Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.3 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹26.4 L+₹6,260 (0.24%)Rejected-Finance | L2 | Rejected-Finance BEING NOT LOWEST | |
| 3 | L3₹29.9 L+₹3.6 L (13.9%)Rejected-Finance | L3 | Rejected-Finance BEING NOT LOWEST | |
| 4 | L4₹30.8 L+₹4.5 L (17.1%)Rejected-Finance 224 OFFICERS ENCLAVE BEHIND PLV MEMORIAL COLLEGE SHIKARGARH ARMY AREA JODHPUR RAJ 342001 | JODHPUR | RAJASTHAN | 342001 | L4 | Rejected-Finance BEING NOT LOWEST |
| Sl No | Description | Qty | Unit | star electricals L3 | L C ASSOCIATES L2 | Akarsha Enterprises L1 | M/S HARIOM CONSTRUCTION COMPANY L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | M&L for servicing, repair/maint and pressure test of the condensor and cooling coil of Chiller Water cooled type central AC plant of 25 /26TR capacity and dismantling the same for repair including descalling by using antiscallent solution passing through copper tube of condensor units, and disconnecting chiller unit from the system by taking out nuts, bolts, studs, valves and MS/GI pipe line from both side cover, cleaning each tube with nylon brush,flushing with alkaline solution,connecting back both side cover including replacingleather gasket 4 mm thick, scraping old paint and apply one coat of primer and two coat of enemel paint of chiller and condensor supply and return water pipe line by service colour coded and the direction of flow of fluids in pipes by arrow at regular intervals shall also be marked.
Make: Blue Star
Notes:
(a) AC plant servicing,, defects rectification , testing and commissioning shall be got carried out through the Authorised Service Technicians only by the contractor under his own arrangements and expenses.
(b) Cost of descaling chemicals, refrigerants, measured and paid for separately. | 8 | Each Job | 8,000 ₹64,000 | 3,500 ₹28,000 Lowest | 6,500 ₹52,000 | 5,233 ₹41,864 |
| 2.00 | All as per item No 1 here-in-before but 37 to 40 TR capacity. | 16 | Each Job | 8,500 ₹1,36,000 | 4,000 ₹64,000 Lowest | 6,500 ₹1,04,000 | 5,533 ₹88,528 |
| 3.00 | All as per item No 1 here-in-before but 50.2 TR capacity. | 3 | Each Job | 9,500 ₹28,500 | 4,500 ₹13,500 Lowest | 6,500 ₹19,500 | 5,823 ₹17,469 |
| 4.00 | S&F in replacement scroll compressor new factory made, as per existing, filled with compressor oil and charged with gas R-22/R-407C including testing, commissioning complete all as specified and as directed by Engineer-in-Charge. Make Danfoss, Model No. SM 185S4RC and SZ185S4RC , 3 phase 440V, pressure LP/HP side 25/27.5 bar or equivalent as per approval authority. Note:- Refrigerant charged shall be measured and paid for separately. | 2 | Each | 1,15,000 ₹2,30,000 | 1,30,000 ₹2,60,000 | 68,000 ₹1,36,000 Lowest | 1,15,233 ₹2,30,466 |
| 5.00 | M&L for disconnecting electrical connections motor located at the top of cooling tower,keep cables at safe custody for reconnection and dismantling and taking out fan blade assembly along with motor mounted on base frame at the top of cooling tower after cutting/dismentaling all nuts, bolts and fixtures from the mounting frame and removing whole assembly including motor and base frame from the top of cooling tower with the help of T&P for servicing of cooling tower suitable for 120/100 TR capcity including following complete:-
(i) Cleaning /scrapping of inner& outer surface of FRP basin, repair of damaged portion if any incuding FRP lining of all surfaces joints to avoid leakage including replacement of all nuts and bolts joining all parts of Basin complete.
(ii) servicing cooling tower plant through cleaning re-agent complete pipe line, including servicing of cooling tower motor and fan and make the necessary alignment with motor. (iii) gressing of cooling tower motor bearing.
(iv) taking out PVC fills blocks,replace with new one measure seprately .
(v) servicing of spray header and sprinkler assy complete.
(vi) repair of water strainer complete.
Note:- PVC corrugated Honeycomb double edge folded fills shall be measured and paid for separately | 3 | Each Job | 8,000 ₹24,000 | 2,000 ₹6,000 Lowest | 9,500 ₹28,500 | 5,223 ₹15,669 |
| 6.00 | All as per Item No 5 here-in-before but Cooling Tower of Capacity 80 to 50 TR. | 4 | Each Job | 6,000 ₹24,000 | 1,800 ₹7,200 Lowest | 9,200 ₹36,800 | 4,933 ₹19,732 |
| 7.00 | All as per Item No 5 here-in-before for Cooling Tower of Capacity 25 to 40 TR | 6 | Each Job | 4,500 ₹27,000 | 1,700 ₹10,200 Lowest | 9,200 ₹55,200 | 4,533 ₹27,198 |
| 8.00 | M&L for repair & servicing of Air Handling Unit of capacity 16000 to 15000 CFMrectify and repair the leakages,cleaning of condensor coil fins and air filter by using water zet presure pump, greasing of bearings, replace unserveciable fan belt and reassembling the same after complete repair/leakages with accessories as nust, bolts, washers etc installation on existing foundation coupling with existing electrical motor with proper alignment including testing, commissioning complete to the entire satisfaction of Engr-in-Charge.
Note- Fan belt measure & paid separately. | 4 | Each Job | 3,500 ₹14,000 | 3,000 ₹12,000 | 1,500 ₹6,000 Lowest | 8,533 ₹34,132 |
| 9.00 | All as per Item No 8 here-in-before but AHU of 14500 to 10000 CFM | 4 | Each Job | 2,000 ₹8,000 Lowest | 2,800 ₹11,200 | 2,000 ₹8,000 Lowest | 7,533 ₹30,132 |
| 10.00 | All as per Item No 8 here-in-before but AHU of 9000 to 7000 CFM | 10 | Each Job | 2,000 ₹20,000 Lowest | 2,600 ₹26,000 | 2,000 ₹20,000 Lowest | 6,533 ₹65,330 |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
16 Jul 2025, 6:00 pmClosed
CWE (AF) Jodhpur
HQ CWE AF JODHPUR Opp Mosam Vibhag Airforce Chauraha , Ratanada Jodhpur (Raj)-342011
REPAIR/ MAINTENANCE OF CENTRAL AC PLANTS AND CONNECTED WORKS AT AF STN PHALODI
2025_MES_715225_1
89086/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (AF) Phalodi
as per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Phalodi
₹66,000
Yes
26 Sept 2025
18 Jun 2025
18 Jul 2025
18 Jun 2025
16 Jul 2025
2 Jul 2025
Amount
M&L for servicing, repair/maint and pressure test of the condensor and cooling coil of Chiller Water cooled type central AC plant of 25 /26TR capacity and dismantling the same for repair including descalling by using antiscallent solution passing through copper tube of condensor units, and disconnecting chiller unit from the system by taking out nuts, bolts, studs, valves and MS/GI pipe line from both side cover, cleaning each tube with nylon brush,flushing with alkaline solution,connecting back both side cover including replacingleather gasket 4 mm thick, scraping old paint and apply one coat of primer and two coat of enemel paint of chiller and condensor supply and return water pipe line by service colour coded and the direction of flow of fluids in pipes by arrow at regular intervals shall also be marked. Make: Blue Star Notes: (a) AC plant servicing,, defects rectification , testing and commissioning shall be got carried out through the Authorised Service Technicians only by the contractor under his own arrangements and expenses. (b) Cost of descaling chemicals, refrigerants, measured and paid for separately.
All as per item No 1 here-in-before but 37 to 40 TR capacity.
All as per item No 1 here-in-before but 50.2 TR capacity.
S&F in replacement scroll compressor new factory made, as per existing, filled with compressor oil and charged with gas R-22/R-407C including testing, commissioning complete all as specified and as directed by Engineer-in-Charge. Make Danfoss, Model No. SM 185S4RC and SZ185S4RC , 3 phase 440V, pressure LP/HP side 25/27.5 bar or equivalent as per approval authority. Note:- Refrigerant charged shall be measured and paid for separately.
M&L for disconnecting electrical connections motor located at the top of cooling tower,keep cables at safe custody for reconnection and dismantling and taking out fan blade assembly along with motor mounted on base frame at the top of cooling tower after cutting/dismentaling all nuts, bolts and fixtures from the mounting frame and removing whole assembly including motor and base frame from the top of cooling tower with the help of T&P for servicing of cooling tower suitable for 120/100 TR capcity including following complete:- (i) Cleaning /scrapping of inner& outer surface of FRP basin, repair of damaged portion if any incuding FRP lining of all surfaces joints to avoid leakage including replacement of all nuts and bolts joining all parts of Basin complete. (ii) servicing cooling tower plant through cleaning re-agent complete pipe line, including servicing of cooling tower motor and fan and make the necessary alignment with motor. (iii) gressing of cooling tower motor bearing. (iv) taking out PVC fills blocks,replace with new one measure seprately . (v) servicing of spray header and sprinkler assy complete. (vi) repair of water strainer complete. Note:- PVC corrugated Honeycomb double edge folded fills shall be measured and paid for separately
All as per Item No 5 here-in-before but Cooling Tower of Capacity 80 to 50 TR.
All as per Item No 5 here-in-before for Cooling Tower of Capacity 25 to 40 TR
M&L for repair & servicing of Air Handling Unit of capacity 16000 to 15000 CFMrectify and repair the leakages,cleaning of condensor coil fins and air filter by using water zet presure pump, greasing of bearings, replace unserveciable fan belt and reassembling the same after complete repair/leakages with accessories as nust, bolts, washers etc installation on existing foundation coupling with existing electrical motor with proper alignment including testing, commissioning complete to the entire satisfaction of Engr-in-Charge. Note- Fan belt measure & paid separately.
All as per Item No 8 here-in-before but AHU of 14500 to 10000 CFM
All as per Item No 8 here-in-before but AHU of 9000 to 7000 CFM
All as per Item No 8 here-in-before but AHU of 6500 to 5000 CFM
All as per Item No 8 here-in-before but AHU 1600 to 4000 CFM
Supply only fan belt A & B Series any sizes for AHU 's as per site requiement complete all as specified and directed
S&F in replacement aluminium Fan blade set of 27"(inch) for cooling tower as per sample complete all as specified and directed.
All as per item no 14 here-in-before but 34'' (inch) for cooling tower as per sample complete all as specified and directed.
All as per item no 14 here-in-before but 53'' (inch) for AC plant cooling tower as per sample complete all as specified and directed.
All as per item no 14 here-in-before but 56''(inch) for cooling tower as per sample complete all as specified and directed.
S&F in replacement aluminium Sprinkler 3"(inch) dia 4 way with PVC pipe of suitable size for AC plant cooling tower as per sample complete all as specified and directed.
All as per item no 18 here-in-before but 4"(inch) dia 4 way with PVC pipe of suitable size for AC plant cooling tower as per sample complete all as specified and directed.
All as per item no 18 here-in-before but 5"(inch) dia 4 way with PVC pipe of suitable size for AC plant cooling tower as per sample complete all as specified and directed.
S&F in replacement PVC Drift Eliminator suitable for cooling tower of any TR capacity of any make as specified and directed.
S&F in replacement cooling Tower PVC Corrugated Honeycomb double Edge Folded Fills for cooling Tower Size 600x300x150x0.175 mm. Corrugation depth 12 mm No of Layers - 12 Nos, Weight ~ 750 GM.complete all as specified and directed.
