C/o 6 No. Type-III Quarters with Parking in Block-D of Medical Colony for Dr. Y. S. Parmar Medical College at Nahan, District Sirmaur (HP)

Amount

EARTH WORK :-

Cutting in earth work in all heights & depths in all kinds of soil including including struated soil comprising of pick work, jumper work, blasting work ( both soft & hard rock ) & shall be excavated with chiselling & wedging out rock( where blasting is prohibited ) and their interemediate classification of soil including dewatering wherever required setting out to required lines, level as shown on the drawing and as directed by the Engineer-in-Charge at site, according to the HPPWD specifiction of 1990 volume-I and sorting out useful & unuseful materials & stacking the same in all leads and lifts and transportation of the unuseful materials for disposing at dumping sites ( to be arranged by the contractor ) through all modes of transportation including head load,animal load or mechanical means along with its levelling fine dressing & all labour machineries materials, tools equipements and safety measures & incidentals necessary to complete the work by mechanized means and labour ( If required ). All useful materials such as stones, shingles, aggregate and slates shall be sorted along road side to the maximum possible extent in all leads and lifts through all modes of transportation and used and removed as per the direction of Engineer-in-Charge .Any loss to the public and private properly during the course of execution and dispoal of serviceable and un-serviceable materials shall be the aboulute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Excavation in foundation, trenches etc. in earth work in all heights & depths in all kinds of soil including struated soil comprising of pick work, jumper work, blasting work ( both soft & hard rock ) & shall be excavated with chiselling & wedging out rock ( where blasting is prohibited ) and their interemediate classification of soil including dewatering wherever required setting out to required lines, level as shown on the drawing and as directed by the Engineer-in-Charge at site, according to the HPPWD specifiction of 1990 volume-I and sorting out useful & unuseful materials & stacking the same in all leads and lifts and transportation of the unuseful materials for disposing at dumping sites ( to be arranged by the contractor )through all modes of transportation including head load,animal load or mechanical means along with its levelling fine dressing & all labour machineries materials, tools equipements and safety measures & incidentals necessary to complete the work by mechanized means and labour ( If required ). All useful materials such as stones, shingles, aggregate and slates shall be sorted along road side to the maximum possible extent in all leads and lifts through all modes of transportation and used and removed as per the direction of Engineer-in-Charge .Any loss to the public and private properly during the course of execution and dispoal of serviceable and un-serviceable materials shall be the aboulute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Excavation in earth work in drains and channels in all heights & depth in all kinds of soils, including struated soil comprising of pick work, jumper work and blasting work ( both soft & hard rock ) & wedging out of rock,( where blasting is prohibited ) and their interemediate classification of soil including dewatering wherever required, setting out to required lines, grades, side slopes, trimming bottoms and levels as shown on the drawing and as directed by the Engineer-in-Charge at site, according to the HP.PWD., specification of and sorting out useful unuseful materials and stacking the same in all leads and lifts and levelling and disposing of surplus excavated earth in acquired width of road or on approved dumping sites which will be arrange by the contractor at his own level and dumping charges if levied will be born by the contractor through all modes of transportation and used/ removed as direction of the Engineer-in-Charge including head load,animal load or mechanical means along with its levelling fine dressing & all labour, machineries, materials tools equipments and safety measures and incidentals necessary to complete the work by mechanized means & labour ( if any required ).All useful materials, such as stones, shingles, aggregate and slates shall be sorted out and stacked along road side to the maximum possible extent in all leads and lifts through all modes of transportation and used/ removed as per direction of Engineer-in-Charge. Any loss to the public and private properly during the course of execution and dispoal of serviceable and un-serviceable materials shall be the aboulute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges

Earth work in excavation in all heights & depths in all kinds of soils for structure as per drawing and technical specification clause 305.1 including setting out, construction of shoring and bracing, removal of stumps & other deleterious material and disposal all leads dressing of sides and bottom and back filling in trenches with excavated suitable materials, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charge.

