Repairs to plastering masonry tilling work roof treatment plumbing at Subarato Golden Jubilee Sarada Park Offr Accn Dhobighat (Outer pocket) at AFS Jodhpur under AGE BR-I GE AF No 2 Jodhpur

Amount

Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc.complete.

M&L for Rendering 10mm thick on fair faces of any type of work in CM 1:6 finished even and smooth without using exctra cement complete all as specified and directed.

M&L for 5mm thick rendering in CM(1:3) on ceiling/soffit/chajja etc stone/concrete surface in any possition, finish even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound ISI marked as directed by Engineer-in-Charge

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali-resiatant primer and 1.5 mm thick Birla wall care putty on plastered surrfaces complete all as specified.

M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

M & L for plain cement concrete type B1 1:2:4 ( with 20mm graded aggregate) as in floors 40mm thick finishing cement concrete surface even and smooth with out using extra cement.

M&L 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection finished surface even and fair without using extra cement all as specified and as directed by Engineer-in-Charge.

S&F in repair 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete(minimum weight 450 gms).

S&F in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule(minimum weight 450 gms).

S&F in repairs, 15 mm bore stop valve, fancy type, chromium plated with long shank and cup (concealed type), /(angle type)screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions.

Taking up or down steel tubing 15 mm bore and connections including cleaning for refixing or removing from site.

Taking up or down steel tubing 20 mm bore and connections including cleaning for refixing or removing from site.

Taking up or down steel tubing 25 mm bore and connections including cleaning for refixing or removing from site.

Supply and laying 15 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Supply and laying 20 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Supply and laying 25 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

S&F in repairs plastic water closet seat cover white or any colour closed padestrial pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixed complete all as specified.

S&F in repairs PVC valveless, syphonic action type, high or low level flushing cistern, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets and connections to pies an fixing of chain and pull, or lever.

S&F in repairs internal flushing cistern kit, washer, flushing handles etc.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F in repair single mirror bath room cabinet moulded body and frame (made from strong and fine quality ABS plastic) with hinged door of size 16"x12"6" white or ivory colour fixed on wall with appropriate rawl plug Make : Prayag/Polytuff or equivalent

S&F in repairs brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union.

S&F in Repairs shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) ccomplete all as specified and directed.

S&F in repairs grating doom 125 mm dia with or without waste hole of PTMT (minimum weight 40 gms) and fixing with gray or white cement.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm.

Disconnecting existing tanks of any description exc. 250 ltrs and n.exc. 500 ltrs capacity and removing from site to store.

Disconnecting existing tanks of any description exc. 500 ltrs and n.exc. 1000 ltrs capacity and removing from site to store.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed with two 25mm nipples and one 15mm nipple. (Minimum weight of ball valve - 210 gms)

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed with two 25mm nipples and one 15mm nipple. (Minimum weight of ball valve - 210 gms)

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc, including cleaning or refixing or removal from site all as specified and directed. (measured overall as fixed along the centre line over fittings and accessories)

S&F 75 mm bore UPVC (SWR) pipes type ‘A’, single socketed, in any length with rubber ring joints fixed to walls.

S&F 110 mm bore UPVC (SWR) pipes type ‘A’, single socketed, in any length with rubber ring joints fixed to walls.

S&F in repairs PVC (SWR) door bends 110 mm dia with acess door

-do- but 75 mm dia..with acess door

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexble tube ABS wall hook including making connections and fixed complete in all respect as specified

S&F in repairs PVC waste pipe of 32 mm bore of suitable length for WHB/urinal/sink, complete all as specified.

S&F in repairs brass CP wall/pillar mixer for mixing hot & cold water screwed down for 15 mm bore fixed with necessary cutting, jointing complete all as specified and directed.

S&F in repairs 15 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe.

S&F in repairs 20 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe.

S&F in repairs 25 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe.

S&F in repairs waste coupling of PTMT for wash basin (half or full threaded) 32 mm bore of discharge pipe,(Minimum weight– 45 gms.)

S&F in repairs for toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repairs brass aluminium anodised towel rail, 20mm dia, D type, 60cm long between flanges.

