sail/ Reliance/ Jindals steel including fixing with pre-painted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diametres with pre-painted G.I. limpet and bitumen washers complete as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing prepainted steel sheet roofing of Tata/ Dura shine/Reliance/ Jindal over steel trusses of 0.60 mm thickness (ISI marked Z-120) over steel truss prepainted galvanized steel and hot diffed metallic zinc coat sheet with top coat of regular modified polystar (RMP) organic coating of 20 micron over 5 (FWE) micron and back coating of polystar 5 (fwe) micron over 5 (fwe) micron primer coating including fixing with prepainted iron jrw hooks, bolts , nuts 6 mm (six millimeter) dia with prepained limpat and rubber washers complete with all accessories as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 30cm. (Thirty centimeter) wide 25cm.(Twenty five centimeter) deep plain P.G.I. Sheet of Tata / Sail 0.60mm (Zero decimal six zero millimeter) thick gutter fixed with bolts nuts and washers etcetra having dome shape grating and making necessary connections with rain water pipe complete as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S. ( Mild Steel) B.P. sheet 2.00 mm (two millimeter) thick in eaves boards/facia/soffits /ceiling including cutting, fixing, jointing with gas/electric welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured and laid for separately) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing flushing 38cm overall with 0.60mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating plus back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 150mm (oneHundred fifty millimetre) diameter on wall face P.V.C. (D-plast) rain water pipes 2.2mm ( Two decimal Two millimeter) thick of supreme/Finolex/Prince/ Relpipe/Reliance having working pressure not less than 4/6 kgs /cm2 (Four /Six kilogram) per square centimeter including filling the joints with approved adhesive complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing on wall face P.V.C. accessories for rain water pipes 2.2mm ( Two decimal Two millimeter) thick of supreme/Finolex/Prince/ Relpipe/Reliance having working pressure not less than 4/6 kgs /cm2 (Four /Six kilogram) per square centimeter including filling the joints with approved adhesive complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

150mm Plain bend

150mm Shoe

Providing and fixing 150 mm dia PVC clamps for PVC pipes fitting with steel screws and rawls plugs etctera complete. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 600x600x15mm aluminium composite panel ceiling with prepainted GI channel framing @ 600mm c/c (centre to centre) complete. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Steel work of TATA/TISCO/SAIL welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint in beams, joist, channels, angle, tee, flat with connecting plates or angle, cleats as in main and beams, hip and jack rafter fixing in rafter, purlin connects to common rafter in trusses complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint of Asian/ Nerolac brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters with enamel paint of approval shade as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matters sand papering and knotting as required with ready mixed paint of Asian / Nerolac brushing steel primer as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matters sand papering and knotting as required with ready mixed paint of Asian / Nerolac brushing wood primer as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Painting two coats(excluding priming coat) on new wood and wood based surface with ready mixed enamel paint of Asian / Nerolac brushing to give an even shade including cleaning the surface of dirt, dust and other foreign matters sand papering and Knotting with enamel paint other than white complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

6mm (Six millimeter) thick cement plasters in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

15 mm (Fifteen millimeter) thick cement plaster in single coat on rough side of brick/concretes/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth with cement mortar 1:6 (One cement is to six sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

15 mm (Fifteen millimeter) thick cement plaster in single coat on fair side of brick/concretes/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth with cement mortar 1:6 (1 cement : 6 sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

15 mm (Fifteen millimeter) thick cement plaster in single coat on fair side of brick/concretes/ stone walls for exterior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth with cement mortar 1:5 (1 cement : 5 sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Applying Birla / JK white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropping, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface complete. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved brand Apex ultima / Asian Paint/ Nerolac/ Berger paint on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