Filling in plinth with sand under floors including watering ramming consolidating & dressing complete as per HP.PWD., specification 1990 volume-I ( one ) including carriage of all labour equipments & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

FORM WORK :-

Providing form work with steel plates 3.15mm ( Three decimal one five milimeter ) thick welded with angle iron in frames 30x30x5mm ( Thirty into thirty into five milimeter ) ,so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens & ballies, height of propping and centring below supporting floor to ceiling not exceeding 4.00 mtrs ( four meters ) & removal of the same for in-situ reinforced concrete and plain concrete work as per HP.PWD., specification 1990 volume-I ( One )including carriage of all labour equipments and materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge in :-

Foundation, footing, basis of columns etc. and mass concrete.

Flat surface such as soffits of suspended floors, roofs, landings and the like floors etc. upto 200mm ( Two hundredmilimeter) in thickness

Vertical surfaces such as walls ( any thickness ) partitions and the like including attached pillasters, buttresses, plinth & string courses & the like.

Columns, pillars, posts and struts, square, rectangular or polygonal in plan.

Stair cases with slopping or stepped soffits excluding landing.

Beams, cantilevers,girders and lintels sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1.00 mtrs ( One meter )in depth in all heights from floor level.

Edges of slabs and breaks in floors & walls under 20cm ( twenty centimeter ) wide in all floor level.

CONCRETE WORK :-

Providing & laying cement concrete 1:6:12 ( One cement : six approved sand : twelve graded crushed stone aggregate 40mm ( forty milimeter ) nominal size ) and curing complete excluding cost of form work in foundation & plinth as per HPPWD. Specification 1990 volume-I ( One ) including carriage of all labour equipments and materials to various location through all leads,lifts and other incidental charges complete as per the entire satisfaction of the Engineer-in-Charge.

Providing & laying cement concrete 1:4:8 ( One cement : four approved sand : eight graded crushed stone aggregate 40mm ( forty milimeter ) nominal size ) and curing complete excluding cost of form work in foundation & plinth as per HPPWD. Specification 1990 volume-I ( One ) including carriage of all labour equipments and materials to various location through all leads,lifts and other incidental charges complete as per the entire satisfaction of the Engineer-in-Charge.

Providing concrete for plain/ reinforced concrete in open foundation complete as per drawing & technical specification clause 802, 803, 1202 & 1203, Plain cement concrete Grade M 10 1 : 3 : 6 ( One cement : three approved sand : six graded crushed stone aggregate 40mm ( forty milimeter ) nominal size ) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

Providing & laying cement concrete work mechnically mixed & vibrator 1: 1.5 : 3 ( One cement : One & half approved sand : three graded crushed stone aggregate 20mm ( twenty milimeter ) nominal size ) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

Foundation, footing, basis of columns etc. and mass concrete including carriage of materials within all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge as per HP.PWD., specification 1990 Volume-I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Suspended floors,roofs,landings & shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto all floor levels including carriage of materials within all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Wall ( any thickness but not less than 0.10 metres ( Zero decimale one zero meter ) attached pillasters buttresses,plinth and string courses etc. from top of foundation level upto all floor level including carriage of materials within all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge

Stair cases ( except spiral stair case ) excluding landing but including preparing of the surface & finishing of nosing upto all floor level including carriage of materials within all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Columns, pillars, posts and strutts upto all floor level including carriage of materials within all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & laying cement concrete work mechnically mixed & vibrator 1: 1.5 : 3 ( One cement : One & half approved sand : three graded crushed stone aggregate 20mm ( twenty milimeter ) nominal size ) reinforced concrete chajja not exceeding 10 cm ( Ten centimeter )thickness upto floor all level including finishing the exposed surface with cement mortar 1:3 ( One cement : three approved sand )to give a smooth & even surface centring/form work & curing complete excluding the cost of reinforcement including carriage of materials within all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position including cost of binding wire complete upto all floor level as per HPPWD specification 1990 Volume-I ( One )including carriage of all labour equipment & materials to various location through all leads, lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

BRICK WORK :-

Brick work second class using common burnt clay building bricks in foundation & plinth in cement mortar 1:6 ( one cement : six approved sand )as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Brick work second class using common burnt clay building bricks in Super structure upto all floor tevel in cement mortar 1:6 ( one cement : six approved sand )as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Half brick work second class using common burnt clay building bricks in foundation & plinth in cement mortar 1:4 ( one cement : four approved sand ) as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Half brick work second class using common burnt clay building bricks in Super structure above all floor level in cement mortar 1:4 ( one cement : four approved sand ) as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