M&L for Taking down and servicing of Monoblock pump and motor (Horizontal Type) Upto10 HP capacity, 3 phase, 415 V of central air conditioning plant, dismantling the pump scraping complete old paint ,apply one coat of primer than apply two coat enamel paint, including replacement of bearings,impeler, gland packings and mechanical water seal as per manufacturer's specifications, greasing, servicing, reassembling complete and refitting at site complete all as specified and directed by Engineer-in-charge Note- Supply only of bearing , impeller and mechanical water seal will be measured and paid under relevent item of work.
supply only Shaft ball bearing SS as per existing specifications.
Supply only Impeller with key as per existing specifications.
supply only Mechanical Water seal as per existing specifications.
M & L for repairing /Disconnecting the electrical and mechanical connection of burnt electrical motors from the site / location, transporting to and from to work shop. Rewinding of electrical motors/ pump motors by dismantling and removing the burnt cut copper winding wire cleaning the slots of stator with petrol and brushes winding polyster based super enamelled copper wire of same gauge of original one with proper class of insulation including varnishing and heating the coil and remove air bubbles complete stator / roter after rewinding reassembling all parts including reinstalling connection to original position and testing on full load all as directed by Engineer in charge for capacity of 10 HP motor
ditto as item no 27 but of capacity 7.5 HP
ditto as item no 27 but of capacity 5.0 HP
S&F in replacement 125 mm dia cast iron Butter fly valve PN 1.6 with stainless steel disc lever insulated as per piping complete for all as directed by Engineer in Charge .
S&F in replacement 100 mm dia cast iron Butter fly valve PN 1.6 with stainless steel disc lever insulated as per piping complete for all as directed by Engineer in Charge .
S&F in replacement 80 mm dia cast iron Butter fly valve PN 1.6 with stainless steel disc lever insulated as per piping complete for all as directed by Engineer in Charge .
S&F in replacement 50 mm dia cast iron Butter fly valve PN 1.6 with stainless steel disc lever insulated as per piping ISI Marked complete all as specified and directed.
S&F in replacement of single phasing preventor complete all as specified and directed. Make : Minilec(VSP-2), L&T, Siemens or equivalent as per approval authority.
S&F in replacement contactor 3 pole with AC Coil 18 Amps 415 Volts fixed in existing panel complete all as specified and directed.
S&F for replacement of contactor 3 pole with AC Coil 25 Amps 415 Volts fixed in existing panel complete all as specified and directed.
S&F in replacement contactor 3 pole with AC Coil 32 Amps 415 Volts fixed in existing panel complete all as specified and directed.
S&F in replacement contactor 3 pole with AC Coil 40 Amps 415 Volts fixed in existing panel complete all as specified and directed.
S&F in replacement contactor 3 pole with AC Coil 115 Amp 415 Volts fixed in existing panel complete all as specified and directed.
S&F in replacement thermal overload relay (Auto/Manual Reset) setting range 7 to 10 Amps, power rating for 3 phase motor at 415V fixed in existing panel complete for all as specified and directed.
S&F in replacement thermal overload relay (Auto/Manual Reset) setting range 10 to 13 Amps, power rating for 3 phase motor at 415V fixed in existing panel complete all as specified and directed by Engineer in Charge
S&F in replacement thermal overload relay (Auto/Manual Reset) setting range 13 to 18 Amps, power rating for 3 phase motor at 415 V fixed in existing panel complete for all as directed by Engineer in Charge
S&F in replacement thermal overload relay (Auto/Manual Reset) setting range 18 to 25 Amps, power rating for 3 phase motor at 415V fixed in existing panel complete all as speified and directed.
Supply and fix in replacement of water presuure gauge analoge type 0-7 kg / cm2 and 100 psi complete all as specified and directed
S&F in replacement of thermometer to condenser/chiller, inlet or outlet water pipes including addition alteration to pipe line for fixing thermometer Range 0-100 degree F / degree centigrade complete all as specified and directed
Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of three poles 25 to 63 Amp fixed in the DB/panel complete with connection testing and commissioning.