White washing with lime (Two or more coats) on undecorated wall surfaces, ceiling or sloping surfaces to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar droppings and other foreign matter as per H.P.P.W.D specification, approved drawing , design or as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Distempering (two coats) with acrylic/ synthetic /washable distemper of Asian/Nerolac of approved shade manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing plinth protection with 40mm (forty millimeter) thick interlocking paver blocks of NTC with 23 cm dia half round pipe for drainage purpose fixed over cement concrete 1:4:8 bedding of pipe as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying 60mm thick inter locking blocks heavy duty precast cement conrete inter locking paver blocks of NTC vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10(One cement: five sand: ten graded crushed stone aggregate 40mm (Forty millimeters) nominal; size for bedding for 150 mm (one hundred fifty millimeter) diameter P.V.C. pipe including necessary form work and curing complete, as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying 150mm (one hundred fifty millimetre) diametre PVC Pipe (to level or slopes) and jointing with adhesive of approved brand PVC pipes grade 'A' of Supreme / finolex / Prince the following internal diameters including testing of pipes and joints complete: including carriage of material within all leads, lifts and other incidental and as per the direction of the Engineer-In-Charge .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 20mm nominal dia to wall ceiling and floor galvanised mild steel tube ( medium grade ) including all tube fittings such as nipples, elbow, unions, tees and clamp i/c making good the walls ceiling and floor as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 1.00 HP (one Horse power) Tullu pump including board and fittings complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing polythene aluminum polythene (P.E.) A.E P.E composite pressure pipe U.V. stabilized with carbon block confirming to I.S. 15450-2004 Flow guard/ Kitec for water supply including clamps at one metre spacing, cutting, fixing and making good the walls etcetera; but excluding the cost of fittings (Internal work) pipes exposed on wall including filling the joints with approved adhesive complete and entire carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

1620 (20 mm O.D.) pipe

2025 (25 mm O.D.) pipe

Making connection of glavanised mild steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipe complete and entire carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes of Supreme / Finolex / Prince ISI marked including fixing with approved adhesive etc. complete. within all leads, lifts and other incidentals as per approved specifications drawing, design and as directed by the Engineer- in-charge.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110mm nominal bore/diameter.

75mm nominal bore/diameter

Providing and fixing PVC clamps ISI marked of approved design fixed with steel screws and rawal plugs etcetra complete within all leads, lifts and other incidentals as per approved specifications drawing, design and as directed by the Engineer- in-charge.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110mm nominal bore/diameter.

75mm nominal bore/diameter

Providing and fixing PVC heal rest Supreme/ prince/ Finolex including fitting the joints with approved adhesive mixure complete The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. .

110mm nominal bore/diameters.

75mm nominal bore/diameters

Providing and fixing P.V.C accessories Supreme/ prince/ Finolex for Sewerage pipe conforming to IS No. 14735-99 P.V.C. Plain bend includingcarriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110mm nominal bore/diameter.

75mm nominal bore/diameter

Providing and fixing P.V.C. collar of Supreme/prince/ Finolex including fixing with approved adhesive etcetra complete. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110mm nominal bore/diameter

75mm nominal bore/diameter

Providing and fixing P.V.C. cowl of Supreme/ prince/ Finolex including fixing with approved adhesive etcetra complete The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110mm nominal bore/diameter

