Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.9 LAccepted-AOC PO CHAUBATIA RANIKHET DISTT ALMORA UTTARAKHAND 263645 | ALMORA | UTTARAKHAND | 263645 | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹26.3 L+₹92,425 (3.64%)Rejected-Finance 22 JANKALYAN SOCIETY NAVJIVAN AJWA ROAD BARODA 390 019 | BARODA | VADODARA | GUJARAT | 390019 | L2 | Rejected-Finance Not being lowest tenderer |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
29 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Ranikhet
GE MES Ranikhet
REPAIRS TO CERTAIN B R WORKS IN CERTAIN BUILDINGS AT CHAUBATTIA UNDER GE RANIKHET
2023_MES_591034_1
GE/RKT/06 OF 2023-24
Open Tender
Civil Works
Item Rate
270 days
Chaubattia under GE Ranikhet
Class D, Cat a (i)
7 documents required · 7 mandatory
₹500
GE Ranikhet
₹70,000
21 Aug 2023
24 Apr 2023
6 Jun 2023
24 Apr 2023
29 May 2023
8 May 2023
Amount
BOQ ( Sch 'A') B/R items Taking down wooden chowkhat or frame area not exc 1.5 sqm each with shutter (without taking off shutter from frame) complete all as specified and directed.
Taking down wooden chowkhat or frame area exc 1.5 sqm but not exc 4 Sqm each with shutter (without taking off shutter from frame) complete all as specified and directed.
Taking down of shutters of any description not exc 1.0 Sqm each and resecuring or easing and adjusting with and refixing in same opening with and including iron mongries complete all as specified and directed.
Taking down of shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each and resecuring or easing and adjusting with and refixing in same opening with and including iron mongries complete all as specified and directed.
Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.
S & F 2nd class Hard Wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, and making good with existing surface as complete as specified and directed.
S & F 35 mm thick Second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze without sash bars, edges of framing plain fitted with cut and mitred beads for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(a) fitted to chowkats, complete as specified and directed.
S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed.
S&F 30 mm thick 2nd class hard wood glazed and skelton window and ventilators shutters open rebated and prepaired to received glass gauge etc diveded into square with sash bar edges of framing plain chamfered or rounded fitted with cut and mittered beads for sequring glass gauge etc , size of members of shutters as specified in MES SSR -I section 8 clause 8.24 (b) complete all as spcified and directed
M&L Mild steel work in framed work such as grills, gratings, guard bars, doors etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290.Gde-E-165, complete all as specified and directed.
S&F Factory made single extruded WPC (wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45 x 70 mm comprising of PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wwod powder/ rick husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded stat headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length complete all as spcified and directed (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
S&F Factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2 modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardanat and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as spcified and directed (Note:- stainless steel butt hinges and necessary SS screws shall be paid separately.
S& F Powder coated aluminum (minimum thikness of powder coated 50 micron ) work for doors windows, ventilators and partition (fixed portion ) with extruded built up standard tubular section/approriate Z section and other section of approved make confirming to IS 733 and is 1285 , fixing with dash fasteners of required dia and size, inc.necessary filling up the gaps at junction , i.e. at top , bottom and sides with required EPDM rubber/neoprene gasket etc aluminium sections shall be smooth and rust free straight , mitered and jointed mechnicallly where ever required incl. cleat angle . aluminium snap beding for glazing/paneling , C.P brass / stainless steel screws , all complete as per architectural drg complete all as spcified and directed
S &F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as spcified and directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as spcified and directed
S&F sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in each pane, 3 mm thick complete all as per specified and directed.
S & F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete as specified and directed.
S&F sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in each pane, 5.5 mm thick complete all as per specified and directed.
S & F Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed.
Supply and fixing 75 mm butt hinges medium weight cold rolled mild steel ISI marked fixed with wooden screws complete as specified and directed.
Supply and fixing 100 mm butt hinges medium weight cold rolled mild steel ISI marked fixed with wooden screws complete as specified and directed.
Supply and fixing 100 mm mild steel pressed handles, oval type, stove enamelled black and fixed with wooden screws, complete as specified and directed.