S&F in replacement Multicore round PVC insulated and FRLSH PVC round sheathed copper conductor (Flexible) industrial cable 1100Volts 4 Sqmm 3 core complete all as specified and directed. Make: Havells/Finolex/Polycab
S&F in replacement Multicore round PVC insulated and FRLSH PVC round sheathed copper conductor (Flexible) industrial cable 1100Volts 6 Sqmm 3 core complete all as specified and directed. Make: Havells/Finolex/Polycab or equivalent as given in Appendix B
S&F in replacement Multicore round PVC insulated and FRLSH PVC round sheathed copper conductor (Flexible) industrial cable 1100Volts 10 Sqmm 3 core complete all as specified and directed. Make: Havells/Finolex/Polycab or equivalent as given in Appendix B
S&F in replacement chiller plants PCB suitable for 26 to 50 TR capacity of existing model complete all as specified and directed. Make: Blue Star, Model: Micro Processor Control/ SP-DX-2C WC/3C WC/4C WC, CH12V4 & DXCPU1 or equivalent as per approval authority
Material & Labour for finding out the leakage with the pressure test of water chiller scroll type capacity up to 50 TR AC plant , identifing gas and oil leakage and removing the same and Leak repairing by brazing/flaring and flushing the sysytem by nitrogen gas and pressure testing for leakage and after rectification vacumacation, pressure testing, and gas charging R-407c / R-22 for achieve desire pressure and testing complete to the entire satisfaction of Engineer-in-Charge. Note :- Gas charging required shall be measured and paid separately.
Supply and fill Refrigerant R-407 C complete all as specified and directed. Note:- :Empty/filled Ref gas cylinder shall be the responsibility of contractor and he shall be liable for all risk against the same and all costs deemed to be included in the quoted rate.
Supply and fill Refrigerant R-22 complete all as specified and directed. Note:- :Empty/filled Ref gas cylinder shall be the responsibility of contractor and he shall be liable for all risk against the same and all costs deemed to be included in the quoted rate.
S&F in replacement filter drier DFP-023Z0014 DCL 305 suitable for centaral Ac plant water cooled capacity 25 to 50 TR complete all as existing specified and directed.
S&F in replacement Thermostatic Expansion valve suitable for AC plant complete all as existing specified and directed. Make : Danfoss or Equivalent
S&F in replacement temperature sensors suitable for Ac plant complete all as existing specified and directed.
S&F in replacement compressor crank case heater (CCH) suitable for Ac plant complete all as existing specified and directed.
Supply and fill in condensor,cooling tower,chiller descaling chemical suitable for AC Plant complete all as specified and directed.
Supply and fill compressor oil suitable for AC Plant complete all as specified and directed.
S&F in replacement 80mm dia CI Y Strainer flanged end epoxy coated with SS Screen complete all as specified and directed. Make : Honeywell or equivalent ISI Marked
S&F in replacement 100mm dia CI Y Strainer flanged end epoxy coated with SS Screen complete all as specified and directed. Make : Honeywell or equivalent ISI Marked
M&L of Servicing of package type air cooled AC plant of capacity 8.5 TR including cleaning condenser and cooling coil with water Zet pressure pump to remove the impurities dust and foreign materials, cleaning of filters of suspended indoor unit, refixing the same after complete repair/servcing and Carry out check necessary brazing work to copper tubing and charging the refrigerant as per existing/NON-CFC class complete installed at Station Logistic Section all as specified and as directed by Engineer-in-Charge. (Note:-Gas for charging shall be measured and paid for separately)
S & F in replacement Damper Actuators - NON Spring Return Type Actuators Floating control, Model Number: CN4634A1001 34Nm,230V, IP54 Protection. Make: Honeywell or or equivalent as per approval authority
M & L for servicing of Air Curtain 1 phase, 240 Volts, 50 Hz, 5 m throw range vertically downstream, velocity 12 to 18 m/sec - disconnect electric connection and minor repairs of burnt electric items, cleaning of blower, greasing blower motor bearings, refixing same all as specified and directed by Engr-in-Charge.
Supply,installation and testing Cooling Tower motor flange base 3 HP, 920 rpm, three phase squirrel cage induction electric motor complete all as specified and directed.