75mm nominal bore/diameter

Providing and fixing 110x90mm (One hundred ten into nenety millimeter) nominal size/diameter P.V.C. floor trap of Supreme/ prince/ Finolex ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etcetra complete including within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 110x75mm (One hundred ten into seventy five millimeter) nominal size/diameter P.V.C. floor trap of Supreme/ prince/ Finolex ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etcetra complete including within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing European sheet No 20012 of Cera / Hindware /Jaquar vitreous china water closet (European type with integral P or S trap including jointing the trap with soil pipe in cement motar of approved adhesive (sheet cover and jet spray to be measured and paid for separately) as per approved specification and entire satisfaction of Engineer in charge. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing polyethylene / poly propylene 10.00 litres capacity (Dual flush) European standard control low level flushing cistern (sleek plus) of cera/Hindware/ESS ESS/Jaquar of star white/ snow white with fittingswith a pair of brackets such as lead valve,syphon 15mm nominal size PVC, ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipes 40mm dia C.P flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet as per approved specification and entire satisfaction of Engineer in charge. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing G.I intel connection for flush pipe with W.C Pan as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing plastic seat (Solid type) and cover of CERA/ Hindware/Jaquar for wash down water closet with C.P. brass hinges and rubber buffers solid type ( white plastic seat and cover) complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing ISI mark No 10008 of CERA/ Hindware/Jaquar or equivalent flat back 550x400mm (Five hundred fifty into four hundred millimetres) vitreous china wash basin white shade with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings as as per specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing stainless steel kitchen sink of Diamond / Unik/ Prayag big size having size 610x510x200 mm (six hundred ten into five hundred ten into two hundred) of AMC / UNIK/ Diamond of ISI marked with drain board and C.P. waste and C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm nominal size diameter rubber plug for wash basin (Heavy duty ). The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm nominal bore PVC connection pipe with brass union 45cm length, with necessary fittings. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing Mixer for kitchen sink of Jal/ Jaquar/ ESS ESS with casted swinging spout at top as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diameters PVC waste pipe of Hindware for wash basin or sink including brass check nut complete, as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing two hole basin mixing Faucet of Jal/ Jaquar/ ESS ESS as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 100mm diametres C.P. Grating of Jal/Jaquar /ESS-ESS (Heavy duty makes ISI marked ) for gully / floor or Nahni trap including fitting in all respect The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing flat back 600x450mm beveled edge mirror or superior glass of Atul/Modi Gaurd mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washers etcetra complete. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing C.P.(chromium plated) brass towel rail having size 600x20 mm of Jal/Jaquar/ ESS ESS / cera/ hindware complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws etcetra complete. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing plastic liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing charomium plated soap dish of Jal / Jaquar/ ESS ESS with C.P. brass brackets fixed to wooden cleats with C.P. Brass screws.as per specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing C.P. Brass Toilet paper holder of Jal/Jaquar / Kingston/Pasko/Sieko/ ESS ESS (Heavy duty make ISI including fitting complete in all respect) The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing chromium plated jet spray of ISI Marked IS No. 8934 of Jal / Jaquar/Cera/ Hindware of approved quality and colour with 1.5 metre tube as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm dia (fifteen millimetres) diametres C.P. (chromium plated) brass ISI Marked IS No. 8934 of Jal / Jaquar/Cera/ Hindware bib tap (superior or heavy type) with capstan head as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing C.P. Brass stop cock (heavy duty) Jal/ Jaquar/Cera/ Hindson / Ruby or equivalent 15mm ( fifteen millimetre) diametre as per specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm dia C.P. brass pillar tap with capstan head of Jal/Jaquar / ESS ESS/ Cera/ Hindson / Ruby with fitting complete in all respect .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm diameter brass angle valve of Jal/Jaquar/ESS ESS/ Cera/ Hindson/ Ruby with nuts as per approved specifications drawing ,design and as directed by the Engineer-Incharge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm diameter brass full way valve with wheel of Jal/Jaquar/ESS ESS with necessary fitting including entire carriage of material with in all leads and lifts and other incidentals.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm nominal bore brass valve (Horizontal plunger) type of Jal/Jaquar/ESS ESS/ Hindware/Hindson high pressure with copper plate with necessary fitting including entire carriage of material with in all leads , lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm diameters P.V.C. waste pipe Supreme/finolex/prince waste pipe for wash basin or sink including brass check nut The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing PVC single equal branch with oval access door, of Supreme/ Finolex/ Prince and insertion rubber washer 3mm (three millimetre) thick with bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

150 mm (one hundred fifty millimetres) nominal bore/diametre

110 mm (One hundred ten millimetres) nominal bore/diametre

Providing and fixing PVC double equal branch with oval access door, of Supreme/ Finolex/ Prince and insertion rubber washer 3mm (three millimetre) thick with bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

150 mm (one hundred fifty millimetres) nominal bore/diametre

110 mm (One hundred ten millimetres) nominal bore/diametre

Providing and fixing PVC plain bend ISI marked of Supreme / Finolex/ Prince including fixing with approved adhesive etc. complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

150 mm (one hundred fifty millimetres) nominal bore/diametre

110 mm (One hundred ten millimetres) nominal bore/diametre

Providing and fixing PVC door bend with oval access door of Finolex/ Prince/ Supreme, insertion rubber washer 3mm (three millimetres) thick bolts and nuts ISI marked complete including fixing the joints with approved adhesive mixure complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

150 mm (One hundred fifty millimetres) nominal bore/diametre size

110 mm (One hundred ten millimetres) nominal bore/diametre size

Providing and fixing PVC offset 45 degree of Supreme/ Finolex/ Prince ISI marked including fixing with approved adhesive etc. complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

150 mm (One hundred fifty millimetres) nominal bore/diametre size

110 mm (One hundred ten millimetres) nominal bore/diametre size

Providing and fixing PVC water Storage tank Sintex / Supreme/ Finolex tripple layer 1000 litres net capacity ISI marked with G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto any height above ground level including carriage of material with in all leads , lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (1 Cement : 4 Sand : 8 graded stone aggregate 40mm nominal size ) bedding for stoneware pipes of the 150mm internal diameters, necessary form work and curing complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6(1 Cement : 3 Sand : 6 graded stone aggregate 40mm nominal size ) in haunching of PVC 150mm internal diameters pipes of the following internal diameters, including concrete for beddings necessaryform work and curing complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing vitreous china pedestal of Cera / Hindware/Jaquar for wash basin complete recessed at the back for the receiption of pipe and fittings. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 100mm diametres C.P. stainless steel iron Grating of Jal/Jaquar /ESS-ESS (Heavy duty makes ISI marked ) for gully / floor or Nahni trap including fitting in all respect The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 600x120mm glass shelf (Heavy duty makes ISI marked IS No. 8931 & 8934) with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws etcetra complete. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing Tooth brush and Tumbler holder (Vitreous China) The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4(1 cement: 2 sand: 4 graded crushed stone aggregate 20mm nominal size) foundation concrete 1:4:8(1 cement: 4 sand: 8 graded crushed/broken stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1 Cement: 3 sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(1 cement: 2 sand: 4 graded crushed stone aggregate 20mm nominal size) finished smooth complete including curing and testing inside size 800x800x500mm deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm internal dimensions.Ttotal weight of cover and frame to be not less than 38 Kg Weight of cover 23Kg and weight of frame 15 Kgs with 300mm thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (1 cement: 3 sand). The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Construction manhole with R.C.C. (Reinforced cement concrete) top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size mix foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm (Forty millimetres) nominal size inside plastering 15mm ( Fifteen millimetres) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size mix finished smooth complete including curing and testing inside size 800x800x1000mm (Eight hundred into Eight hundred into one thousand millimetres) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred and ten millimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 200mm (Two hundred millimetres) thick walls of brick masonry using common burnt clay building brick in cement mortar 1:3 (one cement: three sand) as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Construction of brick masonary chamber for underground C.I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (1 cement : 5 sand ) C.I. Cover with frame (light duty ) 455mm x 610mm internal dimensions total weight of cover with frame to be not less than 38kg (weight of cover 23 kg. and weight of frame 15kg) R..C.C top slab with 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size ) foundation concrete 1:5:10 ( 1cement : 5 sand : 10 graded stone aggregate 40mm nominal size) inside plaster 15mm thick with cement mortar 1:3 (1 cement : 3 sand) finished smooth with a floating coat of neat cement on walls and bed concrete Inside dimensions 455 mm x 610 mm x 450 mm deep single pipe line. etc. complete.as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixingPE-AL-PE-Composite end seal compression fittings of Kitec as per IS:15450-2004 for cold water supply tees,elbows,reducers,connectors,couplers and clamps with jointing testing and fitting complete including cutting and making good the wall etcetera and entire carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Equal tees (1620)

Equal tees (2025)

Female elbow (1620x15 mm thread)

Female elbow (1620x20 mm thread)

Female elbow (2025x25 mm thread)

Female branch Tee (1620x1620x20 mm thread)

Female branch Tee (2025x2025x25 mm thread)

Male thread Connector 1620x15 mm thread

Male thread Connector 2025x25 mm thread

Reducing tee 1620x all branches

Reducing tee 2025x all branches

Coupler 1620

Coupler 2025

Reducer 1620x1216

Reducer 2025x1216

Reducer 2025x1620

Providing and fixingPE-AL-PE-Composite end seal compression fittings of Kitec as per IS:15450-2004 for hot water supply tees,elbows,reducers,connectors,couplers and clamps with jointing testing and fitting complete including cutting and making good the wall etcetera and entire carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Equal tees (1620)

Equal tees (2025)

Female elbow (1620x15 mm thread)

Female elbow (1620x20 mm thread)

Female elbow (2025x25 mm thread)

Female branch Tee (1620x1620x20 mm thread)

Female branch Tee (2025x2025x25 mm thread)

Male thread Connector 1620x15 mm thread

Male thread Connector 2025x25 mm thread

Reducing tee 1620x all branches

Reducing tee 2025x all branches

Coupler 1620

Coupler 2025

Reducer 1620x1216

Reducer 2025x1216

Reducer 2025x1620

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) 15mm nominal bore tube fitting and clamps including making good the wall, ceiling and floor:-as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Rajeev Sood