S&F in repairs stainless steel soap dish made of stainless steel 1.00mm thick, approximate 150x150 mm fixed to plugs with chromium plated brass screws.

S&F PVC lid of PVC water tank suitable for 500/1000 litres capacity fixing to existing water tank with necessary fixing arrangment at any position.

S&F in repairs brass chromium plated health faucet of 15 mm bore with 1.2m braided hose pipe with holder as per approved by Engr-in-charge.

M&L for repairs to leakage in existing 15 mm bore pipe line by providing elbow/union/socket/tank nipple/nipple up to 200 mm all as directed by Engineer-in-Charge.

M&L for repairs to leakage in existing 20 mm bore pipe line by providing elbow/union/socket/tank nipple/nipple up to 200 mm all as directed by Engineer-in-Charge.

M&L for repairs to leakage in existing 25 mm bore pipe line by providing elbow/union/socket/tank nipple/nipple up to 200 mm all as directed by Engineer-in-Charge.

M&L for repairs to leakage in floors of WC/Bath Room/Kitchen by breaking of existing floor and providing new PVC (SWR) floor trap, suitable for type ‘B’ pipes, 75 mm dia of outlet, plain with grating including jointing with solvent cement and making good floor to match with existing floor all as directed by Engineer-in-Charge.

S&F in repairs PVC flush bend pipe 32mm dia for PVC 10 litre flushing cistern suitable for EWC/IWC all as directed by Engineer-in-Charge.

M&L for repairs to leakage of any type by providing M-Seal all as directed by Engineer-in-Charge.

M&L for Clear air lock from tank to kitchen,bath,wc and WHB by opening GI pipe/nipple,elbow,socket,union and other possible way etc each all as directed by Engineer-in-Charge.

Dismantling floor,hearth or wall tiling including cement motrar bedding cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises

M&L for joint free non skid ceramic tiles, coloured, 7 to 8 mm thick in floors and skirting etc. (square/rectangular) area of each tile exc. 0.18 sqm but n. exc. 0.36 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 as directed by Engineer-in-Charge

M&L for glazed ceramic tiles, coloured, 450x300x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone or brick masonry surfaces as directed by Engineer-in-Charge.

S&F in repair sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410mm x 330 mm x 160 mm and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580mm x 440mm, white with integral foot rests, including PVC 'P' trap, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified.

S&F in repairs stainless steel plate rack, 0.56mm thick of standard pattern, of size 788x915x254mm (31"x36"x10") complete all as specified and directed

S&F in repairs waste coupling of PTMT for wash basin (half or full threaded) 40mm bore of discharge pipe,(Minimum weight– 45 gms.)

Jet spray triangle nozzle or butterfly type stainless steel jet spray 304 grade minimum 2feet all as directed by Engineer-In-Charge

Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment tomatch the shade of granite stone including grinding and polishing over 20 mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 completed all as directed by Engineer-in-Charge

Demolition of brick work or stone masonary built in cement mortar complete all as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for (roof padding, flooring above ground floors) including roof treatment and removing from site all as specified and directed.

M&L for 50 mm thick (average) cement concrete 1:3:6 type C-0 mix (12.5 mm graded stone aggregate) in padding over roof.

M&L for 10 mm thick rendering in CM 1:3 over concrete surfaces (Roof) mixed with water proofing compound @ 3% by weight of cement complete all as specified. NOTE : Water proofing compound shall be measured and paid for separately as “Supply only”

M&L for complete removal of existing Old App membrane treatment from roof surface complete all as specified and as directed by Engineer-in-Charge.

M&L for applying roof treatment on top of roof with APP modified membrane (minimum 3 mm thick) with non-woven polyster reinforcement/mat (centre core) with thermal insulation with white mineral gravel finish on upper side of membrane laid by torch application method with overlaps 100mm on length side and 100 mm on the width side as per manufacturer’s instructions over and including a coat of approved cold applied bituminous oil based primer (IS- 3384) @ 250 gm/sqm over cleaned roof surface complete all as specified and as directed by Engineer-in-Charge.

M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed.

M&L Keyed pointing on squared rubble masonry coursed or uncoursed (Bangalore Pattern) in cement mortar 1:4

M/S MAJISA CONSTRUCTIONS