Construction and Reparing Work of Footpath and Central verge and Other civil work at T.P.-1,2 Area and Other Area of Ghatlodia Ward in North West Zone (ARC) (As per AMC Circular 50 percent Qty From Amdavad Enviro Project Pvt. Ltd.)

Name of Work :- Construction and Reparing Work of Footpath and Central verge and

Other civil work at T.P.-1,2 Area and Other Area of Ghatlodia Ward in North West

Zone (ARC) (As per AMC Circular 50 % Qty From Amdavad Enviro Project Pvt.

Quantity Item Unit Rate Amount

Center Line Marking Preparaition of drawing and

Establishment of Center Line for the proposed Right Of

Way using Total Station survey method and Marking

using good quality enamel paint as directed by

Engineer-In-Charge. Contractor shall get the drawings

approved from Architect and submit to AMC before

commencement of the work. The work includes traffic

diversion provision so as to ensure smooth flow of

traffic.(Heritage Route Tapovan Visat Tender Approved

Dismantling the following including loading, unloading

and disposal of unserviceable material for all lead or as

2 directed by Engineer-In-Charge and stacking the

serviceable material and backfilling the resulting

trenches and pits complete.

a 1.00 central verge -kerb stone Rmt 8

Dismantling tiled or stone floors laid in mortar including

b 550 stacking of serviceable material and disposal of Smt 27.44

uservicalble material with all lead and lifts.

Demolition & disposal of unservisable material with all

lead and lift for unreinforeced concrete. (AMC sor)

Demolition of brick work & stone masonry including

stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift (1) In

Demolition including stacking of serviceable materials

e 1.00 and disposal of unserviceable materials with all lead and Cmt 604.74

lift. (I) R.C.C work.

Scarifying of existing bituminous road surface (flexible

Pavement) by mechanical means upto required depth

to receive new tar road top layer i.e. seal coat and

3 1.00 bitumineous concrete including tools, plants, fuel, oil Smt 22.23

etc and disposal of unserviceable material/ debries with

all lifts and leads As directed by engineer in charge.(CG

Road Approved Rate)

Excavation of asphalt pavement of any thickness with all

sub layer including demolishing the asphalt carpet,

metal, soiling using any type of road cutter and breaker

machine (controlled cutting) including cost of operator,

fuel, & transportation etc complete with stacking the

material as directed. (CG Road Approved Rate)

Removing & recover of existing pipe line for sewer or

5 1.00 storm water above 300mm dia upto any depth & Rmt 89.29

Specials, removing any type of joint, carting it to the

Muni. Stores as & where directed as per instruction of

Engineer In charge with excavation & refilling.(CG Road

Dismantling of existing structural steel work for railing,

grill, gate, grating,jali, etc including foundation, sorting

the dismantled material, disposal unserviceable

material with all lifts and up to any lead at non

objectional place and stacking the serviceable material

(structural elements) upto AMC store including loading,

unloading as directed by Engineer-in-charge.(CG Road

Removal of existing any type of paving or paving stones

of any type, any size, any thickness in required depth

including removing paver with spil sub base and

breaking sub base i.e concrete or metaling etc under

the supervision of concerned department, disposal

unserviceable material with all lifts and up to any lead

at non objectional place and stacking the serviceable

material (paver) upto AMC store including loading,

unloading as directed by Engineer-in-charge. (CG

Road Approved Rate)

