Restoration of rain damages to LWSS Lower Piyashni in tehsil Bhunter Distt Kullu H.P.

Amount

Excavation in foundation trenches etc. in earth work lift up to 1.5 mtrs. Stacking the excavated soil not more than 3 metres away from the edge of excavation and then returning the stacked soil in 15 cm layers when required in to plinth and sides of foundations, consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres in pick jumper work.

Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth work in all leads lifts as per the entire satisfaction & direction of the Engineer -in- Charge

Providing and laying cement concrete work 1:1.5:3 (1cement :1.5 sand: 3 graded crushed stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge. in: -

In foundation footing bases of columns and like mass concrete with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge. in: -

In wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge. in: -

Flat surfaces such as soffits of suspended floor, roofs landings and the like floors etc upto 200mm thickness. with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge. in: -

Providing and laying cement concrete 1:2:4 (1 cement: 2 sand: 4 graded crushed stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth work in all leads lifts as per the entire satisfaction & direction of the Engineer -in- Charge

Suspended floor, roofs landings shelves and their supports balconies, beams, girders ,bressumers and cantilevers etc in all leads and lifts.

Prov. Form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring , shuttering, strutting & propping etc. with wooden battens & ballies , height of propping & centring below supporting floor to ceiling not exceeding 4 mtrs.& removal of the same for insitu reinforced concrete & plain concrete work in :

Vertical surfaces such as walls (any thickness) partitions & the like I/c attached pillasters, buttresses plinth and string courses and the like :with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge. in: -

c) Flat surfaces such as soffits of suspended floor, roofs landings and the like floors etc upto 200mm thickness.with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge. in: -

Edges of slab including all leads lifts as per the entire satisfaction & direction of the Engineer -in- Charge

Providing tor steel reinforcement for reinforced cement concrete work including bending binding and placing in position complete including the cost of binding wire in all leads and lifts.

Providing and fixing MS Man hole cover of size 600X600 mm made up of 3.15 mm thick plain MS sheet fixed in angle iron frame of 50X50X 5 mm suppoted with MS flat of 50X5 mm at centre of sheet including fising hold fast,hinges and locking arrengment and lock of medium size etc. with as per direction and to the entire satisfaction of Engineer in charge.

Laying and jointing GMS tube of folowing dia in walls,floors etc. i/c tube fitting and making the wall floors etc good)

Providing and fixing Brass wheel valve of standred make including all leads lifts as per the entire satisfaction & direction of the Engineer -in- Charge

Shivashish (BID ID -517492)