STONE WORK :-

Boulder filling dry hand packedunder flooring & behind retaining wall as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

WOOD WORK :-

Providing & fixing 100mm ( one hundred milimetre )bright finished brass floor door stopper with rubber cushion etc. to suit shutters thickness complete as per HPPWD specification 1990 volume-I ( One )including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing bright finished hard drawn hooks & eyes 250mm size ( Two hundred fifty milimetre size ) as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing factory made flush door 35mm ( Thirty five milimetre ) thick commercial board i.e. Non-decorative phenol bonded termite resistant & water proof core of block board construction with full frame of first class hard wood & well match commerical three ply veneer with vertical grain or cross band and face vaneer on both face of flush door I.S.I. marked IS No. 2202 of century ply board ( I ) Ltd. or its equivalent including black enamelled M.S. butt hinges as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing 30mm ( thirty milimetre ) thick second class deodar wood work for wire gauge shutters using galvanised mild steel wire gauge of I.S. gauge designation 85G with wire of dia 0.56mm ( Zero decimal fifty six milimetre ) for doors,windows & clerestory windows including bright finished black enamelled iron hinges with necessary screws as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing 19mm ( Nineteen milimetre ) thick commerical board shutters for S.D.B. & duct door including fixing with nickel plated piano hinges plated piano hinges with screws etc. complete as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing steel wire gauge shutters using galvanised M.S. wire gague of I.S.gague designation 85G with wire of dia 0.56mm ( Zero point fifty six milimetre ) for doors, windows & clerestory windows of standard rolled steel section joints mitred with fixing clips or with bolts & nuts as required & iron fittings complete including applying a priming coat of red lead paint & providing & fixing metal beading of approved shape & section with necessary screws etc. complete as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing oxidized mild steel sliding door bolts with nuts and screws etc. complete 300 x 16mm ( Three hundred into sixteen milimetre ) size as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing oxidized mild steel sliding door bolts with nuts and screws etc. complete 250 x 16mm ( Two hundred fifty into sixteen milimetre ) size as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing oxidized mild steel tower bolts ( Barrel type ) with necessary screws etc. complete 250 x 10mm ( Two hundred fifty into ten milimetre ) size as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing oxidized mild steel tower bolts ( Barrel type ) with necessary screws etc. complete 200 x 10mm ( Two hundred into ten milimeter ) size as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing oxidized mild steel tower bolts ( Barrel type ) with necessary screws etc. complete 100 x 10mm ( One hundred into ten milimeter ) size as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing oxidized Mild steel handles with the necessary screws etc. complete 125mm ( One hundred twenty five milimetre ) size as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing oxidized Mild steel handles with the necessary screws etc. complete 75mm ( Seventy five milimetre ) size as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing mild steel plain grills of required pattern in steel window frame etc. with mild steel flats 20 x 5mm ( twenty into five milimetre ) and 8 x 8 mm ( eight into eight milimetre ) Mild steel square bars in combination with or by screws distance between bars should not be more than 150 mm centre to centre total grills unit should be fixed to windows frames as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

PAVING & FLOORING :-

Automatic Vibro hydraulically compressed 20 mm ( Twenty milimeter) thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25mm (Twenty five milimeter ) average thickness of cement mortar 1:6 (One cement : Six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (Whenever required) including rubbing & polishing complete with tiles of silver grey shade as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Automatic Vibro hydraulically compressed 20 mm ( Twenty milimeter) thick with marble chips of specified sizes in skirting and risers of steps not exceeding 30 cm (Thirty centimeter ) in height and 10 mm ( Ten milimeter ) thick cement plaster 1:3 (One cement : three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (Whenever required) including rubbing & polishing complete with tiles of silver grey shade as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Extra for providing & fixing glass strips in joints of terrazzo floor 40mm ( forty milimetre ) wide & 4mm ( four milimetre ) thick as per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of Engineer-in-Charge.

40mm ( forty milimeter ) thick cement concrete flooring 1:2:4 ( One cement : two approved sand : four graded stone aggregte 20mm( twenty milimetre ) nominal size ) laid in one layer finished with a floating coat of neat cement in all floor level as per HP.PWD., specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entiresatisfaction of Engineer-in-Charge.