Supply and fixing 150 mm mild steel pressed handles, oval type, stove enamelled black and fixed with wooden screws, complete as specified and directed.
S&F for mild steel barrel tower bolts stove enameled black, with bright bolt length of bolt 100 mm (ISI marked) fixed complete fixed with screws,complete as specified and directed.
S&F for mild steel barrel tower bolts stove enameled black, with bright bolt length of bolt 150 mm (ISI marked) fixed complete fixed with screws,complete as specified and directed.
Supply and fixing mild steel sliding door bolt plate type (ISI Marked) stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts, length of bolt 250 mm and fixed with mild steel wood screws all as specified and directed
S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as spcified and directed
S&F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.
S&F in repair 25 mm dia curtain rod/harrison rails,mild steel, chromium plated fancy type fixed with end brackets, stops ,rollers & all connected accessories complete all as specified and directed.
M&L for 18/19 mm thick prelaminated particle board, interior graded, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cupboard with teak wood beading of all sides fixed in repair complete all as specified and directed.
M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink primer complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.
S&F 8mm thick, wooden pieces, machine presured one side laminated and other side balancing green, as in parquet flooring with and including necessary padding as soft wool graded type as required at site, fixed with adhesive as per manufacturer's instructions including taking down old wooden flooring with or without plywood complete all as specified and directed.
All as per item No. 35 above but except material complete all as spcified and directed
M&L for 9mm thick plywood, grade BWR, type BB fixed with rawl plug and screws to timber framework fixed as in repair of any thickness complete all as specified and directed.
Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.
S & F for powder coated aluminium anodised snap grid system of grid size 600 X 600 mm fixed to walls with rawl plugs and screws and hang to roof members with 2 mm dia GI wire comprising of the Main Tee 28x24x3mm thick, Cross Tee 28x24x3mm thick and Wall angle 24x24x3mm thick sections complete all as specified and directed:-
S & F 4 mm thick Everest designer ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 595 X 595 mm size fixed with staples on GI/Aluminium snap grid as in ceiling with and including dusting of surface and applying two coats of oil bond distemper over a coat of primer complete all as specified and directed
S & F in repairs 6mm thick decorative PVC Sheet hollow (design approved by GE) for insulation and acoustic purpose on wall surface, screw to timber frame work for levelling of wall as reqd, including with panelling to vertical surfaces, fixed with rawl plug and screws complete all as specified and directed
M&L for solid PVC wall lining consisting of 5.00mm thick single side prelam PVC sheet inclusive of insolvent cement and fixing at site on PVC frame all as specified and directed
S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame all as specified and directed
Dismantling of boarding , any description fixed in any position like wall ,wooden flooring any thickness including cover fillet complete all as specified and directed.
S&F Second class hardwood 25 mm boarding plain one side with butt joint fixed with nails in any situation Complete all as specified and directed.
Dismatling timber scantling 40 sqcm and above in any position ,unframed work complete all as specified and directed
M&L 2nd class hard wood as in scantling clean sawn as in floor/roof/truss/purlin & similar work of any description in unframed work complete all as specified and directed.
Demolition of brick masonry/precast block/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excl ashlars facing,dressed stone work and pre-cast concrete articles complete all as specified & directed
M&L for precast cement concrete 1:3:6 type C1(using 20 mm graded stone agg) as in block masonry with solid blocks exc 10 cm in width and set in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with sub class 'B' using old size bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified & directed
M&L for raised pointing to block in course or ashlar masonry or concrete block walling in Cement mortar1:4 complete all as specified & directed
Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified & directed.
M & L for RCC 1:2:4 Type B1 (using 20mm graded crushed stone aggregated)for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed.
M&L for formwork to rough finished surface of concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified & directed.
S&F TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) Complete all as specified and directed.
M&L for 25 mm thick plain cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring in leveling course complete all as specified & directed
M&L for Vitrified ceramic tiles 9 to10 mm thick (Square / rectangular) light shade polished area of each tiles not exceeding 0.36 sqm as in floors etc laid over with and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the colour tiles complete all as specified & directed
M&L for Vitrified ceramic tiles 9 to10 mm thick (Square / rectangular) light shade polished area of each tile not exceeding 0.36 sqm as in skirting etc laid over with and including backing coat or bedding layer of 10mm thick 1:4 cement mortar for laying wall/vertical finish, jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles complete all as specified & directed
M & L for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cement laid in bays including necessary form work Complete all as specified and directed.
M&L for Providing cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) as in surface channel and drains complete all as specified & directed
Extra for forming fair finished drain or channel 30 cm inner girth in cement complete all as specified and directed. concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc all as specified and directed.
M&L for 100 mm thick plan cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in hardstanding,path, flooring surface finished even & smooth using extra cement complete all as specified & directed
M&L for 75mm thick plain cement concrete type C-2 1:3:6 type (using 40mm graded stone aggregate) in sub base to floors and paving etc all complete all as directed
M&L for Chequered cement concrete tiles 25mm thick with mixture of white & grey cement and no pigment in equal proportion, set,area of each tile exceeding 0.05 sqm but not exceeding 0.09 sqm, jointed and pointed in near cement slurry in floors,laid with and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 complete all as specified & directed
Demolition of cement concrete (unreinforced) in ground floors and pavings exceeding 15 cm thickness (below or above ground level) Complete all as specified and directed.
M&L for Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling,sub base and mass concrete complete all as specified & directed
M&L for Sand filling under interlocking tiles or in foundations including watering and consolidation complete all as specified & directed
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified
M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping /kerb/Side of interlocking etc.including weathering and throating including necessary form work etc complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded, pointed in mortar etc complete all as specified and directed.
M & L for machine cut Kota stone slab flooring 20 – 25mm thick laid over with and including cement screed base 20mm thick in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
M & L for Black Granite (of any type)/granite tiles 18-20 mm thick machine cut laid over with and including cement screed base 15mm thick in cement mortar 1:4, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including nosing where reqd in cooking platforms/wall/slab/platform and like complete all as specified and directed.
Dismantling mild steel or wrought iron work in roof trusses,gratings etc and similar work complete all as specified and directed
M&L for mild steel work in roof trusses,purlins,rafters,wind ties,crane gantries,rails and fastenings and heavy bracket framing (Beam,Tee,Angle,Channel or Flat sections) including distance pieces,cleats etc complete all as specified and directed.
Dismantaling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to wall , fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to wall , fixed with self tapping screws complete all as specified and directed.
S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with ‘L’ type or ‘J’ type or cranked hook bolts with bitumen washer in roof or wall and making good Complete all as specified and directed.
Taking down cement / lime plaster of any description on brick work or stone walls etc including racking out joints hacking for key scrubbing down with water etc.complete all as specified and as directed
M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:6 finished even & smooth without extra cement on internal wall surface complete all as specified and directed
M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:4 finished even & smooth without extra cement including mixed with water proofing compound as per manufacturer's instruction (minimum 3% by weight of cement) on external wall complete all as specified and directed Note:- WPC will be measured & Paid separately as supply only
Supply only integral water proofing compound complete all as specified and directed
M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
S&F in repair white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 450 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed.
S&F in repair vitreous china wash down water closet pan (padestal pattern) with seat cover (excluding fixing bolts, flushing cistern and flush pipe) etc complete all as specified and as directed.
S&F in repair flushing cistern 10Ltr capacity PVC valveless, syphonic action type, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed
S&F in repair for Wash basins, white Vitreous China (flat back or angle back type) size 580X450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe , complete all as specified and as directed.
S&F sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair 15 mm dia bib tap cast copper alloy, fancy type chromium plated ,'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed
S&F in repair fancy type 15 mm dia Pillar taps ,cast copper alloy ,with capstan heads chromium plated screwed down high pressure, with or without letterd HOT or COLD with long screwed shanks and fly nuts ,screwed for iron pipe and fixed complete all as specified and directed
S&F in repair brass CP Stop valve/ Angle valve 15 mm fancy type with long shank and cup fixed complete all as specified and directed
S&F for PVC connection 15mm size with brass nuts of length 450mm complete all as specified & directed.
aditya construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .