REPAIR/MAINT AND POLISHING TO CERTAIN ITEMS OF WOODEN FURNITURE AT MIL STN PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Chair Easy FD-1108/229 S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed. (a) Rear leg

(b) Front leg

(c) Arms

(d) Rear/front/Side rail duly made holes for caning as per drg of seat as to match with the existing, made of Teak wood all as specified and directed

Recanning seat & back in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.

M & L for fixing of PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the legs of Chair Easy as specified & directed by Engr-in-charge

M&L preparation of old wood surfaces of Chair Easy by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge

Chair Writing/Chair CB Office with Arms FD-202/ 250/280 S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed. (a) Rear leg

(b) Front leg

(c) Rear/front/Side rail duly made holes for caning as per drg

(d) Arms.

(e) Back rest

(f) Stiffener

(g) S & F recanning seat & back of the chair and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.

M & L for fixing of PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the legs of Chair Easy as specified & directed by Engr-in-charge.

M&L preparation of old wood surfaces of Chair Writing by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge.

Chair Dining PBOR (FD/MAP-II/05) S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed. (a) Front leg

b) Rear legs

c) Front/rear rail .

d) Side rail.

e) Stiffener.

f) Taking out and removing old U/S worn out plastic sheet and S & F new PVC Plastic sheets fixing of Bottom of plastic sheets

S & F new 25x3 mm flat iron in (two nos in each chair) 38cm Long to the bottom base of PVC seat for the durability of PVC Seat complete all as specified and directed.

M & L for fixing of PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the legs of Chair Easy as specified & directed by Engr-in-charge.

M&L preparation of old wood surfaces of Chair Dining PBOR by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge.

Trolley for TV ( FD/E6/MAP/04 (R)) a) Removing of old unserviceable 18 mm prelaminated particle board and S&F new prelaminated MDF board 18mm thick, pre-laminated particel board (three sides & top with edge of top moulded as shown in drg

b) Removing of old unserviceable 5.5 mm thick openable unserviceable glass shutter with unserviceable magnetic catcher and S&F new glass shutter with magnetic catcher on fron side as per drawings.

c) Removing of old unserviceable existing castores wheels and supply and fix new castores wheels as per drawing.

Dressing Mirror Gents (FD/E6/MAP/16 ) a) Removing of old broken Looking Mirror from Dressing Mirror Gents & S&F New Looking Mirror, 5mm thick for Dressing Mirror Gents as shown in drawing with 4mm thick 1st class hard wood teak beading all around the Mirror with suitable size of screws Complete all as shown in drgs & as directed Make of Atul/Saint Gobain/Swastik.

b) Removing of old broken shelves of Dressing Mirror Gents of 5mm thick plain glass including aluminium brackets and S&F new shelves with aluminium brackets for holding the shelves all as shown in drgs and as directed.

M&L preparation of old wood surfaces of Dressing Mirror Gents MAP by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge

Table Dressing Ladies with Mirror & Cushioned Stool ( FD/MAP-II/07) a) Removing of old broken unserviceable existing Looking Mirror from Table dressing Ladies and S&F New Looking Mirror of 5 mm thick for Table Dressing Ladies all as shown in drgs and as directed. Make of Mirror shall be Atul/Saint Gobain/Swastik.

b) Removing of old broken unserviceable existing heavy duty revolving nylon double wheels from stool cushioned and S&F new heavy duty revolving nylon double wheels in stool cushioned all as shown in drgs and as directed

c) Removing of old broken unserviceable existing top and cushioned seat of the stool and supply and fix new top 12mm thick BWP plywood openable and Cushioned Seat as shown in drg. The seat of the stool shall be 75mm high ,made of foam 40 density covered with tapestry cloth as approved by Engr-In-charge/GE.

d) Removing of old u/s sides of the cushioned Stool and S&F new sides as all as shown in drgs and as directed by Engr in Charge.

e) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.

Table Dining 06/8 Person (Officer)(FD/E6/MAP-II/03) a) Removing of old unserviceable existing top of table & S&F new top of 18 mm thick of size as shown in drawing, made out of pre laminated MDF board, one side teak finish decorated exterior grade and other side white top fixed with suitable size of screws Complete all as shown in drgs and as directed.

b) Removing of old UNSV front/rear rail of Table Dining and S&F new front/rear rail as per existing shape & size made out of Ist class hard wood Teak duly Melamine polished to match the existing surface glossy finish complete all as specified and as directed and shown on drg.

c) All as per item No 7.00 (a) above but side rail of Table Dining. Complete all as shown and directed.

d) All as per item No 7.00 (a) above but legs of Table Dining.

S&F in repairs Triangular wooden bracket 100X100X20mm thick between leg & rail for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge

M&L preparation of old wood surfaces of Table Dining officer MAP by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge

Table Dining 1200x900x760mm(FD/E6/MAP-II/03) a) Removing of old unserviceable existing top of table & S&F new top of 18 mm thick of size as shown in drawing, pre laminated MDF board, one side teak finish decorated exterior grade and other side white the top fixed with suitable size of screws Complete all as shown in drgs and as directed.

b) Removing of old UNSV front/rear rail of Table Dining and S&F new front/rear rail as per existing shape & size made out of Ist class hard wood Teak duly Melamine polished to match the existing surface glossy finish complete all as specified and as directed and shown on drg.

c) All as per item No 8.00 (a) above but side rail of Table Dining complete all as shown and directed.

d) All as per item No 8.00 (a) above but legs of Table Dining.

S&F in repairs Triangular wooden bracket 100X100X20mm thick between leg & rail for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge.

M&L preparation of old wood surfaces of Table Dining 1200x900x760 mm MAP by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge

Table Peg (FD- 277 & 236/384) S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (Rear/front)

(c) Stiffners

(d) Replacement of existing unserviceable table top for Table peg made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge.

M & L for fixing of PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the legs of Chair Easy as specified & directed by Engr-in-charge

M&L preparation of old wood surfaces of Table Peg by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge

Sofa sets 4/5 seats FD-281 S&F New components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed. (a) Front Legs

(b) Rear legs

(c) Batterns

(d) Back rail (3 seater)

(e) Front rail (3 seater)

(f) Back rail (single seater)

(g) Front rail (single seater)

(h) Hand rest

(j) Providing new cushion of 40 densityPU foam of size 560 x 530x100mm thick complete of Make- Sleepwell, Model-Primo Cool/Godrej, all as specified and as directed.

(k) Providing new tapestry cloth cover for seat foam and back foam of sofa sets of approved shade & quality to cover the foam of size 560 x 530x100mm thick complete all specified and as directed. Note: Cost of tapestry cloth shall not be less than Rs. 350/- per metre.

M&L preparation of old wood surfaces of Sofa set 4 seater by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge (i) Sofa set 4 seater

M&L preparation of old wood surfaces of Sofa set 5 seater by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge (ii) Sofa set 5 seater

Chair Dinning Cushioned FD/E6/MAP/10 (R)& Long back TP S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed. (a) Rear leg duly curved as per existing leg

(b) Front leg

(c) Side/back/front rails

(d) Stiffener/duly Curved back rests as per exisitng drg

(e) Providing new Cushion of appropriate size of 40 density PU foam complete with dismantling old one as per sample held with GE Make- Sleepwell, Model-Primo Cool/Godrej.

(f) New tapestry cloth cover for cushion of approved shade & quality as per sample held with GE to cover the foam of appropriate size and dismantling old one. Note: Cost of tapestry cloth shall not be less than Rs. 250/- per metre.

M & L for fixing of PVC shoesnylon buffers superior quality of 25mmx25mm dia with 30mm long screws in the legs of Chair Easy as specified & directed by Engr-in-charge

(g) Material and Labour for high glossy melamine polishing in walnut shade of wooden furniture surfaces of Chair Dinning Cushioned duly removed the old surfaces with sand/emery paper removing the stains rectifying cracks and dents with filling materials like bees wax, chalk powder etc mixed with melamine polish (one or more coats as required), finish shall be uniform texture highly glossy.

Bed Plywood Top (FD-245 & 246) S&F new components comprising of following outer member made of Teak Wood , covered both sides of board with 3.5 mm thick OST plywood with 12mm thick half cut teak wood beading including dismantling unservicable one all as specified and as directed. (a) Head board

(b) Foot board

S&F new components of 1st class HW (Teak Wood) including dismantling unservicable one all as specified and as directed. (a) Long rail of size 90 x 35 mm

(b) Stiffner of size 60 x 40 mm

(c) Wooden bracket

(d) Removing of old U/S and broken existing 12mm thick commercial plywood from Bed Hard PlyTop and supply and fix new 12mm thick BWP plywood as per existing shape and size of Make- Archidply (Classic Marine 710) /Century Ply (Bond 710)/Greenply (Gold 710) fixed to Bed Hard PlyTop with suitable size of steel nut & bolt with washer rest all as per drg and as directed.

(e) Material and Labour for high glossy melamine polishing in walnut shade of wooden furniture surfaces of Bed Hard P/Top duly removed the old surfaces with sand/emery paper removing the stains rectifying cracks and dents with filling materials like bees wax, chalk powder etc mixed with melamine polish (one or more coats as required), finish shall be uniform texture highly glossy complete all as specified & directed.

Table Dining for 08 persons FD-30(M)/ 273 & 239 S&F new components of 1st class HW (Teak Wood) including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) Replacement of existing unserviceable table top for Table dining 8 pers made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohogini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs Triangular wooden bracket 100X100X20mm thick between leg & rail for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge.

Material and Labour for high glossy melamine polishing in walnut shade of wooden furniture surfaces of Table dining 8 pers duly removed the old surfaces with sand/emery paper removing the stains rectifying cracks and dents with filling materials like bees wax, chalk powder etc mixed with melamine polish (one or more coats as required), finish shall be uniform texture highly gloss complete all as specified & directed.

Table dining for 06 persons FD-30(M)/ 273 & 239 S&F new components of 1st class HW (Teak Wood) including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d)Replacement of existing unserviceable table top for Table dining 6 pers made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs Triangular wooden bracket 100X100X20mm thick between leg & rail for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge.

(e) Material and Labour for high glossy melamine polishing in walnut shade of wooden furniture surfaces of Table dining 6 pers duly removed the old surfaces with sand/emery paper removing the stains rectifying cracks and dents with filling materials like bees wax, chalk powder etc mixed with melamine polish (one or more coats as required), finish shall be uniform texture highly gloss complete all as specified & directed .

Teapoy (FD-382/ 232 & 278) S&F new components of 1st class HW (Teak Wood) including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d)Replacement of existing unserviceable table top for Teapoy made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge.

(e) Material and Labour for high glossy melamine polishing in walnut shade of wooden furniture surfaces of Teapoy duly removed the old surfaces with sand/emery paper removing the stains rectifying cracks and dents with filling materials like bees wax, chalk powder etc mixed with melamine polish (one or more coats as required), finish shall be uniform texture highly gloss complete all as specified & directed.

Table Centre (FD-274 & 235) S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d)Replacement of existing unserviceable table top for Table Centre made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge.

M & L for fixing of PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the legs of Chair Easy as specified & directed by Engr-in-charge

(e) Material and Labour for high glossy melamine polishing in walnut shade of wooden furniture surfaces of Table Centre duly removed the old surfaces with sand/emery paper removing the stains rectifying cracks and dents with filling materials like bees wax, chalk powder etc mixed with melamine polish (one or more coats as required), finish shall be uniform texture highly gloss complete all as specified & directed.

Chair Dining FD-1105/279/203/228 S&F new components of 1st class HW (Teak) including dismantling unservicable one complete all as shown in drgs and as directed by Engr-in-Charge. all as specified and as directed. (a) Rear leg

(b) Front leg

(c) Rear/front/side rail

(d) Stiffener

(e) Back rest

(f) S & F recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.

M & L for fixing of PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the legs of Chair Easy as specified & directed by Engr-in-charge

Material and Labour for high glossy melamine polishing in walnut shade of wooden furniture surfaces of Chair Dining duly removed the old surfaces with sand/emery paper removing the stains rectifying cracks and dents with filling materials like bees wax, chalk powder etc mixed with melamine polish (one or more coats as required), finish shall be uniform texture highly gloss complete all as specified & directed.

Table 900 x 600 mm with/ without drawer FD- 223 & 224 S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) Replacement of existing unserviceable table top for Table 900x600 mm made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge.

(e) Drawer made out of 12 mm thick BWP Plywood and front side of 18 mm thick prelaminated MDF board both side laminated having one side teak finish and other side balancing white. Including provision of brass Knob complete all as specified and directed.

S&F in repairs Triangular wooden bracket 100X100X20mm thick between leg & rail for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge.

M&L preparation of old wood surfaces of Table 900x600 mm by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge

Table 900 x 900 x 760 mm FD-273 S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(d) Replacement of existing unserviceable table top for Table 900x900 mm made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs Triangular wooden bracket 100X100X20mm thick between leg & rail for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge.

(f) M&L preparation of old wood surfaces of Table 900x900 mm by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge.

Side board FD-372 (a) S & F door shutter made of 18/19mm thick Pre-laminated MDF board exterior grade duly providing 6mm thick teak wood beading all round with fittings and fixtures including dismantling unserviceable one all as specified and as directed. Note :- (i) Knob shall be made of Brass. (ii) Hinges shall be 50 mm of approved quality.

(b) Front portion of the drawer as to match with the existing made out of 18mm thick Pre-laminated particle board with laminated finish and knob including dismantling unserviceable one all as specified and as directed.

(c) New top made out of 18/19mm thick Pre-laminated MDF board with laminated finish duly providing 4mm thick teak wood beading all round including dismantling unserviceable one all as specified and as directed.

(d) 3.5mm thick one side teak face plywood on sides including dismantling unserviceable one all as specified and as directed.

(e) Back made out of 8 mm thick BWP ply wood including dismantling unserviceable one all as specified and as directed.

(f) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.

Table writing FD-249 & 275 (a) Replacement of existing unserviceable table top for Table writing made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge.

S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed. (b) Leg

(c) Leg (short)

(d) Side/bottom rail

(e) Back made out of 6 mm thick BWP plywood including dismantling unserviceable one all as specified and as directed.

(f) Side made out of 18/19 mm thick MDF board one side laminated finish including dismantling unserviceable one all as specified and as directed

(g) Stiffner

(h) Drawer made out of 18/19 mm thick MDF board one side laminated finish including provision of knob including dismantling unserviceable one all as specified and as directed. Note :- Knob shall be Brass of approved size and quality

(j) Complete cupboard from the table writing and made of 18 mm thick pre-laminated MDF board including back provided with 6mm thick commercial plywood including dismantling unserviceable one all as specified and as directed. Note :- (i) Knob shall be Brass of approved size & quality. (ii) Hinges shall be 50 mm of approved quality.

(k) M&L preparation of old wood surfaces of Table writing by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge.

Table Dressing Gents with mirror FD-230 (a) Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror and minor repairs including dismantling unserviceable one all as specified and as directNote : Make of Mirror should be of Modiguard/ST Gobain / Atul

(b) Drawer made of 12mm thick BWP plywood and front side made of 18mm thick pre-laminated particle board one side laminated finish and provision of knob including dismantling unserviceable one all as specified and as directed.

(c) M&L preparation of old wood surfaces of Table dressing gents with mirror by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge.

Table Dressing Ladies with mirror FD-251 (a) Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror and minor repairs including dismantling unserviceable one all as specified and as directed.Note : Make of Mirror should be of Modiguard/St Gobain

(b) Drawer made of 12mm thick BWP plywood and front side made of 18/19mm thick pre-laminated particle board one side laminated finish and provision of knob including dismantling unserviceable one all as specified and as directed.

(c) M&L preparation of old wood surfaces of Table dressing ladies with mirror by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge.

Locker Bed Side FD-54(M) (a) CP Handle 100mm of standard quality including dismantling unserviceable one all as specified and as directed.

(b) Hasp & Stapple of standard quality including dismantling unserviceable one all as specified and as directed.

(c) S&F 3.5/4mm thick Teak Face plywood to Top and both sides including dismantling unserviceable one all as specified and as directed.

(d) Partition made of 18/19mm thick shisham wood planks (not more than 3 pieces) including dismantling unserviceable one all as specified and as directed.

(e) Shelf made of 18mm thick shisham wood planks including dismantling unserviceable one all as specified and as directed.

(f) S& F 18/19mm thick prelaminated particle board on front side of the doors (both) including dismantling unserviceable one all as specified and as directed.

(g) M&L preparation of old wood surfaces of Locker Bed Side with mirror by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge.

Stool Dressing CB (FD-252/374) S&F new components of 1st class HW (Teak Wood) including dismantling unservicable one Complete all as shown in drgs and as directed by Engr-in-Charge. (a) legs

(b) Stiffeners rail.

(c) Side rail duly drilled holes for caning as per drg.

(d) S & F recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.

M & L for fixing of PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the legs of Chair Easy as specified & directed by Engr-in-charge

M&L preparation of old wood surfaces of Stool dressing with mirror by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge.

Table Bed Side (FD-248/210/276/157) S&F new components of S&F new components of 1st class HW (Teak wood) or 18/19mm thick prelaminated MDF board as shown in drg and as directed by Engr-in-Charge including dismantling unservicable one. (a) Top

(b) Sides

(c) Shelves

(d) M&L preparation of old wood surfaces of Table bed side with mirror by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge.

Hat Stand with Mirror (FD- 206 /233 ) S&F new components of 1st class HW (Teak Wood) or 04mm thick plywood commercial as shown in drg and as directed by Engr-in-Charge including dismantling unservicable one. (a) Looking Mirror of 5 mm thick. (Make Modiguard/Saint Gobain/Atul)

(b) Brass hooks for hanging the Hat Stand as per drawing.

(c) M&L preparation of old wood surfaces of Hat stand w/mirror with mirror by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge.

Bin Soiled Linen (FD- 244/ DB-4073 ) S&F new components of 18 mm thick BWP Plywood one side teak face as shown in drg and as directed by Engr-in-Charge including dismantling unservicable one. (a) Top

(b) Unsv existing 3.5mm/4mm one side teak face ply wood of back side

(c) S & F recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.

(d) M&L preparation of old wood surfaces of Bin Soiled Linen with mirror by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge.

Chair Wooden Bottom (FD-285 ) S&F new components of 1st class HW (Teak Wood) as shown in drg and as directed by Engr-in-Charge including dismantling unservicable one. (a) Front Legs

(b) Rear Legs

(c) Stiffeners

(d) Seat (08 mm BWP Plywood)

M & L for fixing of PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the legs of Chair Easy as specified & directed by Engr-in-charge

M&L preparation of old wood surfaces of Chair wooden bottom by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge.

Charpoy Wooden (FD -56/227) S&F new components of 1st class HW (Saal) as shown in drg and as directed by Engr-in-Charge including dismantling unservicable one. (a) Long Rails

(b) Short Rails

(c) 12mm thick Commercial Plywood BWR

(d) Legs

(e) M&L preparation of old wood surfaces of Charpoy wooden by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge.

TSR Wooden (FD-86M)) S&F new components of 1st class HW (Saal) as shown in drg and as directed by Engr-in-Charge including dismantling unservicable one. (a) Long Rails

(b) Short Rails

(d) Legs

(e) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coats of black synthetic enamel paint Complete all as shown in drgs and as directed.

Bin Linen Multipurpose (FD/E6/MAP/09) (a) S & F door shutter made of 18 mm thick Pre-laminated MDF board exterior grade duly providing 6mm thick teak wood beading all round with fittings and fixtures including dismantling unserviceable one all as specified and as directed. Note :- (i) Knob shall be brass of approved size & quality). (ii) Hinges shall be 50 mm of approved quality.

(b) Front portion of the drawer as to match with the existing shade made out of 18mm thick Pre-laminated MDF board with laminated finish and brass knob including dismantling unserviceable one all as specified and as directed.

(c) New top made out of 18/19mm thick Pre-laminated MDF board having 1.5 mm thick PVC beading all around as to match with the existing shade including dismantling unserviceable one all as specified and as directed.

(d) Removing of old unserviceable telescopy channel and S & F New telescopy channel of Make-Ebbco/Hettich/Rinox for smooth movement of the drawer.

(e) Back made out of 08 mm thick BWP plywood including dismantling unserviceable one all as specified and as directed.

(f) M&L preparation of old wood surfaces of Bin linen Multipurpose by scraping/removing old polish complete and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut/teak Color irrespective of drawing complete all as specified on drawing or as directed by Engineer-in-charge.

Table 1520x860x760 mm (Wooden) S&F new components of 1st class HW (Teak Wood) including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) Replacement of existing unserviceable table top for Table 1520x860x860 mm made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohogini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs Triangular wooden bracket 100X100X20mm thick between leg & rail for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge.

Material and Labour for high glossy melamine polishing in walnut shade of wooden furniture surfaces of Table 1520x860x860 mm duly removed the old surfaces with sand/emery paper removing the stains rectifying cracks and dents with filling materials like bees wax, chalk powder etc mixed with melamine polish (one or more coats as required), finish shall be uniform texture highly gloss complete all as specified & directed .

m/s MD pandey sons