15mm ( fifteen milimetre )thick cement plaster skirting ( upto 30 cm.( thirty centimetre ) height ) with cement mortar 1:3 ( One cement : three approved sand ) finished with a floating coat of neat cement including rounding of junction with floor as per HP.PWD., specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of Engineer-in-Charge.

First class White glazed tiles 6mm ( six milimetre ) thick 30 x 45cm ( thirty into forty five milimetre ) in skirting,risers & dedo of Nitco, Kajaria / Orient etc. or equilevent of approved shade 12 mm ( tweleve milimeter ) thick cement mortar 1:3 ( One cement : three approved sand ) & jointed with cement slurry finished with flush pointing in white cement as per HP.PWD.,specification 1990 Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in Charge.

Providing & laying marble work ( Table rubbed and polished ) in flooring 20mm ( twenty milimetre ) thick base in cement mortar 1:3 ( one cement : three approved sand ) including jointing with cement mortar 1:2 ( One cement : two marble dust ) with an admixure of pigment to match the shade of the marble. 20mm ( twenty milimetre ) thick Baroda Green marble slab & shall have semi round nosing as per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in Charge.

ROOF COVERING :-

Providing and fixing on wall face PVC ( D-Plast ) rain water pipes of working pressure not less than 4.5 Kg ( Four decimal five kilogram ) per square meter including filling the joints with approved adhesive complete 100mm ( One hundred milimeter ) dia pipes as per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in Charge.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 110mm ( One hundred ten milimetre ) dia as per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in Charge.

Providing and fixing PVC Collars ISI marked approved design with steel screws and rawal plugs etc. complete 110mm ( One hundred ten milimetre ) dia as per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in Charge.

Providing and fixing PVC clamps ISI marked approved design with steel screws and rawal plugs etc. complete 110mm (One hundred ten milimetre ) dia as per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in Charge.

Prepainted steel sheetroofing over steel trusses of Kolermetal or equivelent prepainted single skin trepezoidal profile sheeting 0.60mm ( zero decimal six zero milimetre ) thickness having 1060mm( One thousand sixty milimetre ) cover with ( Overall width 1126mm ( one thousand one hundred twenty six milimetre) 28mm ( twenty eight milimetre ) crest depth at 353 + 2 ( three hundred fifty three plus two ) centre to centre crest distance. There will be two ribs at the centre for stiffening having crest depth of 2.5mm ( two decimal five milimetre ) . The main crest width at top of 25mm( twenty five milimetre ) & at lower 81mm( eighty one milimetre ) base metal of cold rolled steel coil with zinc coating. Top coat with regular modified polyster coating of approved shade and balancing reverse coat with polyster paint. Fixing of steel shall be with self drilling and self taping screws of size 5.5mm ( five decimal five milimetre ) dia & 5.5cm( five decimal five centimetre ) length with EDPM seal along with all fastenings etc. & flashing screws/ bolts and nuts etc.required for fixing the job complete in all respect. The material supply will be accompanied by test certificate and 20 years ( twenty years ) warrenty from company against corrosion, fading of colour and manufacturing defects as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing prepainted steel sheet ridges with proper GOLA or hips 0.6mm ( zero decimal six milimetre ) thick 60 cm ( sixty centimetre ) overall width fixed with necessarey self drilling screws and washers etc. of Kolermetal or equivelent prepainted single skin plain sheeting 0.6mm( zero decimal six milimetre ) thickness and base metal of cold rolled steel coil with zine coating. Top coat with regular modified polyster coating of approved shade and balancing reverse coat with polyster paint.Fixing of steel shall be with self drilling and self taping screws of size 5.5mm ( five decimal five milimeter ) dia & 5.5cm ( five decimal five centimetre )length with EDPM seal along with all fastenings etc. & flashing screws/ bolts and nuts etc.required for fixing the job complete in all respect. The material supply will be accompanied by test certificate and 20 years ( twenty years ) warrenty from company against corrosion, fading of colour and manufacturing defects as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing 30cm ( thirty centimetre) wide and minimum 30cm ( thirty centimetre ) deep plain G.I. sheet gutter with iron bracket 40x5mm ( forty into five milimetre ) size, bolts & nuts and washers etc.including making necessary connections with rain water pipes complete as per design 0.80mm ( Zero decimal eight zero milimetre ) thick as per HP.PWD., specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing M.S. B.P. sheet 1.66mm to 2mm ( One decimal six six milimetre to two milimetre )thick in eaves board/facia/soffits/ceiling including cutting fixing & welding to steel roof mambers and applying a coat of red lead primer complete as per the instruction of the Engineer-in-Charge ( Base member of steel work shall be measured & paid for separately )as per HP.PWD., specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