Removal of existing kerb stones of any type, any size,

any thickness in required depth including removing kerb

with base PCC including excavation etc under the

supervision of concerned department, disposal

8 200.00 unserviceable material with all lifts and up to any lead Rmt 13.39

at non objectional place and stacking the erviceable

material (paver) upto AMC store including loading,

unloading as directed by Engineer-in- charge. (CG Road

Pole Removal Removal of existing Light Poles/

telephone pole/ electrical pole/ signage pole with

fixtures/ signage sheet/ all cabling work including

excavation, Breaking concrete foundation under the

supervision of concerned department, disposal

unserviceable material with all lifts and up to any lead

at non objectional place and stacking the serviceable

material upto AMC store including loading, unloading as

directed by Engineer-in- charge.(CG Road Approved

Traffic Signal Removal Removal of existing Traffic Signal

Poles with all lighting arrangement and cabling work

including excavation, Breaking concrete foundation

under the supervision of concerned department,

10 1.00 disposal unserviceable material with all lifts and up to No 2669.64

any lead at non objectional place and stacking the

serviceable material upto AMC store including loading,

unloading as directed by Engineer-in-charge. (CG Road

Shifting of pole Shifting of Telephone /Electric poles and

Lines with all cabling work including excavation, and

dismantling of foundation concrete and lines under the

11 1.00 supervision of concerned department, disposal No 5339.29

unserviceable material with all lifts and up to any lead

at non objectional place and stacking the serviceable

material upto AMC store including loading, unloading as

directed by Engineer-in-charge. (CG Road Approved

Removal Bus Shelter Removal of existing Bus Shelter

with all structure elements with seating arrangement,

roof, supports, advertise elements etc including

excavation, Breaking concrete foundation under the

supervision of concerned department, disposal

unserviceable material with all lifts and up to any lead

at non objectional place and stacking the serviceable

material upto AMC store including loading, unloading as

directed by Engineer-in-charge. (CG Road Approved

Repairing damaged M.H. and rasing M.H. up to road

level incl. removing damaged brick work and repairing

by brick masonry in C.M. 1:5 and plaster in C.M. 1:3 and

13 fixing C.I. steps and existing MH sheet cover, removing

the debris from MH and carting the same as directed.

(Based on Drainage SOR 2009-10) Road Resurface zonal

tender approved rate 2022-23

a 6.00 (A) up to 0.15 mt. (@ Two Coarse) No 728.82

b 2.00 (B) up to 0.35mt. (@ Four Coarse) No 1155.44

c 1.00 (C) up to 0.65 mt. (@ Seven Coarse) No 1786.49

d 1.00 (D) up to 0.90 mt. (@ Ten Coarse ) No 2150.9

Repairing damaged I.C./ Raising removing damaged

brick work and repairing by brick masonry in C.M. 1:5

and plaster in C.M. 1:3 and fixing C.I. steps and existing

14 1.00 chamber sheet cover, removing the debris from No 399.96

chamber and carting the same as directed. (Based on

Drainage SOR 2009-10) Road Resurface zonal tender

approved rate 2022-23

Conveyance charge of earth, lime, murrum, building

rubbish, manure, garbage, sludge, excavated rock, fly

ash, aggregates of any kind executed outside the road

site. Rate also includes spreading & levelling etc

complete. Internal conveyance above 50 mt done within

the work site is not payable. (R&B 2021-22 Statement

No.5 Page no.5 & RA Approved St.Com.Res

a 1.00 a) Lead up to 1 Km. Cmt 23.38

b 1.00 b) Lead From 1Km to 2 Km. Cmt 30.94

c 1.00 c) Lead From 2 Km to 3 Km. Cmt 38.37

d 1.00 d) Lead From 3 Km to 4 Km. Cmt 45.52

e 1.00 e) Lead From 4 Km to 5 Km. Cmt 52.42

f 193.00 f) Lead From 5 Km to 10 Km. Cmt 78.54

g 10.00 g) Lead From 10 Km to 15 Km. Cmt 104.65

Barricading the entire break down or excavated area on

rental basis using wooden ballies / M.S.angles at max.

2.00 meter centre to centre, C.G.I. Sheet, reflective

paint / Board outside to avoid accident & for smooth

16 1.00 traffic diversion & movement including cautionary Rmt 79.99

board etc. Item also includes for making temporary

sufficient nos of lighting arrangement throughout the

work with necessary required arrangement. ..The same

shall be removed after completion of work. (Only for

break down work from start to complete) (Based on

Drainage SOR 2009- 10)Road Resurface zonal tender

approved rate 2022-23

Providing F.R.C. MH seat cover incl. carting to the work

17 site etc. comp. Directed. (Based on rate of central store

F.R.C. Extra Heavy Duty (EHD-35) Manhole Covers.

Cover : 728mm ø & 100 mm thick circular cover,

a 6.00 MT load design, 100x2mm MS flat allround, 16mm ø No 1368.75

plain round bar for lifting the cover & should be fitted

with plastic cups.

Carting and Fixing M.H., Chamber or Catchpite Seat and

Cover in line and level to match exisisting road level in

C.C. 1:2:4 and finishing smooth, watering and protecting

for 7 days etc. complete as directed. M.H. seat cover

will be supplied byA.M.C.(from any store) (AMC

Providing cast iron machine hole frame of weight 80 to

85 kg suitable for existing EHD- 35 FRC MH cover,

19 1.00 rate also incl. loading, unloading the frame as Kg 71.1

per instruction by engg. in charge. (AMC approved Rate

)Zonal Tender AMENDMENTS

Constructing Bombay Pattern Type Catch Pit of size

x 0.60 depth up to 1 mt including excavation, B.B.C.C.

(1:5:10), 23 cms thick brick maso. wall in the prop. of

20 1.00 CM (1:6) with 40 mm thick IPS flooring in the prop M15 No 3110.8

at bottom and 15 mm thick cement plaster inside the

catch pit in the proportion of CM (1:3) without jali etc.

comp. as directed. (AMC approved Rate )

CatchPit Jali (Heavy duty) Fixing P/F FRC catch pit jali

21 1.00 with frame 600mm x 600mm clear opening etc. comp.. No 1377.64

As directed by engineer incharge. (AMC approved Rate )

Providing and placing in position 100 mm thick factory

made fair finish Precast RCC Rectangular frame &

perforated/ slotted Covers on drains Alcock, Vyara, of

footpath of various sizes, of M- 25 grade cement

22 1.00 concrete for RCC work, including cost of moulding, No 3240.79

reinforcement, rendering, etc i.c. cost of cartage, all

leads & lift, handling at site etc. all complete as per

direction of Engineer-in-Charge.(CG ROAD Approved

Excavation for foundation upto 1.5m depth including

sorting out and stacking of useful materials and

23 193 disposing off the excavated stuff up to 50 Meter Cmt 88.3

lead.(B)Dense or Hard soil (R&B Dist. AHMEDABAD SOR

2021-22 No.04001B page No.41)

Excavation for foundation for depth from 1.5mto3.0min

cluding sorting out and stacking of useful materials and

24 1.00 disposing off the excavated stuff upto 50 Meter lead.(B) Cmt 95.8

Dense or Hard soil (R&B Dist. AHMEDABAD SOR 2021-

Excavation for foundation upto 1.5m depth including

sorting out and stacking of useful materials and

25 1.00 disposing off the excavated stuff upto 50 Meter Cmt 69

lead.(A)Loose or soft soil (R&B Dist. AHMEDABAD SOR

2021-22 No.04001A page No.41)

Excavation for foundation for depth from 1.5m to 3.0m

including sorting out and stacking of useful materials

26 1.00 and disposing off the excavated stuff upto 50 Meter Cmt 76.5

lead.(A) Loose or soft soil (R&B Dist. AHMEDABAD SOR

2021-22 No.04002A page No.41)

Box cutting the road surface to proper slope and

camber for making a base for road work including

27 1.00 removing the excavated stuff and depositing on the Cmt 127.13

road side slope as directed upto 200 Mt.lead.(R&B SOR

2021-22 ITEM CODE 26008 Item no.as per NBO )

Filling available excavated earth (excludingrock)

intrenches. plinth,sides of foundations etc. Inlayers not

28 1.00 exceeding 20cm. Indepth consolidating each disposited Cmt 78.55

layer by ramming and watering.(R&B Dist. AHMEDABAD

SOR 2021-22 No.4006 page No.43)

Filling in foundation and plinth with murrum or selected

soil in layers of 20cm.thickness including

29 1.00 watering,ramming and consolidating etc. complete. Cmt 192.45

(R&B Dist. AHMEDABAD SOR 2021- 22 No.04008A page

Providing and laying cement concrete 1:5:10 (1- Cement

: 5- fine sand : 10- graded brick bat aggregates 40mm

nominal size) and curing omplete.(R & B SOR Item code

05009A, NBO 5.3.8 Page 74) Road Zonal tender 2022-23

Providing and laying cement concrete 1:3:6 (1- Cement :

3- Coarse sand : 6- Hand broken stone aggregates

31 19.86 40mm nominal size) and curing complete.(R & B SOR Cmt 2339.59

Item code 05003A, NBO 5.3.2 Page 73) Road Zonal

Supplying and Spreading good quality coarse sand free

from Impurities including Transporation to Site and

labour cost for Spreading etc. Comp. as directed.(

Approved AMC rate)Road Zonal tender 2022-23

Providing, laying, spreading and compacting graded

stone aggregate to wet mix macadam specification

including premixing the Material with water at OMC in

mechanical mix plant carriage of mixed Material by

33 tipper to site, laying in uniform layers in sub- base /

base course on well prepared surface and compacting

with vibratory roller to achieve the desired density as

per Codal Provision.(RA Approved St.Com.Res

No.189,Dt.19/05/2022)Road Zonal tender 2022-23

a 55 Production & Supply of WMM Cmt 1708.13

b 55 Laying of WMM Cmt 31.25

Providing TMT Bar FE500D reinforcement for R.C.C.

Work including bending,binding and placing in position

34 1.00 complete upto floor two level (R & B Building SOR 2021- Kg 63.1

22 Item No.05014C as per NBO-5.4.11 page no.49 Dist.

AHMEDABAD SOR 2021-22) Road zonal tender 2022-23

Providing, fabricating, assembling, hoisting / erecting

and fixing inposition structural steel work at all heights/

all levels/ all shapes &sizes with all leads & lifts using

any type of section like MS Rolled Steel Sections, Hollow

sections, Tubular Sections, MS Plates, Chequered Plates

etc. all confirming to latest relevant IS codes for the

work of steel structures railings, signage pole, jali, gates,

Bus shelter, screen wall, smart pole, commercial pole,

gantry structure, grills, bracings, bollards, foundation

plate and bolt, platforms, brackets, cattle trap, framing

foradvertise box on lighting pole, electrical elements

etc. including straightening, cutting, bending, bolting

and welding the members all as per structural drawings

and as per detailed specifications (for materials &

workmanship) including necessary scaffolding/ staging,

anchor fasteners etc. complete in the situations

described hereinafter and comprising of : i) Profile

Cutting of components to required lengths/ widths and

shapes/ profiles; ii) Smooth grinding / machining of

edges / faces / all welding joints; iii) Necessary welding

(electric arc welding) for required weld lengths and sizes

shall be carried out by qualified welders.

iv) The fabrication work shall start only after approval of

the fabrication drawings. Any change required in the

fabrication drawings shall be carried out at no extra

cost. Fabrication shall be in a perfect Architectural

workmanship manner and as provided in Section V & VI

7215. v) Electrodes for welding, the procedure,

selection, test and inspection shall confirm to provisions

vi) Erection / hoisting shall commence only after

approval of fabricated parts by the Engineer in charge.

vii) Necessary arrangements of templates to keep the

foundation bolts in position, shall be made by

contractor without any extra cost.

viii) The rate shall include for applying two or more

coats of approved make and shade PU paint over two

coat of anti corrosive epoxy base primer, as per

instructions. In case of CNC work,

extra cost of CNC work shall be paid in relevant tender

Removing and refixing existing railing (upto 0.60 mt

height) as a barricadding or diversion lane as per

requirement of project execution stage and as directed

by engineer in charge. Rate shall be inclusive of required

foundation and steel member for fixing of railing. After

completion of work,contractor shall dispose all material

related to railing/ barricading i.e. disposal of

unserviceable material with all lifts and up to any lead

at non objectional place and stacking the serviceable

material (structural elements) upto AMC store including

loading, unloading as directed by Engineer-in-charge(CG

Providing and laying in position Ready Mixed M

grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix

manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up

to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of

R.M.C. from transit mixer to site of laying, excluding the

cost of centering shuttering finishing and reinforcement

including cost of admixtures in recommended

proportions as per IS: 9103 to accelerate/ retard setting

of concrete, improve workability without impairing

strength and durability as per direction of the Engineer -

in - charge. ithout Fly Ash (Min cement level as per

latest IS 456 shall be maintained) (R&B Ahmedabad City

SOR 2023-24, Item No.5055)

P/A Tremix with dewartering machine and floater

machine on constructed CC work for finishing the

surface as per requirement. The rate including all

machinaries, labor, loading, unloading, transportaion

etc complete as per direction given by engineer in

Labour work for fixing any kind of paving with cement

pointing in CM 1:2, including watering, ramming etc

39 200.00 comp. as dir.For pavement aI) Laying on Sand Smt 69.64

bedding as per requirement to fix the C.C.Block /

Nibhada Stone in Line & Level

Supplying and fixing of 380 mm H x 300 mm L x 200 mm

B Kerb block for Central Verge in M-20 grade using

mm nominal size black trap aggregate of Sevaliya/Timba

or equivalent quality for pre-cast blocks, reasonably

exposed finish/ formwork, mould with well equipped

with vibratory system for kerb stones of approved

design including curing, etc. complete, including the

cost of formwork etc. complete. The rate shall also

include necessary cutting of asphalt, fixing the Kerb

stones in line and level on 5 cm thick sand bedding with

necessary equipments and materials. The rate shall also

include the flush pointing in CM (1:3) for all joints of the

kerbstones. Filling of zari alone the sides of the kerb

stone fixed with Bituminous concrete mixed in proper

position as directed by Engineer in change to form a

portable mixture. In any case Gravel or such type of

materials shall not be allowed for production.(AMC

approved Rate )a) Laying on 5 cm thick Sand Bedding

Supplying and fixing of 300 mm-L x 150 mm-B x

mm-H Kerb block for Footpath in M-20 grade using

mm nominal size black trap aggregate of Sevaliya/Timba

or equivalent quality for pre-cast blocks, reasonably

exposed finish/ formwork , mould with well equipped

with vibratory system for kerb stones of approved

design including curing, etc. complete, including the

cost of formwork etc. complete. The rate shall also

include necessary cutting of asphalt, fixing the Kerb

stones in line and level on 5 cm thick sand bedding with

necessary equipments and materials. The rate shall also

include the flush pointing in CM (1:3) for all joints of the

kerbstones. Filling of zari alone the sides of the kerb

stone fixed with Bituminous concrete mixed in proper

position as directed by Engineer in change to form a

portable mixture. In any case Gravel or such type of

materials shall not be allowed for production. (AMC

approved Rate (a) Laying on 5 cm thick Sand Bedding

Pre cast concrete kerb Providing and fixing M25 Grade

of concrete precast exposed / Fair finish / texture finish

kerb stones of approved make as per approved sample

of any size and any type. Kerbs shall be fixed on the

foundation prepared as per approved design. The rate

shall also include for erecting and fixing the pieces in

position for complete kerb system with chamfered type

of kerbs including necessary accessories of kerb like

42 1.00 radius kerb, angles and quadrant kerbs, droplet kerbs Rmt 1061.61

etc. complete as per drawing. Kerb shall be fixed as

paper joint without any jointing material. However

cement mortar shall be provided at the backside of kerb

stone joint. (Sample must be approved) Cost of

excavation, cutting , base , side filling shall includes as

directed engineer - incharge in above item description

as per BOQ (a) 450 hight x 600x 150 mm high median

kerb.As per approved rate

Pre cast concrete kerb Providing and fixing M25 Grade

of concrete precast exposed / Fair finish / texture finish

kerb stones of approved make as per approved sample

of any size and any type. Kerbs shall be fixed on the

foundation prepared as per approved design. The rate

shall also include for erecting and fixing the pieces in

position for complete kerb system with chamfered type

of kerbs including necessary accessories of kerb like

radius kerbs, angles and quadrant kerbs, droplet kerbs

etc. complete as per drawing. Kerb shall be fixed as

paper joint without any jointing material. However

cement mortar shall be provided at the backside of kerb

stone joint. (Sample must be approved) Cost of

excavation, cutting , base , side filling shall includes as

directed engineer - incharge in above item description

(b) 380 x 600 x 150 mm high Footpath kerb. As per

Providing & laying Mountable type Central Verge

including casting of Kerb of size 15.00 x 32.50 Cm by

mechanical Kerb casting machinery and oil paint colour

to Center verge (Kerb) by Yellow/white and Black patta

(Three Coat) one coat of priming & two coat of oil Paint

including cost of material required for paint and all

labourworketc complete as per direction, detailed

drawing and instruction of engineer incharge .(Including

Epoxy Piant of Approved Quality) (Central Verge) Rate

Anlaysis as per AUDA tender

Supplying and fixing for central verge 230 mm L x

mm Width x 680 mm H Supplying & Fixing in M-20

grade using 20 mm nominal size black trap aggregate of

sevaliya/timba or equivalent quality for pre-cast

blocks,reasonably exposed finish/formwork,mould with

45 1.00 well equipped with vibratory system for kerb stones of Rmt 1376.75

approved design including

curing,etc.complete,including the cost of formwork

etc.complete.THe rate shall also include necessary

cutting of asphalt,fixing the kerb stones in line and level

on 5 cm thick sand bedding with necessary equipments

and materials.The rate shall also include the flush

pointing in CM(1:3)for all joints of the kerbstones.Filling

of Zari alone the sides of the kerb stone fixed with

bituminous concrete mixed in proper position as

directed by engineer in charge to form a portable

mixture.In any case gravel or such type of materials

shall not be allowed for production. (based on Road

Providing and Laying of Rubber Moulded Paver Block

Grey/Coloured 60 mm thick, M-35 Grade of any size ;

shape (Usually Uni-Paver Blocks) using black trap good

quality aggragate of 20 mm nominal size for footpath,

parking areas, service lanes and other areas as

mentioned in the drawing / instruction of engineer in

charge. Cost includes formworks using rubber mould,

Rate providing and laying paver blocks as per required

grading and specification. The paver block shall be

mechanically compacted. The work of paving blocks

shall be executed in line and level by skill mason of

flooring work only. It should be laid in such a way that

the no cutting of the paver block to be necessary. if

cutting of paver block necessary then it should be cut by

machine only and carting. The finished surface of the

paver block shall have resonably good, plain finished.

Paver blocks shall be compacted and shall be relaid if

necessary. Gravel or such type of materials shall not be

allowed for production. Laying on 5cms thick sand

beddding.(AMC approved Rate )

Providing and laying of interlocking grey Paver Blocks of

high density 80mm thick made from M-40 grade

concrete using 6 mm to 20 mm machine crushed well

graded stone aggregate, sand of approved quality, OPC

53 grade cement with contractor's own concrete mix

design as approved by AMC, for parking, road. Cost

Includes formwork, using rubber/FRP mould, laying

paver block as per required grading and specification

laid paver block shall be mechanically compacted. The

47 1.00 work of the paving blocks shall be executed in line and Smt 572

level by skilled mason of flooring work only. It should be

laid in such a way that the no cutting of the paver block

to be necessary. Cutting of paver block by machine cut

only and carting to be done. The Finished surface of the

Paver Block shall have reasonably good plain finish.

Paver blocks shall be compacted and shall be re-laid if

necessary. Gravel or such type of materials shall not be

allowed for production. Laying on 5 Cms thick sand

Paver Block Providing and laying shot blasted Non -

interlocking, Paver blocks of specified thickness, size,

grade of concrete and colour machine made and

blasting by automatic shot blasting machine and high

48 200 density of as per approved sample of approved make Smt 669.65

for footpath, parking areas, service lanes,cross over and

other areas as mentioned in the drawing. Including

providing and laying 50 mm thick averave bedding layer

of coarse sand below paver block as per required

grading and specification. Laid paver block shall be

mechanically compacted. The work of the paving blocks

shall be executed in line and level by skilled mason of

flooring work only. Small size of paver block with same

specification shall be used at residue or at end. It should

be laid in such a way that the no cutting of the paver

block to be necessary. If cutting of paver block shall be

required , than cut by machine only and laying to be

done by skilled flooring mason. The finished surface of

the paver block shall have coarse sand Texture Finish.

Pave blocks shall be compacted and shall be re-laid if

necessary. Actual laid area shall be measured and paid

without any wastage.

(A)60 mm thick M-35 grade Grey Paver block of size

Paver Block Providing and laying shot blasted Non -

interlocking, Paver blocks of specified thickness, size,

grade of concrete and colour machine made and

blasting by automatic shot blasting machine and high

density of as per approved sample of approved make

for footpath, parking areas, service lanes,cross over and

other areas as mentioned in the drawing. Including

providing and laying 50 mm thick averave bedding layer

of coarse sand below paver block as per required

grading and specification. Laid paver block shall be

mechanically compacted. The work of the paving blocks

49 1.00 shall be executed in line and level by skilled mason of Smt 758.93

flooring work only. Small size of paver block with same

specification shall be used at residue or at end. It should

be laid in such a way that the no cutting of the paver

block to be necessary. If cutting of paver block shall be

required , than cut by machine only and laying to be

done by skilled flooring mason. The finished surface of

the paver block shall have coarse sand Texture Finish.

Pave blocks shall be compacted and shall be re-laid if

necessary. Actual laid area shall be measured and paid

without any wastage. (A) 80 mm thick M-35 grade Grey

Paver block of size 200mm x 200mm.

Labour work of fixing kurb any design of central verge,

(both side) footpath kurb, items includes necessary

excavation, asphalt cutting of any thickness, erecting in

50 1.00 line and position and pointing with cement mortar (1:3), Rmt 136.4

watering, etc complete, filling with zari along the side of

the kurb, the kurb stone fix prepared with bitumnious

top surface, as directed by engineer in charge.

Labour work for fixing interlocking blocks / any kind of

pavement on up to 50 mm thick sand bedding,

51 1.00 levelling,watering and fixing in line & level as well Smt 68.64

cleaning the site etc.comp. as directed.(AMC approved

Bitumen Cutting Labour charge of cutting in bituminous

pavement. Cutting to be done with heavy duty tandom

cutting machine consist of diamond blade. Minimum

cutting depth shall be 75 mm from the finished level.

Cutting shall be perfeclty in line. The width and depth of

the removal of asphalt towards kerb stone shall be as

per the drawing. Bitumen shall be carefully removed so

that the the cutting edge towards the road should not

be disturbed. The work of removal of the asphalt will be

considered in this item as running meter of the cutting

done by machine. One cutting line will be considered

per length of the kerb stone. Bitumen and other debris

shall be disposed within 10.0 km. as per the instruction

of the engineer in charge. Surroundings shall be cleaned

to the satisfaction of the engineer in charge.

Removing and refixing of kerb Removal of

existing kerb stones of any type, any size, any thickness

in safe manner with base PCC including excavation etc

and refix the same as desired location as per drawing

and as directed by Engineer in charge. Rate shall be

inclusive of removing with all subbase (including

53 1.00 excavtion), refixed the same (approved before reuse) on Rmt 72.32

existing base PCC, addition kerb of same profile (if

required and shall be paid relevant tender item),

disposal unserviceable material with all lifts and up to

any lead at non objectional place and stacking the

serviceable material (paver) upto AMC store including

loading, unloading as directed by Engineer-in- charge.

Filling Zari Filling of Zari along the sides of the kerbstone

fixed, prepared with Bituminous Concrete mixed in

54 1.00 proper proportion as directed by Engineer- In - Charge Rmt 50

to form a pourable mixture. (Street Devlopment of

Dehgam Road From Devi Cinema road tender)

Providing and laying cement concrete tactile tile (for

vision impairedpersons as per standards) of size 300 x

300 x 25 to 30mm of Vyara, Super, Nishu approved

make and pattern having water absorption not over 6%

and conforming to IS: 13801:1993, of approved make,

pattern and shade (with UV light resistant colours from

55 1.00 Lanxess only) in outdoor floors such as footpath, court Smt 702.24

yard, multi modals location etc., laid on 30 to 40mm

thick base of cement mortar 1:4 (1 cement : 4 coarse

sand) in all shapes & patterns including grouting the

joints with white cement mixed with matching pigments

etc. complete as per direction of Engineer-in-

Charge.(CG Road Approved Rate)

Pre cast Cylindrical Bollard Providing and fixing cylinder

pre cast bollard with exposed/ fair finished made in

M-30. Bollard is precast with cement concrete of M-30

grade by providing 4 no of 12 mm dia. tor steel by vibro

compaction method using FRP/steel mould for achive

shutttring finish as directed and approved by EIC.

Sample shall be approved. Approximate size of bollard is

900 to 1000mm height x 225 to 300mm dia. Rate shall

be inclusive of concrete, reinforcements as stated in the

item description, necessary moulds, pouring, placing,

compaction, necessary curing, all accessories required

for fixing, with all taxes, transportation, loading and

unloading charges. Additional reinforcement, if any shall

be measured and paid for in the relevant tender item.

The rate shall also include for erecting and fixing the

pieces in position etc complete as per drawing. The rate

shall also include the cost of excavation, base PCC M15

grade and finish good, curing etc complete as directed

by engineer in charge.(C G Road tender Approved Rate)

Providing and applying Synthetic Enamel Paint on

existing MS structural steel work with minimum two

coat of paint of approved make and shade including

57 1.00 cleaning all dust, durt and other foriegn matters, sand Smt 66.07

papering, scafolding etc with all material labour

equipments for all height as directed by engineer in

charge.(C G Road tender Approved Rate)

Painting Two Coats on divider and footpath curb surface

/ New Concrete Surface ( Painting two coats after filling

the surface with synthetic enamel paint in all shades on

new plastered concrete surfaces) (AMC approved Rate )

Road marking with hot applied thermoplastic paints

with reflectorising glass beads on bitumin surface

providing and laying a hot applied thermoplastic

compound 2.5 mm thick including reflectorising glass

59 1.00 beads @ 250gms per sqm area, thickness of 2.5mm is No 510.62

excluding of surface applied glass beds as per IRC:35.

The finished surface to be level, uniform and free from

streaks and holes.) Directional Arrow, Lettering. (AMC

Cat Eye/ Road Stud/ RPM: Supplying of Molded Twin

Shanks Raised Pavement Markers made of

polycarbonate and ABS moulded body and reflective

panels with micro prismatic lens (No glass bed lens)

60 1.00 capable of providing total internal reflection of the light Nos 320.86

entering the lens face and shall support a load of

kgs .tested in accordance to ASTM D 4280 Type Hand

complying to Specifications of Category A of MORTH

Circular No RW/NH/33023/10-97-DO III

Dt 11.06.1997 .The height, width and length shall not

exceed 20 mm, 130 mm and 130 mm and with

minimum reflective area of 13 Sqcm on each side and

the slope to the base shall be 35 +/- 5 degree.The

strength of detachment of the integrated cylindrical

shanks, (of diameter not less than 19 +/- 2mm and

height not less than 30 +/-2 mm) from the body is to be

a minimum value of 500 Kgf. Fixing will be by drilling

holes on the road for the shanks to go inside,without

nails and using epoxy resin based adhesive as per

manufacturers recommendation and The color of the

marker should be as per the IRC35-2015 and as directed

by Engineer-in-charge. (R & B SOR 2021-22 Item No.

Providing and setting 50 to 60 mm thick rouge kotah

stone water table in line, level and in required gradient

including 25 mm thick beddcing in C.M. 1:6 (1 Part of

cement : 6 Part of coarse sand) with sufficient ramming

consolidation. Providing joints in C.M. 1:3 (1 Part of

cement : 3 Part coarse sand) and smooth pointing in

C.M. 1:1 (1 Part of Cement, 1 Part of coarse sand)

including watering etc. complete and as per details in

tender specification & as directed by engineer in charge.

(SMC Approved tender Rate) Road Zonal tender 2022-

b 1.00 Size : 1' x 1'(40 to 50 mm thick) Rmt 103.52

Providing and fixing SS 304 grade satin finish perforated

dust bin / litter bin of size 850 mm x 300 mm x 850 mm

and capacity 50 Ltr each bin madeout of minimum

1.2mm thick sheet with pole of Saflow, Jindal, KMGS

and as per approved sample. Dust bin shall be floor

mounted with both side pivot for tilting having stand

arrangement. Both bin shall be covered with SS sheet.

Dust shall be having chemical resistant, blended with

stabilizers, Anti Corrosive, Anti Acidic, Non toxic and

free from joints, welds or rims; open from either side

for easy garbage drop even from distance, Dustbin shall

be as per approved and seperate Dustbin for Dry and

wet Waste shallbe provided( Green and Blue Colour

Demarcation on it) (CG Road Approved Rate)

Providing and making Tree pit. It includes excavation

upto 600 mm depth including removal of the debris,

Size of the pit is 1000 mm dia. Hume pipe of 900 mm

dia NP2 class with 500 mm height to be placed in the

excavated pit and outside area of the Hume pipe to be

filled with the good quality earth completed as directed

by Engineer-in-Charge. Hume pipe shall be filled with

63 1.00 the garden soil,( 10Kg/ per Tree pit of Vermi Compost or No 844.87

mixture of decade neem cake and tobaco powder). upto

required depth and remaining bottom part shall be

filled with good soil completed as directed by Engineer-

in- Charge. Rate includes rate of hume pipe, garden soil

with Vermi Compost or mixture of decade neem cake

and tobaco powder , good soil etc.(CG Road Approved

Providing and fixing tree guard, fabricated from 25 x

x 3 mm MS angle and 32 x 32 mm of 3.2 mm thick MS

weld mesh as per drawing and details. Necessary

provisions for the anchoring to floor shall be made in

the tree guard. Tree guard shall be painted with 1 coat

of epoxy primer of 50 to 60 micron DFT (dry film

thickness) and 2 top coats of Metal PU Paint of having

DFT 40 to 50 micron of approved shade of MRF or

equivalent paint as per manufacture’s specification over

all the surfaces or as specified in the drawing as per the

shade approved as per the drawing and specification.

The rate shall also include the fixing of necessary name

plate. (Sample to be approved) (CG ROAD Approved

Providing and fixing 75 mm thick Tree Grating

950*950*75 mm as per design and drawing. The rate

shall be inclusive of providing and laying 50 to 80 mm

thick average bedding layer of coarse sand below tree

grating as per required grading and specification. The

centre of the grating to be same as the centre of the

tree trunk. The grating to be 8 pieces as per drawing.

The work of the grating blocks shall be executed in line

and level by skilled mason of flooring work only. (Sola

Scienecity Road tender Rate)

Paver Block Providing and laying, Dished Channel

specified thickness, size, grade of concrete and colour

machine made and blasting by automatic shot blasting

machine and high density of as per approved sample of

approved make for suite drain besides paking area and

other areas as mentioned in the drawing. Including

providing and laying 50 mm thick average bedding layer

of coarse sand below dished channel as per required

grading and specification. Laid dished channel shall be

mechanically compacted. The work of the dished

channel shall be executed in line and level by skilled

mason. Small size of dished channel with same

specification shall be used at residue or at end. If cutting

of dished channel shall be required , than cut by

machine only and laying to be done by skilled flooring

mason. Actual laid area shall be measured and paid

without any wastage. (A) 600 mm X 300 mm X 100 mm

thick M-25 grade Grey dished curved channel

DWC Pipes Supplying and laying following sizes Double

walled corrugated HDPE pipes confirming IS 14930 Part

1 & Part 2 of approved make in open / concealed in

67 1.00 manner including excavation and back filling (if Rmt 267.86

required) as per layout and drawing and re-filling the

trenches etc. complete as directed. (NP Class) 120 MM

OD DWC Pipe(CG Road approved Rate)

Brick work using common burnt clay building bricks

having crushing strength not less than 35kg./Sq.Cm. In

foundation and plinth in Cement Mortar 1:5. (1-

Cement: 5 -fine sand)(B) Conventional

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for

69 1.00 interior plastering upto floor two level and finished Smt 104.06

even and smooth in (i) Cement mortar 1:3 (1-cement:3-

sand) (R&B SOR)