Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.8 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹11.0 L+₹14,600 (1.35%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | Rejected-Technical | - | Rejected-Technical Technically not suitable due to Non-compliance of Bank Solvency criteria |
| Sl No | Description | Qty | Unit | MAA ENTERPRISE L1 | FAIRDEAL CONSTRUCTION L2 |
|---|---|---|---|---|---|
| 0.00NOTE :- i) Bidders must visit the site before submission of tender. ii) Debris generated from this work shall be disposed off by the contractor outside VECC premises & Anushakti Abasan by manual / mechanical transport within Bidhan Nagar Municipality area without any extra cost to the department. Contractor should quote rates accordingly; The work shall be carried out time to time within a period of 24 months, as and when required. iii) Contractor has to be very careful so that no nuisance is created or users are not disturbed during execution of the work .labours engaged should be well behaved/good mannered. iv) The work should be done satisfying all safety aspects and insurance coverage of all workers to be involved in this job, Contractor should quote rates accordingly. v) Quoted rate should be inclusive of all costs, taxes & duties including GST. No extra payment over and above the quoted price will be paid. | |||||
| 1.00Providing and fixing 4mm thick plain sheet glass panes of M/s. MODI GUARD / SAINT GOBAIN or other approved equivalent Indian make at all level and location after thorough cleaning of surface including removing broken existing glass panes and re-fixing the same after replacement of glass etc. by providing glass putty and disposing unserviceable materials at a distance of 150M including providing man power, tools, tackles, new screws rubber channels, scaffolding including insurance coverage of all workers to be engaged in this job etc. as per the direction of the Engineer-in-Charge as per following sub- items:- | |||||
| 1.01 | (a) In Ground floor & 1st Floor | 40 | Sqm | 900 ₹36,000 | 800 ₹32,000 Lowest |
| 1.02 | (b) In 2nd floor and 3rd floor | 60 | Sqm | 1,000 ₹60,000 | 850 ₹51,000 Lowest |
| 1.03 | (c ) In 4th floor and 5th floor | 60 | Sqm | 1,000 ₹60,000 Lowest | 1,100 ₹66,000 |
| 1.04 | (d) In 6th floor and 7th floor | 60 | Sqm | 1,000 ₹60,000 Lowest | 1,400 ₹84,000 |
| 2.00Providing and fixing 6mm thick plain sheet glass panes of M/s. MODI GUARD/SAINT GOBAIN or other approved equivalent Indian make at all level and location after thorough cleaning of surface including removing broken existing glass panes, and re-fixing the same after replacement of glass etc. with glass putty and disposing unserviceable materials at a distance of 150 M including providing man power, tools, tackles, scaffolding including insurance coverage of all workers to be engaged in this job etc. as per the direction of the Engineer-in-Charge as per following sub- items:- | |||||
| 2.01 | (a) 6mm thick plain glass panes. | 30 | Sqm | 1,080 ₹32,400 Lowest | 1,100 ₹33,000 |
| 3.00 | Providing all manpower, tools tackles, consumables etc for repair of single/double leaf glazed aluminium doors varying from approximately 1.90 Sqm to 5.00 Sqm in area at all level and location, removing carefully from its existing position, checking all joints, drilling holes on aluminum sections, providing rubber gasket, self tapping steel screws for strengthening joints (if required), re-hanging shutters including providing repair/replacement of cast iron body floor springs, removing damaged parts, cleaning carefully, renewing screws, replacing pivots wherever required, adjusting floor spring for smooth operation etc, complete including scaffolding etc. as required and as directed by Engineer- In Charge. | 300 | Sqm | 480 ₹1,44,000 Lowest | 600 ₹1,80,000 |
| 4.00 | Providing material, labour, tools etc. for repair of existing fully glazed aluminium windows (both Casement & Sliding) shutter having area in between 0.45 Sqm to 0.65 Sqm at all level and location, dismantling window shutter from existing position, removing glass panes carefully, repairing/replacing aluminium handles, (to be provided by contractor) providing rivets for fixing handles securely with aluminium frame of shutter, providing and fixing flat rubber to window frame and suitable rubber gasket alround to glazing clip with adhesive, fixing new PVC cleat, cleaning entire framework, refixing glass and re-hanging shutter including replacement of damaged hinges / rollers (to be provided by contractor) for smooth operation of window etc. complete including scaffolding etc. as required and as directed by Engineer- In Charge. | 400 | Sqm | 500 ₹2,00,000 Lowest | 500 ₹2,00,000 Lowest |
Tender Value
₹9.3 L
EMD Value
₹18,500
Closing Date
25 Sept 2026, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Director, VECC
VECC, 1/AF, Bidhannagar, Kolkata 700064
Replacement of damaged window glass panes in different departmental flats at Anushakti Abasan, Hudco, Purbasha including maintenance of aluminium door and window shutters in all three campuses of VECC (i.e. Bidhanagar, Rajarhat and MCF Chakgaria).
2026_VECC_925384_1
VECC/MEG/ESD/CMS/NIT/ T-1932/B-47/1446 Date 08.09.2026
Open Tender
Civil Works
Item Rate
730 days
Anushakti Abasan, Hudco Purbasha three campus VECC
As per NIT
4 documents required · 4 mandatory
₹0
₹18,500
14 Oct 2026
10 Sept 2026
28 Sept 2026
11 Sept 2026
25 Sept 2026
17 Sept 2026
11 Sept 2026 - 18 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and fixing 4mm thick plain sheet glass panes of M/s. MODI GUARD / SAINT GOBAIN or other approved equivalent Indian make at all level and location after thorough cleaning of surface including removing broken existing glass panes and re-fixing the same after replacement of glass etc. by providing glass putty and disposing unserviceable materials at a distance of 150M including providing man power, tools, tackles, new screws rubber channels, scaffolding including insurance coverage of all workers to be engaged in this job etc. as per the direction of the Engineer-in-Charge as per following sub- items:- | |||||
| 1.01 | (a) In Ground floor & 1st Floor | 40 | Sqm | - | - |
| 1.02 | (b) In 2nd floor and 3rd floor | 60 | Sqm | - | - |
| 1.03 | (c ) In 4th floor and 5th floor | 60 | Sqm | - | - |
| 1.04 | (d) In 6th floor and 7th floor | 60 | Sqm | - | - |
| 2Providing and fixing 6mm thick plain sheet glass panes of M/s. MODI GUARD/SAINT GOBAIN or other approved equivalent Indian make at all level and location after thorough cleaning of surface including removing broken existing glass panes, and re-fixing the same after replacement of glass etc. with glass putty and disposing unserviceable materials at a distance of 150 M including providing man power, tools, tackles, scaffolding including insurance coverage of all workers to be engaged in this job etc. as per the direction of the Engineer-in-Charge as per following sub- items:- | |||||
| 2.01 | (a) 6mm thick plain glass panes. | 30 | Sqm | - | - |
| 3 | Providing all manpower, tools tackles, consumables etc for repair of single/double leaf glazed aluminium doors varying from approximately 1.90 Sqm to 5.00 Sqm in area at all level and location, removing carefully from its existing position, checking all joints, drilling holes on aluminum sections, providing rubber gasket, self tapping steel screws for strengthening joints (if required), re-hanging shutters including providing repair/replacement of cast iron body floor springs, removing damaged parts, cleaning carefully, renewing screws, replacing pivots wherever required, adjusting floor spring for smooth operation etc, complete including scaffolding etc. as required and as directed by Engineer- In Charge. | 300 | Sqm | - | - |
| 4 | Providing material, labour, tools etc. for repair of existing fully glazed aluminium windows (both Casement & Sliding) shutter having area in between 0.45 Sqm to 0.65 Sqm at all level and location, dismantling window shutter from existing position, removing glass panes carefully, repairing/replacing aluminium handles, (to be provided by contractor) providing rivets for fixing handles securely with aluminium frame of shutter, providing and fixing flat rubber to window frame and suitable rubber gasket alround to glazing clip with adhesive, fixing new PVC cleat, cleaning entire framework, refixing glass and re-hanging shutter including replacement of damaged hinges / rollers (to be provided by contractor) for smooth operation of window etc. complete including scaffolding etc. as required and as directed by Engineer- In Charge. | 400 | Sqm | - | - |
| 5 | Supplying and fixing in position at all floors integrated white matt/bronze or other colour anodized (of thickness 15µ)/finished aluminum extruded sections of Hindalco / Jindal or other approved equivalent Indian make sections/ aluminium grill etc. conforming to relevant IS specifications with size and weights as shown for frames and shutters for following types of Aluminium wall spans windows ( Sliding, fixed or hinged) and door units consisting of door shutters and fixed glazed / pre-laminated particle board fixing with approved anodized aluminum fittings and fastenings, all as shown in drawings, consisting of combined door frames and fixed glazing, mullions, transoms, with neoprene dry set glazing gaskets/EPDM rubber gasket with snap in beveled metal glazing stops inside and outside the standard sections, including providing and fixing brass body mortise lock with 4 levers with duplicate stainless keys, shutters mounted approved handles, concealed type tower bolts, buffers, stoppers providing suitable arrangement on pivots for smooth movement of door shutter and fixing 6 mm. thick special selected quality plain glass of M/S Modi Guard or approved equivalent Indian make including providing & fixing aluminum channel beading /glazing clip fixed with two way PVC lining/EPDM rubber gasketing to ensure water and air tightness, providing decorative SS matt pull handle of M/S HAFELE or equivalent Indian make 32 dia up to 600 mm long or as desired on both sides of each leaf of door make M/S HAFELE or equivalent Indian make, bolted with stainless steel bolts to aluminum doors, necessary fixing arrangement, cutting, making holes, threading, jointing by welding, bolting/screwing, including providing necessary scaffolding etc. complete transport, tools and plants necessary anodized screws etc, all as per drawings and as directed by EIC.
NB: All fitting fixture including friction stay (to carry 50kg max weight of each leaf of windows of maximum width 1.2mx1.2m height) should be premium quality under brand M/s HAFELE or M/s EBCO contractor should include the cost during quoting.
Note: ( i) Only extruded sections will be measured for payment. Rate shall include cost for all fittings & fixtures, fasteners, cleat, locks, door / window handle etc. (ii) Minimum anodizing thickness on all extruded section should not be less than 15 µ (micron). (iii) Payment shall be made per Kg. basis. Aluminium sections such as frame work/ aluminium grills etc. shall only be measured linearly as per actual/finish cutting size nearest to centimeter and multiplied with actual sectional weight of the individual section and the total quantity of aluminium section will be arrived at for payment without extra allowance for wastage. (iv) No separate payment for fittings such as locking arrangement, hinges, fittings and fixtures, gasket, cleat , handles, push/pull plate etc. shall be made nor measured for payment, Tenderers are requested to consider the cost of all fittings, fixtures, locking arrangement cleat gasket, screws, hinges etc. while quoting the rate for unit weight for aluminum sections. (v) Glass /prelaminated (both side) exterior grade particle board will be paid separately in relevant item | 300 | KG | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.74 MB
NIT.pdf
Tender Documents • 3.72 MB
InformationfromVendor.xls
Tender Documents • 0.10 MB
BOQ_972436.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .