REPAIR/REPLACEMENT OF INTERNAL ELECTRIFICATION FOR, GEYSERS, EXHAUST FANS, CEILING FANS AND POINT WIRING ALONGWITH ALLIED WORKS LOWER GARRISON UNDER AGE E/M YOL AT MIL STN YOL

Amount

Taking down carefully the existing aluminium/copper point wiring of any size and capacity and type by disconnecting from the either terminals complete including fittings and fixtures such as switches, sockets, ceiling rose, fan regulators, lamp holders, call bell, bell pushes any type etc by unscrewing and taken away from site complete and make good the disturbed surface as existing complete all as specified.

Taking down sheet metal enclosure DBs, etc and making good distrubed surface to match with existing surface complete all as specified.

Point wiring with 1.5 sqmm (Nominal Area) FRLS PVC insulated unsheathed multi stranded copper conductor, 1100 Volts grade, in and including concealed PVC conduit (ISI marked) with accessories such as bends, cross, elbow, tees etc. of suitable size including concealed MS pressed steel (Modular sunken box) terminal box not less than 1.6 mm thick for mounting switches, sockets, fan regulators etc and Modular cover plate as top cover (ISI marked) including continuous earth wire FRLS PVC insulated unsheathed 1.5 Sqmm (nominal area) copper multistranded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for one light point/Exhaust fan point controlled by one switch Note : i)Wiring Colour code i.e. Red/Yellow/Blue for Phase, Black for neutral and Green for earth shall be maintained. ii) Rate of cutting chases, cement plaster, white wash and making surface good as existing surface included in quoted rate. iii) Rate of modular switch and sockets will be paid seperately under relevant item.

All as per srl item No 3 above but for 3 pin 5 Amp socket outlet on same board with 1.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 1.5 Sqmm multi standard insulated unsheathed copper wire for continuos earth on same board complete all as specified.

All as per srl item No 3 above but for 3 pin 5 Amp socket outlet on independant board with 1.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 1.5 Sqmm multi standard insulated unsheathed copper wire for continuos earth on independent board complete all as specified.

All as per srl item No 3 above but for 3 pin 15 Amp socket outlet on independant board with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continuos earth on independent board complete all as specified.

All as per srl item No 3 above but for one light point controlled by two 2 -way switches complete all as specified.

Point wiring with 1.5 sqmm (Nominal Area) FRLS PVC insulated unsheathed multi stranded copper conductor, 1100 Volts grade, in and including PVC casing capping/conduit (ISI marked) with accessories such as bends, cross, elbow, tees etc. of suitable size including PVC junction box /MS pressed steel cadmium plated terminal box not less than 1.6 mm thick for mounting switches, sockets, fan regulators etc and 3 mm thick laminated hylam sheet top cover (ISI marked) including continuous earth wire FRLS PVC insulated unsheathed 1.5 Sqmm (nominal area) copper multistranded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for one light point/ fan point controlled by one switch Note : i) Wiring Colour code i.e. Red/Yellow/Blue for Phase, Black for neutral and Green for earth shall be maintained. ii) Chase cutting if required shall be measured and paid separately under relevant items in this schedule.

All as per srl item No 8 above but for 3 pin 5 amps socket outlet on same board with 1.5 sqmm PVC copper conductor (FRLS) cable and PVC insulated, unsheathed 1.5 sqmm stranded copper conductor cable as continous earth wire, all as specified.

All as per srl item No 8 above but for 3 pin 5 amps socket outlet on independent board with 1.5 sqmm PVC copper conductor (FRLS) cable and PVC insulated, unsheathed 1.5 sqmm stranded copper conductor cable as continous earth wire, all as specified.

All as per srl item No 8 above but for 3 pin 15 amps socket outlet on independent board with 2.5 sqmm PVC copper conductor (FRLS) cable and PVC insulated, unsheathed 2.5 sqmm stranded copper conductor cable as continous earth wire, all as specified.

All as per srl item No 8 above but for one light point controlled by two 2 -way switches all as specified.

Modular Switch one way 6 Amp, one module 230 Volts complete all as specified.

Modular Switch one way 16 Amp, one module 230 Volts complete all as specified.

Modular Switch piano flush type two way 6 Amp, one module 230 Volts complete all as specified.

Modular socket 6 Amp 3 Pin, two module 230 Volts complete all as specified.

Modular socket 6/16 Amp 3 Pin, two module 230 Volts complete all as specified.

Modular bell switch 6 Amp one module 230 Volts complete all as specified.

Switch piano flush type single pole one way 5 amp complete all as specified.

Switch piano flush type single pole one way 15 amp complete all as specified.

Modular fan regulator step type 100 Watt one module 230 volts complete all as specified.

Ceiling rose surface type 3 terminals 65x20mm compelete all as specified.

Lamp Holder, PVC / Polycarbonate type with back plate suitable for batton fittings all complete.

LED Bulb 9 watt, Cool/warm white 6500k / 3000K, suitable for base B22/ E27, 230 volts complete all as specified.

LED inverter Bulb 12 watt, Cool/warm white 6500k / 3000K, suitable for base B22/ E27, 230 volts complete all as specified.

LED Adore 2.8 W having base suitable for B22/ E27/ E14 holder CDL Candle Lamp , WW/ CDL, 6500/3000 K, 230 volts complete all as specified.

Modular Bell Push with indicator 6 Amps, 1 module including all As per existing make complete all as specified.

Modular fan step regulator, 2 Module including all As per existing make complete all as specified.

Modular cover plate with frame, 1 module including all As per existing make complete all as specified.

Modular cover plate with frame, 3 module including all As per existing make complete all as specified.

Modular cover plate with frame, 6module including all As per existing make complete all as specified.

Modular cover plate with frame, 8 module including all As per existing make complete all as specified.

Modular cover plate with frame, 10module including all As per existing make complete all as specified.

Modular metal flush box, 3 module complete all as specified.

Modular metal flush box, 6 module complete all as specified.

Modular metal flush box, 4/8 module complete all as specified.

Modular metal flush box, 4/10 module complete all as specified.

Modular metal flush box, 1/2 module complete all as specified.

Sheet metal enclosure (SPN DB) single pole and neutral 8 way double door complete all as specified.

Sheet metal enclosure (SPN DB) single pole and neutral 12 way double door complete all as specified.

Distribution board iron clad TPN DB double door with IP-43 protection 415 V 3 Phase 50 HZ 4 Way complete with appropriate size of copper busbar and neutral link complete and incl cutting chasing to wall for fixiing DB and making good the disturbed wall to match with existing surface complete all as specified.

Distribution board iron clad, double door with IP-43 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 HZ 4 way, complete with appropriate size copper bus bar and neutral link complete with one MCCB 4 pole 415 Volts 100 Amps rating with rupturing cap 16 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified.

MCB, SP 6 to 32 Amps, 10 KA, B Series complete all as specified. Note : The connection to the MCBs shall be done through thimble/ lugs do not direct wire shall be connected to MCBs.

MCB SPN 240V 32 Amps, 10 KA, B series, complete all as specified. Note : The connection to the MCBs shall be done through thimble/ lugs do not direct wire shall be connected to MCBs.

MCB SPN 240V 63 Amps, 10 KA, B series,including taking down old unsv MCB SPN complete all as specified. Note : The connection to the MCBs shall be done through thimble/ lugs do not direct wire shall be connected to MCBs.

MCB, TPN, 63 A capacity, 415 V, 10 KA, B series including taking down old MCB TPN complete all as specified. Note: The connection to the MCBs shall be done through thimble/ lugs do not direct wire shall be connected to MCBs.

MCB, 4 Pole, 63 A capacity, 415 V, 10 KA, B series including taking down old MCB 4 Pole complete all as specified. Note: The connection to the MCBs shall be done through thimble/ lugs do not direct wire shall be connected to MCBs.

MCCB, 4 Pole, 100 A capacity, 415 V, 10 KA, B series including taking down old MCCB 4 Pole complete all as specified. Note : The connection to the MCBs shall be done through thimble/ lugs do not direct wire shall be connected to MCBs.

Sub main wiring with two single core PVC insulated unsheathed , 1100 Volts grade, (FRLS) copper cable 6 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 6 sqmm copper conductor and connected to common earth dolly complete as directed. Note :- (i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit.

All as per item serial no 49 above but 4 Sqmm complete as directed. Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit.

Sub main wiring with two single core PVC insulated unsheathed , 1100 Volts grade, (FRLS) copper cable 6 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface casing caping medium duty (ISI Marked) with All accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 6 sqmm copper conductor and connected to common earth dolly complete as directed. Note :-(i) One run of PVC casing caping, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit.

All as per item serial no 51 above but 4Sqmm complete as directed. Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit.

LED tube light fitting integral type 1x 10 W, 230V, ultra slim square profile LED lighting fixture with extruded polycarbonate, environment friendly, energy efficient ready to use complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.

LED tube light fitting integral type 1x 20 W, 230V, ultra slim square profile LED lighting fixture with extruded polycarbonate, environment friendly, energy efficient ready to use complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size specified and directed.

LED tube light fitting integral type 1x 20 W, 230V, LED tube light fitting 3 in 1 light (Cool day light, normal white and warm white in one fitting) with extruded polycarbonate, environment friendly, energy efficient ready to use complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.

LED tube light fitting inverter type 1x 20 W, 230V,ultra slim square LED tube light with extruded polycarbonate, environment friendly, energy efficient ready to use complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.

Security light 30 Watt New generation energy saving and environmental friendly long life LED Bldg security light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having Top Opening seperate toughtned glass/verminproof driver compartment, SPDs with IP66 protection connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting including bracket of size 32 mm dia length 1.2 mtr along with clamps complete all as specified and directed by Engr-in -Charge.

Decorative wall Mounting light S/S fixture made up of S/S, with 9 W LED lamp B22 base complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Note : Rate of LED Bulb included in quoted rate.

Decorative wall light fixture made up of Polycarbonate, with 9 W LED lamp B22 base complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Note -: Rate of LED Bulb included in quoted rate.

Wooden/ metal box fitted on site for protection of 2 to 4 Nos meter boxes / DB Boxes by dismentling existing unsv hinges, doors and locking arrangements and other part etc and replacing with new hinges, doors, locking arrangements and other parts as required at site all as specified and directed.

Switch socket combination 2 in 1,3 pin,5 and 15 amp flushtype universal all as specified and directed.

35/36watt ,220v ac driver recessed type with high efficiency PMMA diffuser suitable for roof all as specified and directed.

Round shape 12/15 watt,220v ac recessed type with high efficiency PMMA diffuser soft glare free light complte with driver, holder & LED lamp suitable for roof ceilling ,including connecting up with three core flexible copper conductor case of all as specified and directed.

LED luminaire 600mm x600mm 35/36watt ,220v ac recessed type with high efficiency PMMA diffuser soft glare free light complte with driver, lamp suitable for roof ceilling ,including connecting up with three core flexible copper conductor case of suitable size all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below ground level, connecting to galvanised iron wire 4.0mm dia (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15 mm bore including provn of concrete pit in plain cement concrete M-20 type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of rainforced cement concrete M-20 reinforced with XPM (weight not less than 4 kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electrical plate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion. NOTE :- Item of earthing includes the cost of 7.5 metre long galvanised iron earth wire 4mm size and protection pipe of 15mm bore galvanised iron light grade and earth work.

Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 24 of tender doucments.

PAWAN KUMAR GOVT. CONTRACTORS (BID ID -3205299)

Eshaan Construction Co. (BID ID -3200166)