Supply,installation and testing Cooling Tower motor flange base 5 HP, 920 rpm, three phase squirrel cage induction electric motor complete all as specified and directed.
M&L for providing and installing FRP inducted draught counter flow bottle shape cooling tower body of capacity 80 TR including riser pipe of suitable size by taking down unserviceable body and fitting new one properly in position including connection of riser pipe with condenser water pipeline either with fittings or welding and sealing properly, providing anti vibration padding complete all as specified and as directed. Specification of cooling tower are as below: 1) Water Flow rate : 750 LPM 2) Hot water temp : 37◦c 3) Cold water temp : 32◦c 4) wet bulb temp : 28◦c
M&L for masonary foundation with cement concrete footing in second class brick work and cement mortar 1:6 for cooling tower of capacity 80 TR including by demolishing the existing foundation complete all as specified and as directed.
Supply and fixing in replacement Y-strainer stain less steel mesh of any size by dismantling y-strainer and removing old mesh and fitting new one complete all as specified and as directed
supply and fixing PVC mesh for dust/dirt prevention suitable for cooling tower of capacity 50 to 100 TR by taking down unserviceable mesh and fixing new one properly using nuts&bolts/ fasteners in position complete all as specified and as directed.
S & F in replacement HMI(Display of chiller controller) of chiller conrol panel including wiring of HMI to chiller controller complete all as specified and as directed. Make : Blue star or equivalent as per approval authority
M & L for painting to LT panel body of any size including scrapping old paint and applying two coats of enemal paint by using synthetic enamel paint over a coat of red oxide primer all as specified and directed by Enginner-in-charge.
M & L for complete duct cleaning of AC plant 25 to 100 TR supply and return air duct by using air compressor and vaccume cleaning material and latest advance technology complete all as specified and directed.
M & L repair to chiller and condensor water pipe cement plaster insulation including replacement of thermocol isulation and wire mesh complete all as specified and directed.
Supply, fixing and taking down HVAC duct air diffuser made aluminium powder coted sqare shape size 2x2 ft all as specified and directed.
S&F,taking down HVAC AHU air filter Grade- G4,EU grade- EU4, 50 mm thick washable HDPE 90% down 10 micron Pre-Filters, AHU pre filter having HDPE media with aluminium / GI frame,Efficiency and arrestance 90% size of filter 2x2 ft all as specified and directed.
S&F,taking down HVAC AHU air filter Grade- G4,EU grade- EU4,50 mm thick washable HDPE 90% down 10 micron Pre-Filters, AHU pre filter having HDPE media with aluminium / GI frame, Efficiency and arrestance 90% size of filter 2x1 ft all as specified and directed.
S&F,taking down HVAC AHU air filter Grade- G4,EU grade- EU4, 50 mm thick washable HDPE 90% down 10 micron Pre-Filters, AHU pre filter having HDPE media with aluminium / GI frame Efficiency and arrestance 90% size of filter 1x1 ft all as specified and directed.
Supply,fixing and taking down of MCCB 100 Amps, 25 KA 4 pole 415 volt fixed in existing Panel complete all as specified.
Supply,fixing and taking down of MCCB 125 Amps, 25 KA 4 pole 415 volt fixed in existing Panel complete all as specified.
Supply, laying , testing & taking down of PVC insulated FRLS,PVC sheathed multi core copper conductor un armoured electric control cable (heavy duty)with stranded copper condutor of size 35 sqmm, 4 core ,1100 volts grade complete all as specified and directed.
S&f , taking down of PVC insulated FRLS,PVC sheathed multistrand copper conductor un armoured electric control cable (heavy duty)with stranded copper condutor of size 25 sqmm, 4 core ,1100 volts grade complete all as specified and directed.
S & F in renewal of self adhesive nitrile rubber insulation sheet with silver foil coated (5mm thick) for duct insulating complete all as specified and directed.
L C ASSOCIATES (BID ID -3360600)
star electricals (BID ID -3360574)
M/S HARIOM CONSTRUCTION COMPANY (BID ID -3361274)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .