Repairing and Servicing and providing Starting Battery for Various DG Sets at TE BTS Hub sites of Haridwar BA

Amount

Visit charges to attend the fault of DG Set in BA Haridwar on call basis for DG Sets at Exchanges/ BTSs i/c analysis of fault, minor repiring , and making the detailed list of defects and estiimation of the same etc. complete as required.

In OA Haridwar a)Manakmajra & Gurukul narsan

In OA Srinagar Hill area (a) Kandakhal b) Satpuli TE c)Naugaonkhal d)Surari Lansdoene e) Buakhal f) Ghurdori g)Kanskhet h)Seeku i) Bagwan j)Kaudiyal k) Joshimath l)Peni

Pdg & Making of General Servicing of the following capacity E/A sets of different make and model installed at TE/BTS Sites i/c replacement of Lub oil ,lub oil filter and diesel filter and cleaning of all parts of DG set like fuel line ,cooling system ,checking of all DG control wiring ,belt and drives for proper working as per manufacturer recommendations complete as per manufracturer recommendation i/c Fare and labour charge i/c complete as reqd.(Note: 1.Diesel for initial testing of DG set will be arranged by the contractor 2.The recovered black oil shall be given to contractor .

10 to 20 KVA EA Set -

25 to 40 KVA EA Set

Replacement of following item in upto 40 KVA E/A sets of different make and model installed at TE/BTS Sites, i/cremoving of faulty item (if reqd) ,making connection, testing etc complete as reqd.

Radiator Coolent Pre Mix ready to use (Make -kirloskar /HP/Fleetguard)

Lubricating Oil Multi Grade ( 20W40)( Make -KOEL /Servo/HP/volvoline )

Steel wire braided fuel pipe with benjo bolts & washer

Battery Leads Red & Black Standard Length & Size suitable up to 130AH battery i/c brass terminals

Battery Brass Terminals

Solid state SMPS or SCR based battery chargers suitable up to 12V, 180 AH Battery

Stop Solenoid (Fuel shut off valve )

Fan V Belt

Diesel & Lub oil Filter kit

Startng key switch

Hose pipe Set with Clip

Stop /Start Push button

RPM cum hour meter

Air cleaner element

Fuel feed pump

Calibration of the fuel injection pump & Injecor up to 40 KVA capacity of DEA sets of different makes and models under various exchanges I/c removal of fuel pump from site, transportation at Workshop, calibration of pump and nozzles, grinding and fixing the same after calibration at site in the existing DEA set etc complete as reqd.

Repairing & General Servicing of the existing faulty radiator in existing DEA set up to 40 KVA by repairing of leakage and cleaning of copper tubes with help of cleaning agents, Dismantling of radiator assembly including transportation, brazing and testing for leakage and re-installation after repairing the same etc. reqd.

Labour Charges for Top Overhauling of DG set up to 40 KVA Capacity of various make as per manufacturer recommendations i/c dismentalling and replacement of all the filters like oil filters,disel filter, air filter, making tappet setting, , repairing/servicing of fuel pump assembly,turbo charger,cylinder head and cleaning of all carbonised parts,radiator cleaning,replacement of engine oil coolent,replacement of belts safties,meters if reqd and calibration of engine as per manufaturer's reccommendations etc as required. ( Only for Labour Charges without General Servicing Job i/c Transportation, Dismentling and Assembling Charges )

Removal of following faulty / burnt / damage parts up to 40 KVA DEA set and providing & fixing of new parts to bring the Engine in healthy condition etc. complete as reqd.

Piston assembly complete

Cylinder Liner assembly

Valve (Inlet and Exhaust) with Valve guide with seal

Cylinder Head gasket

Set of Joints

CR bearing

Set of O ring

Thermostate Element

Water pump

Rubber coupling

Set of copper washer

Repairing of cylinder head [if required] to stop the leakage after fixing of existing gaskets and repositioning of head (per head) etc. complete as reqd.

Dismantling of existing DEA Set up to 40 KVA capacity in silent canopy i/c control panel with Power and control cable , Silencer and exaust pipe , diesel tank , and associated fuel line and all other electrical acessories etc i/c placing the same in same bldg as per direction of Eng-In-charge i/c making good the damage etc as reqd (a) 40 KVA TE Gurkual narshan b)15 KVA Peni (Joshi math

Shifting & Transportation of existing dismentalled DG Set of following capacity and type i/c all acessories i/c loading with Crane /hydra/chain pully and safe transportation from one location to other location as given below i/c unloading with Crane /chain pully on existing CC Foundation at new location etc etc.as required

40 KVA EA Set at TE Gurukal narsan to TE Manakmajra

15 kVA EA Set at TE Peni to Joshimath

Installation, testing , commissioning of Existing DEA set up to 40 KVA on existing foundation with all acessories like Cubical type manual /AMF control panel i/c fixing of Silencer ,exhaust pipe , fuel tank , fuel line connections, control wiring from panel to engine i/c cutting, jointing, welding of flanges (if reqd) , nuts, bolts , i/c loading and assembling ,fixing the the DG Set i/c making good the damage etc. i/c One hour testing of DG set on exchange load etc as reqd a) 40 KVA TE Manakmazra b) 15 KVA Joshi math

Supplying and laying of following size of pvc insulated pvc sheathed 1.1 kv grade Aluminium conductor armoured cable confirming to relevant IS-Specification i/c fixing on wall surface with suitable GI Shaddle /in air a/w GI Wire /in pipe /in recess /ground etc complete as reqd. (Make -Polycab/havells/finolex)-

4 X 16 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4 X 16 sq. mm (28mm)

S/F of 63 amps four pole ON load change over switch in steel enclosure with side handle operation capable of working 415/500 V i/c fixing the same on wall /pole with suitable clamp/fastner i/c drilling hole , making connection, earthing the body etc. i/c dismenting of existing faulty unit (if requiredat site)as reqd.

S/F 63 Amps Heavy duty Double break TPN Switch fuse unit with HRC fuses in steel enclosure with side handle operation capable of working 415/500 V i/c i/c fixing the same on wall /pole with suitable clamp/fastner i/c drilling hole , making connection, earthing the body etc. i/c dismenting of existing faulty unit (if requiredat site)as reqd.

Supplying and fixing of 12 Volts Maintenance free Battery of following capacity for E/A sets, i/c initial charging, battery terminals, transportation, testing, commissioning etc. complete as reqd.(Note: Battery should be of atleast 24 months full replacement warranty/ . Manufacturer warranty card with dealer stamp shall be submitted along with new battery).

GLOBALVISION POWER SOLUTIONS PVT LTD