STEEL WORK :-

Providing & fixing angle iron door, windows,clerestory windows frame manufactured from steel iron section of 50 x 50 x 6 mm ( Fifty into fifty into six milimetre ) ,thickness including hinges jamb,lock jamb, beed & if required angle thrashold of mild steel angle 50 x25mm ( fifty into twenty five milimetre ) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm ( Two decimal five milimetre ) thick with provision of locking arrangement & shock absorber as specified & applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-Charge as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing angle iron cup board frames manufactured from steel iron section of 25 x 25 x 5 mm ( Twenty five into twenty five into five milimetre ) ,thickness including hinges jamb,lock jamb, beed & if required angle thrashold of mild steel angle 25 x25mm ( twenty five into twenty five milimetre ) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm ( Two decimal five milimetre ) thick with provision of locking arrangement & shock absorber as specified & applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-Charge as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing Mild steel Channels in doors,windows frames,manufactured from Mild steel channels section of size 75 x 40mm ( Seventy five into forty milimetre ),M.S. flat 75x4mm ( Seventy five into four milimetre ) combination as per design drawing including hinges, Jambs,beed & if required angle thrashold of mild steel angles,lugs with split end tails to each jamb including steel nuts hinges 2.5mm thick with provision of locking arrangement & shock observers & specified and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-Charge as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Steel work in built up section, trusses & framed work, including cutting,hoisting & fixing in position and applying a priming coat of red lead paint

in trusses and trussed purlins in building as per HPPWD., specification 1990 volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

in grating framed guards, bars, ladders,railing,brackets & similar works. as per specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing MS round holding down or anchor bolts with nuts and washers plates complete as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing mild steel fan clamp type-I of 16mm ( sixteen milimeter ) dia mild steel bar bent to shape with hooked ends in Reinforced cement concrete slab during laying including painting the exposed portion of loop, all as per standard design complete as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing steel glazed doors,windows & ventilators of standard rolled steel section joints mitred and welded with 16X3.15 mm ( Sixteen into three point one five milimeter ) lugs 10 cm (Ten centimeter ) long embedded in cement concrete block 15cmX10cmX10cm size of 1:3:6 (One cement:threesand:six stone aggregate 20mm (Twenty milimeter ) size or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings, including providing and fixing of glass pans with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Steel windows Fixed steel windows as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Steel windows Side hung windows as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Top Hung ventilators as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

PAINTING & POLISHING :-

Painting two coats ( excluding priming coat ) on new steel & other metal surface with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust & other foreign matters with other then white as per HPPWD specification 1990 Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Applying priming coat over new wood & wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt & other foreign matter, sand papering & knotting ready mixed paint brushing primer pink as per HPPWD specification Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Painting two coats ( excluding priming coat ) on new wood & wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust & other foreign matter sand papering & stopping with enamel paint other than white as per HPPWD specification 1990 Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Applying Birla .white wall care putty over plastered surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papering smooth to give final matter finish to surface complete as per HP.PWD., specification Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Applying one coat of Acrylic primer (Spectrum or equivelent of superior quality ) on new concrete/ masonry/plastered surfaces after & including preparing the surface by thoroughly brushing the surface free from mortar dropings and other foreign matter sand papering smooth the surface complete as per HP.PWD., specification Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Finishing wall with weather proof exterior grade premium emulsion of approved design (Apex utima ) or its equivelent or approved shade on undecorated wall surface ( two coats ) to give an even shade & final finish after thoroughly cleaning the surface to remove all dirt, dust & other foreign matter etc. including sand papering smooth in all external plastered surfaces as per HP.PWD., specification 1990 Volume-I ( one )including carriage of all labourequipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

PLASTERING, DISTEMPERING & OTHER FINISHES :-

6mm ( six milimetre ) cement plaster to ceiling with cement mortar 1:3 ( One cement : three approved sand )as per HP.PWD., specification 1990 Volume-I ( one )including carriage of all labourequipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

15mm ( fifteen milimetre ) cement plaster in single coat on rough side of brick/ concrete/stone walls of interior plastering upto floor two level including arrises,internal rounded angles, chamfers & rounded angles not exceeding 80mm in ( eighty milimetre ) grith finished even and smooth in cement mortar 1:6 ( One cement : six approved sand) as per HP.PWD.,specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

15mm ( fifteen milimetre ) cement plaster in single coat on fair side of brick/ concrete/stone walls of interior plastering upto floor two level including arrises,internal rounded angles, chamfers & rounded angles not exceeding 80mm in ( eighty milimetre ) grith finished even and smooth in cement mortar 1:6 ( One cement : six approved sand) as per HP.PWD.,specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

15mm (fifteen milimetre)cement plaster in single coat on fair side of brick/concrete/stone walls of interior plastering upto floor two level including arrises,internal rounded angles, chamfers & rounded angles not exceeding 80mm in (eighty milimetre) grith finished even and smooth in cement mortar 1:4(One cement:four approved sand) as per HP.PWD.,specification volume-I (one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Distempering two coats with oil bound washable distemper ( Tractor Synthetic washable distemper or Asian/Narolac Paints or its equivelent ) of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat of distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including preparing the surface even and sand papering smooth as per HP.PWD.,specification 1990 volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Distempering with dry distemper with fevicol mix of approved brand and manufacture ( two coats )and of required shade on un-decoarted wall surface to give an even shade over & including a priming coat of whiting after thoroughly brushing the surface free from mortar dropping and other foreign matter including preparing the surface even and sand papered smooth as per HPPWD,specification 1990 volume-I including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

MISCELLANEOUS WORK :-

Providing under layer for plinth protection of 75mm ( Seventy five milimetre ) thick ( Unconsolidated ) bed of dry/stone aggregate 40mm( forty milimetre ) nominal size with rammed and consolidated and grouted with fine sand including preparation of ground as per HP.PWD.,specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing plinth protection 50mm ( fifty milimetre ) thick in cement concrete 1 : 3 : 6 ( One cement : three sand : six graded stone aggregate 20mm nominal size ) as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Constructing course rubble hammer dressed " U " shape open surface drain with side wall 15x22 cm(fifteen into twenty two centimetre) in cement mortar 1:6 ( one cement : six approved sand ) & inside plastering with cement plaster 1 : 3( One cement : three approved sand ) including earth work & laying 10cm ( ten centimetre ) cement concrete in 1:5:10 ( One cement : five approved sand : ten graded stone aggregate of 40mm( forty milimetre) nominal size ) & 7.5cm ( Seven decimal seven milimeter )cement concrete 1:2:4 ( one cement : two approved sand : four graded stone aggregate of 20mm ( twenty milimetre )nominal size ) & finished with floating coat of neat cement complete as per standard design as per HP.PWD.,specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

WATER SUPPLY & SANITARY INSTALLATION :-

Providing & laying in trenches, galvanised mild steel tubes ( Medium grade ) , tube fitting ( earth work in trenches to be measured & paid for separately )

15 mm ( Fifteen milimetre ) nominal bore as per HP.PWD., Specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

20 mm ( Twenty milimetre ) nominal bore as per HP.PWD., Specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes ( Medium grade ) tube fitting and clamps including making good the wall, ceiling & floor

15 mm ( Fifteen milimetre ) nominal bore as per HP.PWD., Specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

20 mm ( Twenty milimetre ) nominal bore as per HP.PWD., Specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Fixing water metre stop cock in galvanised mild steel tube including necessary fitting such as mild steel galvanised jam nuts,sockets, etc. cutting & making long screws, complete ( Water metre & stop cock to be measured & paid for separately

15 mm ( Fifteen milimetre ) nominal bore as per HP.PWD., Specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PVC water storage tank of ISI 12701 marked,G.I. inlet & outlet connection,15mm nominal bore ball valve & mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level

