Shifting / Undergrounding of 132kV Basni - NPH line passing through the campus of AIIMS, Jodhpur (on the request of AIIMS, Jodhpur) with 630 sq. mm, 132kV XLPE cable system on D/C monopole including detailed route survey, laying and installation of c

220 KV D/C TUBULAR MONOPOLE (As per specification requirement)( Bottom X-arm 22 mtr.)

132 KV D/C TUBULAR MONOPOLE (As per specification requirement) )( Bottom X-arm 22 mtr.)

120 KN Disc Insulator ( silicone composite)

70 KN Disc Insulator ( silicone composite)

ACSR Panther Conductor

Double Tension H/W for ACSR Panther

Double Suspension H/W for ACSR Panther

M S Compression Joint for Panther Conductor

Repair Sleeve for Panther Conductor

Vibration Damper for Panther Conductor

Pipe type Earthging

Phase late

Number Plate

Danger Plate

132kV, Single Core, 630 mm2, XLPE Copper Cable

145 kV rated voltage pre-moulded outdoor end termination kit completewith accessories suitable for the above 630Sq. mm XLPE Copper underground cable

Terminal connector suitable for ACSR Panther on the Outdoor cable termination to connect cable end termination to ACSR panther Line.

132kV class of 120kV rating LA with grading ring, discharge counter with milli meter

Solid bonding Link box with Link plates, bonding & grounding cable complete with other associated accessories for 1-phase

145kV rated Voltage Pre-moulded Straight Through Joint (with provision for sheath separation for cross bonding) suitable for above cable

Galvanized Steel supporting structures/ arrangement, Gantry structures, Ladders etc. for suitable and safe terminations of XLPE cable from Terminal tower/ gantry maintenaing statutory clearances and safety as per IE rules

Optical Fiber Cable and associated accessories/items as per specification

Earthing Material including cast iron pipes with suitable clamps, charcol, common salt etc. (for each circuit)

Warning Tapes as per Specification

Retrofitting of protection relays (Line differantial cum distance - Numerical relay with optical interface) and LIU

OLTE equipments consisting of Fully Wired Cabinet with base 19" equipment rack with Control, Synchronisation, Alarm & Power supply cables- 1 No.;Central Processing Card - CPU- 2 Nos.;Power supply unit -48VDC- 2 Nos.;OLTE - 4 Port STM-1(155 Mbps Card)- 1 No.;SFP Duplex LC Connector for OLTE Card- 4 Nos.;OFC Patch Cords - 20 m- 8 Nos.;8 Port 2w/4w E&M Interface Card- 1 No.;4 Port Data Interface Card- 1 No.;4 Port Ethernet Card- 1 No.;4 Command Integrated Teleprotection Card- 1 No.;Line Differential relay interface card (min 2 ports)- 1 No.;Engineering Order Wire Phone- 1 No.;Laptop (Core i3 processor family,3.1 GHz & above, 15.0" LED, 1TB HDD, 4 GB RAM, DVD R/W) with configuration Software for all OLTE Terminals/ Equipments with preloaded licensed Microsoft Windows 10 OS as offered- 1 No.

Erection of underground Optical fibre cable (2 runs 12F) and associated accessories/ items as per specification including FODP, Patch cords etc.

Installation Hardware for above 24 Fiber OPGW Fiber Optic Cable (for complete route)

Joint Box for (24 Fibre) OPGW Cable

Add: Any other item bidder may require to complete the Cable System as per specification requirements

Description of Work / Item(s)

Detail Survey as per tentative route-Which includes the following major activities-Pegging of line route, providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey, profile preparation of approved route on graph sheet and marking of offset on either side of line, marking of side clearance for hills, sand dunes etc, as per specification and tower scheduling.

Check survey as per approved route of line which includes-Re-checking of the line route as per approved profile, chainage, tower center marking, pit marking, bisection of angle tower as required at site.

Dismantling of Towers-Dismantling of super structures alongwith extensions, having tack welded Bolts & Nuts, including removing of D shackles,hangers, U-Bolts, step bolts, ACD, Danger plate, number plate, Phase plate of tower including transportation from site to our store and stacking of all material.-(A) 132 KV and 220KV S/C & D/C Towers (all types)

Destringing of Conductor / Earth Wire-(A) Destringing of ACSR panther conductor :-Dismantling of vibration dampers and armour rods, removalof conductor from clamps and fitting in rollers, detensioning,dehoisting of insulator string as required and collecting thematerial& depositing the same in our store and stacking. (i) Single Conductor

Restringing of Conductor / Earth Wire-(A) Restringing of ACSR Panther conductor:- Dismantling of vibration dampers and armour rods, fitting in rollers, de-tensioning, holding & lowering of conductor, de-hoisting of insulator string as required, adding/ removing and jointing of conductor, hoisting of insulator string, lifting of conductinto rollers and re-tensioning, jointing, fitting of armour rods and vibration dampers and clamping per route KM of the line section to be restrung dismantled material not re-used to be deposited in our stores & stacked. (i) Single Conductor

Tubular Mono pole-Erection of 220kV D/C Tubular Mono pole (End Termination)

Tubular Mono pole-Erection of 132kV D/C Tubular Mono pole

Tubular Mono pole-Earthing of Monopole alongwith required material

OPGW Stringing:-Stringing of 24 Fiber (DWSM) OPGW Fiber optic cable

OPGW Stringing:-Installation hardware set for above 24 Fiber OPGW Fiber optic cabling including of all cable fittings & accessories except joint box

OPGW Stringing:- Joint Box (24 Fiber)

OPGW Stringing:-Destringing of 24 Fiber (DWSM) OPGW Fiber optic cable

OPGW Stringing:-Restringing of 24 Fiber (DWSM) OPGW Fiber optic cable

132 KV D/C Cable System:

Cable Installation:Handling,Transportation to site & laying of 132 KV, single core, 630 Sq mm XLPE Copper cable as per foregoing specification requirements.

Cable Installation:Estabilishing of 02 circuits having 06 nos. (2X3 phase)132 KV, single core, 630 Sq mm Copper cable in trefoil formation alongwith pilot fiber cable, providing of Warning tape, tagging, fixing, pipes for drain & gate crossing as per drawings & specification in trench by pulling, drawing etc. including cables using standard cable installation equipments as per directions of the engineer in-charge & returning of unused item in Store.

Cable Installation:Handling & making of outdoor type cable end termination for 132 KV, single core, 630Sq mm power cable (XLPE copper cable) as per specification.

Cable Installation:Handling & making of straight though joints for 132 KV, single core, 630Sq mm power cable (XLPE copper cable) as per specification.

Erction of Soild Link Boxes with accessories

Erection of Galvanised steel support structure along clams, connectors, nuts bolts and washers, foundation bolts etc.for outdoor 132kV Cable and termination (composite structure to mount link boxes & the cable end termination) for each phase

Installation of 132kV class surge arrestor with grading ring,discharge counter with milliammeter)

Earthing material including cast iron pipes with suitable clamps, charcol, common salts etc. complete set for each cable circuit (each circuit for 3 phase individually)

Terminal connector suitable for ACSR Panther /Al pipe conductor to connect cable end termination.

Installtion of underground Optical Fibre

OFAC/OFC and hardware fittings/accessories alonwith FODP

Installtion of OLTE Equipment

Retrofitting of protection relays (line differential cum protection distance relay)

Charges of conducting pre commissioning tests as per specification & successful commissioning of circuit

CIVIL WORKS

Foundation of 220kV D/C Tubular Mono pole (End Termination)

Foundation of 132kV D/C Tubular Mono pole

Soil investigation Transmission Tubular Mono Pole

Transmission Tubular Monopoles footing protection work including of required items as per specification as per requirement-220kV D/C Tubular Mono pole (End Termination)

Transmission Tubular Monopoles footing protection work including of required items as per specification as per requirement-132kV D/C Tubular Mono pole

Surveying of cable route excavation of trial holes as per field requirement, prepartion of cable route profile, drawings for cable laying , final route alignment, marking lines & grades/prepartion of final cable route darwings after approval & preparing bill of materials for complete route shown in drawings i.e. between terminal sub stations.

Evalutions of thermal resistivity of soil along cable route (as per tecnical specifications)

Cutting black bitumen Pedestrial Concrete surface upto any depth including all layers of crust for laying Power Cables etc, staking of useful material and disposal of surplus debris including all leads including barricading, providing danger board/diversion board, lighting, reflectors etc.

Earth work in excavation for buried cable trenches/foundations including dressing of sides and ramming of bottoms, lift upto 2.5 mtr. including taking out the excavated soil & backfilling of jhiri with watering &ramming,timbering& shoring ( wherever required ) disposal of surplus excavated soil as directed with all lead and lift including barricading, providing danger board/diversion board, lighting, reflectors etc.

Horizontal Direct Drilling (Trenchless Digging) method (with 250mm dia HDPE Pipe of minimum 6 PN and strength complying ISS) wherever open cut method cannot be adopted. (for double circuit -3 phase circuit formation) (If required)

Providing and laying of Cement concrete including curing,etc using stone aggregate 40 mm nominal size (crusher broken) in foundation plinth, excluding the cost of shuttering using 1 cement: 4 sand: 8 stone aggregate (For equipment foundation, junction box etc.)

P&L cement concrete in R.C.C. work in foundation, rafts,footings,strap beams, bases of columns etc.,'including curing ,compaction,finishing with rendering in cement sand mortar 1.3 (1cement :3 sand) and making good the joints, excl., the cost of centering and shuttering and reinforcement :M-20 grade mix 1:1.5:3 (1cement:1.5coarse sand : 3 graded stone aggregate 20 mm nominal size (For equipment foundation, junction box , culvert etc.)

Brick wall works, if required

Providing and fabricating steel reinforcement for R.C.C. work bending ,placing in position and binding complete including cost of binding wire in foundation ,raft footing ,strap beams base of column etc , up to plinth level hot rolled deformed (I.S.1139) cold twisted (I.S.1786)bars (For equipment foundation, junction box \ etc.)

Centering and shuttering with plywood or steel plates upto 4.5m height

Providing &Fixing of steel febrication made of angles, tees,square bars or other flats black pipe with hold fast and fittings complete as per design @ drawing including cutting welding & fabrication with priming coat of redoxide.

Providing, Laying & Jointing RCC class NP-2 Non Pressure pipes (IS:458 Mark) of approved make with collars, jointed with CM 1:2 or having Spigot & socket ends with flexible rubber rings joint including testing of joints etc. complete: 450 mm D.

Providing & Fixing of Reinforced Ferro Cement Cable Trench Covers designed for 'A' & 'AA' loading duly marked on cover with adequate reinforcement having thickness 75mm to 100 mm anti corrosive bitumen pained MS plate Rim & MS lifting hooks admixtures like plasticizer bono -improving compound, shrinkage resistance compound, abrasion resistant complete as per approved design ( For cable joint box) (For any span)

Providing & Laying HDPE pipe heavy duty of approved make jointed with solvent cement ( to be used for horizontal direct drilling (trenchless digging/ road crossing)]-(i) 250 mm dia. (for double circuit each circut with 3phase cores

Providing & Laying HDPE pipe heavy duty of approved make jointed with solvent cement ( to be used for horizontal direct drilling (trenchless digging/ road crossing)]- (ii) HDPE PLB Duct for Optical Fiber Cable

Supply and laying inter locking RCC cable covers as per approved drawing

Supply, spreading of clean rlver sand in the cable trench and cable joint pit as per specification.

Providing & Fixing Cable Route Marker along the route of cable at the spacing of 50 meter etc. as per drawing and site requirement.

RR Stone Masonry in F/P cum 1:4

Plastering 20 MM thickness CUM 1:6

Providing & laying plane cement concrete M20 Grade

Add: Any other item bidder may require to complete the Civil works as per specification requirements

Telmos Electronics (BID ID -2984100)

Telmos Electronics (BID ID -2984100)