500 ( Five hundred ) litre net capacity tank as per HP.PWD., Specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Construction chamber 300mm x 300mm x 500mm ( Three hundred milimetreinto three hundred milimetre into five hundred milimetre ) inside size for stop cock with C.I. surface box 100mm x 100mm x 75mm ( one hundred milimetre into one hundred milimetre into seventy five milimetre )( inside ) with hinged cover fixed in cement concrete slab 1:2:4 ( one cement : two approved sand:four graded crushed stone aggregate 20mm nominal size ) 75mm thick foundation concrete 1:5:10 (one cement:five approved sand:ten graded crushed stone aggregate 40mm ( forty milimetre ) nominal size ) & inside plastering with cement mortar 1:3 ( One cement:three approved sand)finished with a floating coat of neat cement including curing complete, with 100mm ( one hundred milimeter )thick walls of brick masonry in cement mortar 1:5 ( One cement : five approved sand ) as per HPPWD.,specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete. :-

150mm (One hundred fifty milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

110mm (One hundred ten milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

75mm ( Seventy five milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PVC Plain bend ISI marked including fixing with approved adhesive etc. complete

150mm (One hundred fifty milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

110mm (One hundred ten milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

75mm ( Seventy five milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc. complete

150mm (One hundred fifty milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

110mm (One hundred ten milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

75mm ( Seventy five milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PVC Off set 45 ISI marked including fixing with approved adhesive etc. complete.

150mm (One hundred fifty milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

110mm (One hundred ten milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PVC Single equal branch with oval access door of ISI marked insertion rubber washer 3mm ( three milimetre ) thick bolts & nutds complete including fixing with approved adhesive etc. complete.

150mm (One hundred fifty milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

110mm (One hundred ten milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PVC PVC Plain double equal branch ISI marked complete including fixing with approved adhesive etc. complete.

150mm (One hundred fifty milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

110mm (One hundred ten milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PVC clamps ISI marked including fixing with approved adhesive etc. complete

150mm (One hundred fifty milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

110mm (One hundred ten milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

75mm ( Seventy five milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PVC Cowl for ventilating pipes for rain water pipe or soil waiste pipe 75 mm ( Seventy five milimetre ) dia PVC Cowl as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing cast iron floor trap of self cleaning design with sand cast iron screwed down or hinged grating without vent arm complete including cost of cutting & making good the walls & floors :-

110 mm x 90 mm ( One hundred ten milimetre into ninety milimetre ) size as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

110 mm x 75 mm ( One hundred ten milimetre into Seventy milimetre ) size as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing Vitreous China wash down water closet ( Orrisa pattern ) Orrisa Pan W.C.No. 2071 size 58 x 44cm ( Fifty eight into forty four centimetre ) in white shade of Cera or its equivelent ( Earth work, bed concrete,foot rest & trap to be measured & paid for separtely ) as per HP.PWD., specification Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PVC " P " or " S " trap for water closet (Squatting pan) ISI marked including jointing the trap with the pan & PVC pipe with approved adhesive etc. complete 110mm ( One hundred ten milimetre ) dia as per HP.PWD.,specification Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing in cement mortar 1:3 ( one cement : three approved sand ), a pair of vitreous China 250mm x 130mm x 30mm ( two hundred milimetre into one hundred thirty milimetre into thirty milimetre ) foot rests for long pattern squatting Pan water closet as per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing 10 ltr. ( Ten litre ) net capacity first quality white shade low level flushing cistern ( with duel flushing cisern ) item No. 502 ISI marked No.7231 of prayag sanitary Hardware or its equvelent with a pair of C.I. or mild steel brackets complete with fitting such as lead valveness syphon 15mm( fifteen milimeter ) nominal size PVC brass valve with polythene float,with push button,couplings for connections with inlet,outlet & over flow pipes, 40mm ( forty milimeter ) dia C.P. flush bend including cutting holes in walls & making good the same & connecting the flush bend with cistern and closet ( Overflow pipe to be measured & paid for separately )as per HP.PWD., specification Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing in position brass mosquito proof coupling for over flow pipe of 25mm ( twenty five milimetre ) nominal dia ( Over flow pipe to be measured and paid for separatel ) as per HP.PWD., specification Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing Vitreous China wash basin with single hole for pillar tap with C.I. Or M.S. brackets painted white including cutting holes & making good the same but excluding fitting flat back white shade No. 102012 of clear size 580 x 400mm ( five hundred eighty into four hundred milimetre ) with pedestal of Hindware or its equivelent as per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-Engineer-in-charge.

Providing & fixing Vitreous China Pedestal for wash basin complete recessed at the back for reception of pipes & fittings as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing stainless steel kitchen sink of approved standard ISI marked No. 1022-XD of 470x420mm ( Four hundred seventy into four hundred twenty milimetre )with bowl depth 178mm ( One hundred seventy eight milimetre )of Prayag polymers or its equivelent with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

P/F C.P. brass Chain 50mm long & rubber plug of following size for sink or wash basin 32mm ( thirty two milimetre ) dia as per HP.PWD., specification 1990 Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing M.I. union for wash basin or sink 32mm ( Thirty two milimetre ) dia as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing C.P. brass waste for wash basin or sink 32mm ( Thirty two milimeter ) dia as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing C.P. brass" S "trap for wash basin or sink 32mm(Thirty two milimeter ) dia as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing 100mm (One hundred milimetre)sand cast iron grating for gully, floor or Nahni trap as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing 600mm x 450mm ( six hundred milimetre into for hundred fifty milimetre ) bevelled edge mirrior of superior glass mounted on 6mm (six milimeter ) thick A.C. sheet or plywood sheet & fixed to wooden plugs with C.P.brass screws & washers as per HP.PWD., specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing C.P. brass Towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws 750mmx20mm ( Seven hundred fifty milimetre into twenty milimetre )as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing 600mm x 120mm (six hundred milimetre into one hundred twenty milimetre) glass shelf with C.P. brass brackets & Guard rail complete,fixed to wooden plugs with C.P. brass screws as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing Toilet paper holder, C.P. brass as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing Liquid soad container with C.P. brass lid & brackets fixed to wooden plugs with C.P. brass screws glass container as per HP.PWD.,specificationVolume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing Chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P.brass screws as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing brass bib tap ( superior or heavy type ) 15mm dia ( fifteen milimetre ) dia as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing C.P. brass pillar tap with capstan head 15mm dia ( fifteen milimeter ) dia as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing C.P. stop cock 15mm dia ( fifteen milimetre ) dia as as per HP.PWD., specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing C.P. brass angle valve 15mm ( fifteen milimetre ) without nuts & pipe ( fifteen milimetre ) dia as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Constructing manhole with R.C.C. top slab in 1:2:4 mix ( One cement : two approved sand : four graded stone aggregate 20mm ( twenty milimetre ) nominal size ) foundation concrete 1:4:8 ( one cement : four approved sand : eight graded stone aggregate 40mm nominal size ) inside plastering 15mm ( fifteen milimetre ) thick with cement mortar 1:3 ( one cement : three approved sand )finished with a floating coat of neat cement & making channels in concrete 1:2:4 mix ( One cement : two approved sand : four graded stone aggregate 20mm ( twenty milimetre )nominal size ) finished smooth complete including curing & testing inside size 800 x 800 x 500mm ( eight hundred into eight hundred into five hundred milimetre ) deep including C.I. cover with frame ( Light duty single seal pattern ) 455mm x 610 mm ( four hundred fifty five milimetre into six hundred ten milimetre ) internal dimensions total weight of cover and frame to be not less than 38 Kg ( thirty eight kilogram )(Weight of cover 23Kg( twenty three kilogram ) and weight of frame 15 Kg ( fifteen kilogram ) with 200mm ( two hundred milimeter ) thick wall of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( one cement : three approved sand ) as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing 15mm mixer for kitchen sink with top/ bottom swining spot of superior quality as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & laying brick aggregate (One size) 50mm ( fifty milimetre )nominal size ) for soak pit as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing weep holes in brick masonry/ stone masonry/plain/reinforced concrete abutment, wing wall,return wall with 100mm ( One hundred milimetre ) dia PVC pipe extending through the full width of the structures with slope of 1 ( V ) : 20 ( H ) towards drawing face complete as per drawing and technical specification clause 614, 709,1204.3.7 as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Back filling behind abutment, wing wall and return wall complete as per drawing & technical specification clause 1204.3.8. Granular material as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

PREM SINGH